WOODWEB - the leading resource for professional woodworkers


 Home » Choose Forums to Display » Most Recent Posts
 


Forums      Return to Previous Page || Return to the page you were originally viewing



Adhesives Forum

  • aluminum to styrofoam bonding   (6/1)

  • drum sander   (5/10)

  • Dispensing glue from a barrel   (4/29)

  • most water-resistant laminate glue method?   (4/8)

  • Adhesive that bonds UV coated Wood   (3/6)

  • Combi Core Plywood   (2/21)

  • Edge Gluing Hard Maple   (2/21)

  • FASTER Spray Glue techniques   (2/19)

  • adhesives over finishes   (2/7)

  • adhesive from 1978   (1/11)




  • Architectural Woodworking Forum

  • Cherry / Maple Project   (6/25)

  • Wooden sink   (6/17)

  • Heating a Cast Iron Saw Table   (6/5)

  • Front door   (6/1)

  • Kitchen Cabinet Doors   (5/28)

  • Getting really nice lumber   (5/22)

  • Glue choice   (5/17)

  • Glass rail system   (5/17)

  • gluing Boards for shiplap   (5/9)

  • Architectural panel what?   (5/1)




  • Business Forum

  • Certifications   (6/25)

  • Schedule Adjusments   (6/14)

  • Does Anyone Order Door Glass Online?   (6/12)

  • Texting and clients/ Designers   (6/1)

  • Financing projects   (5/22)

  • Commercial bidding   (5/22)

  • Long Term insurance requirements   (5/18)

  • Shop Floor Paint   (5/15)

  • Travel and hotel charges   (5/9)

  • Quickbooks software?   (5/2)




  • Cabinetmaking

  • Salice hinge & plate   (6/25)

  • Selco Mechanic Charlotte NC area   (6/24)

  • INSET FRAMES   (6/24)

  • Cabinet assembly workstation   (6/23)

  • Cost of PUR   (6/23)

  • wide belt sander   (6/21)

  • Metal Wine Insert source   (6/20)

  • Looking for shaper cutter   (6/19)

  • automatic edgebander   (6/19)

  • Brandt Edgebander Premil insert life seems short   (6/19)




  • Forums: CAD

  • CV 11 Engraving Cabinet Numbers in Part via UCS   (6/25)

  • ucs to modify doors in cv11   (6/21)

  • Changing doors reveals in Cabinet vision   (6/13)

  • Modifying v67 repots   (6/12)

  • cabinet vision   (6/10)

  • Cabinet Design Times   (6/9)

  • High End-- Low End   (6/4)

  • Selling Cabinet Vision. Transfer Fee   (6/3)

  • Router-Cim 2006 setup   (5/30)

  • Upgrade from Biessework advanced to Bsuite   (5/22)




  • Forums: CNC

  • MPR vs NC Programming   (6/25)

  • Weeke CNC--Independent Tech needed   (6/18)

  • CNC Software   (6/14)

  • simple question: editing a forum post   (6/9)

  • Alphacam AUTOSTYLES   (6/9)

  • Enroute 6 post processor   (6/8)

  • Biesse Rover A 1332 Edge   (6/7)

  • Need Beam Saw Packed Near Cincinnati.   (6/5)

  • Cabinet Vision Labeling   (6/5)

  • Multicam Service Tech   (6/5)




  • Forums: Commercial Kiln Drying Forum

  • Shade Dry   (4/15)

  • warp twist/degrade   (1/15)

  • Kiln Drying Workshop - Syracuse - Jan 7-10, 2019   (12/17)

  • MC ideal for laminated wood flooring stock   (11/26)

  • need 12/4 Walnut schedule   (9/10)

  • 8/4 white oak   (5/26)

  • walnut drying rate   (5/22)

  • NEKDA - May 2-3   (4/23)

  • Advanced Lumber Drying Workshop   (4/23)

  • Dry Kiln Short Course   (4/23)




  • Forums: Dust Collection, Safety and Plant Operation

  • dust collector in basement   (6/4)

  • Dust/shavings collection for DJ-20 jointer   (5/4)

  • Humidification   (3/19)

