In terms of pitfalls - I have customers who build ultra-fancy speaker assemblies who have to pay really close attention to their construction methods from an acoustic point-of-view. Subtle issues can arise primarily from loose components or hardware inside the speaker box. If you're already into building speaker boxes, you probably didn't need me to tell you this, but I ran a custom woodshop for years and honestly, this may not have occurred to me until it was too late if I was building one for the first time. I'm not an audio engineer, but your design looks solid in my eyes, especially if it's thoroughly and solidly glued together. Some of those same customers I mentioned use our Lamello Tenso connectors as a miter clamp for gluing the boxes together since they may be used in any angle and pull with 35 lbs of force. For that matter, you could actually use Tenso connectors for all of the assemblies inside the box and dispense with the dado process. And just yesterday, we launched the P-10 version of the Tenso for thinner materials too. The slots for the P-System may be made with a hand-held machine (the Zeta P2), on a CNC router, or through a hybrid process. You could look around here elsewhere on Woodweb and see what other customers have said about their experiences their Zeta. Let me know if you have any questions about it and good luck with your project whichever direction you go in. All of my customers who build cabinet boxes say it's nice little (and lucrative) sideline to their business, so it's a good choice to broaden your portfolio.
When I was making speakers for Acoustic Research the internal baffles were set into dadoes like yours. But they used 3/4" thick material and the dadoes were .705 I think. On the parts that would be put into the dadoes there was a deep slot cut into the center of the edge that made the part be able to flex and squeeze into the slot. It was always a tight fit that was acoustically sound.
I've never done miter folding before, but I read up a little on it this morning. Do you suggest cutting all the way through with the V bit, adding tape, then folding? Or just cutting almost all the way through?
I'm selling complete speakers, so no issues with getting paid or low margins associated with kits.
Thanks for the suggestion on the lamellos, I will look into it. Also, yes, I am aware of the issues with rattles. I was previously making a molded plastic speaker with a bunch of electronics inside and there were all sorts of problems with connectors rattling and air chuffing through holes.
I think it's pretty neat that you made cabinets for AR. AR and NHT used to be headquartered near me in Benicia, CA, after they both got acquired by Recoton around 1990. I used to dig in their dumpster for discarded speaker parts!
When you made AR cabinets how did you cut the miters and clamp them? Did you rely on the baffles to keep the miters aligned? or something else to ensure registration?
I'm pretty sure I don't want to use a lock miter because of the aesthetic of the joint.
We had a jig that kept things in place and the glue we used was super thick. Just used bungy cords to hold things together until the glue dried. Weird tapered angles with a fully tapered cap.
I redesigned the whole thing and sent them a sample because the miters were a pain to work with. Then they came back with a drawing of my redesign with another guys name taking credit for it. But it used dadoes instead of miters. This was a tall skinny rectangularish speaker with some kind of fuzzy paint material on it. Kinda neat.
We miter fold on a flat table CNC, we tape before we fold, a fold across the grain needs to be close to through so it doesn't splinter, it varies by veneer.
You can pick a used dedicated feed through machine up for about 7k at auction. Or you could have a local company make a custom metal frame and use some 3HP routers, one fore a rough cut and one for a finish cut.
Otherwise you could set up a shaper with a 0 cut and miter the ends and then tape and glue.
Do you have any concerns about the STC of the different material types?
We did some speaker boxes almost 40 years ago, when I asked the woman who wrote the checks why they always bounced, she didn't understand it, she called the bank every day to check the balance before she wrote any more checks.
I would call their bank, go an get cash or cashiers check and then deposit it.
Somebody that got tired of not getting paid advertised their house for $150 a month in the local paper, no deposit, with just the address and come any time. It was a 3000 sq foot home, 5 bedroom with a pool, near a college. They had people ringing their door bell for a month asking to rent the house.
FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards(return to top)
WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
A valid email return address must be included with each message.
Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
Subject lines may be edited for length and clarity.
"Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.
You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.
WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.
Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).
Libel: Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.
Improper Decorum: Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).
Advertising: The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).
Repeated Forum Abuse:
Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.
There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).
The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)
Forum Posting Form Guidelines
The name you enter in this field will be the name that appears with your post or response (return to form).
Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
Thread Related Link and Image Guidelines
Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
Thread Related File Uploads
Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .FLV .MP4 (Image Upload Tips) If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
The editors, writers, and staff at WOODWEB try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at WOODWEB after considerate evaluation,
and at their own risk.