view most recent new threads at all WOODWEB Forums
You are not logged in. Why should I log in

Sign up, and become a WOODWEB Member ... learn about the benefits.

• Kremlin tip selection for waterborne Chemcraft?   posted by: Kevin absto -- 4/19
  3 responses -- 4/22
• kremlin 10-14 pump problem   posted by: Jeff -- 4/17
  3 responses -- 4/18
• compressed air issue   posted by: John S -- 4/17
  4 responses -- 4/18
• Kem aqua plus white spraying technique   posted by: Matt Calnen -- 4/16
  5 responses -- 4/21
• post cat problems   posted by: Patrick -- 4/16
  6 responses -- 4/17
• chemcraft verde smell   posted by: cwwoodworking -- 4/15
  6 responses -- 4/17
• MLC Aguatana   posted by: nick -- 4/12 --  1
  8 responses -- 4/15
• Painting cherry cabinets   posted by: Mastercabman -- 4/5
  5 responses -- 4/13
• SAYERLACK Hydroplus AF71 VS Valspar WB C.V   posted by: Robert -- 4/2
  10 responses -- 4/12
• Rub through finish   posted by: Dan -- 4/2
  8 responses -- 4/6
• CV corner fine cracks   posted by: Kris -- 4/2 --  1
  2 responses -- 4/4
• Plastic pails in gallon pot   posted by: Mark B -- 4/1
  0 responses
• Target EM 6500 pigmented   posted by: al -- 3/28 --  1
  6 responses -- 4/11
• Rub Throughs   posted by: John Bishop -- 3/26 --  1
  7 responses -- 4/5
• Spray System Cleaning Lacquer Thinner Good Price   posted by: Mike -- 3/25
  9 responses -- 3/28
• Pricing for finishing cabinet doors   posted by: Jacob -- 3/21 --  2
  33 responses -- 4/6
• finishing between kerf cut slats   posted by: Mark Newton -- 3/19
  5 responses -- 3/21
• Air entrapment or entrainment on Sapele   posted by: Terry Benetto -- 3/19
  2 responses -- 3/20
• AAA with catalyst pump   posted by: Dan -- 3/17
  3 responses -- 3/20
• Stain issues   posted by: Mike Fuson -- 3/16 --  3
  38 responses -- 3/28
• Canlak reviews   posted by: Dan -- 3/16
  3 responses -- 3/24
• Cleaning my new Kremlin 15C25   posted by: Mike -- 3/13
  18 responses -- 3/18
• Painted Wood Panel on Dishwasher Peeling   posted by: Myron -- 3/6
  5 responses -- 3/7
• 2nd topcoat applied just after 1st coat flash with CV - inferior?   posted by: pdub -- 3/5
  3 responses -- 3/18
• Covering deep oak grain with waterbased finish   posted by: Paul O in Ontario -- 3/2 --  1
  7 responses -- 3/5
• ML Campbell Agualente plus   posted by: vin -- 3/1
  7 responses -- 3/8
• Hate these "how would you achieve this finish" but...   posted by: Mark B -- 3/1 --  2
  8 responses -- 3/8
• Dipping an oil / varnish blend   posted by: Ben Aroh -- 3/1
  7 responses -- 3/21
• How do I achieve this look   posted by: Liz -- 2/27 --  1
  8 responses -- 3/3
• milesi poly 2k solvent based   posted by: antonio -- 2/27
  0 responses
• Questionable finishing practices   posted by: Chris -- 2/26
  7 responses -- 3/8
• Dealing with runs....   posted by: Jacob -- 2/25
  12 responses -- 3/24
• Regulator for gravity gun question   posted by: Duane Slaymaker -- 2/21 --  1
  7 responses -- 2/22
• RE: Hard Backing Board   posted by: Tommy -- 2/20
  0 responses
• Butyl acetate and Magnaklear   posted by: Jacob -- 2/20 --  1
  10 responses -- 2/22
• custom NGR stain   posted by: mike mcnerney -- 2/19 --  2
  5 responses -- 2/23
• How to make stains with 824 utc   posted by: Jim -- 2/17 --  1
  3 responses -- 2/23
• Recomendation on Sander + Wirebrush Machine (mid-size prodduction flooring)   posted by: Dustin -- 2/17 --  1
  3 responses -- 3/25
• looking for curtain coater for laquer finish on wood components   posted by: Brian Wunder -- 2/15
  1 response -- 2/15
• Spraying ICA with gravity gun   posted by: Dan -- 2/13 --  1
  12 responses -- 2/18
• Staining / protecting wood sculpture   posted by: David Wipf -- 2/10
  8 responses -- 2/12
• stripping and refinishing to natural   posted by: Ben C -- 2/7
  6 responses -- 2/8
• Darkening Exterior Shutters Finished With Spar Varnish   posted by: Steven -- 2/7
  4 responses -- 2/9
• Heater for chemical storage room   posted by: Mike -- 2/6
  4 responses -- 2/12
• semi-open pored woods and air entrapment   posted by: the google -- 2/5
  4 responses -- 2/6
• Help with matching finish   posted by: Chris -- 2/3 --  1
  5 responses -- 2/5
• Need help matching finish   posted by: Chris -- 2/3
  1 response -- 2/5
• Finishes   posted by: Chris -- 2/3
  17 responses -- 2/6
• Magnamax in California   posted by: Manu -- 2/2
  3 responses -- 2/6
• dew point and trouble finishing   posted by: the google -- 2/2
  5 responses -- 2/6
• ICA distributors   posted by: Ave. Joe -- 2/1
  2 responses -- 2/2
• Walnut- gray stain?   posted by: John -- 1/31
  12 responses -- 2/1
• Dyed Walnut Table Top   posted by: John Bishop -- 1/30
  1 response -- 1/30
• 2K poly over glaze?   posted by: Bill -- 1/29
  2 responses -- 1/30
• Touch up sprayers   posted by: Chris -- 1/28
  2 responses -- 1/30
• Throat Seal Lube and Fisheyes   posted by: Kevin -- 1/25
  7 responses -- 1/28
• D-Dur vs. M.L.Camp 2KPoly   posted by: Steve Juhasz -- 1/23
  1 response -- 1/25
• Door panels shrunk   posted by: David Yurk -- 1/23 --  1
  8 responses -- 2/6
• Primer colour.   posted by: Bill -- 1/23
  6 responses -- 1/28
• RE: Walnut Color fade?   posted by: Tommy -- 1/22
  8 responses -- 2/4
• Bubbles in finish   posted by: Jacob -- 1/22
  4 responses -- 2/16
• Best finish for wood veneer snowboard   posted by: Rob Kerr -- 1/22 --  1
  3 responses -- 2/16
• heating finish (in-line heaters or others)   posted by: the google -- 1/22
  0 responses
• Dyeing wood all the way through (Ebonizing)   posted by: Greg Aanes -- 1/20
  8 responses -- 1/23
• Oil-based trim and siding paint as a garage door clear finish   posted by: Jim T -- 1/19
  1 response -- 1/19
• Inflow filter Kremlin 10-14   posted by: Michael H -- 1/17 --  2
  8 responses -- 1/19
• Seriously purchasing two stager compressor for spraying   posted by: Mike -- 1/16 --  4
  69 responses -- 2/3
• ilva diamante poly   posted by: dar -- 1/16
  2 responses -- 1/21
• Mahogany grain filler/glaze   posted by: dub -- 1/15 --  1
  5 responses -- 1/16
• Finishing one piece doors cut on CNC   posted by: Robb Parker -- 1/12
  21 responses -- 3/2
• Advice for setting up small finishing room   posted by: Ryan p. -- 1/11
  1 response -- 1/12
• Custom white lacquer   posted by: Stefano -- 1/11
  2 responses -- 1/11
• Silica gel desicant beads   posted by: Tom gafgen -- 1/5 --  1
  2 responses -- 1/6
• Sayerlack Sheen Problems   posted by: mark hurley -- 1/4
  2 responses -- 1/8
• Less Oily Danish Oil/Substitute   posted by: Todd -- 12/29
  10 responses -- 1/8
• Ventless Spray Booth   posted by: Puzzleman -- 12/29 --  2
  7 responses -- 2/19
• Finish recommendations for Civilians.   posted by: cabmaker -- 12/27
  7 responses -- 1/4
• Finish Room Heating   posted by: seidoww -- 12/27
  3 responses -- 12/27
• Bleaching maple   posted by: Stefano -- 12/22
  2 responses -- 12/23
• Advice needed for new spray system   posted by: Josh Koschak -- 12/21
  17 responses -- 1/2
• Finish Coverage Rates   posted by: Matt -- 12/19
  3 responses -- 12/22
• Add more finish to expired pot life finish?   posted by: Jeffer -- 12/19
  4 responses -- 12/19
• Finishing Products   posted by: Dan Minzner -- 12/19
  13 responses -- 12/30
• Mixing different brand names of rubbing stain?   posted by: Jeffer -- 12/18
  7 responses -- 12/20
• Fuji HVLP with off-brand spray gun?   posted by: Gary -- 12/16
  5 responses -- 2/23
• MLC Agualente, Valspar Zenith, General finishes   posted by: Jonathan Mahnken -- 12/14 --  1
  9 responses -- 12/17
• 2k urethane   posted by: Longarm -- 12/11
  4 responses -- 12/12
• sand between coats   posted by: mike mcnerney -- 12/11 --  1
  7 responses -- 12/18
• Dye Concentrate   posted by: Luke -- 12/11
  1 response -- 12/12
• problems with shellac over poly...   posted by: mike -- 12/10
  10 responses -- 12/11
• Waterborne paint   posted by: Matt -- 12/8 --  1
  9 responses -- 12/13
• AAA spray pattern issue SW CV   posted by: dub -- 12/8
  3 responses -- 12/21
• understanding VOCs   posted by: mike mcnerney -- 12/7
  1 response -- 12/7
• 5 Gallon Dispenser   posted by: Mark B -- 12/7
  4 responses -- 12/11
• Finish for restaurant tables   posted by: John -- 12/6
  2 responses -- 12/8
• Gun Filter clogging up quickly with sediment?   posted by: Charles -- 12/6 --  1
  11 responses -- 12/9
• White conversion varnish   posted by: Hazeltree -- 11/30
  5 responses -- 12/3
• flushing lines after waterbourne   posted by: tiptop -- 11/29
  9 responses -- 12/6
• dust removal   posted by: Scott -- 11/25
  8 responses -- 11/27
• Pail warmers for water based?   posted by: Jonathan Mahnken -- 11/22
  7 responses -- 12/7
• Wood Grain Issue   posted by: ColorPro -- 11/22
  2 responses -- 11/28
• Flat Line vs. Conventional   posted by: Family Man -- 11/21
  5 responses -- 11/22
• Building A Spray Booth   posted by: Daniel -- 11/21
  10 responses -- 12/27
• Fisheye!   posted by: jacob -- 11/20
  4 responses -- 11/21
• Mitre or butt joint   posted by: Caradd -- 11/18
  4 responses -- 11/19
• waterbase glaze   posted by: Derek Decker -- 11/17
  1 response -- 11/18
• Oxalic removed stains returning   posted by: Ed Arthur -- 11/15 --  1
  11 responses -- 11/18
• laquer blushing   posted by: Tom Stevens -- 11/15 --  1
  5 responses -- 3/17
• Does gloss 2k Poly pigmented benefit from a clearcoat?   posted by: Matt -- 11/15
  4 responses -- 11/16
• Thinning Lenmar Plus, conversion varnish   posted by: Willem Martins -- 11/11
  9 responses -- 1/11
• Spray Booth Heaters   posted by: scott -- 11/9 --  1
  6 responses -- 11/18
• positectors   posted by: antonio -- 11/8
  0 responses
• Over spray?   posted by: Jim -- 11/8
  6 responses -- 11/16
• Best brush for conversion varnish?   posted by: Matt -- 11/8
  12 responses -- 11/9