  • Heat   (3/7)

  • Crazy Question   (2/23)

  • Correct definition for dust release   (2/17)

  • Semco Rotary Airlock Question   (2/11)

  • Needing Help With Torit Dust Collector   (2/6)

  • How much CFM will my dust collector deliver?   (1/24)

  • Remote Start for Dust Collector   (1/23)




  • Forums: Finishing Forum

  • Kremlin vs HVLP Finish Quality   (6/24)

  • Touch up   (6/22)

  • Milesi technical data sheets   (6/21)

  • Live Edge Walnut Slab   (6/20)

  • Spraying conversion varnish vertically   (6/20)

  • Airless Sprayer   (6/15)

  • Sherwood HB CV?   (6/14)

  • Placement of Exhaust Fan in Cross-draft Spray Room   (6/14)

  • Pressure feed H2O Gun   (6/12)

  • buff and polishing conversion varnish   (6/6)




  • Forums: Forestry

  • Workshop and Field Demonstration for Vacuum-Steam Treatment of Logs to Meet   (4/4)

  • New Toy - Forestry Trailer   (10/27)

  • Western Red Cedar Solvent Soluble Extractives   (10/26)

  • Cedar For Sale - Selling / Advertising Options   (9/3)

  • gas powered generator for electric sawmill   (1/11)

  • opinion about a sale   (12/11)

  • W Red Cedar Allergy   (9/15)

  • Tree/lumber damage   (8/27)

  • I've had the hardest time trying to sell these walnut logs...   (6/1)

  • best way to paint trees for a first SYP plantation thin   (3/27)




  • Forums: Furniture Making Forum

  • Cerused wire Brush   (6/13)

  • Lauderdale-Hamilton Gang Rip Saw   (6/9)

  • Nationwide Custom Furniture Delivery   (6/4)

  • How to know your market?   (6/3)

  • Access to Shop For Personal Projects Off-Hours   (5/30)

  • Table top sag calculation   (5/29)

  • Edgebanders   (5/28)

  • Tar Paper Over Machinery?   (5/5)

  • Exterior raised panel weather protection   (5/2)

  • 1986 Enco/Jet 15" Planer   (4/17)




  • Forums: Cabinet and Millwork Installation Forum

  • Dust Caps in Medical Facilities   (6/19)

  • Outlet Behind Drawers   (5/4)

  • Blown PC Nailers   (4/16)

  • Sills   (4/15)

  • How to install two pulls opposite each other   (4/14)

  • Overlay fillers   (4/3)

  • Crown molding   (3/7)

  • bookcase over hydronic baseboard heat   (2/28)

  • How to fix 'bump's from pocket screws too deep   (2/16)

  • Bumps ?   (1/24)




  • Forums: Laminating and Solid Surfacing Forum

  • SCM Basic 1 Keeps Stopping   (6/25)

  • edgebander automatic and semi automatic   (6/16)

  • chemetal argenta #221   (6/16)

  • corian tops   (2/7)

  • glue line   (2/5)

  • festool laminate trimmer   (1/9)

  • Laminated Wood Flooring Moisture Content   (11/26)

  • Fixing Laminate seam   (11/21)

  • Laminate Seams on Tube/Column   (11/2)

  • Corian Seam   (10/20)




  • Forums: Sawing and Drying Forum

  • Kiln dried lumber moisture regain to ambient EMC   (6/12)

  • CNC Carving A Trunk   (5/22)

  • WoodMizer boardreturn manual to auto conversion   (5/20)

  • Live edge slabs, is the hype real?   (5/6)

  • My stolen 3120 Husquvarna Chainsaw recovered   (5/4)

  • Calabash Wood Dowels   (4/17)

  • metal detector   (3/29)

  • Dry 3 Inch Red Oak   (3/29)

  • Very small batch to dry (two boards)   (3/29)

  • VT Solar Kiln Workshop 2019   (3/27)




  • Forums: Solid Wood Machining Forum

  • Powermatic Model 100 Planer/segmented roller   (6/21)

  • Lauderdale-Hamilton 40 HP Gang Rip Saw   (6/8)

  • Powermatic Help   (5/30)

