|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Biesse FT440 PLC Error7/15
Been having ongoing problems with our old 440FT stopping mid-cut with error message "PLC432 > Peripheral device not working ybn.1.2.6
Anyone got any ideas to narrow it down a bit??
Dave, sorry to hear about the problem..this is a common problem that is normally fixed by additional grounding, or checking existing grounding
need to see in electric diagram which is the correct module(1.2.6)
AL4A4 (CE201) module that is prior to the CE305 module on this channel could also be faulty, or the communication cable between them. 1.2.6 is the address for the CE305 on the drill block as you mentioned.
As Dylan mentioned, make sure your grounds are good. Would not hurt to put 8' copper ground rod behind machine, connect that to the main ground wire by the wire track.
Are you cutting MDF by chance ?