Architectural Woodworking

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Post a Response
The staff at WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at any WOODWEB Forum. Participants should undertake the use of machinery, materials and methods discussed after considerate evaluation, and at their own risk.
Your Name:
Your Website:
Email Address:
Subject: Re: Setting up a solid door making factory

Message:

(read message guidelines).
Note: Do not use the below fields to advertise your business - only for links related to the discussion.
Thread Related Link URL:
Thread Related Link Title:
  To "point" to an image (picture) from another website, provide the URL (Web Address) of the file ( include ONE reference to http:// )
Thread Related Image URL:

Date of your Birth:

Upload a Thread Related File:
File Types: Image (gif-jpg-png-bmp), PDF, Sketchup, Video (mov avi wmv mpeg mpg mp4 ogg). (Image Upload Tips)

I have read the Site User Agreement and agree with the Terms

  <= Check to receive e-mail notification of responses

Message Thread:

Setting up a solid door making factory

7/8/15       
Moose Member

Dear All
I am interested in setting up a solid door manufacturing facility. I want to produce 100 doors per month. This should include sealing and lacquering as well.
I would like some help on what machinery to use, and how much square footage I would require to set up something like this.
Tools Required
Machines Required
Finishing Machinery Required
No. Carpenters
No. of helpers
Factory layout

7/8/15       #2: Setting up a solid door making fact ...
snugthejoiner

Sure, we can put together a Powerpoint for you with everything you need to know to equip and operate a door factory. We'll include a list of vendors and provide training manuals for all of the stations. We'll even send some customers your way. Me and some of the others here can come out on a Sunday and help you set it all up if you'd like. After all, what's the point of spending twenty or thirty years learning a trade and how to run a business if you can't turn around and do it all for someone else who doesn't have the time or patience?

Is there anything else we can do for you? Sandwich, coffee? Is your pillow comfy?

7/8/15       #3: Setting up a solid door making fact ...
moose

hey snugthejoiner
thanks for the response ! lol
I'm actually situation across the world in Pakistan ! I'm 29 years old !
I really wish you could do that.come down across the world and help me set it up. I have some machines which I bought a couple of. years ago.tomorrow I will take pictures and make a list of what I have and don't have
as for. the coffee and pillows I think I got that covered

7/8/15       #4: Setting up a solid door making fact ...
the google

moose - try the knowledge based (archives section) of this site, and/or use the search function. this topic has been covered in the past and i'm sure you would find those previous post enlightening.

good luck.

7/8/15       #5: Setting up a solid door making fact ...
Larry

Small shop would be a better term for a capacity of 100 doors per month. It could be done with a set of basic shop tools. 12" table saw, jointer, planer, mortising machine or Festool large domino machine, heavy shaper or two, clamping fixture, spray finishing equipment. 2 or 3 people. All of those tools except the Festool can be found, in most places, used. Up grading to better equipment could double your output with the same 3 people. Molder, SL rip saw, door clamp.

Good luck

7/9/15       #6: Setting up a solid door making fact ...
Andrew J. Coholic  Member

Website: http://www.joecoholiccustomfurniture.com

We've been making our own doors (in our smallish custom shop - 3 to 4 person, 6000 sq ft) since the early 70's.

Always have used a good 5 or 7.5HP shaper to machine the frames (with a tenoning attachment or Weaver set up) and raised panels.

If you are processing your own rough lumber, then all you really need for your quantity of doors is a decent chop saw (we use a 5 HP, 14" radial arm saw set up for just cross cutting), a jointer, planer and table saw.

Wide belt sander is pretty much mandatory IMO to get a decent flat door in good time.

With a decent selection of cutters for the cope& stick (frame) and raised panels (I dont buy anything now except carbide insert tooling) you can do several door styles all using the same heads.

Realistically, one man in my shop can easily produce 50 doors in a regular 40 hr week, from rough lumber to a finished, sanded door ready for the finishing room. Easily 100/month.

Going up in volume, I think you would have to investigate specialized machinery - for frame and panel processing, as well as more automated machinery to prepare your stock (moulder, coping or mitre machine, profile sanders, etc) but you will be looking at a much larger outlay of $$.

