Woodworking Business

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Post a Response
The staff at WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at any WOODWEB Forum. Participants should undertake the use of machinery, materials and methods discussed after considerate evaluation, and at their own risk.
Your Name:
Your Website:
Email Address:
Subject: Re: Charge for drawings

Message:

(read message guidelines).
Note: Do not use the below fields to advertise your business - only for links related to the discussion.
Thread Related Link URL:
Thread Related Link Title:
  To "point" to an image (picture) from another website, provide the URL (Web Address) of the file ( include ONE reference to http:// )
Thread Related Image URL:

Date of your Birth:

Upload a Thread Related File:
File Types: Image (gif-jpg-png-bmp), PDF, Sketchup, Video (mov avi wmv mpeg mpg mp4 ogg). (Image Upload Tips)

I have read the Site User Agreement and agree with the Terms

  <= Check to receive e-mail notification of responses

Message Thread:

Charge for drawings

10/5/18       
chipbored

Hi all

Does anyone charge for shop drawings?
I'm getting more and more people coming in with a basic drafted plan.
- no elevations
- no details
- no fixture and fitting schedule

It's not like the old days where they pick a color, drawers here, doors there, oven there etc. and leave the rest to you. Everyone expects detailed drawings.

The job drags out and you end up on the phone begging the customer to tell you what color they want and which handle so you can start the job so your guys aren't standing around twiddling their thumbs.

So I'm thinking of putting a cost item in for design and detailing.

If someone comes in with no plans or architectural basic drafts I'll put a note in the contract that 4 hours of design time are covered (or whatever is ample time to get the job to the shop floor) and then anything above that is an hourly cost.

I see this making people more conscious of this factor and more decisive. At worst if they fluff around and what to sit down for hours designing I'll get paid for it.

to be honest I would prefer them to just come in with "almost there" drawings from an interior designer or architect. More accurate quote and quicker to get the job to the shop floor. I think insisting on this would turn a lot of customers off though.

10/6/18       #3: Charge for drawings ...
james e mcgrew Member

Website: mcgrewwoodwork.com

We called it ( I do not do residential anymore) "Skin in the Game" Upfront drawing cost, Cost is applied to contract.

10/6/18       #4: Charge for drawings ...
Pat Gilbert

That market has moved to 2020 where you can draw a kitchen in a half hour.

IOW it is now what people expect.

Not that you can get manufacturing info from 2020...

10/6/18       #5: Charge for drawings ...
cabinetmaker

give an estimate off the crappy drawings known as a "budget number" once under contract, then spend your time on drawings

seriously, tire kickers and leaches will take your time and flush your life into the abyss

10/6/18       #6: Charge for drawings ...
D Brown

Typically I go to the jobsite if they have no plan, within an hour or 2 I can come up with a basic floor plan with enough details to formulate a price. When the potential client asks for a drawing if you have a program spit out a sketch but without measurements , or I offer them one with numbers for $200 that will be taken off the job .

10/6/18       #7: Charge for drawings ...
Jim

I bid everything through CV. I have a meeting, design, nesting and material order percentage. I only get this if the job goes through. We our networked with builders and designers so the one off customer I will send them a price only. If they express interest then a drawing charge of 200 dollars apply.

10/6/18       #8: Charge for drawings ...
Family Man

I don't think I have spent more than an hour, with 90% being 20 minutes or less, to bid a job in years. You give me the info, I give you a bid. Otherwise someone else can have you. If a client can't tell you in one email with floor plans, a description and some pictures what they want imagine how much fun it will be to pull that information from them.

I'll visit a jobsite before giving a bid if you are a contractor that gives me half a dozen or more jobs a year and only uses my shop exclusively...otherwise you give me the information via email. Any changes and variations from original discussion email indicate a change in price. I can't image spending hours visiting a jobsite, selecting materials and design, drawing plans for a job that has not been given to me. I don't understand running a business that way. I work once I'm hired & paid and not before.

In my opinion, bidding should be very simple and straightforward. If you can't print a single sheet of paper that states your rates for X, Y & Z and hand it to them with the bid you gave them for their basic drawings so that they know what any changes are going to cost them you are wasting time and money.

How many jobs a month are you running through your shop? How many hours do you spend bidding, doing drawings, etc for these jobs you are bidding? What is your closure rate? At the end of the day my time is way to valuable and in short supply to run around and try to extract information from someone before they are paying me.

10/7/18       #9: Charge for drawings ...
MarkB Member

These posts are always interesting. Never fails that I find myself thinking I'd need to be mainlining if I ever thought I was in familymans business environment.

