|Home » Forums » Dust Collection, Safety and Plant Operation » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
I'm looking for something like a cam-lock for a dust collector hose.
I use rarely use my saw or shaper (I'm a CNC house) so I'd like to have one hose that I can move between them as I need to.
I have a planer and shaper with a similar scenario. I just screwed a metal blast gate to the end of my hose and put the appropriate couplers on both machines. Then, with the hose connected to the machines, I drilled a hole in the top of the coupler and through the blast gate so I could drop a screw or bolt through just to prevent them from vibrating apart. Works fine for us..
check out air handling systems.