|Home » Forums » Cabinetmaking » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
table saw problems11/1
I have a 3hp. delta cabinet saw, I have two problems and I need help.
1- I think the drive belts are loose on your saw from the motor the the arbor. Should be augmentation on how to adjust and tighten the belts
2- Holding the raise of the blade is usually a center knob in the front of the crank whell. If the allen set screw is loose on the side of the crank wheel the center knob will not tighten.
There are a lot of good videos on youtube.
I see your problem right off. You bought a new table saw, expecting perfection right out of the box.