Instructions: Wood Shrinkage CalculatorWidth:
Enter the actual measured width of the lumber, in inches and fractions of an inch (centimeters, if metric).
Initial Moisture Content:
Enter the initial moisture content(MC). Do not enter decimals or fractions, and do not enter the percentage sign after the value. Values over 30% MC will be calculated as 30% MC. It is generally accepted changes in MC above 30% do not affect dimension because free water is present.
Final Moisture Content:
Enter the final moisture content(MC). Do not enter decimals or fractions, and do not enter the percentage sign after the value. Values over 30% MC will be calculated as 30% MC.
Type of Lumber:
By default, flatsawn is the type of lumber chosen. If you would like to calculate the shrinkage for radialsawn lumber, choose the radialsawn option.
Detailed reference material regarding the calculation of Wood Shrinkage can be accessed via the links below. If you have any questions regarding the methodology used in WOODWEB's Wood Shrinkage calculator, we suggest that you post your question at our
Sawing and Drying Forum.
Click Here to Access the Wood Shrinkage Calculator
All rights reserved. No part of this publication may be reproduced in any manner without permission of the Editor.
Review WOODWEB's Copyright Policy.
The editors, writers, and staff at WOODWEB try to promote safe practices. What is safe for one woodworker under certain conditions may not be safe for others in different circumstances. Readers should undertake the use of materials and methods discussed at WOODWEB after considerate evaluation, and at their own risk.
335 Bedell Road
Montrose, PA 18801
Contact WOODWEB Copyright © 1996-2021 - WOODWEB ® Inc.