|Home » Forums » Cabinetmaking » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Under drawer LED's conundrum11/13
Working on a closet with pull out shoe trays. In order to maximize the height between the trays the owner wants to mount the LED strip lighting directly to the underside of the drawers.
The problem arises when the drawer is pulled out. I can't have a lot of wires dangling. My first attempt was to energize the drawer slides (pos one side, neg. the other), when the drawer box is installed the circuit is completed and the LEDs are energized. Even at 12 volts the electrician wasn't keen on the idea.
So, I'm wondering if anyone has come across a similar problem and if there is a solution out there. I currently researching retractable LV wire wheels that I can mount behind a false panel in the back.
Oooh, I like the energized drawer slide idea.
Have you thought about wireless LED's, The battery life is the down side but they work well and fit either 32mm system holes or into a 35mm hole or use two sided tape that's included and they are motion and light sensitive.