• Sealer coats   posted by: Robert -- 11/2
  9 responses -- 12/21
• poly 2k   posted by: antonio -- 11/1
  6 responses -- 11/13
• Ever tried Renner water base ?   posted by: Robert -- 10/31
  2 responses -- 11/3
• S2 Stain   posted by: Dave Bernhardt -- 10/31
  1 response -- 11/8
• Rubio Monocoat   posted by: Linda Mayo -- 10/27
  3 responses -- 10/29
• Spay gun cases   posted by: ColorPro -- 10/26
  1 response -- 10/26
• looking to achieve that NC look on walnut using WB   posted by: Thom -- 10/25 --  2
  6 responses -- 10/26
• Paint shaker options for 5g can? No whirleybirds   posted by: Matt -- 10/23
  1 response -- 10/23
• Oil, film or nothing   posted by: Craig Caughlan -- 10/22
  1 response -- 10/24
• Sherwin Williams advance high gloss cratering   posted by: Justin Long -- 10/22
  6 responses -- 10/23
• Grout residue on finish   posted by: Paul -- 10/21
  4 responses -- 11/13
• SPRAYING ILVA AND GRACO GX 19   posted by: Nick Estvold -- 10/21 --  1
  3 responses -- 11/21
• Alcohol soluble resins   posted by: Derek Smith -- 10/19
  9 responses -- 10/21
• Fixing defects in low sheen 2k poly   posted by: Brian -- 10/16
  4 responses -- 10/17
• Finish over Waterlox, other shameful advice needed.   posted by: Matthew -- 10/16
  6 responses -- 10/23
• Veiling Lacquer   posted by: MSC -- 10/14
  9 responses -- 10/17
• Door Rotisserie   posted by: Josh Sollars -- 10/9 --  1
  11 responses -- 10/20
• Waterborne finish with glaze issue   posted by: Joe -- 10/8
  17 responses -- 10/29
• Glaze alternatives   posted by: Kevin -- 10/5
  13 responses -- 3/17
• Agualente primer revisited   posted by: Jonathan Mahnken -- 10/5
  11 responses -- 12/10
• Automatic stirrers, for small quantities (1 gal or under)?   posted by: Matt -- 10/4
  6 responses -- 10/9
• Exterior Door Stain   posted by: John -- 10/3 --  1
  11 responses -- 11/15
• Refinishing Shop in the Houston area?   posted by: Michael Foscone -- 10/3
  0 responses
• Taming Chatoyance???   posted by: Doyle E. Hale -- 9/28
  27 responses -- 11/28
• Finding qualified finish employees   posted by: Colby Olhausen -- 9/27 --  1
  8 responses -- 10/18
• Finishing wood bar top   posted by: scott -- 9/26 --  1
  9 responses -- 12/14
• Spraying Sayerlack Hydroplus with a CATech Bobcat   posted by: pdub -- 9/26
  6 responses -- 11/2
• CV for a washcoat?   posted by: Caradd -- 9/19
  1 response -- 9/19
• Best spray equipment for waterborne.   posted by: Leslie -- 9/19
  8 responses -- 11/13
• spraying white   posted by: nicko -- 9/17 --  2
  15 responses -- 10/6
• Finishing onsite   posted by: B.H. Davis -- 9/16
  7 responses -- 3/18
• measuring film thickness   posted by: Kevin Jenness -- 9/14 --  1
  4 responses -- 9/15
• Finish for reclaimed wood   posted by: Carmine -- 9/12
  5 responses -- 9/13
• Low profile paint booth   posted by: John -- 9/11
  1 response -- 9/11
• Staining Knotty pine to match a 50 year old home   posted by: Luke -- 9/9 --  1
  9 responses -- 9/24
• first time smoothie user   posted by: Nick -- 9/8 --  1
  5 responses -- 9/9
• UV cure finish needed   posted by: Jim Knowles -- 9/7 --  1
  8 responses -- 11/15
• Finishing machinery   posted by: Gene -- 9/6
  3 responses -- 9/12
• white stain on oak   posted by: dar -- 9/3 --  1
  16 responses -- 9/7
• CV & 3M   posted by: John Bishop -- 8/28 --  1
  3 responses -- 9/1
• How fine do we need to filter our air?   posted by: David Waldmann -- 8/24
  0 responses
• wooden door in shower   posted by: Ed -- 8/20
  8 responses -- 8/29
• finishing wood tops   posted by: stephen -- 8/18
  13 responses -- 8/26
• ICA Cna stain base pricing   posted by: Dave Edgerton -- 8/17
  6 responses -- 8/21
• Black Cabinets   posted by: Jim Clark -- 8/17
  5 responses -- 8/19
• Favorite gun cleaning brushes/kits??   posted by: Matt -- 8/17
  5 responses -- 8/22
• Shooting ICA Polyurathane   posted by: ColorPro -- 8/17 --  1
  10 responses -- 9/5
• Purple Stain   posted by: Kevin -- 8/16 --  2
  11 responses -- 12/29
• Touch up #0001   posted by: Paul -- 8/12
  3 responses -- 3/18
• 3M respirator filter for Conversion varnish   posted by: al -- 8/11
  21 responses -- 8/19
• Off Gas   posted by: WCW Chris -- 8/9
  11 responses -- 8/11
• Cabinets shipping to Hawaii   posted by: Bart -- 8/3
  3 responses -- 9/1
• Fastest Drying White for Samples   posted by: Mark B -- 8/2
  5 responses -- 8/7
• Bondo type product to fill small miter joints prior to finishing   posted by: Leslie Desnick -- 8/1
  11 responses -- 8/10
• Best way to repair?   posted by: Folz Cabinets -- 7/27 --  1
  25 responses -- 8/18
• pressure pot   posted by: bob -- 7/25
  3 responses -- 7/25
• Need help finishing wood coffee table   posted by: Alex kacperski -- 7/24
  3 responses -- 7/26
• Waterborne finish and hickory   posted by: Jeremy -- 7/23
  11 responses -- 8/7
• Polyurethane problem   posted by: Ken Stanislav -- 7/22
  3 responses -- 7/25
• splitting in stain grade painted cabinets doors   posted by: Bruce Robinson -- 7/21 --  1
  1 response -- 7/21
• Flat painted plywood doors   posted by: Stewart -- 7/18
  11 responses -- 8/14
• Refinish ideas for light oak?   posted by: scott -- 7/15
  0 responses
• hvlp   posted by: Jim -- 7/6
  7 responses -- 8/24
• Help! - Spilled cv   posted by: Patrick -- 7/6
  1 response -- 7/6
• waterborne on one piece shaker   posted by: Roy -- 7/4
  1 response -- 7/6
• AAA fluid hose diameter   posted by: Kevin -- 7/4
  3 responses -- 7/5
• What are they called   posted by: Mike -- 7/3 --  1
  3 responses -- 7/4
• Pinks Spots on Painted Cabinetry   posted by: Bryan Kappenberg -- 7/3
  14 responses -- 7/14
• White streaks in Shellac   posted by: Michael -- 6/29
  6 responses -- 6/30
• Mixing   posted by: Pinetree -- 6/28
  4 responses -- 8/22
• Enviromax by MLC   posted by: Mastercabman -- 6/26
  0 responses
• Dark Stain on Wire Brushed Oak   posted by: Tom -- 6/26 --  1
  7 responses -- 7/1
• spraying latex paint   posted by: Jeff -- 6/26
  2 responses -- 6/27
• installing painted 1 piece mdf doors in new construction before A/C   posted by: harold morantz -- 6/26
  4 responses -- 6/26
• Forced (heat) curing, small batches.   posted by: Matt -- 6/26
  3 responses -- 8/2
• Overspray   posted by: Chris -- 6/25
  9 responses -- 8/22
• Metallic Gold Spray Paint   posted by: Tony -- 6/23
  7 responses -- 10/5
• Solvent recycling worth it?   posted by: Matt -- 6/19 --  1
  5 responses -- 6/26
• Striping in cv   posted by: Ryan -- 6/16
  3 responses -- 6/19
• Old Masters water based poly - finial finish   posted by: henry -- 6/16
  0 responses
• Sheen for inside boxes   posted by: Vince -- 6/13
  14 responses -- 6/16
• parts washer for spray guns   posted by: Dan Cook -- 6/10
  1 response -- 6/20
• Spray stain on Maple   posted by: Nick Cook -- 6/10
  8 responses -- 6/15
• Cefla Mito vs Makor Q One   posted by: John J -- 6/9 --  1
  1 response -- 3/24
• epoxy sealer under 2k poly?   posted by: Nick -- 6/8
  4 responses -- 6/9
• textured clear coat (anti slip but fine grit)   posted by: Mitch Bray -- 6/7 --  1
  6 responses -- 6/19
• thinner vs retarder   posted by: the google -- 6/5
  14 responses -- 7/20
• Bleed through   posted by: Pinetree -- 6/3
  3 responses -- 6/5
• VERY UNIQUE SITUATION AND NEED HELP   posted by: Mike -- 6/3
  13 responses -- 6/10
• Minwax Espresso penetrating stain   posted by: Rod -- 6/2
  8 responses -- 6/7
• airless orientation   posted by: sibbs -- 6/2
  1 response -- 6/2
• table refinish   posted by: Paul -- 5/31
  2 responses -- 6/3
• Cleaning Poplar for tinted lacquer   posted by: Brian Dowdy -- 5/31
  25 responses -- 6/26
• Favorite strainer for 3/8" pickup tube on AAA?   posted by: Matt -- 5/31 --  1
  4 responses -- 6/1
• Cerused finishes   posted by: Mike Spencer -- 5/31 --  1
  8 responses -- 6/1
• Pump workflow   posted by: Mario Castelo -- 5/31
  2 responses -- 5/31
• Repairing Restaurant Tables   posted by: Stan Palmatier -- 5/30
  1 response -- 5/31
• ICA WB clear coats.   posted by: Denny J -- 5/30
  3 responses -- 6/3
• Blotchy results when spraying toner   posted by: Bob Walberg -- 5/28
  6 responses -- 5/31
• kremlin replacement oring part #   posted by: aj -- 5/27
  11 responses -- 5/30
• Disposing of chemical waste   posted by: Mike -- 5/25
  10 responses -- 5/31
• Exterior Door   posted by: Todd -- 5/24 --  1
  3 responses -- 6/2
• ML Campbell Aguatana   posted by: Pat -- 5/24
  2 responses -- 5/30
• darkening wood   posted by: Mike -- 5/24 --  1
  4 responses -- 5/25
• conversion varnish over oil   posted by: bruno -- 5/23
  7 responses -- 5/25
• Tacky lacquer   posted by: Mike G -- 5/22
  3 responses -- 5/23
• Kremlin parts   posted by: Dan cook -- 5/18 --  1
  4 responses -- 5/25
• white pigmented conversion varnish VS. urethane 2k   posted by: antonio ageeb -- 5/18
  7 responses -- 5/21
• Waterborne finish on a wetbar wood top   posted by: Matt Calnen -- 5/17
  5 responses -- 5/22
• Hymmen profiicoater ??   posted by: Les Robertson -- 5/16
  0 responses
• Kem Aqua Plus   posted by: John B -- 5/15
  16 responses -- 5/18
• Are inline gun filters re-usable?   posted by: Charles -- 5/14
  4 responses -- 5/15
• Spraying sealer from 55 gal drums   posted by: Alan -- 5/11
  8 responses -- 5/15
• Kremlin- rexson pumps   posted by: David Johnson -- 5/11
  7 responses -- 5/15
• minimum temp for applying vinyl sealer   posted by: nick -- 5/10 --  1
  3 responses -- 5/13
• Ext Enamel on Aluminum   posted by: Paul S. -- 5/9
  4 responses -- 5/10
• Alcohol dye stain spraying.. use a retarder?   posted by: Vince -- 5/8
  35 responses -- 6/10
• How do you establish color consistency?   posted by: Adam West -- 5/7 --  1
  2 responses -- 6/27
• Kremlin HP 60   posted by: Marco Silva -- 5/7
  1 response -- 5/8
