Instructions: Softwood Board Footage CalculatorNominal Thickness:
Choose the nominal thickness, in inches, from the drop down list.
Choose the nominal width, in inches, from the drop down list.
Enter lumber length reducing if necessary to the nearest foot. Any inches entered (in length) will not be considered during the calculation. This is accepted practice when calculating softwood lumber board footage.
If you have any questions regarding the methodology used in WOODWEB's Softwood Board Footage Calculator, we suggest that you post your question at our
Sawing and Drying Forum.
Click Here to Access the Softwood Board Footage Calculator
All rights reserved. No part of this publication may be reproduced in any manner without permission of the Editor.
Review WOODWEB's Copyright Policy.
The editors, writers, and staff at WOODWEB try to promote safe practices. What is safe for one woodworker under certain conditions may not be safe for others in different circumstances. Readers should undertake the use of materials and methods discussed at WOODWEB after considerate evaluation, and at their own risk.
335 Bedell Road
Montrose, PA 18801
Contact WOODWEB Copyright © 1996-2020 - WOODWEB ® Inc.