Vacuum Lifts
9/14/16
I've been thinking about a Vacuum lift to help move sheet material to my CNC. What brand is everyone using? Looking for recommendations on a quality brand.
9/14/16 #2: Vacuum Lifts ...
Tawi lift is what we bought about 10 years ago. Use it everyday. I figure if it saves one back injury it pays for itself immediately.
http://tawi.com/
9/14/16 #3: Vacuum Lifts ...
Schmalz, no problems what so ever.
9/14/16 #4: Vacuum Lifts ...
Website: http://www.commercialdoorandhardware.com
I second Schmalz, I use 2 of them, you will have to decide on a turret or a straight track. I have 40' of straight track on both.
9/14/16 #5: Vacuum Lifts ...
As with Phil, we have two straight tracks, one in front of the router and one that goes down the assembly line. If we have a job where the lift is efficient for assembly, we just move it over there temporarily and use a scissor lift at the CNC.
9/15/16 #6: Vacuum Lifts ...
We have a Schmalz with 60 feet of track that services 16 sheet/items and services 2 machines.
9/16/16 #7: Vacuum Lifts ...
bought a gorbel/anver on ebay Never looked back Just replaced the pick up tube for 380.00 Anver was incredible to deal with. Service was just stellar