• bleached walnut   posted by: mike j. -- 5/6
  4 responses -- 5/10
• RE: Finishing a Hardwood   posted by: Tommy -- 5/6
  1 response -- 5/6
• Clear over metal   posted by: Kevin -- 5/3
  2 responses -- 5/4
• Pigmented CV   posted by: Mark B -- 5/2
  4 responses -- 5/8
• bronze metallic look finish   posted by: Dan Cook -- 5/2
  6 responses -- 5/4
• green walnut mantle   posted by: dw -- 5/1
  4 responses -- 5/9
• Intentional Finish Flaws/Problems   posted by: Mark B -- 5/1 --  1
  3 responses -- 5/8
• Smaller flatline finishing?   posted by: Matt -- 4/30
  0 responses
• Auto Base Coat   posted by: Jim Clark -- 4/29
  7 responses -- 5/5
• Sanded area on pre finished post   posted by: Russ -- 4/28
  6 responses -- 4/30
• Getting color inside of perforated holes   posted by: Gary -- 4/28
  8 responses -- 5/4
• Metallic finish   posted by: Dan -- 4/27
  4 responses -- 4/30
• HVLP canisters   posted by: Phil Morse -- 4/26
  2 responses -- 4/27
• Steps for Milk paint then Glaze then poly   posted by: Tom -- 4/26
  1 response -- 4/27
• Rub Through   posted by: Jason -- 4/26
  2 responses -- 4/26
• Acrylic enamel or tinted CV   posted by: Luke -- 4/25
  5 responses -- 4/27
• Dust in High Gloss Catalyzed Lacquer   posted by: John DC -- 4/24 --  1
  9 responses -- 8/19
• Matching Dyed Veener--working with Dye stains   posted by: Chris -- 4/24
  3 responses -- 4/25
• Edgebanding   posted by: Ryan -- 4/23
  5 responses -- 4/24
• SW Water White Conversion Varnish VS. Lenmars MegaVar WW CV   posted by: Luke -- 4/23
  7 responses -- 4/30
• walnut stain   posted by: stacoll -- 4/22
  9 responses -- 4/24
• Respirator   posted by: Manu -- 4/21 --  1
  7 responses -- 4/25
• 1st painted kitchen   posted by: Jeremy -- 4/20
  10 responses -- 4/24
• Post over Pre   posted by: Dan -- 4/20 --  1
  6 responses -- 4/24
• Glazing cabinet doors   posted by: Bob -- 4/19
  4 responses -- 4/20
• Glaze base   posted by: Glen -- 4/19
  0 responses
• Stealth or Resistant?   posted by: Dave Edgerton -- 4/18
  2 responses -- 4/18
• Quieter spray booth exhaust fans?   posted by: Matt -- 4/18
  7 responses -- 4/21
• Refinishing a natural lacquer job   posted by: Andy H -- 4/17
  6 responses -- 4/19
• Dye Stain Only   posted by: Vince -- 4/14
  4 responses -- 4/17
• Micro bubbles/pinholes - Kremlin System   posted by: Boyd -- 4/11
  11 responses -- 4/28
• UV Protection   posted by: Neil ANTHONY -- 4/9
  5 responses -- 4/11
• Oak/Ash dye   posted by: lary -- 4/9
  5 responses -- 4/10
• Gun cleaning table?   posted by: Matt -- 4/7 --  1
  3 responses -- 4/9
• Pressure pot spraying. A couple questions.   posted by: LazarusLong -- 4/5 --  1
  22 responses -- 4/9
• Seeking Finisher In Atlanta Area Who Uses A Kremlin 20:25 Pump   posted by: Larry -- 4/5
  4 responses -- 4/11
• air bubbles with Kremlin pump   posted by: Dan collier -- 4/2 --  1
  11 responses -- 4/4
• Color changer valve   posted by: Abrasive -- 3/31 --  1
  4 responses -- 4/4
• Faceframes movement   posted by: Ryan -- 3/30
  5 responses -- 3/31
• Finishing water based finishes   posted by: Justin Lahaie -- 3/26
  10 responses -- 3/31
• sanding   posted by: nicko -- 3/26
  6 responses -- 3/27
• Tinting Sherwood Sealer T67F3   posted by: Vince -- 3/25 --  1
  25 responses -- 3/30
• CAT gun issue   posted by: John B -- 3/23
  5 responses -- 4/7
• RE: Linseed Oil application   posted by: Tommy -- 3/21
  5 responses -- 4/7
• scuffing between coats of CV   posted by: nicko -- 3/19 --  1
  14 responses -- 4/7
• This can't be a common procedure   posted by: Carmine -- 3/18
  5 responses -- 3/19
• Curing waterborne finishes   posted by: Leslie Desnick -- 3/17 --  1
  1 response -- 3/20
• finishing an arched curly maple surface   posted by: jordan mcdowell -- 3/17
  5 responses -- 3/21
• Good airbrush for touchup with conversion varnish?   posted by: Matt -- 3/16
  5 responses -- 3/17
• Managing air and gun hoses in small spraybooth   posted by: Matt -- 3/15
  1 response -- 3/15
• rtm stain system   posted by: Nick -- 3/14
  1 response -- 3/15
• Finishing a maple island top - help please   posted by: henry -- 3/12 --  1
  5 responses -- 3/15
• pigmented cv over raised panel doors   posted by: antonio -- 3/9
  9 responses -- 3/14
• Concerning wormy chestnut...Part 2:   posted by: dash riprock -- 3/7 --  1
  16 responses -- 3/16
• How to tell if WB has frost damage   posted by: Eric -- 3/3
  7 responses -- 3/7
• Staining Ash a uniform toupe color..   posted by: LazarusLong -- 3/3
  2 responses -- 3/6
• white haze on finish   posted by: Nick -- 3/1
  3 responses -- 3/6
• 3M Accuspray   posted by: Mark B -- 3/1 --  2
  5 responses -- 3/6
• Concerning wormy chestnut...   posted by: dash riprock -- 2/28
  15 responses -- 3/6
• RE: Special Wood Color Tints   posted by: Tommy -- 2/28
  0 responses
• Recommend a Good WB Pigmented Product!   posted by: LazarusLong -- 2/28 --  1
  6 responses -- 4/1
• correct primer under pigmented water based Lacquer?   posted by: Robert -- 2/27
  9 responses -- 2/28
• Refinishing   posted by: Patricia King -- 2/27
  3 responses -- 2/28
• Re: First Big Wall-art: residual questions   posted by: David N -- 2/25
  4 responses -- 2/27
• Spraying Existing Kitchen   posted by: Paul S. -- 2/24
  10 responses -- 3/2
• Polyester   posted by: Dan cook -- 2/24
  3 responses -- 2/26
• Conventional vs HVLP   posted by: rob -- 2/23
  12 responses -- 2/25
• bubbles showing up over black stain   posted by: Sam McRae -- 2/23
  4 responses -- 2/24
• Rosewood tabletop trim repair advice.   posted by: Matthew -- 2/23
  3 responses -- 2/23
• Best Finsh for Log Mantel?   posted by: Luke Hagedorn -- 2/22
  5 responses -- 2/26
• looking for a putty with mim shrieking   posted by: john -- 2/17
  13 responses -- 2/24
• Pre-Painted Doors   posted by: Stewart -- 2/17
  1 response -- 2/18
• First Big Wall-art: it cupped...   posted by: David N -- 2/16
  13 responses -- 2/24
• Wood Finishing work   posted by: John -- 2/16
  6 responses -- 3/5
• Pressure Pot to spray waterborne finishes?   posted by: LazarusLong -- 2/16 --  1
  7 responses -- 3/1
• Stains   posted by: Garen -- 2/16
  6 responses -- 2/17
• What to do with waste water...   posted by: kevin -- 2/15
  5 responses -- 2/23
• Cure time for waterborne finishes   posted by: Jeremy -- 2/12 --  2
  9 responses -- 2/17
• White wash with sherwin williams cv system   posted by: antonio -- 2/11
  6 responses -- 2/15
• WTB - General Finishes RTM samples and book   posted by: Bob M -- 2/9
  2 responses -- 2/16
• spray booth   posted by: Jeff -- 2/7 --  1
  31 responses -- 2/14
• Cabinet/ Wood Panel Finisher   posted by: Steve B -- 2/3
  2 responses -- 2/7
• glazing tip   posted by: Dave Edgerton -- 2/2
  4 responses -- 2/3
• Problem with poly finish   posted by: Long Island timberworks -- 2/1
  8 responses -- 2/3
• White to peach color   posted by: Gene Wengert- Wood Doc -- 2/1
  4 responses -- 2/2
• Cerusing with glaze/ does a good water based exist   posted by: Kevin -- 1/31 --  3
  14 responses -- 3/15
• mlc woodsong glaze tips?   posted by: Dave Edgerton -- 1/31
  3 responses -- 2/4
• Cabinets too red... need to go more brown?   posted by: Craig -- 1/30
  6 responses -- 4/30
• lube for WB spray guns?   posted by: Nick -- 1/30
  5 responses -- 2/1
• caulking center panels on doors   posted by: jonathan mahnken -- 1/30 --  1
  4 responses -- 1/31
• Prefinish Panel   posted by: Howard Gorman -- 1/26
  2 responses -- 1/27
• iris finishes   posted by: rescraft -- 1/25
  1 response -- 1/29
• Done with spray stain, option B   posted by: Ryan Groff -- 1/25
  3 responses -- 1/30
• water borne finishes   posted by: Don Dixon -- 1/24
  7 responses -- 1/28
• Sealer under 2k Poly   posted by: Kevin -- 1/24
  6 responses -- 2/19
• green dye   posted by: Tony -- 1/23
  10 responses -- 4/24
• A special exterior wood finishing question   posted by: Robert -- 1/21
  4 responses -- 1/22
• What is the best way to setup for spaying long trim   posted by: Jon D -- 1/20
  3 responses -- 1/21
• Helpful tips to speed up Production   posted by: Jason -- 1/19 --  1
  20 responses -- 2/1
• lenmar megavar   posted by: william -- 1/18
  1 response -- 1/24
• check valve on Binks gun   posted by: thebaus -- 1/18
  1 response -- 1/18
• kremlin 10;1 air assist   posted by: william -- 1/17
  11 responses -- 1/24
• Increasing penetration of oil finishes   posted by: Scott -- 1/15 --  1
  22 responses -- 1/19
• Ml. Campbell in Connecticut   posted by: Eddie -- 1/15 --  1
  5 responses -- 1/19
• The Air Cap from Hell   posted by: Jim Conklin -- 1/14
  3 responses -- 1/19
• Spray stain in corners   posted by: Ryan -- 1/14
  8 responses -- 1/23
• Staining Walnut Veneer over MDF   posted by: John Hartman -- 1/14 --  1
  14 responses -- 1/18
• Solvent   posted by: Richard -- 1/12
  9 responses -- 1/14
• blotchy maple/washcoat   posted by: Ryan Groff -- 1/12 --  1
  2 responses -- 1/12
• Chemcraft   posted by: Denny J -- 1/10
  4 responses -- 1/23
• Finishing Cherry Top   posted by: Chris -- 1/9
  14 responses -- 1/14
• dux spray guns   posted by: John -- 1/9
  5 responses -- 1/19
• finish for aromatic cedar   posted by: Js Woodshop -- 1/9
  9 responses -- 1/16
• help in making clear coats pop   posted by: Bob Higgins-Steele -- 1/6
  1 response -- 1/9
• Kremlin - issues spraying clear after pigmented   posted by: Alessio -- 1/5
  6 responses -- 1/19
• Tannin Bleed on cedar   posted by: Kyle -- 1/5
  2 responses -- 1/10
• Water base finish   posted by: Ron Limpic -- 1/5
  2 responses -- 1/6
• AAA storage   posted by: Dan -- 1/4
  4 responses -- 1/16
• UV cure of shellac?   posted by: Brian Burns -- 1/4
  6 responses -- 1/5
• Cherry with a dark stain   posted by: Jeremy -- 1/3
  11 responses -- 1/8