  • threaded shank brad point bits   (5/16)

  • Grizzly 18-36 Drum SDander   (5/11)

  • Wide belt sander drum repair   (5/7)

  • Top and Bottom Planing several strips together   (5/2)

  • Splitting on a moulder   (4/30)

  • Scallop depth   (3/28)

  • 4 head 226 Mattison moulder   (3/9)




  • Forums: Value Added Wood Products

  • Free Urban Wood Seminar at IWF   (8/16)

  • Urban Wood, Anyone   (1/21)

  • Urban Wood   (6/8)

  • WOODWEB Poll: How's Business?   (3/4)

  • Shop Poll: What Size Is Your Shop?   (2/5)

  • Looking For A Wood Products Manufacturer   (8/25)

  • How Sawdust Pellet Machine Makes Quality Sawdust Pellets?   (5/21)

  • Burning sawdust in a pellet stove   (4/22)

  • Small start up needs help with rescued / reclaimed wood   (7/30)

  • Reclaimed lumber   (11/5)




  • Forums: Veneer

  • Satinwood veneer   (6/21)

  • Need advice Crotch Mahogany Conference table   (5/23)

  • How to make dry veneer plyable   (4/11)

  • Veneer adhesive   (3/25)

  • Veneer wiggleboard   (3/18)

  • Hammer veneering Birdseye maple   (3/2)

  • Veneer on softwood   (2/27)

  • Macassar Ebony Elevator Panels   (2/24)

  • Walnut Veneer Blisters   (2/13)

  • Can not figure out the wood/veneer!   (2/6)




  • Forums: WOODnetWORK

  • Edgebander   (6/11)

  • Holz Her 1243 Sliding Table Saw   (4/17)

  • Needing A. Costa Contact Information   (3/13)

  • Porter Cable 310 Trim Router   (2/25)

  • Biesse Edge bander   (2/17)

  • Ott mark 3 parts   (12/1)

  • Best/economical "Insulation " for metal building   (9/25)

  • Outsource for cheap doors   (8/15)

  • prefered beading system windows and doors   (8/11)

  • How to brace a porch   (7/27)




  • Exchanges      Return to Previous Page || Return to the page you were originally viewing



    Classified Ads

  • want to buy a millwork shop (Canada: Ontario)   (6/05)

  • Older Senco Fastener Guns for Sale (MD)   (5/19)

  • share workshop (CA)   (4/29)




  • Job Opportunities and Services

  • SUB-CONTRACTORS (CT)   (6/25)

  • Total Company Integration Analysis (Anywhere)   (6/25)

  • Finishing Dept Head (Anywhere)   (6/25)

  • Cabinet Maker/Millworker (FL)   (6/25)

  • Custom Door Manufacturer (NJ)   (6/25)

  • CNC Programmer and Operator (NJ)   (6/25)

  • Engineer Auto Cad/ Microvellum (Anywhere)   (6/25)

  • Drafting Engineer (CT)   (6/25)

  • Cabinet Maker/Machinist (CT)   (6/25)

  • Cabinet Stockbiller/CNC Programmer (CT)   (6/25)




  • Lumber Exchange

  • Reclaimed Skip Planed Oak Flooring /Wallboard (KY)   (6/25)

  • Reclaimed Oak Horse Fencing Raw or KD&DN (KY)   (6/25)

  • Walnut Dimensional Lumber #2 Com (KY)   (6/25)

  • Thoroughbred Racehorse Wallboard/Flooring (KY)   (6/25)

  • 2 Sided Hand Hewn Timbers - Hardwood (OH)   (6/25)

  • 4/4 K/D Soft Maple (PA)   (6/25)

  • 4/4 K/D Cherry (PA)   (6/25)

  • 4/4 K/D Hard Maple (PA)   (6/25)

  • Heartpine Timbers #1 Grade (IL)   (6/25)

  • White Oak Log (MD)   (6/25)




  • Machinery Exchange

  • Used Timesaver combination wide belt sander (NY)   (6/25)

  • New in 2014 one-man shop use (MA)   (6/25)

  • great saw (GA)   (6/25)

