CNC

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

need a cheap 4 x 8 cnc router

3/9/18       
michael ricchiuto Member

I'm starting a new business . In need of an affordable 4 x 8 CNC. I cant seem to find any besides the vey expensive routers. I'm only manufacturing 1 item so will only need the xyz axis. Any input would be helpful. Tank you.

3/9/18       #2: need a cheap 4 x 8 cnc router ...
rich c.

I'd suggest you find a shop to cut the parts for you. No machinery investment at all then. If cheap and 4x8 are your only requirements, import one from China.

3/9/18       #3: need a cheap 4 x 8 cnc router ...
Dropout Member

Affordable in terms of initial cost or in terms of operating cost or in terms of part cost.

Not all the same.

3/9/18       #4: need a cheap 4 x 8 cnc router ...
Chevy

Website: http://keysoftwareservice.com

Cheap = headache

Research a lot,,before wasting 15k

Cost router
Rigging
Installation
Air
Electrical
Dust collector
Air dryer
Software

Salesmen/youtube put on a great show,,
There are generations of experience on this website,,

Chev

3/10/18       #5: need a cheap 4 x 8 cnc router ...
B.H. Davis Member

I visited Don at DB CNC Routers last weekend and was impressed with what he is producing in the $7000.00 range. This is really inexpensive for any 4x8 router but his construction and knowledge are solid. I'm actually considering one of his machines for my own home shop.

At that 4x8 entry price range you get stepper motors on all 3 axis, lead screws on X and Z and rack and pinion on Y. You also get Mach3 software and a tower PC. The spindle is small but extremely quiet and comes with a single phase input inverter. There are numerous upgrades available including servos and higher HP spindles.

Don has been making these machines for a number of years and has numerous satisfied customer references. I'd suggest checking out his machines at the link below.

BH Davis

DB Cnc Routers

3/10/18       #6: need a cheap 4 x 8 cnc router ...
katz

we have second hand ,but after recondition
with servo motor ,weihong controler(windows xp) very good condition
5k
without vacuum table
also have one second hand usa made
with steper motor and included vacuum table
same price

3/11/18       #7: need a cheap 4 x 8 cnc router ...
Dropout Member

We should probably start with what parts are you making?

4/27/18       #8: need a cheap 4 x 8 cnc router ...
leon513  Member

Website: http://www.hicasmachinery.com

The factory that produces woodworking machinery from China mainly deals in panel furniture, cnc router, edge banding machines, and sanding machines. And we have CE certificates that meet international standards. We have our own patents for some machines. If you are just a furniture factory that needs our machines, first of all, we will provide you with customized machines, make machine adjustments according to your process, and then help you out with a complete set of factory planning services. If you are an agent, we will provide a prototype based on your market needs. The service department will provide technical training for you and will help you to do exhibitions and branding. Please come to the vendor to discuss the form of cooperation that is more in line with your requirements.


View higher quality, full size image (800 X 800)

https://www.hicasmachinery.com/product/atc-cnc-router.html

6/5/18       #9: need a cheap 4 x 8 cnc router ...
Cherry Stylecnc Member

Website: http://stylecnc.com

Jinan Style Machinery Co.,Ltd specializes in the development and manufacture of CNC router machines. we have cheap and high quality CNC router machine for your choose.
welcome to contact with me.


View larger image


View higher quality, full size image (720 X 540)

https://www.stylecnc.com/cnc-wood-router/Wood-cnc-router-machine-STM1325-price.html

6/7/18       #10: need a cheap 4 x 8 cnc router ...
JOHN A WALKER  Member

I have a 5ft. x 12ft router with time to cut
if you are interested in having someone cut for you.

7/14/19       #11: need a cheap 4 x 8 cnc router ...
Zomai CNC

Website: http://www.zomaicnc.com

Jinan Zomai CNC Machinery, the professional CNC router and wood turning lathe machine manufacturer in China. We have cheap and high quality CNC router machine for your choose. welcome to contact with me.


View larger image

3/4/21       #14: need a cheap 4 x 8 cnc router ...
BuyCNC Member

Website: https://buycnc.com

This is a multi spindle drilling milling machine,it supportspindle integrated control for multi-head from 2 to 4pcs.You can can delivery command to spindles to work in tandem, also can work similarly as CNC router with an auto tool changer.This 4 spindle CNC machine kitchen cabinets allows users to set different tool path for different spindles (cutters), similar working mode as an auto tool changer.When the first spindle complete its work, the second spindle (cutter) can go on its own work automatically.The most important advantage of the multi spindle cnc router for sale is its high speed of spindle changing or we call it cutter changing.It only takes 2 seconds to turn on the spindle in advance for preheating.And you can use different spindle, from 800w to 6.5kw, do not have to use 8.5kw ATC spindle to drill holes. 4 spindle cnc router


View higher quality, full size image (569 X 440)

Multi Spindle CNC Router For Sale

5/30/21       #15: need a cheap 4 x 8 cnc router ...
FORSUNCNC Member

Website: https://forsuncnc.com/

If you need to buy a 4*8 CNC router machine, I suggest you check it on our website. There are many models in it, and the product is cost-effective.

FORSUN Smart CNC router machine is a high-quality Wood CNC Router that fits for 2D and 3D milling, cutting, engraving, carving, and slotting in relatively little time on wood, plastic, PVC, Acrylic, Aluminum, and any other materials. This CNC Router is one entry-level Wood CNC Router Machine. Easy to learn and operate and comes at a low price.


View larger image


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Sponsors
    • W. Moore Profiles, Ltd.
      Supplying Knives and Cutters to the Woodworking Industry - Standard and Custom Profiles Available
    • T-Tool USA LLC
      Quality Tool-Holders, Tooling Supplies and Accessories for Numerous Cutting and Grinding Applications
    • Industrial CNC
      Affordable, Easy, Industrial Grade CNC Routers for Woodworking and Cabinetmaking - Free Lifetime Support
    • American National Knife
      Manufacturer of HSS and Carbide Tipped Woodworking Knife Sets for Planers, Jointers, Molders, Shapers
    • Carter Products
      Band Saw Guides, Blades, Wheels, Tires, Line Lasers and 2D Projectors, Wide Belt Sanding Accessories, Vacuum Holding Systems and More
    • Thermwood Corporation
      Computer Numerical Control (CNC) Routers and Accessories
    • MachineryMax
      New and Used Machinery for the Professional Woodworker
    • Country Saw & Knife
      Complete Sharpening Services for Wood and Metal Saw Blades, Jointer Knives, and Bandsaw Blades
    • Rangate
      Woodworking Machinery, Supplies and Knowledge
    • Tooling on the Web
      Tooling and Tooling Accessories - Free Re-Sharpening for Qualifying Tools
    • MARTIN Woodworking Machines Corp.
      Quality Woodworking Machinery Engineered and Manufactured in Germany
    • Shop Gear Inc.
      Distributor of Co-matic Power Feeders, Le-matic Portable Edgebanders, and Supplier of Woodworking Machinery, Tooling and Accessories in North America
    • Weinig Group-USA
      Wood Moulders and Knife Grinding Equipment

    Become a Sponsor today!