• Surf Prep System   posted by: scott -- 12/29 --  1
  10 responses -- 3/5
• Matching Chinese Birch   posted by: Tim G -- 12/28
  4 responses -- 12/30
• FOOD SAFE FINISH   posted by: JOHN ALLAN -- 12/28
  2 responses -- 1/4
• Kremlin 04.120 pump   posted by: Scott -- 12/26
  1 response -- 1/3
• wood finish   posted by: jim -- 12/22
  3 responses -- 12/23
• Barrier coat question   posted by: KDBuilds -- 12/21 --  4
  8 responses -- 1/1
• Discoloration   posted by: Stewart -- 12/20
  19 responses -- 1/4
• Removing sharpie from endgrain   posted by: Js Woodshop -- 12/20
  4 responses -- 12/21
• SW CV cleaning recomendations   posted by: Josh Koschak -- 12/20
  4 responses -- 1/24
• Thinning CV   posted by: Ryan -- 12/19
  6 responses -- 1/19
• finishing walnut   posted by: jim -- 12/17
  4 responses -- 1/4
• CV / 2K poly over lacquer wrinkling   posted by: Jim -- 12/17
  6 responses -- 12/19
• Bleaching Walnut   posted by: Hawke -- 12/15
  3 responses -- 12/22
• What ratio aaa pump?   posted by: Ruairi -- 12/14 --  2
  20 responses -- 1/2
• packing material for short lead projects   posted by: Mike -- 12/14
  0 responses
• SW pigmented CV   posted by: Mark B -- 12/13
  2 responses -- 12/14
• Bathroom Finish Choices   posted by: Kevin -- 12/12
  5 responses -- 2/19
• SW Pre-cat   posted by: tom -- 12/12
  1 response -- 12/12
• Need help with small paint jobs   posted by: Andy H -- 12/12
  3 responses -- 12/12
• RE: Hand-applied finish oil   posted by: Tommy -- 12/9
  2 responses -- 12/10
• Briwax 2000   posted by: Howard Gorman -- 12/8
  0 responses
• Best Finish for White Oak?   posted by: Ken -- 12/8
  7 responses -- 9/4
• Kem aqua issue   posted by: John B -- 12/8 --  1
  15 responses -- 1/16
• Lacquer supplier in CT   posted by: CBWW -- 12/7
  7 responses -- 12/13
• face frame movement   posted by: Ryan Groff -- 12/7
  9 responses -- 1/24
• Finish marquetry piece   posted by: Joel -- 12/5
  5 responses -- 12/7
• setting up a new spray shop   posted by: keith -- 11/30
  9 responses -- 12/2
• Client complaint about wood top scratching too easily   posted by: jonathan mahnken -- 11/29 --  3
  24 responses -- 12/13
• finishing dispute   posted by: Norm -- 11/27 --  1
  19 responses -- 12/5
• Large Volume sanding "equipment" advice?   posted by: Jim -- 11/27
  7 responses -- 11/28
• ml campbell ww vinyl sealer   posted by: william miller -- 11/25
  1 response -- 11/26
• Spraying machines. Has anyone considered?   posted by: Bill -- 11/25
  0 responses
• Crazing of polycrylic over shellac primer   posted by: Steven -- 11/22
  12 responses -- 1/5
• Clearcoating maple that has been previously oiled   posted by: Loren -- 11/22
  4 responses -- 11/24
• Light stain for stripped pine woodwork   posted by: Tim -- 11/20
  1 response -- 11/20
• paint gun filter   posted by: Mike -- 11/20
  5 responses -- 11/21
• Painted dining table   posted by: julia -- 11/18
  1 response -- 11/19
• Rub Through Schedule   posted by: Neil ANTHONY -- 11/16
  2 responses -- 11/17
• finishing raw wood   posted by: Charles Earwood -- 11/15
  3 responses -- 11/16
• Finish cabinets in lab   posted by: Mike H -- 11/15
  3 responses -- 11/16
• Spray Booth   posted by: scott -- 11/15
  2 responses -- 11/18
• Water based finish on natural red oak   posted by: Jeremy -- 11/14
  9 responses -- 11/22
• Craftsman finish on 1/4 sawn white oak   posted by: Norm -- 11/14
  10 responses -- 11/14
• White residue in mahogany grain   posted by: Dan cook -- 11/6 --  6
  18 responses -- 3/2
• cedar tannin bleed   posted by: John -- 11/2
  1 response -- 11/2
• Pilling or corns   posted by: Jim -- 11/2 --  1
  1 response -- 11/2
• Oak pores more pronounced   posted by: Richard -- 11/2
  6 responses -- 11/4
• Restaurant table topcoat   posted by: KDBuilds -- 11/1 --  1
  16 responses -- 11/9
• fixing smudges   posted by: stephen -- 10/31
  1 response -- 10/31
• Spray booth size   posted by: chuck crawford -- 10/31
  6 responses -- 11/17
• Eco Steps Coatings (ESC)   posted by: jonathan mahnken -- 10/30
  3 responses -- 11/1
• SW universal primer   posted by: dub -- 10/28
  3 responses -- 11/1
• ilva velvet diamond issues   posted by: the google -- 10/28
  6 responses -- 11/3
• Intake Air   posted by: Kevin -- 10/26
  5 responses -- 10/30
• pigmented waterbourne   posted by: John B -- 10/26
  13 responses -- 11/4
• Air curtain?   posted by: Brian Burns -- 10/25
  1 response -- 10/25
• Which turbine air gun to look at?   posted by: Mark -- 10/24 --  1
  11 responses -- 10/30
• Acetone   posted by: Folz Custom Cabinets (Joe) -- 10/24 --  1
  3 responses -- 10/25
• Reducing sanding time/finishing processes   posted by: Clint -- 10/24 --  1
  4 responses -- 11/9
• Staining Eastern Hemlock   posted by: KEN CULBERTSON -- 10/22
  3 responses -- 10/24
• Strippable booth coating, over already-nasty booth walls   posted by: Matt -- 10/18 --  2
  11 responses -- 1/4
• Re coat window on 2k poly   posted by: Kevin -- 10/15
  2 responses -- 11/5
• temperature and finish   posted by: Gary -- 10/12 --  1
  8 responses -- 10/24
• Dust problem   posted by: MartinB -- 10/11 --  5
  25 responses -- 10/18
• Kremlin 10.14 pump   posted by: Jeremy -- 10/11
  7 responses -- 10/13
• pre treatment for shower screen oak painted with oil finish.   posted by: Robin Horn -- 10/10
  4 responses -- 10/14
• Stain match   posted by: Matthew Johannsen -- 10/10
  4 responses -- 10/24
• Matching needle to nozzle   posted by: Kevin -- 10/8 --  2
  5 responses -- 10/24
• Asturo Eco/SSP Spray Gun Problems   posted by: DanShaf -- 10/7 --  2
  8 responses -- 10/10
• Chemcraft 24 primer and top coat over UV plywood?   posted by: Folz Custom Cabinets (Joe) -- 10/7
  3 responses -- 10/8
• Matching Colour and Finish to an old Mahogany/Sapele Door   posted by: Jammyjoint -- 10/7
  2 responses -- 10/7
• High gloss with staining powder and qualosole   posted by: Michael -- 10/5 --  7
  8 responses -- 10/7
• Cosma   posted by: Ron Stewart -- 10/5
  0 responses
• con var over vinyl edge banding   posted by: dar -- 10/5
  1 response -- 10/7
• Mohawk Piano Lacquer   posted by: DanShafner -- 10/2 --  1
  10 responses -- 10/27
• Making Lacquer Look Like Polyurethane   posted by: Willie -- 10/1
  8 responses -- 10/20
• Spray gun shoots fluid only when trigger first pulled   posted by: Carmine -- 9/30
  3 responses -- 9/30
• Color matching with various stains   posted by: Eric -- 9/30 --  1
  9 responses -- 10/24
• Post cat lacquer issues   posted by: Jay -- 9/30
  9 responses -- 10/24
• Trying to make mahogany look like walnut   posted by: Jarod bradley -- 9/29 --  1
  5 responses -- 10/7
• Mixing Finish Brands   posted by: Kevin -- 9/29
  6 responses -- 9/30
• Honey-like Coat on Teak Solid   posted by: Ian Dixon -- 9/29
  1 response -- 9/30
• Gray Stained Ash   posted by: John -- 9/29
  1 response -- 9/30
• Spraying assembled drawers   posted by: Jeremy -- 9/26
  15 responses -- 9/29
• Vinyl Sealer Pricing   posted by: Willie -- 9/22 --  1
  4 responses -- 10/1
• Finishers in Maryland   posted by: Pete D -- 9/21
  4 responses -- 10/3
• Pigmented CV touch up   posted by: dub -- 9/21
  4 responses -- 9/24
• Re - painting over Conversion Varnish   posted by: D Brown -- 9/20 --  1
  8 responses -- 9/24
• What finish to use on dyed veneer?   posted by: Tim Shelton -- 9/19
  3 responses -- 9/23
• Trying to solve a problem   posted by: Mastercabman -- 9/19 --  1
  17 responses -- 10/24
• MLC Agualente + & Surf Prep Pads   posted by: JoeW -- 9/14
  5 responses -- 9/16
• debris in white cv   posted by: antonio -- 9/14
  7 responses -- 9/19
• Kremlin vs C.A. Tech AAA   posted by: Kevin -- 9/14 --  1
  8 responses -- 12/8
• Kremlin pick up tube filter   posted by: Kevin -- 9/9
  8 responses -- 9/13
• ML Campbell "textured" finish.   posted by: Tim Shelton -- 9/9
  4 responses -- 9/10
• Scuffed bamboo tread   posted by: Rob -- 9/8
  3 responses -- 9/13
• on-site finishing   posted by: Joe -- 9/8 --  1
  1 response -- 9/19
• Looking for advice from the pros   posted by: Adam B -- 9/8
  10 responses -- 10/24
• Seeking advice fixing / filling pin hols in lacquer ?!   posted by: Robert -- 9/8
  9 responses -- 9/12
• Is it possible for nitro lacquer to fail to cure?   posted by: Steven -- 9/7
  2 responses -- 9/8
• Precat over Gel Stain   posted by: Alan -- 9/7
  6 responses -- 9/8
• Water based clear coat too glossy-can I tone it down?   posted by: Justin long -- 9/6
  5 responses -- 1/22
• fine finish + exterior   posted by: Jay -- 9/4
  10 responses -- 9/8
• How many coats hi build pre cat   posted by: Ryan -- 9/2
  4 responses -- 9/4
• Kem Aqua plus Clear   posted by: Mike -- 9/2 --  3
  34 responses -- 9/22
• Semi-gloss urethane gets to glossy   posted by: Dave -- 9/2
  8 responses -- 9/8
• provincial style finish   posted by: Mahdi Taheri -- 9/2
  1 response -- 9/18
• Disposal of booth exhaust filters?   posted by: Marc L. -- 8/31
  5 responses -- 9/6
• inline filter for a low pressure set-up   posted by: nick -- 8/28
  9 responses -- 9/14
• blopentine?   posted by: Al Fortunato -- 8/27
  3 responses -- 8/29
• Lacqure finish cracking over paint   posted by: Justin -- 8/24
  16 responses -- 8/27
• Black Walnut Finishing   posted by: Josh E. -- 8/24
  6 responses -- 8/26
• Grain Filling Mohogany   posted by: Peter Rawlings -- 8/24 --  1
  22 responses -- 9/17
• Shellac on top of wood wax   posted by: Jeff -- 8/23 --  1
  6 responses -- 8/26
• Finish blotch   posted by: Mark B -- 8/22
  4 responses -- 9/17
• Bizarre Marks around hadle holes   posted by: Adam B -- 8/22 --  1
  16 responses -- 8/24
• Antique steel finish?   posted by: Andy -- 8/22
  4 responses -- 8/23
• Curly Maple Mantle piece   posted by: KEN CULBERTSON -- 8/21
  8 responses -- 8/26
• Quickwood RO 800   posted by: Ron Stewart -- 8/21
