glueing laminate
7/18/18
We are glueing laminate to existing vertical laminate surface with a triangle cutout in 1/4 of it. It fits between 2 walls and the bottom has existing cabinet that sits up to 3/8" from wall so no bottom ledge to reference on. Size of piece is 58x43 so contact cement would be a tricky fit and there are 38 pieces roughly the same size. Is there a glue that i could trowel on and wet set so as to not get caught with a miss indexed section. Thanks
7/18/18 #2: glueing laminate ...
Website: http://www.cpadhesives.com
Scott,
Our CP-0114 (available on our web site) should work well for you. Unlike a contact cement it goes together wet and will allow for some adjustment. You will need to be able to get some pressure on it with a j-roller or like but otherwise should allow you to do what you're doing. Please e-mail me if you have any questions.
CP-0114
7/18/18 #3: glueing laminate ...
Jeff do u sell on the west coast and how many square ft. coverage in a gallon? Thanks
7/18/18 #4: glueing laminate ...
We don’t have a distributor on the West coast but we can ship to you, no problem. A gallon will cover about 300 square feet of glue line. It only goes on one side so you get considerably more coverage than contact cement.