There isnt a job we have done in 30 years where I would build to a set of supplied drawings unless I was providing factory cabs with fillers and plenty of molding and corner bead. On a complex (hate the phrase but...) high end job the headaches alleviated by a site visit for a good customer (contractor or otherwise) are well worth it if the mileage is within reason.

There is not a price list I could think of that I could hand a customer that would allow them to quantify what my line item expense for their project would be and furthermore there is no lending institution backing their mortgage that is going to release a check to me based on a number they came up with from a list of rates I provided them lol.

We dont draw for free but we dont charge as a line item for drawings either. I will give a ball park estimate based on initial conversations and perhaps some very quick sketches. Once the project is on deposit and a lock we will dig in as deeply as required. The depth you will have to go is pretty much obvious in the first few meetings with contractors, designers, end-users. And then there is coverage in the contract for changes.

I can imagine if you are competing with a bunch of factory cab re-sellers whether it be the home centers or the myriad of other kitchen centers that have zero facilities other than a showroom, your going to be stuck because any homeowner can walk into a big box and waste several hours of their time on drawings and revisions and never intend to buy the first box. We cant operate in that world but our market is squarely in that territory.

Every one of these threads has the shop that supposedly storms through their market kicking the doors off the hinges and taking bags money left and right, naming their own game... Id love to be in that world but in 30 years Ive yet to come in contact with a single shop from coast to coast (US) that actually operates that way. It sure would be nice though. It usually seems to wind up a balance between every option mentioned by the time the thread dies.

10/7/18       #10: Charge for drawings ...
Family Man

Who says we don't do a site visit? Or that our jobs are not complex?

I just stated I don't do them before we have the job. If you want to pay for my design knowledge you have to lock me up as your cabinet builder.

But we don't advertise. Every single job we get is word of mouth and we still turn a great many of those away. The vast majority of our clients are ours before I have ever spoke to them. If you are out slugging it out to close an industry average of 30% of potential clients then perhaps you have to approach things differently. I've never wanted to be in that situation.

10/13/18       #11: Charge for drawings ...
chipbored

Thanks for the great response. Some interest and polarizing thoughts.

Some thoughts

People often mention the "plan without dimensions" thing as being a clever way to give potential customers a plan without them being able to use it to shop around.
1. You have already wasted time working on a job you have a 30% chance of winning(this is almost my exact close rate)
2. It's a scaled drawing! any woodworker can get a few key measurements and work out more than enough from the drawing to give a price of their own.
3. By the time you have driven to site, talked, back to work, made a drawing, quoted and sent it all to customer. that's half a day. Half a days work for what's probably a 50% chance at getting the job.

I agree with family man. In a magical land where we all did the same thing and didn't go to site or start any work on the job before we had it. It would be a better world for all of us.

Also same point. I'm not expecting a drawing that we can work off. Just something with all of the details so I don't have to constantly go back to customer for minor details that stop the job from starting or progressing. colors and materials chosen. Design layed out. Then I can site measure. Make some shop drawings that pick up any discrepancies and off we go.

10/13/18       #12: Charge for drawings ...
Family Man

So chipboard, what takes your closure rate where you want it? What takes you from clients selecting you to you selecting clients? You have three variables- cost, quality and service. What has to change so that you don't have to waste that time? Because you have the job if you want it and they provide all the information needed so you don't do the run around. And is the cost in capital and effort to get to that point worth what you are gaining? That last point is where most get sidetracked- the cost is too great upfront, they'd rather pay the monthly installments payment of misery at 30% and battle for customers.

10/18/18       #13: Charge for drawings ...
chipbored

Hi family man. They are some really good points you make. I have reflected on them and it seems as follows.

The predominant factor that dictates my closure rate is pricing. I feel like everything else I offer would satisfy a customer.

I'm not sure what the answer is to what takes me BEING selected to SELECTING.

It seems like either sacrificing service would be the element that has to give to get my time back or going in the opposite direction of SERVICE overdrive by creating a system that allows customers to select without me. I do believe the cost of that is too great and I don't have the resources to accommodate that. Current social climate feels like people have an expectation you will be there to hold their hand beyond the scope of your offering.

I don't see the potential reward associated with the risk of going down that path as worth-it.

10/18/18       #14: Charge for drawings ...
Family Man

Chipboard, it's hard to know if that is an accurate assessment without knowing your quality, service and margins. But in the half dozen shops I've tried collaborating with over the years I could easily knock 20% off their operating costs through cleaning up their shop, cleaning up their procedures, organizing their schedule and paperwork. It is almost shocking how much waste is in the average cabinet shop- wastes of time, square footage, manpower and even material. If you sell a 20,000 dollar job how much do you and the shop make off of it? And how long does it take you to produce?

 

Buy & Sell Exchanges | Forums | Galleries | Site Map

FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)