  0 responses
• Denibber   posted by: Ron Stewart -- 8/20
  6 responses -- 8/22
• Resin seepage in meranti type wood   posted by: Bassist -- 8/20 --  1
  3 responses -- 8/22
• Thinking of opening a spray finish business in San Diego, looking for advi   posted by: Jim -- 8/20
  7 responses -- 8/22
• removing grease and glaze from kitchen doors?   posted by: JeffD -- 8/18 --  2
  8 responses -- 8/22
• Gun Cleaner for cured Agualente Plus   posted by: Charles -- 8/17 --  1
  15 responses -- 10/24
• preventing yellowing in maple   posted by: Derek -- 8/16
  9 responses -- 8/18
• Target Coating Waterborne finishes   posted by: Kevin -- 8/16 --  1
  4 responses -- 8/19
• Matching a Restoration Hardware sample   posted by: Neil ANTHONY -- 8/14
  11 responses -- 9/6
• Pine Floor Finish   posted by: Joe -- 8/12
  10 responses -- 8/16
• Sticky finish on outdoor tables   posted by: David Fryman -- 8/8
  4 responses -- 8/10
• bubbles and extra fine tips   posted by: the google -- 8/3
  14 responses -- 8/8
• Looking for wood finisher giving me a lesson in NYC   posted by: Browning -- 8/2
  7 responses -- 8/6
• need help with ferrous sulfate on weathered pine   posted by: Greg Besso -- 8/2
  6 responses -- 8/4
• Finish Supplier for South Jersey?Philly   posted by: tiptop -- 7/29
  7 responses -- 8/1
• Air compressor recomendation   posted by: Michael Foscone -- 7/26 --  1
  22 responses -- 8/12
• Stainless steel paint hoppers-- safety/spark/static an issue?   posted by: Matt -- 7/25
  2 responses -- 8/6
• hickory table tops   posted by: zedhead2156 -- 7/24
  7 responses -- 7/29
• Painting cabinets   posted by: Chris -- 7/23
  6 responses -- 8/27
• Air filter for finishing room   posted by: Pete D -- 7/22
  16 responses -- 8/29
• sand paper   posted by: Wayne Even -- 7/20 --  1
  20 responses -- 8/16
• Everlast polyurethane from Hood   posted by: Drew Lastra -- 7/20
  4 responses -- 7/24
• Avoiding accidental uncatalyzed finish/varnish disasters   posted by: Matt -- 7/20
  5 responses -- 7/20
• white haze on cedar garage door   posted by: mainzy -- 7/19
  5 responses -- 7/27
• Bar top finish, on a real Bar!   posted by: Michael Horrillo -- 7/19
  3 responses -- 7/19
• Sherwood- cab arcylic   posted by: tom -- 7/18
  7 responses -- 7/21
• Cat AAA H2O and Tip clogging nitemare   posted by: Shawn Lalande -- 7/17
  10 responses -- 7/19
• Pricing paint jobs   posted by: Mastercabman -- 7/17
  5 responses -- 7/24
• Ora Verde Unico   posted by: Sara -- 7/17
  1 response -- 7/18
• CAT AAA waterborne and solvent   posted by: al -- 7/14
  8 responses -- 7/21
• mail order source for exterior 2k poly   posted by: nick -- 7/13
  4 responses -- 7/19
• finishing dining room table   posted by: Ryan Groff -- 7/13
  5 responses -- 7/13
• Gemini Gemvar vs MLC Excalibur   posted by: Feuchts -- 7/11
  3 responses -- 8/12
• Achieving open grain   posted by: Ron -- 7/8
  5 responses -- 7/9
• down draft sanding tables   posted by: nick -- 7/7
  9 responses -- 8/2
• Kem Aqua plus   posted by: Mike -- 7/6 --  1
  5 responses -- 7/12
• How Hard Is This, Really? - Glaze Coat   posted by: Ray -- 7/6
  2 responses -- 7/7
• Finish Room Treats   posted by: John Bishop -- 6/30
  4 responses -- 7/4
• CAT guns   posted by: John Bishop -- 6/30
  5 responses -- 7/2
• Spray Booth Intake Size   posted by: Yusuke Heller -- 6/30 --  2
  10 responses -- 7/14
• What to use to finish PEG Treated Redwood Slices   posted by: Berkshire Products -- 6/30
  0 responses
• Kremlin temperature sensitive?   posted by: Michael Horrillo -- 6/28 --  1
  3 responses -- 6/29
• Spray Booth distance to panel box   posted by: Kevin -- 6/25
  2 responses -- 6/28
• Valspar Zenith problems   posted by: Shawn Lalande -- 6/23
  2 responses -- 7/17
• Finishing AC Plywood   posted by: Gary -- 6/22 --  1
  15 responses -- 6/28
• Applying finish to Oak plywood   posted by: Ricky -- 6/22
  3 responses -- 6/27
• Back in the finishing area with questions   posted by: John Bishop -- 6/21
  6 responses -- 6/29
• Sticky Shellac   posted by: Ken Rosenberg -- 6/21
  2 responses -- 6/21
• Glider black metal arms   posted by: Vern Frier -- 6/20
  3 responses -- 6/20
• To switch finish brands?   posted by: Garen -- 6/16
  5 responses -- 6/21
• Mixing dye in 2k poly?   posted by: Mike Fuson -- 6/13
  20 responses -- 6/20
• EnduroVar Alternatives?   posted by: John -- 6/11
  16 responses -- 6/20
• Finish for finished risers and treads   posted by: Jeremy -- 6/10
  7 responses -- 6/22
• Applying two different finishes on exterior wood door   posted by: AaronV -- 6/9 --  1
  5 responses -- 6/22
• Paint vs. Lacquer   posted by: Tom Miller -- 6/8
  4 responses -- 6/23
• fill between coats pimented varnish   posted by: greg zall -- 6/6
  6 responses -- 8/19
• Auto paint on wood, finished with Sparvarnish   posted by: groarky2001 -- 6/4
  4 responses -- 6/5
• Ready to match stain systems?   posted by: Gavin -- 6/2
  6 responses -- 6/12
• Need to diagnose a finish issue   posted by: J John -- 6/1 --  1
  5 responses -- 6/3
• SHER-WOOD SB STAIN under conversion varnish   posted by: antonio -- 5/30
  1 response -- 5/31
• Flexable coating   posted by: Sam -- 5/30
  3 responses -- 10/24
• Finishing   posted by: Brad -- 5/27
  1 response -- 5/30
• Sealcoat grain filler   posted by: Matt -- 5/24 --  1
  14 responses -- 5/27
• How would you approximate this finish?   posted by: Pat Gilbert -- 5/21
  14 responses -- 5/29
• Coating Compatability   posted by: Robert Chickey -- 5/21
  2 responses -- 5/23
• Veneer Splitting   posted by: Dave -- 5/20 --  1
  1 response -- 5/20
• Re: to stain walnut or not that is the question!   posted by: antonio -- 5/19
  4 responses -- 5/22
• Finsihing Oak   posted by: Joe -- 5/18
  3 responses -- 5/18
• ML Cambell   posted by: gene -- 5/17 --  1
  3 responses -- 5/18
• Pulling the trigger on a AAA rig   posted by: T Logan -- 5/17
  8 responses -- 5/19
• clogging tips in Kremlin guns   posted by: Dan Cook -- 5/17
  2 responses -- 5/17
• Kremlin EOS 10-C18 and WB Kem Aqua   posted by: B Hand -- 5/15
  4 responses -- 6/22
• Ferrara Oak   posted by: Bob -- 5/14
  2 responses -- 5/15
• fan on or off while final coat sets up?   posted by: the google -- 5/13 --  1
  6 responses -- 5/16
• AAA pumps electric or pneumatic   posted by: Joe -- 5/9
  19 responses -- 5/18
• Orange Peel   posted by: Tom Miller -- 5/8
  6 responses -- 6/8
• Safe finish for a bedroom walk in closet/wardrobe - ?   posted by: Ben Nisimov -- 5/5
  3 responses -- 5/10
• Anyone else with MLC's Resistant problems???   posted by: JeffD -- 5/4
  6 responses -- 8/19
• Agualente Plus primer   posted by: Jonathan Mahnken -- 5/4
  27 responses -- 5/17
• high flash Naphtha softens CAB Lacquer   posted by: Jeff-1 -- 5/4
  8 responses -- 5/6
• Help to achieve Grey / Beige Finish   posted by: Matt -- 5/2
  10 responses -- 5/16
• spray booth   posted by: Ryan Groff -- 4/30
  7 responses -- 5/18
• Ageing fir   posted by: Mike -- 4/27
  4 responses -- 5/2
• Recommended Finish for Tops on Red Oak   posted by: Dave -- 4/25
  3 responses -- 7/14
• pricing walnut cabinets   posted by: Ryan Groff -- 4/25
  0 responses
• Helmsman® Spar Urethane   posted by: Richard -- 4/20
  7 responses -- 4/24
• Pricing prefinished trim   posted by: Y. Heller -- 4/19
  17 responses -- 4/27
• White lacquer streaking/dry spray problem   posted by: Steve -- 4/17
  8 responses -- 4/18
• "Specks" in Chemcraft Pigmented Varnish   posted by: Larry -- 4/16 --  1
  4 responses -- 10/24
• Most optically clear finishes   posted by: Y. Heller -- 4/14
  4 responses -- 4/25
• HVLP issues   posted by: David Bach -- 4/14
  7 responses -- 5/19
• Ilva 710 wb   posted by: Joe -- 4/13
  9 responses -- 4/23
• Recommendations for Paint/Stain Dispensing Equipment?   posted by: Dustin -- 4/13
  3 responses -- 5/2
• ML Campbell Aqualente Pigmented Lacquer?   posted by: tom -- 4/10 --  1
  1 response -- 4/10
• the definition of insanity or spring time finish blues   posted by: the google -- 4/10 --  1
  4 responses -- 4/12
• GF Enduro CV Problems on Oak   posted by: Dave -- 4/2 --  1
  10 responses -- 5/21
• Sima Spray booth: semi vs full down draft   posted by: Paula -- 4/1
  4 responses -- 4/12
• water based finish comparisons   posted by: Jason -- 3/31 --  3
  13 responses -- 4/13
• Polyester spray gun options   posted by: abrasive -- 3/30
  10 responses -- 4/11
• Re: Paint or Stain on Wood Products   posted by: Tommy -- 3/28
  3 responses -- 4/20
• dye stain vs spray-only stains   posted by: jimmy cream -- 3/28 --  1
  41 responses -- 5/23
• Material hose for pressure pot   posted by: al -- 3/28
  3 responses -- 3/29
• refinishing cabinets   posted by: Chris -- 3/26
  12 responses -- 4/22
• finish room lighting   posted by: Y. Heller -- 3/25
  7 responses -- 10/24
• Priming Poplar Wood Trim   posted by: Vic -- 3/24
  9 responses -- 3/30
• Aged and checked finish   posted by: Andre -- 3/22
  6 responses -- 3/24
• air increase for kremlin   posted by: Michael Horrillo -- 3/20
  6 responses -- 3/23
• Tinted laq filling shelf pin holes   posted by: Joel -- 3/20
  3 responses -- 3/21
• Spraying masonite   posted by: Kevin -- 3/19
  1 response -- 3/19
• fixing dents in step on site   posted by: Alessio -- 3/18
  5 responses -- 3/20
• Flamible storage Cabinets   posted by: Jim -- 3/17 --  1
  9 responses -- 3/24
• Krystal over resistant ?   posted by: Dan -- 3/16 --  3
  11 responses -- 3/22
• Conversion varnish and linseed oil   posted by: Doug -- 3/16 --  2
  8 responses -- 3/22
• Best Scale for Color Matching   posted by: Jason -- 3/15 --  1
  4 responses -- 3/20
• weathered gray ash- killing me.   posted by: Y. Heller -- 3/15
  13 responses -- 3/22
• Sealer over CV if need to re dye?   posted by: Darren -- 3/13