  • needs some new bits (GA)   (6/25)

  • 16" Jointer/2 knives 550V/3 phase (VT)   (6/25)

  • 30" -4HP 550V (VT)   (6/25)

  • Single end tenoner-220- 3 phase (VT)   (6/25)

  • 1 1/4 " spindle Table size 56" v 40". 220/3phase (VT)   (6/25)

  • Biesse Rover B 4.40 CNC Machining Center RTR# 8121465-01 (CO)   (6/25)

  • Good condition/ 220/3 phase (VT)   (6/25)




  • Project Gallery / Sawmill Gallery / Shop Gallery      Return to Previous Page || Return to the page you were originally viewing



    Galleries: Project

  • Woodshop Projects   (5/17)

  • Custom Panel Entry Doors - Storm Doors   (5/02)

  • Custom Outdoor Patio Loveseats   (5/02)

  • Lion's Desk   (3/26)

  • wood carving by hand Lion Head Double Doors onlays   (3/21)

  • Black Walnut River Table   (3/15)

  • Custom Walnut Library   (3/07)

  • Decorative Screen Panels   (2/04)

  • Merchandise Mart Chicago Showroom   (12/26)

  • Built in bookcases   (12/19)




  • Galleries: Sawmill

  • Fisher Family Sawmill   (02/17)

  • Out of the Woods   (02/13)

  • happy groundhog woodworks   (02/01)

  • Morgan's Custom Sawmill   (10/10)

  • UNCLE BUCK CARVINS   (07/25)

  • Olympia Mobile Wood Mill   (04/14)

  • Butler Adams Hardwoods   (12/22)

  • Da Slabba   (09/13)

  • Mill Creek Sawmill & Productions   (08/21)

  • Lumber One   (07/29)




  • Galleries: Shop

  • Hardwood   (06/06)

  • Grand Wood LLC   (04/05)

  • Kay Dee Company of Omaha   (12/08)

  • Luke David Designs   (09/09)

  • The Granite Bracket Shop   (08/16)

  • Full Circle Design Works, Inc.   (07/10)

  • Antreasian Design, Inc.   (10/13)

  • Lumber One   (08/18)

  • Parts Cutter CNC   (08/03)

  • Closet Masters of Nevada   (12/04)




  • Industry News / Auctions, Sales and Special Offers      Return to Previous Page || Return to the page you were originally viewing



    Industry News

  • Hexagon Mfg Intelligence Production Software at AWFS 2019   (6/20)

  • Latest Housing Report by the USDA, Part 2, Now Available   (6/20)

  • Latest Housing Report by the USDA, Part 1, Now Available   (6/20)

  • Mastercam 2020 Router Released to Market   (6/8)

  • New Airspray Low Pressure Fluid Hose from SAMES KREMLIN   (5/28)

  • New Airspray Low Pressure Air Hose from SAMES KREMLIN   (5/28)

  • SAMES KREMLIN New FPro Manual Airspray Spray Gun Pressure Range   (5/23)

  • SAMES KREMLIN Launches ASB Automatic Spray Gun With Base   (5/16)

  • CMA Sets Dates and Location for 2020 National Conference   (4/15)

  • New Customer Service Rep Alex Walker Joins Cabinet Vision   (4/15)




  • Auctions, Sales and Special Offers

  • Online Auction - Late Model Woodworking Machinery & Equipment   (6/18)

  • Online Auction - Woodworking Equipment & Raw Materials June 6 13   (5/21)

  • RT Machine Company Hosts Open House/First Annual Live Auction May 15 & 16   (4/23)

  • Apollo Announces Free Spray Gun Offer   (3/23)

  • Online Auction - Northwest Millworks - Feb 13-20   (2/1)

  • Online Auction - Custom Cabinet Shop   (12/6)

  • Online Auction - Woodworking & Related Equipment Major Display Manufacturer   (11/16)

  • Two Day Live & Website Auction - 12/12 and 12/13 - Heritage Home Group   (11/15)

  • Millwork Drafting Services Thanksgiving Special   (11/8)

  • Online Auction-Timber Framing Equip.-K2 Hundegger, Dust Collector & More   (10/6)