CNC

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Machining contour elevation paths on a CNC router

10/7/19       
Bryce

Website: http://blackmouthdesign.com

I am working on a project where we are attempting to machine a water droplet wave effect into a piece of wood. I was hoping to come up with a way to machine it all at once, but with each pass following a contour line, a specific "elevation" like on a map.
Typically the router path would be parallel lines, the tool head moving in the Z axis as it goes along the relief. We are looking to do the water effect with one pass with a large tool as we are removing a lot of material, and using that method will create very distorted shapes.
I figure if I can get the tool paths to follow the contours at a static Z height, like the contour lines on a topographic map, the circular shapes and water effect would be preserved. And would maintain a decent runtime. Anyone ever done anything like this?

10/8/19       #3: Machining contour elevation paths o ...
Mike

What CAM program are you using and how are you supplying data? Do you have a solid to machine, a surface, or just a profile to apply to geometries? Mostly depends on how you generate toolpaths.

10/8/19       #4: Machining contour elevation paths o ...
Dropout Member

Best if you post a pic.

If it's topographical lines, name each one as a layer with the depth as part of the layer name. Cut the outside of the shape at that depth and voila.

10/8/19       #5: Machining contour elevation paths o ...
Bryce

I am using Solidwoks to create the 3D file, and Enroute6 to create the tool paths.

Here is a small sample image: https://imgur.com/c27YyPh

Dropout - I was thinking of trying something like that. I would need to slice the part into layers first to get the contour paths at each depth though, correct?

10/8/19       #6: Machining contour elevation paths o ...
Dropout Member

I think so. Would need all closed shapes.

Why not just 3D cut it?

10/8/19       #7: Machining contour elevation paths o ...
Bryce

If I just 3D cut it the typical way, the circles would get pretty distorted, sea shell like. This can be countered by using a small bit and doing finish passes, but that will be far too slow for what we are doing. We'll be create this texture on a whole 4'x8' sheet.

Here's what the software wants to do: https://imgur.com/a/JcTXeEl
And this is what I want it to do: https://imgur.com/a/6ib0zRt

10/9/19       #8: Machining contour elevation paths o ...
Richard

Hello Bryce,

Looks like there's 2 things to solve here. Firstly you need to efficiently generate the geometry you wish to toolpath. Enroute has a slice feature whereby you can slice the relief. You could then get an outline of the resulting slices at different depths.

The 2nd part is the toolpathing. I am not sure that following this geometry will give you what your are looking for. The surface has multiple concave sections of different diameters. I dont quite see what tool could produce this surface by following these contours. What kind of tool did you have in mind?

If you want you can email your Enroute file to me. I don't mind looking at it.

Good luck!

Richard

10/10/19       #9: Machining contour elevation paths o ...
EJ

Website: http://www.thinksai.com

The fill toolpath is based on the perimeter shape, not the shapes contained within the surface. There is no way to base the 3D fill toolpath to follow contours within the surface itself unless you have 2D shapes to match the surface. And even then, it would not look like what you are desiring in the drawing.

You can create this effect by drawing a bunch of circles and then doing a 3D engrave with a large radius tool (3 inch cove tool).

Example

10/11/19       #10: Machining contour elevation paths o ...
John Meachen Member

It seems that what is needed is a 3D roughing cut,followed by a 3D finishing cut.The exact machining strategy may be governed by the software's ability to deal with 3d objects.One approach might be to use the contour lines (plus a little offset for the finishing cut) and the boundary of the workpiece as a series of pocket cutting operations.The earlier suggestion to just cut contours might leave a lot of other material to be removed.

With the bulk of the material out of the way,you could switch to a 3D finishing cut with a large enough tool to give a good surface finish.For the detail areas you may be fortunate enough to have a software package that allows you to create boundaries so the small tool is confined to those areas and doesn't consume lots of time traversing the entire surface.I know the technique works as I have used it often to create master patterns for composite mouldings.


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Suction Cups, Vacuum Lifters, Vacuum Pumps from Anver Corporation ecabinet systems.com Thermwood Limtech Industries, Inc.