  1 response -- 3/14
• black glaze supplier   posted by: denny -- 3/12
  8 responses -- 3/22
• pigmented conversion varnish or tinted pre cat   posted by: Ryan Groff -- 3/12 --  1
  16 responses -- 3/21
• Latex Gloves   posted by: Finisher -- 3/9
  4 responses -- 3/26
• advice on nail holes   posted by: Mike -- 3/9
  13 responses -- 3/14
• 2K urethane high gloss process   posted by: dub -- 3/9 --  1
  4 responses -- 3/16
• Spraying UV curable finish   posted by: David Waldmann -- 3/9
  4 responses -- 10/7
• System 12   posted by: AMBA CHARAN -- 3/9
  1 response -- 3/10
• What Size Fan?   posted by: Dave -- 3/8
  11 responses -- 3/10
• DOOR FINISH   posted by: Chris -- 3/7
  9 responses -- 3/31
• pricing of finishing paneledwalls   posted by: Bob -- 3/5
  4 responses -- 3/31
• Spraying milk paint   posted by: bruno -- 3/5
  0 responses
• pinholes distress furniture   posted by: ricklam -- 3/2
  5 responses -- 3/2
• Lacquer Won't Dry   posted by: Willie -- 3/1 --  2
  14 responses -- 3/8
• Discolored halo under clear finish - advise sought   posted by: Gavin -- 3/1
  7 responses -- 3/10
• polyurethane finish is peeling off   posted by: Up north -- 3/1 --  1
  12 responses -- 5/21
• Bullet proof exterior wood coating   posted by: Jeremy -- 2/29 --  1
  12 responses -- 3/4
• Fumed oak fading in light. Any source that confirms this is normal?   posted by: Doug Horgan -- 2/28
  7 responses -- 5/2
• Waterborne veneer bubbling   posted by: Robert -- 2/28
  7 responses -- 3/4
• Kremlin pump   posted by: Joe -- 2/24
  9 responses -- 3/5
• Intermix Stain Systems   posted by: Micah Eckenfels -- 2/22
  2 responses -- 3/4
• stain mixing   posted by: Dave -- 2/19
  9 responses -- 2/24
• Pre-cat over shellac primer   posted by: Mike -- 2/18
  4 responses -- 2/21
• Wide Belt Sander for finishing panels   posted by: Miguel Zeferino -- 2/18 --  1
  15 responses -- 3/17
• Bubbles in paint finish   posted by: Bob -- 2/16
  13 responses -- 2/23
• Thuya Burl finishing   posted by: Jon Anderson -- 2/16
  4 responses -- 2/20
• Oil Enamel   posted by: denny -- 2/15
  5 responses -- 2/16
• Is an ALL-Stainless Steel pressure pot really needed for waterborne???   posted by: Charles -- 2/14
  5 responses -- 5/5
• MLC clawlock   posted by: Ben Whaley -- 2/13
  3 responses -- 2/27
• water separator/dryer/filter recommendations   posted by: JeffM -- 2/12
  7 responses -- 3/15
• Catalyst   posted by: Tim Kelly -- 2/11 --  1
  2 responses -- 2/12
• hairline crack in gloss white fix?   posted by: Robert -- 2/11
  6 responses -- 2/25
• using airbrush for touchups   posted by: Dan Cook -- 2/11
  2 responses -- 2/12
• Cedar bathroom vanity Topcoat   posted by: Robert -- 2/10
  1 response -- 2/11
• How to remove pre-applied oil from wood to get it to accept yellow glue   posted by: tom -- 2/9 --  1
  3 responses -- 2/13
• Durable & flexible finish for chopsticks   posted by: henrya -- 2/8
  2 responses -- 2/13
• Eco Steps finish materials   posted by: dustin orth -- 2/5
  6 responses -- 2/9
• Mystery Discoloration of Doug Fir Veneer   posted by: Phil Haisley -- 2/3 --  6
  31 responses -- 2/29
• MLC's Agualente vs. Agualente Plus   posted by: Charles -- 2/2 --  1
  4 responses -- 2/28
• creating used barn wood   posted by: Scott -- 2/1 --  1
  3 responses -- 2/8
• Water Based Finishes   posted by: Jeremy -- 1/31
  24 responses -- 2/14
• Finishing Sequence - Chalk Paint Kitchen Cabinets   posted by: Ron -- 1/30
  6 responses -- 8/24
• Finishing Paper Backed American Walnut   posted by: Pete -- 1/30
  1 response -- 2/3
• how much for a sqft   posted by: Michael -- 1/26 --  1
  1 response -- 1/27
• tack cloth   posted by: scott -- 1/26
  4 responses -- 2/1
• Fish eyes in Conversion Varnish   posted by: David -- 1/25
  5 responses -- 2/9
• Pewter finish   posted by: tiptop -- 1/25 --  1
  8 responses -- 2/2
• Spray Booth Decisions - New Shop   posted by: Jason Balm -- 1/22
  5 responses -- 2/19
• Sherwood grey laq primer Product #   posted by: Joel -- 1/22
  2 responses -- 1/23
• Most protective wax   posted by: Brian Burns -- 1/21
  2 responses -- 1/24
• mystery finish problems/questions   posted by: the google -- 1/21
  5 responses -- 1/22
• COLOR MIXING CLASSES   posted by: Chris -- 1/21
  3 responses -- 3/2
• Aged Wood Finish?   posted by: Kevin -- 1/20
  9 responses -- 5/2
• filling voids after primer   posted by: scott -- 1/20
  7 responses -- 2/25
• Augalente Plus   posted by: Paul Stover -- 1/19
  4 responses -- 1/22
• is there a way to repair 2k poly?   posted by: the google -- 1/19 --  1
  6 responses -- 1/21
• compatibility question   posted by: Mike -- 1/19
  4 responses -- 1/23
• Fusion Finish??   posted by: Dave -- 1/18 --  2
  10 responses -- 2/16
• S-W finishes   posted by: Mark B -- 1/17
  2 responses -- 1/22
• Premature Finish Failure   posted by: Stewart -- 1/17
  5 responses -- 1/20
• MLC Pigmented Agualente Stacking Issues   posted by: Jason Balm -- 1/16 --  1
  2 responses -- 1/17
• Colron Indian Rosewood Wood Dye   posted by: Alan -- 1/16
  5 responses -- 1/19
• heated make up air in a small shop   posted by: Scott -- 1/14
  9 responses -- 2/10
• Fusion Finish   posted by: Dave -- 1/13
  2 responses -- 1/16
• Yellow stain on Red Gum veneer   posted by: Alan -- 1/12
  1 response -- 1/13
• what can i do to speed drying   posted by: the google -- 1/12 --  1
  7 responses -- 1/16
• White topcoat   posted by: Stefano -- 1/9
  5 responses -- 1/14
• cleaning contaminants before spraying   posted by: pat -- 1/8
  1 response -- 1/10
• 3M Top Coat Rubbing Demo Video?   posted by: Daniel Shafner -- 1/3 --  3
  3 responses -- 2/10
• Pressure pot questions/suggestions   posted by: Bill Richardson -- 1/2 --  2
  10 responses -- 1/12
• corner cupboard doors binding   posted by: jonmcay -- 12/30
  2 responses -- 1/9
• Finishing of redwood tables. Indoor use   posted by: Russ Sitaro -- 12/30
  2 responses -- 12/30
• MLC Polarion and Red Oak   posted by: Leo G -- 12/29
  9 responses -- 5/8
• paint sparayer   posted by: Andrew -- 12/29 --  1
  3 responses -- 1/6
• Qualspray spray guns   posted by: Mike -- 12/29 --  1
  5 responses -- 12/30
• Crackle finish   posted by: Mike -- 12/28
  4 responses -- 1/4
• Trying to find a good recipe for Deft brushable satin   posted by: Mike -- 12/27
  2 responses -- 12/27
• recoat primer or shoot extra top coat?   posted by: alex whitefield -- 12/26
  3 responses -- 12/28
• waterborne primer, anyone use Kilz Max?   posted by: alex whitefield -- 12/26
  7 responses -- 12/28
• finishing heat treated wood   posted by: scott clarkson -- 12/20
  1 response -- 12/20
• refinishing cabinet doors   posted by: Mark -- 12/20 --  1
  14 responses -- 1/17
• Stain Match - 49, Me - 7 - Fourth Quarter, Help!   posted by: Jason Yeager -- 12/20
  4 responses -- 12/24
• finishing suggestions   posted by: jessie -- 12/19 --  1
  2 responses -- 12/20
• Valspar cv not drying   posted by: Kevin -- 12/19
  13 responses -- 12/27
• Accuspray Guns   posted by: John -- 12/19
  9 responses -- 3/17
• Cabinet Door Finishing   posted by: Jason Balm -- 12/17 --  2
  8 responses -- 12/20
• Finishing Question   posted by: Micah Eckenfels -- 12/14 --  1
  2 responses -- 12/17
• chocolate   posted by: Larry -- 12/13
  2 responses -- 12/14
• Smelly finish   posted by: Craig -- 12/11
  6 responses -- 12/12
• Anyone use ML Campbell Aqualente Pigmented Lacquer?   posted by: John -- 12/10
  21 responses -- 2/3
• Polishing dark wood   posted by: Joshua Johnson -- 12/9
  8 responses -- 1/4
• Full finish Kemvar   posted by: Ed -- 12/8
  2 responses -- 12/9
• Polyurethane & warping   posted by: Jly56 -- 12/8
  6 responses -- 12/11
• Permalac clearcoat   posted by: Edi Silva -- 12/7
  2 responses -- 12/7
• Gravity feed gun recomendations   posted by: Tom Gafgen -- 12/6
  6 responses -- 12/30
• Op finish issues   posted by: Michael Greco -- 12/4
  9 responses -- 12/12
• sanding before Amazing Glaze   posted by: Dan -- 12/3 --  2
  5 responses -- 12/7
• Finish End Panels Veneers   posted by: Randy Stone -- 12/2
  5 responses -- 12/6
• General pigmented Enduro over solvent vinyl sealer   posted by: al -- 12/2
  1 response -- 12/2
• Wood finish that keeps wood as natural looking as possible   posted by: Jason Yeager -- 12/1 --  2
  19 responses -- 12/4
• White Conversion Varnish   posted by: Dave -- 11/25
  5 responses -- 11/30
• finishes on mdf veneered and banded mdf kitchen doors.   posted by: Nancy Wallis/Svens Refinishing -- 11/23 --  2
  4 responses -- 11/30
• Need help matching a finish   posted by: Nate -- 11/23
  17 responses -- 12/2
• tiny bubbles in CV   posted by: SCOTT -- 11/21 --  2
  2 responses -- 11/22
• adjusting cabinet color   posted by: Chris -- 11/17
  9 responses -- 11/18
• Sanding MDF for paint   posted by: Louis Brandt -- 11/17 --  1
  27 responses -- 12/31
• Floor Finishing Problems   posted by: jonmcay -- 11/15
  6 responses -- 11/18
• Pickled oak cabinets   posted by: Chris -- 11/14
  3 responses -- 11/16
• african mahogany louver doors   posted by: jim -- 11/13
  12 responses -- 11/14
• Finish recommendation over Fire-retardant   posted by: Keith Newton -- 11/12
  4 responses -- 11/13
• Recreating a look with reclaimed fir   posted by: Mark Newton -- 11/9
  2 responses -- 11/10
• acrylic vs. 2k urethane   posted by: the google -- 11/9 --  2
  7 responses -- 11/9
• Are Sata hvlp guns all that?   posted by: Joel -- 11/6
  6 responses -- 11/8
• Paint booth lights   posted by: al -- 11/3
  5 responses -- 11/6
• pink in white wash   posted by: pj -- 11/3
  6 responses -- 11/6
• Finishing Bamboo Rods   posted by: Montague -- 10/31
  4 responses -- 11/1
• What type of paint for glass?   posted by: tip top -- 10/29
  8 responses -- 12/12
