WOODPRO - Species Selection Made Easy
A free complete working computer program (that can be downloaded at WOODWEB), allowing woodworkers to select the most suitable wood species for any particular application - 1997

Stabilizing Wood with Polyethylene Glycol
Advice and explanations about using PEG to prevent shrinkage and cracking in heavy wood disks being dried for a specialty application. July 15, 2014

Tree Burls — Causes and Value
Burls from a tree trunk can yield valuable material for custom craft work. Here's some info on what they are and why they appear. June 14, 2014

Sawing for Wood-Turners
Wood-turners, carvers, and other artists provide a market for figured wood in short lengths or chunks. December 6, 2011

Which Grinder for Sharpening Lathe Tools
Sharpening suggestions from satisfied sharpeners. March 28, 2012

Whether to Kiln-Dry Wood Before Turning
A woodworker is advised to kiln-dry Osage Orange wood (also referred to as "Hedge") before gluing up blanks for turning bowls. October 19, 2014

The Look of Hand-Hewn with Power Tools
A curved power-planer or planer knife can approximate the look, but for the real thing you need the hand tool (an adze). December 15, 2005

Selling Basswood to Carvers
Woodcarvers pay good money for Basswood in the right size and condition. February 3, 2011


Working Green Versus Dry Hickory
Yes, it's true: green Hickory or Oak is much easier to work by hand than dried wood. March 13, 2014

Sanding Carved Profiles
A small sand-blaster can be used for smoothing intricate carved profiles. September 19, 2009

Medieval Woodworking, Architecture, Social Power, Space Shuttles, and Hand-Carved Wood Waffle Irons
Excellent adventure or bogus journey? You had to be there. March 20, 2012

Rosette Cutting Speed
Drill press RPMs tend to be too slow for great success with machining rosettes, especially in difficult wood. May 21, 2009

Options for Carving on Cabinet Doors
A cabinetmaker looks for practical ways to make bas-relief carvings on wood cabinet door faces. September 23, 2006

Routing an Irregular Outline
Woodworkers compare a pin router to a CNC as the device for cutting the outline of a map or other irregular object. February 19, 2013

Making Custom Molds for Storing Objects
Thoughts on two ways to make form-fitting pockets: moldable materials, or CAD/CNC imaging. March 28, 2015

Hand Hewn Look for New Cabinetry
Achieving an old-fashioned look with antique and contemporary tools. May 10, 2005

Machinery for Making Rosettes
Specialized equipment works better than a standard drill press for cutting rosettes. September 27, 2008

Identifying "Diamond Willow"
Woodweb members recognize the unique shape of "diamond willow." Here's a photo. February 1, 2015

Compound Curves: Circle Applied to a Cylinder
Problem: Create a curved molding shaped like a Frisbee wrapped around a drum. May 23, 2011

Creating a Hand-Hewn Look on Cabinet Doors
Depending on exactly what you want, there are several ways to get a scooped-out, scalloped, rippled look on a wood surface. October 11, 2007

Dishing Out Chair Seats
Here's a whole slew of ideas for crafting solid wood chair seats. October 17, 2012

Carving Machines
Here's a quick introduction to some of the high-tech, high-volume carving and duplication machinery that is now available. September 20, 2008

Drying Bowl Blanks
One woodturner reports success with an alcohol pre-soak method. January 13, 2006

Cutting a spiral groove
Suggestions on how to cut a clean spiral groove. June 13, 2001

Cutting State Outlines from Wood
Ideas for machining complex outlines from solid wood slabs. April 20, 2011

An Ax to Grind - A Practical Ax Manual
History, maintenance tips, and how-to for that ancient woodworking tool, the axe. December 21, 2009

Today's Sponsors
  • Vexor Custom Woodworking Tools, Inc.
    Custom and Standard Router Bits, Shaper Cutters, Profile Knives, Multi Profile Insert Tooling and More
  • Air Handling Systems
    Your Best Source for Dust and Fume Collection
  • KCD Software
    Powerful 3D Cabinet/Closet Design Software with Built-In Touchscreen Mode for Mobile Use with Best Production Practices Including Direct to Cut List, Cabinotch and/or CNC Machining
  • Denray Machine
    Quality Dust Filtration Systems Provided by an Industry Leader in Wood, Metal, and Many Other Dust Control Applications
  • TotalFinishingSUPPLIES.com
    Solutions and supplies from spray tips to spray booths for all your woodworking needs
  • MachineryMax
    New and Used Machinery for the Professional Woodworker
  • Simantech
    New & Used Machinery, Supplies, Tooling, Parts, and Abrasive Products
  • Industrial CNC
    Affordable, Easy, Industrial Grade CNC Routers for Woodworking and Cabinetmaking - Free Lifetime Support
  • Excel Dowel and Wood Products Inc.
    Plain and Pre-glued Dowel Pins, and Wood Parts - Servicing Small Hobby Shops to Large OEM's
  • Western Dovetail
    Custom Made Dovetail Drawers
  • Felder USA
    High Quality Woodworking Machines and Tools
  • Holz-Her US Inc.
    Custom Edgebanders, Vertical Panel Saws, CNC Beam Saws, Wide Belt Sanders, CNC Point to Point Boring Machines, CNC Routers
  • Scarlett Machinery Inc.
    New and Used CNC Routers and Used Woodworking Machinery, for Operations Ranging From Small Woodworking Shops to Large Progressive Manufacturing Plants

Become a Sponsor today!