Safety Speed Cut Thermwood Corporation ECabinet Systems

Cabinetmaking

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Stone countertop cutting

10/19/20       
Scott

I had a question about cutting stone countertops, I was wondering if anyone could recommend a reasonably priced track saw for cutting stone countertops. I will add that this may be the wrong place to post this, I was looking for a similar forum online with the stone countertop folks, but didn’t find much?
I am not trying to get into the stone business, but on some renovations or smaller jobs we may have to shorten a top, or supply a small top and it would be nice to have an accurate saw. I really don’t even want to get involved with this work, but some schedules have been majorly jeopardized because we are waiting for someone else to do the work, or on some smaller vanity’s or rectangular short runs of cabinets, no one even wants to be bothered with it.
Thanks for any input.

10/19/20       #2: Stone countertop cutting ...
rich c.

I can't see that "reasonably priced" going along with your request. It's going to need water to be able to do that to all stone tops. I wonder why you are even involved with the top. That was never even in my estimate and the only contact I had with the top shop was to tell them when I was done.

10/19/20       #3: Stone countertop cutting ...
rich c.

Is $2,800 reasonable?

Diamond Tool Store track rail saw

10/19/20       #4: Stone countertop cutting ...
Alan F.

Rich,
We sell a lot of stone through a sub, in commercial the GC's prefer one company to handle it so it all fits and is coordinated.

Its an extra profit center, me just mark it up and charge for coordination and payment.
A-

10/19/20       #5: Stone countertop cutting ...
Alan F.

Scott,
The OSHA silica rules that came out a few years ago don't allow a lot of stone cutting on job sites. It may not be a problem in residential but our stone vendors don't even scribe in the field anymore.
A-

Silica, Crystalline, Construction

10/20/20       #6: Stone countertop cutting ...
Mark

The Blue Ripper Jr looks more like what you'd need for occasional use.

https://www.diamondtoolstore.com/achilli-track-rail-saw-tsa-3hp/

I think I've seen them- or something just like it- for rent, although owning is usually a better bet if you need it more than twice

10/20/20       #7: Stone countertop cutting ...
Scott

Thanks for the info everyone, i never even considered renting, I will look into that.
I also found a Rubi TC125 that seems like what I am looking for , I will compare all the models mentioned.
Rich,
I agree with you that I don’t want to do it and it should be a different trades work, but sometimes it saves us a bunch of time if we don’t have to wait 2 weeks or more for someone else to show up, or even worse when no one wants to do it.
Alan,
I agree with what you said about cutting on site, I think the dust is a serious health issue, just like certain kinds of finishes can only be sprayed in a spray booth. I would only cut or polish wet and off site as the water is key to safety and also messy.

10/20/20       #8: Stone countertop cutting ...
pat s gilbert

I have seen it done with a skill saw and a stone blade and sponge and some water.

The straight edge won't do much good though as there is a lot of pressure on the saw. I think they just put down white masking tape (as it stays stuck in water) and put a line on it to follow.

What would it hurt to try it this way.

Not a big deal really

10/20/20       #9: Stone countertop cutting ...
pat s gilbert

On second memory I think it was a diamond blade and an angle grinder

10/20/20       #10: Stone countertop cutting ...
Rocket

I bought an unbranded 5" handheld wet saw with a garden hose adapter and flow valve. Use a waterproof marker as the guide line, cut slowly, no dust, takes up no room in it's plastic storage case and has been very useful for the half a dozen times I've needed it over the last 10 years. Probably didn't cost more than $100.

10/20/20       #11: Stone countertop cutting ...
Ryan

I have cut a quartz top with a skill saw with a Dimond blade. I wouldn't want to do a lot of them but it was in a quick remodel situation like you are talking about. I clamped a straight edge to the top for the base to ride against. It really wasn't hard to do but you have to go slow.

10/28/20       #12: Stone countertop cutting ...
cabinetmaker

I own a makita hypoid with a Bosch diamond blade. I use 1/2” plywood jig to cut to my line a lot like a festool track saw. Have water line on it

I also own a makita grinder with 4” diamond blade.

A metabo polisher. That’s the field stuff.

We got started in the shop with Accuglide Rail saw. Then up to a small bridge saw.

Now we are digital with a Sasso k600 and cut about 10 jobs a week. Stone install truck with crane.

I started because I got tired of being f’d around after I gave them 50% up front and they would never show up

11/3/20       #13: Stone countertop cutting ...
Scott

Thanks for all the suggestions, I will definitely look at them.
Cabinetmaker,
I have no intention to get as involved as you are, but my frustration is probably similar when small jobs delay everything.

12/6/20       #14: Stone countertop cutting ...
Patrick Drake

Scott,
This is not difficult.
I had a project this past summer, an outdoor kitchen hardscape project.
The homeowner wanted to save a few dollars by using 3' x 4' slabs of travertine 2'' thick.
I just used my old beat up Makita worm drive with a diamond blade, garden hose, and a clamp and guide. Not rocket science.
PFD

12/6/20       #15: Stone countertop cutting ...
Patrick Drake

Photo of the job.


View higher quality, full size image (1600 X 1200)


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Limtech Industries, Inc. Lamello
    Today's Sponsors

    Become a Sponsor today!