For door frame stock, I always rough cut my material, let it sit for a day, then joint and plane before cutting to length and shaping.

Door panels are laminated, sized and thicknessed, backs pre sanded, shaped, sanded and clearance taken before assembly. The the assembled door is edge sanded and run though the widebelt before hand sanding.

Pretty straight forward process.

For mitred doors, you can set yourself up for assembly with loose tenons. Slot mortiser and machine your own tenon stock.

7/10/15       #7: Setting up a solid door making fact ...
David R Sochar Member

"Doors" is not a meaningful word. "Solid doors" is also weak on meaning. What, exactly, are you proposing to make?

Frame and panel interior passage doors, cabinet doors, solid core doors, frame and panel with composite stiles, exterior doors, residential, commercial, and so on. Each variance will determine/influence machinery.

I think Andrew C's response is for cabinet doors. If one guy can make 50 passage doors in a 40 hr week, "I'll have what he is having" to paraphrase.

7/10/15       #8: Setting up a solid door making fact ...
Moose Member

I've lived in middlefield OH for 1.5 years, and 6 years in Toronto, Canada before that - its okay I've seen my fair share of racism.. I just wish it wasn't so - I've studied at the University of Toronto for a BA and then an MSc in Politics - so I usually know what I'm talking about in the realm of politics - this is mindless banter - so please don't apologise for anyone, can you help me further with my project though sir ?

7/10/15       #9: Setting up a solid door making fact ...
Robert Member

Greetings Moose...as a long long time poster here on Wood web I would like to apologize for some of the silly remarks.

I'm a wood finisher so cant help you much in the way of what you will need for producing your doors but there are many wise and upstanding posters who are more than willing to help you.

Please ignore the replies that don't pertain to your initial question.
Best of success to you.

7/10/15       #10: Setting up a solid door making fact ...
David R Sochar Member

Moose --
I would like to have a used straight line saw or tablesaw for the minimum, a good joiner, a good planer, a solid heavy duty shaper for sticking, and a solid heavy duty shaper for tenoning. You could do it all with one, but two is very nice. A wide belt sander for sanding assembled doors, and a cut-off saw - radial arm saw or a panel saw. A mortiser of either vertical hollow chisel type - heavy duty, or a swing chisel type.

If this is more than a one time deal, then you may want to step up to a dedicated single end tenoner and a 4 head planer/S4S machine to make parts so much faster.

Some basics are 8 m/hrs per door (this is wildly variable depending upon the complexity of the doors) to assemble the doors only, sand and clean up. Also 1,000 s/f per person is a good rule of thumb.

This site does allow posting of pictures. I bet you can figure it out faster than I can explain it to you. Instructions are below the text box you type into.

And don't forget - "Illegitimi non carborundum"

7/10/15       #11: Setting up a solid door making fact ...
Will Williamson  Member

Website: http://www.willmade.com

I,ve made My last few doors on my Thermwood cnc. I did not do it the way the video shows, but you get the idea
http://www.youtube.com/v/EW4jTI6e-Hk?autoplay=1&rel=0
In addition to this,You still need to, joint plane, rip, cross cut, dedicated S4S

7/10/15       #12: Setting up a solid door making fact ...
Andrew J. Coholic  Member

Website: http://www.joecoholiccustomfurniture.com

Yes my post was pertaining to 5 pc raised or flat panel cabinet doors.

However we also do interior and exterior doors but not as frequently. The procedures are identical in our case just larger PCs. I am confident to say we would be in the range of 10 frame and panel man doors in the same 40 hr period, on the same basic (but industrial type) woodworking machinery.

If you can afford straight line rip, moulded, clamp carrier and door clamps etc go for it! It is always going to be very different in terms of shop, if your are setting up a true production shop vs a general woodworking facility.

7/10/15       #13: Setting up a solid door making fact ...
Larry

Everyone seems intent on frame & panel while his post is about "solid." By which I think he means looking like a slab door. A tricky wicket at this size!

 

Buy & Sell Exchanges | Forums | Galleries | Site Map

FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)