|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Morbidelli Author 503 Dado Motor Configuration8/4
Really need help reconfiguring our Morbidelli Author 503 Dado Motor.
We had the infamous battery issue and lost everything. So starting from scratch and we are almost back to where we were at except we can't get the dado motor to turn and cut on the Y plane. It is setup as tool #80 & #81. It cuts fine in the X plane but it won't turn to cut in the Y axis.
Please any help would be greatly appreciated!!!
Is there anyone who remembers anything about this machine?
Can anyone direct me to support on this problem Please?