• Question about acrylic   posted by: stan merritt -- 10/27
  3 responses -- 10/31
• Stain Applicator   posted by: Mark B -- 10/27
  6 responses -- 10/31
• SW Conversion Varnish, 2K Poly over Shellac   posted by: Bob J -- 10/26 --  1
  13 responses -- 2/7
• Exterior finish for mahogany   posted by: Alan -- 10/22
  8 responses -- 11/22
• How to achieve this look-Gold/silver   posted by: Cbww -- 10/22
  4 responses -- 10/26
• Polishing CV finish   posted by: scott -- 10/21
  9 responses -- 11/2
• finish edges of new kitchen cabinets   posted by: jim -- 10/20
  4 responses -- 10/31
• Use of Mineral Spirits and/or Linseed Oil as a Temporary Finish   posted by: Tommy -- 10/19
  2 responses -- 10/19
• Dispensing thinners from 5g cans? Hand pumps?   posted by: Matt -- 10/19
  9 responses -- 10/31
• lacquer sheens   posted by: scott -- 10/15
  4 responses -- 10/31
• Refinishing conversion varnish   posted by: Joseph Grove -- 10/13
  2 responses -- 10/31
• glazing   posted by: dar -- 10/13
  3 responses -- 10/14
• Spraying   posted by: Tom king -- 10/13
  2 responses -- 10/13
• Heat resistant finishes   posted by: Bill -- 10/12 --  1
  3 responses -- 10/15
• CV on flex molding   posted by: Wyatt -- 10/12
  7 responses -- 12/18
• Low-tech heated air make up   posted by: Gavin -- 10/11
  9 responses -- 10/12
• BASF Magnapearl   posted by: Phil Hallam -- 10/7
  1 response -- 10/8
• Finish Failure   posted by: Cabinet Shop -- 10/6
  6 responses -- 11/12
• refinishing fiberglass / need help   posted by: JW -- 10/6
  2 responses -- 10/7
• mystery ebonising technique - help please   posted by: Richard Cook -- 10/5
  5 responses -- 10/13
• Gemini stain system   posted by: dustin orth -- 10/4
  1 response -- 10/5
• Outsource finish.   posted by: Antony -- 10/3 --  1
  8 responses -- 10/8
• Finishing a Dining Table Top   posted by: TonyF -- 10/1
  4 responses -- 10/2
• Matching a silver/gold finish   posted by: rich -- 10/1 --  1
  7 responses -- 10/11
• Bamboo finishing   posted by: scott -- 9/30
  5 responses -- 10/2
• Glazing large flat areas   posted by: Kevin -- 9/30 --  1
  19 responses -- 10/10
• Sealing Planter Boxes   posted by: Dave -- 9/28
  7 responses -- 10/2
• Finish Products & Techniques   posted by: Josh -- 9/26
  10 responses -- 9/30
• Tannin Reactive Staining Methods   posted by: Dustin -- 9/26
  2 responses -- 9/27
• Oak grain with solid white f8nish   posted by: Matt Calnen -- 9/22
  6 responses -- 9/25
• General finishes white undercoat   posted by: al -- 9/18
  3 responses -- 9/20
• Using spray-only stains on doors with profiles and projected trim.....   posted by: Matt -- 9/18 --  3
  13 responses -- 12/31
• stripping old paint & saving finish   posted by: jafo -- 9/15
  5 responses -- 9/29
• 0ak cabinet refinishing job   posted by: willgib -- 9/15
  11 responses -- 9/27
• Brushable Lacquer Recipe   posted by: karl -- 9/15
  10 responses -- 9/19
• Woodmode Finish Brand   posted by: Kevin -- 9/15
  0 responses
• Small product, large quantities - finishing cherry   posted by: Ben Aroh -- 9/13
  10 responses -- 11/12
• 3/8 air hose line   posted by: mike -- 9/13 --  1
  11 responses -- 10/9
• ML Campbell euro-blid wetlook   posted by: nick -- 9/11
  9 responses -- 10/3
• Gun cleaning   posted by: Stefano -- 9/10
  4 responses -- 9/11
• Table refinish   posted by: Mike -- 9/9
  8 responses -- 9/11
• Stains Under Rubbed Oil Finish   posted by: Robert Brown -- 9/7
  4 responses -- 9/9
• Varnish dis coloring wood   posted by: Tim -- 9/4
  23 responses -- 9/8
• Kremlin EOS-c18   posted by: Jim Corbet -- 9/3 --  1
  8 responses -- 9/4
• Foaming in a vacuum coater   posted by: Jim Guffey -- 9/1
  2 responses -- 9/2
• Polisher Recommendation   posted by: Howard -- 9/1
  3 responses -- 9/27
• Vinyl Sealer Problems on Mitered Doors   posted by: sean -- 8/31
  2 responses -- 9/2
• Make Up Air   posted by: Nick Cook -- 8/26
  3 responses -- 8/27
• Help with creating finish   posted by: Chris -- 8/25
  4 responses -- 8/27
• How do you work with an open face booth   posted by: Carmine -- 8/25
  12 responses -- 8/26
• Shopping for a spray booth   posted by: BRANDON FILZEN -- 8/24
  1 response -- 8/25
• Aging White Oak   posted by: Kyle Berger -- 8/22
  6 responses -- 9/27
• Real TSP before re coating a front door   posted by: Mike -- 8/21
  6 responses -- 8/25
• conversion varnish   posted by: Dennis Trombetta -- 8/19
  5 responses -- 8/21
• Touch up/ filling holes in Conversion Varnish   posted by: David -- 8/18
  9 responses -- 8/21
• Feed back on "Anest Iwata spray Equipment"   posted by: JP -- 8/17
  2 responses -- 8/17
• Polyester   posted by: Greg Lemmen -- 8/17
  8 responses -- 8/23
• post cat clean up - boogers in top coat   posted by: the google -- 8/15 --  1
  7 responses -- 8/18
• Pressure pot for turbine?   posted by: Gavin -- 8/15
  4 responses -- 10/29
• Exterior finish problem   posted by: Walt Szybowski -- 8/12
  1 response -- 8/14
• exterior finish   posted by: cabinetguy -- 8/11
  13 responses -- 8/17
• Need Tips For orange Peel   posted by: Rob -- 8/11 --  3
  18 responses -- 8/16
• conversion varnish cure failure   posted by: Ken Byrd -- 8/9
  5 responses -- 8/14
• Wipe Finish   posted by: Jim -- 8/4
  2 responses -- 8/4
• quilted maple   posted by: jim russell -- 8/2
  6 responses -- 8/4
• Staining maple   posted by: Tom -- 8/1
  11 responses -- 9/26
• Inside cabinet spray technique   posted by: Bill Richardson -- 8/1
  8 responses -- 8/4
• Water based paints for spraying?   posted by: Bill Miers -- 7/31
  11 responses -- 8/11
• Spray Only Stain and Wood Filler   posted by: Trent Byrne -- 7/30
  16 responses -- 8/18
• filling with polyester?   posted by: nick -- 7/29
  4 responses -- 8/11
• Fiberglass door finishes   posted by: Jeremy Fair -- 7/27
  3 responses -- 7/30
• Bonehead conversion varnish mistake   posted by: Andy -- 7/26 --  3
  10 responses -- 8/18
• GF EnduroVar   posted by: John B -- 7/22 --  1
  18 responses -- 11/16
• Setting up a AAA pump   posted by: Pdub -- 7/20
  2 responses -- 7/22
• Wipe on Polyurethane Finish   posted by: Rich F -- 7/19
  5 responses -- 7/20
• Help! Black spots on Cherry   posted by: Rich F -- 7/19 --  1
  7 responses -- 7/21
• Kitchen and bathroom cabinet/ vanity finishs   posted by: JP -- 7/18
  11 responses -- 11/2
• Dynabrade sanders with 3/8" (aggressive) orbit?   posted by: Matt -- 7/18
  3 responses -- 7/19
• Expensive wooden speaker has ding to lacquer - how to repair?   posted by: joey v -- 7/18 --  3
  25 responses -- 8/5
• Cracking in MagnaKlear   posted by: Terry Stone -- 7/17
  3 responses -- 7/19
• sanding with orbital then block sanding   posted by: scott -- 7/17
  1 response -- 7/17
• sanding techniques   posted by: scott -- 7/17 --  1
  4 responses -- 7/20
• Air compressor   posted by: Stefano -- 7/16
  3 responses -- 7/19
• 8" sander for large painted panels?   posted by: Matt -- 7/15
  9 responses -- 7/24
• Parquetry Flooring finish   posted by: Jerome -- 7/15
  1 response -- 7/15
• Post Cat over Linseed Oil   posted by: Mark Elliiott -- 7/14 --  1
  5 responses -- 7/20
• sap in reclaimed heart pine   posted by: Brian T -- 7/14
  1 response -- 7/20
• Cabinet finishes products   posted by: Gary -- 7/14
  3 responses -- 7/18
• Rosewood finish   posted by: dweaver -- 7/13
  1 response -- 7/14
• Sprayer for stripper   posted by: Ed Arthur -- 7/13
  1 response -- 7/13
• Question, applying stripper   posted by: Jim -- 7/13
  2 responses -- 9/6
• iwata gunsa vs astro ht108   posted by: alex whitefield -- 7/12
  2 responses -- 7/15
• Best technique for mantle piece   posted by: Ken Culbertson -- 7/10 --  1
  13 responses -- 7/13
• Repairing fine scratches in melamine   posted by: Steven -- 7/8
  12 responses -- 8/21
• Black specks on mahagony   posted by: Travis -- 7/7
  4 responses -- 7/16
• Blush Spots   posted by: Jim -- 7/7
  12 responses -- 7/9
• Interior substitute for spar varnish   posted by: Joseph D. Christman -- 7/3
  2 responses -- 7/23
• Exterior grade stain match   posted by: Matthew Thomas -- 7/2
  6 responses -- 7/7
• Lacquer Rippling   posted by: American Pride -- 7/2
  4 responses -- 7/3
• Major problem.....cherry and gray   posted by: Justin h -- 7/1
  8 responses -- 7/18
• CV over pre-primed moulding   posted by: Kevin -- 7/1
  4 responses -- 7/18
• Translucent Nitrocellulose Lacquer/Help Me!   posted by: Kurt Robert Moss -- 6/29
  1 response -- 6/30
• spray booth design   posted by: Jeff Fleisher -- 6/29
  16 responses -- 7/9
• Grey Stain Rags?   posted by: Robert -- 6/29
  0 responses
• Magnamax or Resistant   posted by: Edi Silva -- 6/26
  5 responses -- 7/23
• Clear on copper   posted by: Ed -- 6/25
  9 responses -- 10/5
• refinishing Kitchen cabinets   posted by: Michele K -- 6/24
  5 responses -- 6/25
• Reversing the effects of wood bleach on oak   posted by: robert -- 6/24
  6 responses -- 6/30
• MLC color variances   posted by: Dan/drbwoodworks -- 6/23
  7 responses -- 6/29
• Tip for clawlock and resistant   posted by: Barry -- 6/19
  2 responses -- 6/21
• What is this?   posted by: QC -- 6/19
  6 responses -- 6/19
• tiny specks in clear coat   posted by: Gforce77 -- 6/18
  6 responses -- 6/19
• WB coatings issues   posted by: Dan Collier -- 6/18
  8 responses -- 7/23
• Any issues with this?   posted by: Matt Calnen -- 6/17
  1 response -- 6/18
• 3M PPS-H/O (high output)   posted by: Mark V. -- 6/17 --  1
  25 responses -- 7/28
• how do you get the pink out of alder   posted by: Phil Burruss -- 6/17
  4 responses -- 6/19
• Alcohol dyes on top of Cv?   posted by: Mike -- 6/16
  3 responses -- 6/22
• Water based finish on ranger board MDF   posted by: Jim Miers -- 6/15
  10 responses -- 7/4
• painting on beech   posted by: dave -- 6/15
  0 responses
