|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Parametric Programing for Frog 3D8/12
I am stumped!
I made the program so that the center of the circles are at X=0 Y=0. Then I added an offset so that that program in inside my stock.
WHILE #qCOUNTERX<#qNUMBERX DO
If anyone has any tips on how I can get this working I would really appreciate it.
Never liked canned repeat cycles so I just made a toolpath for each duplicated circle. That way I am sure.
Loop program like this are a life saviors. You just need to change the amount of part you need. Why spend all that time to redraw and reprogram?