Edgebander repair technician
11/10/15
Website: http://habitardesign.com
We're looking for a technician to maintain the machinery in our woodshop located in Chicago in particular our edgebander.
11/11/15 #4: Edgebander repair technician ...
Website: closetexperts.com
Try this guy:
Phil Arends
Machine Repair
224-875-4400
Worked on my equipment over 10 years.
Based in Des Plaines.
Good at knowing when to buy parts from dealer or other sources.
Kept my Brandt bander running like a top!!
11/11/15 #5: Edgebander repair technician ...
Website: http://www.biesseamerica.com
There are a number of very good independent technicians in the Chicago market. Phil is one of them and very good on banders. At times he can be in high demand because of this. If he is not available in a time that meets your needs send me a message and I will give you a few other names to try.
11/13/15 #6: Edgebander repair technician ...
You want to get Gordon Pettit of Pettit Technical Service. Holz-Her is his specialty.
He travels all over the country. If you get him while he is near it is cheaper. Well worth the expense if you have a little time. If you do bring him in let him go through the machine end to end.
814-492-3011
Good luck.
8/15/16 #7: Edgebander repair technician ...
I have a Brandt Edgebander the cutoff motors are acting like they get no air to. The bottom cutoff pushes up the top cutoff . Any ideas what is happening?
View higher quality, full size image (3264 X 2448)
3/21/19 #9: Edgebander repair technician ...
Website: http://www.continentalmachineryservice.com
Contact Detlef with Continental Machinery Servicing, Inc. Holzher Certified and travels nationwide. Knows his stuff!
303-517-4146
12/16/19 #11: Edgebander repair technician ...
Are there any independent edgebander techs on east coast that work on Brandt
6/1/20 #13: Edgebander repair technician ...
Does anyone know of an Edgebander technician in Michigan? I have an SCM basic 2. I am in Grand Rapids, Michigan.
12/4/21 #16: NotifyOnlyPost ...
Website: http://tmcabinetry.com
Can someone help me find a tech for Holz-her edgebending machine in West Palm Bch FL
We moved our shop from 3 phase to 1 phase and my holz-her is not working since we moved it