|Home » Forums » Cabinetmaking » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Shaper / Jointer Purchase7/16
I am wondering opinions on the following
Cantek SS512CB vs. SCM equivalent
Also look at Exrema, I have been very happy with my shaper from them an XT-260, 10 HP, tilting sliding table. Replaced the bearing after 10 years and one of the mechanical DRO went out. But parts wear out when you use it every signal day for 10 years! Been very happy indeed. I can't afford a Martin either, I looked at most large shapers and was most pleased with this one's features.
If your budget allows for the European, definitely go that way. SCM owns Casadei. The other 2 are Taiwanese machines
I second what Bob said. SCM all the way.