|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Evolution for Buselatto2/26
Click the link below to download the file included with this post.
A couple of ideas if they weren't already suggested:
Have you re-installed from scratch? Un-install, delete C:\evol\ and start over?
Assuming the W2000 pc is on the network, how about upgrading it to XP or Win7 with XP Mode? Some updates may have installed that are causing the errors.
Update, thanks Bill for the suggestions. I did try again and one thing I forgot to mention before. When installing I get an error about a file in use "C:\WINNT|System32\ATL.DLL" I have ignored it after retrying a few times. The rest of the install is OK but the program still errors on launching. The computer has not had any updates for a long time and this problem just started last week.
Try another uninstall, reinstall, delete C:\evol and this time reboot before the re-installation. And make sure no other programs are running (check startup folder) to make sure no other programs are using the atl.dll. That's the extent of my suggestions lest someone mistakes me for an IT guy....
Just wondering if this issue was ever resolved? Currently having the same problem with our Busellato, while running it on W2000 as well. Tried re-install from scratch, same issue...corrupted file perhaps? Any info would be much appreciated!
#5: Evolution for Buselatto ...