Description
STANDARD CONFIGURATION as follows:
- 48"x 48" x 6" cutting area
- Advanced brushless Servo System
- Milwaukee 3.5 HP Variable Speed Router
- Standard 3 axis with Dual Drive on the "Y" Axis
- Router on/off via "G" code and control PC
- Sealed MDF Tabletop
- Hiwin bearings and rails on all axis
- Dust boot
- E Stop
- Z Touch Pad
- Limit switches on all axis with soft limits
- Welded Frame
- V Carve Pro Design Software
- WINCNC Windows PC based CNC control system with PC, keyboard. mouse, & flat LCD monitor
- Spindle speed control from WINCNC. This option gives the user precise control of spindle RPM
- Operates on 220-230V Single Phase Power
- Includes 1/8", 1/4", 3/8", & 1/2" ER25 collets
- Standard 3 axis with Dual Drive on the "Y" Axis
UPGRADES:
- 3.0 KW (4.2 hp) High Frequency Spindle from HSD (ER 25)
- Indexing Lathe - up to 48" long and up to 10" diameter, comes with 4 jaw chuck & live center
- 2" Gantry lift
Stinger performance package Pro
- Fast Tool Change (FTC) not to be mistaken for Automatic tool change (ATC)
This machine does not have ATC
- Laser cross hair for quickly setting up your job home and zero out your X,Y axis
- Counter balance to assist in the Z axis spindle motion
- Spindle neck mount LED light ring
- Hand held controller
- Stinger maintenance kit
- Grease gun
- 7 piece Hiwin adapter kit for 15mm bearings
- Two grease tubes
-INCRA T-Slot System: includes 5 rails and 6 clamps. The rails are bolted down using nuts and washers on the underside, so the rails will not lift when tightening the clamps.
- Added the sacrificial MDF cutting surface
- Removable staging/working surface over power panel. Also, very useful in minimizing chips and dust from getting into panel.
Things to note:
1. This is an awesome, very well maintained industrial grade machine.
2. The machine weighs around 1500 lbs.
3. I can demonstrate the functionality of the machine by powering it up, initializing it (establish X,Y,Z home) and demonstrate the functionality of the handheld controller.
4. I have a contact number of a local equipment mover if the buyer is interested, otherwise the buyer will need to arrange for a forklift and truck/trailer to transport to your location.
5. Serious cash buyers only
Must see to appreciate.
Asking $20,000 - negotiable
Thank you for your time and interest
Have a great day