|Home » Forums » CNC » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Dovetail tool for CNC machines?1/27
I am considering purchasing a dovetail drawer tool for our shops CNC. I am concerned that the product will take too long to mill, and still not be as good as a purchased dovetail drawer from a supplier.
Here is the vortex video. You can judge yourself. https://www.youtube.com/watch?v=lEi5xU3-mbk
I personally ran the dovetail bit from vortex ,,with cabinet vision ,,and it is spot on,,,,,
Itís a kit made up of a 25 down and the profile cutter
A full sheet of parts, about 8 drawer boxes, takes 25-30 min to run.
We started doing all our custom size drawers and pullouts this way but I definitely wouldn't want to cut all our drawers.
I have a Vortex setup to sell for 50% off. (I had to use a bit provided by my software company)
Robert that is interesting. What program do you use?
I use Routercad
Robert how much do you want for the kit,,,and which model do you have ,,square or rounded,,,