Computer Aided Design

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Looking into using Mozaik, but...

2/12/18       
Dale Seaton  Member

Website: http://www.seatonfrank.com

We are a small two man shop looking into upgrading to a CNC at some point. I was researching software, and decided to go with Mozaik, because we have been using Sketchup pro to do our drawings. Does anyone know what will happen with Mozaik, now that the free version of Sketchup 2018 is browser based?

2/12/18       #2: Looking into using Mozaik, but... ...
Robb Parker  Member

Website: http://www.HeritageWoodwright.com

The only thing that Mozaik uses Sketch up for really is rendering. Mozaik is a very powerful design program that takes design, creates g-code and sends it to the CNC. They write post for most all CNC's. We are very happy with their business model and capabilities.

2/12/18       #3: Looking into using Mozaik, but... ...
Chevy

Website: http://keysoftwareservice.com

before you buy ask these questions,

will i have enough work to pay for this cnc
do i have enough space for this cnc
do i have enough air for this cnc
do i have an air drier for the cnc
do i have ample dust collection
does my 2 man team have time for a cnc
answering phones,,dealing with that lady holding 5k for a staple nail hole on the crown,,,cutting,,edgebanding, assembling,,finishing,, delivering and installing,,,

after i buy my new router i will need software,,(cad and cam)
autocad -5k(maybe you dont need)
alphacam/mastercam/mosaik/enroute/6k
and post processor needed for software

my advise is to find the a post processor that is 100% to your machine

take a look at alpha cam-primarily because
you can will have the least headache with post.

i push it when installing ,homag,biesse or scm machines,,,holtzher machines comes with hops,,,

2/12/18       #4: Looking into using Mozaik, but... ...
MarkB Member

If your a sketchup user (I assume the pro version) you should look at Cabinetsense. It is a subscription based plugin that you can start and stop monthly if needed. Its 75 a month for the CNC version. So if your shop were to move into a job that is all hardwoods and molding you could opt out of the subscription for those months.

If you are not using the PRO version of SU I would ask why? The cost of SU pro is trivial compared to other paid programs and we use it on a daily (honestly a minute by minute) basis for providing drawings, renderings, shop drawings, presentations, and so on.

Mozaik is fine if your focusing stricktly on cabs. Our shop (with a CNC) does a multitude of varied work. We are doing 3D texture panels at one point, cabs on a semi regular basis, architectural millwork at another, molding packages the next day. SUPro, VCarve Pro, and Cabinetsense are all we need.

If your looking to CNC software is critical but evaluating what your week to week needs are really effects software choice.

2/12/18       #5: Looking into using Mozaik, but... ...
MarkB Member

Re-reading Chevy's post Im confused. A post processor? At the assumed level of the OP a machine will come with a post and any software you will use (that is worth its salt) better be able to output to that post? GCode with arcs will do anything a cabinet shop needs unless the machine runs some proprietary post? No?

-Having the work for the machine is obvious.

-Having good, clean, dry, air, is imperitive.

-DC is trivial unless your talking a monster 150K machine in which case someone wouldnt be asking these questions.

-A lady holding a check over a "staple nail hole in crown" has a viable grudge for the shop that shot crown with a staple.

Im a proponent of SU in that it allows for versatility as opposed to being strictly a cabinet based software package.

We can design completely unique 3D textures and elements in SU and export them in a mesh for 3D work. We are able to create and export STL files to the CNC. All within a single piece of software that we are able to become fast and dynamic using. We are not limited to operating in a single software environment. If a customer wants some lineart drawing converted to 3D and carved into their raised panel door we can draw it, render it, and machine it, it a flash using only two applications.

Not saying its the only way. But the OP mentioned SU. Its been a major plus for our business.

2/12/18       #6: Looking into using Mozaik, but... ...
Chevy

Website: http://keysoftwareservice.com

there are cnc routers for under 150k?
after
cnc purcahse
rigging
installation
electrical
air compressor
air drier
dust collector-
software,

2/12/18       #7: Looking into using Mozaik, but... ...
Chevy

Website: http://keysoftwareservice.com

just my opinion,

2/12/18       #8: Looking into using Mozaik, but... ...
Chevy

Website: http://keysoftwareservice.com

sorry to divert from the original post,,

Mozaik is very nice stuff the very affordable and the cnc addon comes with a post processor ,,,

its direct competitor of Mozaik is Sai Enroute,,,also subscription based,,the pro version comes with a post processor for all cnc routers on the market today included with the price,,also videos and triaining material are free,,

2/12/18       #9: Looking into using Mozaik, but... ...
Jon Member

When you purchase a subscription to Mozaik they provide a link to sketchup 8, which is the free version.

2/12/18       #10: Looking into using Mozaik, but... ...
B

We use mozaik on a daily basis and almost never use sketchup. There is a built 3d viewer now, along with added cad design tools in the multiprint function.

I can only remember one time in the last 50 kitchens that I went into sketchup, and it wasn't even necessary.

2/14/18       #11: Looking into using Mozaik, but... ...
Scott

Just wondering if anyone is using Mosaic with a SCM machine? I was unaware of Cabinet sense, does it work on any CNC?
Has anyone used both of them? How do they compare to each other?

2/15/18       #12: Looking into using Mozaik, but... ...
B

Scm is listed on the post processor page, but you should give them your exact machine, controller and setup to make sure.

CNC Routers Linked to Mozaik Software

2/26/18       #13: Looking into using Mozaik, but... ...
JP Member

Mozaik is pretty nice, There are tons of training vids and you can send jobs to the help desk if you're stuck, for free.
There is a forum as well. The training vids and the forum are software users only.

You can also purchase training time blocks.
When you first get it you have to buy 3 months and a training session is included in that. After that it's is $125 a month for the cnc module. That's from quoting to managing offcuts. Basically everything you need.
Updates are frequent and included in the price.

You don't need sketchup at all. If you want to look at something in sketchup and take it apart and check everything that's fine.

You do all of your actual building in the Mozaik though. Get design for the trial period and check it out.

Call or email them about your specific post needs as well. They probably have it covered, but it's free (and smart) to ask.

5/29/18       #14: Looking into using Mozaik, but... ...
Douglas Conti Member

I purchased a cnc router about 9 months ago and went with Moziak. I am very satisfied with it. Be fore that I used Cabnetware which I was very happy with. I ran cabnetware through a beam saw and point to point. It worked fine it just to a little bit of time to "tweak" it just right, but that is all software. Who ever owned cabnetware pulled the plug on it and there is no support, no nothing and I was not comfortable with investing this much money and time without some sort of support on the software end. The company I bought from has posts for most popular software. I purchased moziak because I figured that if I did not like it I was not on the hook for more than a few hundred dollars so I gave it a try and have never looked back. I also got vcarve pro to make parts on the cnc that are not cabinet parts. I can do anything I want with these two programs, both work very well. My tech who set up the router had post for both these programs and he installed them while he was here and to this day I have not had a problem. Now a days integrating software is not nearly the problems it was 18 years ago, but the advice I give anyone getting into a cnc is to do your homework, figure out the costs, your need to buy software,most likely upgrade your computer system, getting a rigger to move the machine, you need clean dry air, (which you should have anyway), running the electrical to the machine, dust collection. Then be patient cause it is going to take you a few years to get really good at running your machine. I never forget I cut a whole bunch for a guy out of 1/2" mdf 7 or 8 bundles, and they were kind of odd shaped and I did not even come close to estimating the cost of cleaning up twice a day, and throwing away the scrap ( I had to get a 20 yd container) .


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)