• Refinishing Polyurethane coated exterior doors   posted by: Michele K -- 6/14
  2 responses -- 8/11
• wearable finish   posted by: msb -- 6/11
  4 responses -- 6/14
• Need to flatten Milesi PU 35 sheen   posted by: Mike -- 6/10
  1 response -- 6/11
• CV worn through   posted by: Matthew Thomas -- 6/9
  1 response -- 6/9
• Production finishing shop in Southern New England   posted by: Edward Forer -- 6/8
  1 response -- 6/9
• New to dye/stain Spraying   posted by: Sean -- 6/7
  2 responses -- 6/8
• Waterborne sealer w/ solvent based topcoat   posted by: Jeff -- 6/5
  9 responses -- 6/7
• contact adhesive, veneer and finishing   posted by: David -- 6/5
  2 responses -- 6/7
• conversion varnish   posted by: Bill -- 6/2 --  1
  2 responses -- 6/4
• Gun Washers   posted by: Rick -- 5/31
  1 response -- 5/31
• Production Finishing of Shaker Boxes   posted by: Rich -- 5/29
  5 responses -- 5/31
• Conestoga wood finish with AAA   posted by: al -- 5/27
  2 responses -- 6/17
• New spray system   posted by: Garen -- 5/27
  9 responses -- 6/17
• Building a spray room   posted by: Jeff fleisher -- 5/27
  3 responses -- 5/30
• Pre-cat VS Post Cat   posted by: Joel -- 5/27
  5 responses -- 5/29
• Measuring small batches   posted by: JohnB -- 5/27
  12 responses -- 6/1
• Kremlin vs CAT   posted by: al -- 5/26
  6 responses -- 5/30
• Kremlin excite   posted by: Mike -- 5/24 --  1
  15 responses -- 5/26
• Curry stains on white Matador CV   posted by: Nathan -- 5/22
  2 responses -- 5/22
• Doing color work at night, is there a special light i could buy ?im   posted by: Mike -- 5/21
  10 responses -- 5/23
• prep for lacquer   posted by: reid -- 5/21
  1 response -- 5/23
• Filling small depressions in a painted surface   posted by: pat -- 5/21 --  1
  3 responses -- 5/21
• filling faceframes for painted cabinets   posted by: Phil Burruss -- 5/20
  3 responses -- 5/20
• finish outsourcing shop   posted by: jake -- 5/19
  1 response -- 5/20
• Using clear lacquer for pigmented aqualente   posted by: alex -- 5/16
  7 responses -- 5/18
• Yet another Minwax adhesion issue   posted by: Eric -- 5/16
  11 responses -- 5/25
• Clawlock II primer problems   posted by: Phil Burruss -- 5/16
  4 responses -- 5/17
• mdf door panels   posted by: pat -- 5/14
  8 responses -- 5/18
• Waterborne pigmented finishes   posted by: JohnB -- 5/13
  7 responses -- 5/24
• expired aqualente   posted by: alex whitefield -- 5/12
  2 responses -- 5/13
• Cracks at the face/door frame joints using SW CV paint   posted by: Phil -- 5/11 --  1
  6 responses -- 5/20
• Airless shop setups that don't cost a fortune?   posted by: Jim Miers -- 5/11
  2 responses -- 5/16
• Klearvar sheen issue   posted by: JohnB -- 5/11
  1 response -- 5/11
• door finish   posted by: GPWOOD -- 5/10
  2 responses -- 5/13
• The fight begins   posted by: sam -- 5/9 --  3
  14 responses -- 5/13
• Bubinga veneer grain filling   posted by: Kyle -- 5/7
  4 responses -- 5/11
• Lenmar Conversion Varnish   posted by: Jim Clark -- 5/7
  2 responses -- 5/11
• 844 colorants source   posted by: Dan Cook -- 5/6
  2 responses -- 7/31
• High Gloss White Sherwin Williams CV   posted by: antonio -- 5/5 --  2
  6 responses -- 5/6
• Thick Finish   posted by: Joe -- 5/3 --  1
  8 responses -- 5/6
• Waterborne   posted by: Zoltan -- 5/3
  9 responses -- 5/14
• M.L. Campbell Krystal Conversion   posted by: jim -- 5/2
  8 responses -- 6/17
• Talking to customer about what to make an outdoor bench out of   posted by: Mike -- 5/2
  3 responses -- 6/1
• being held hostage by paint suppliers   posted by: Phil v -- 5/1 --  1
  8 responses -- 5/20
• Making a white shading lacquer or toner   posted by: Kevin -- 4/30
  9 responses -- 5/6
• Issues with Envirovar?   posted by: Bill Huston -- 4/30
  1 response -- 5/11
• paint pvc trim and beadboard with CV?   posted by: Matt -- 4/27 --  1
  2 responses -- 5/4
• Hvlp gun   posted by: Kevin -- 4/25
  13 responses -- 4/28
• Pre cat over cat   posted by: Nick Cook -- 4/25
  4 responses -- 4/26
• Refinishing reclaimed teak   posted by: Colin -- 4/24
  3 responses -- 5/30
• Handheld Shop Orbital Sanders   posted by: Ken -- 4/23
  2 responses -- 4/26
• RE: Black Molding on Wood   posted by: Ken -- 4/23
  3 responses -- 4/23
• water spots on maple veneer   posted by: Jim -- 4/22
  5 responses -- 4/22
• Finishing   posted by: cabdoctor -- 4/22
  1 response -- 4/22
• Need a good wood filler   posted by: Ted -- 4/21
  7 responses -- 4/26
• TSP   posted by: tom -- 4/21
  6 responses -- 4/21
• Staining to match   posted by: JohnB -- 4/20
  6 responses -- 4/25
• Stealth drying problem   posted by: JohnB -- 4/20 --  1
  9 responses -- 4/22
• Graco Merkur ES 15:1   posted by: Nick -- 4/19
  4 responses -- 5/13
• Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll   posted by: The Staff at WOODWEB -- 4/17
  0 responses
• Sherwin Williams white conversion varnish   posted by: al -- 4/16
  12 responses -- 4/18
• dark brown finish on cherry   posted by: joe -- 4/16
  11 responses -- 6/1
• paint booth   posted by: Gforce77 -- 4/15
  1 response -- 4/15
• glaze with glaze on top, side of extra glaze?   posted by: Kyle -- 4/13
  1 response -- 4/14
• regulator for compressed air for turbine hose   posted by: Dan Cook -- 4/13
  4 responses -- 4/16
• Client wants a brushed finish   posted by: tmak -- 4/11 --  1
  7 responses -- 4/13
• vinyl sealer over wb laquer?   posted by: BDB -- 4/10
  3 responses -- 4/15
• Cleaning Gun after BIN and water born   posted by: alex -- 4/10
  5 responses -- 4/11
• stripper suggestions   posted by: Ethan -- 4/9
  3 responses -- 4/12
• Thinning Valspar Valtech Ultra Pre-Cat   posted by: Jim Conklin -- 4/8
  0 responses
• Kremlin Airmix new but bad?   posted by: Nick Cook -- 4/7
  3 responses -- 4/15
• Fixing dust nibs in opaque finishes   posted by: Kevin -- 4/7
  5 responses -- 4/15
• wire brush machine   posted by: cris -- 4/7 --  1
  2 responses -- 4/7
• Spraying line   posted by: astrit -- 4/5
  4 responses -- 4/10
• Is precat lacquer not tough enough for a heavy use table?   posted by: Vertigoat -- 4/5 --  1
  18 responses -- 4/13
• RE: Removing Wood Stains   posted by: Ken -- 4/4
  2 responses -- 4/5
• black specks in finish   posted by: Gforce77 -- 4/4
  10 responses -- 4/15
• darkening dye   posted by: JeffM -- 4/3
  12 responses -- 4/15
• mineral wood   posted by: Ed -- 4/3
  0 responses
• A trick with steel wool you would never think of   posted by: Mike -- 4/3
  2 responses -- 4/14
• Screwed by SW vinyl sealer   posted by: Joel -- 4/2
  8 responses -- 4/4
• weathering/aging   posted by: Evan -- 4/1
  9 responses -- 5/6
• Latex over post cat primer   posted by: Kevin -- 4/1
  2 responses -- 4/2
• Polishing rubbing machines needed   posted by: Ed Kerry -- 3/31
  2 responses -- 4/1
• moisture meters   posted by: jimmy cream -- 3/31
  4 responses -- 4/14
• Bleaching D-Fir   posted by: Fred -- 3/30
  3 responses -- 4/2
• Fading spots in water-based poly finish   posted by: MJ -- 3/29
  3 responses -- 4/2
• Plagued by lacquer orange peel   posted by: Rich -- 3/27
  26 responses -- 4/4
• rub thru on mdf   posted by: chich -- 3/24
  1 response -- 3/24
• PU waterbased finish on top of oil based stain   posted by: Edison Fernando -- 3/24
  1 response -- 3/26
• Devilbiss air-caps   posted by: jimmy cream -- 3/23
  2 responses -- 3/28
• What are you using to spray water based paints and finishes?   posted by: Tom -- 3/23
  6 responses -- 3/27
• Hindered Amine light stabilizer, where to find.   posted by: Russell Scherer -- 3/23
  2 responses -- 3/25
• HPLV Gun   posted by: Jim -- 3/23
  3 responses -- 3/24
• Thousands of pin holes   posted by: Tom -- 3/23
  3 responses -- 4/3
• Outdoor Tamarack Roof Finish   posted by: Josh Koschak -- 3/23
  0 responses
• Water poly over De-waxed shellac   posted by: marc ta -- 3/22 --  1
  3 responses -- 3/24
• Changing dye color under finish   posted by: Andrew -- 3/22
  11 responses -- 3/25
• Paint buildup on spray nozzle.   posted by: David -- 3/20 --  1
  8 responses -- 3/31
• Stain problem   posted by: Stefano -- 3/19
  6 responses -- 3/23
• Rockhard Varnish Question/Rant   posted by: NH Ken -- 3/19
  9 responses -- 3/21
• Fix for small chips in melamine cabinets   posted by: Rich -- 3/18
  3 responses -- 3/19
• Tannin stains on purpose.   posted by: John Bass -- 3/18
  1 response -- 3/18
• Varnish   posted by: Tim -- 3/16
  2 responses -- 3/18
• Kremlin for home user   posted by: Paul -- 3/14
  7 responses -- 4/3
• water based stain   posted by: chris -- 3/14
  13 responses -- 3/29
• cv over stain with mineral spirits   posted by: nicko -- 3/14
  3 responses -- 3/16
• Oil Paint over Conversion Varnish   posted by: James -- 3/14
  1 response -- 3/14
• Target EM6000   posted by: al -- 3/13
  2 responses -- 3/15
• Lenman Duralaq   posted by: Stefano -- 3/13
  1 response -- 3/14
• Klawlock and Resistant over Medite?   posted by: Finish Room Flunkie -- 3/13
  1 response -- 3/14
• Adding 844 colorant   posted by: Mike -- 3/13
  1 response -- 3/13
• Mdf   posted by: Marci Klein -- 3/12
  0 responses
• Have mohawk stains and dyes changed?   posted by: Mike -- 3/12
  8 responses -- 3/13
• Mixing CV with alcohol based mohawk dye stain   posted by: Mike -- 3/12
  1 response -- 3/12
• Poor Atomization from HVLP turbine   posted by: robert -- 3/9
  12 responses -- 3/14
• striping or shadowing streaks in finish   posted by: christopher silsbee -- 3/8
  14 responses -- 3/16
• spraying post cat.varnish over old lacquer   posted by: Fred Hicks -- 3/5
  2 responses -- 3/6
• Waterbourne over reclaimed material   posted by: Mark B -- 3/4
  2 responses -- 3/8
• System 12 water based polyurethane?   posted by: Bill -- 3/4 --  1
  5 responses -- 3/5
• Kremlin pumps   posted by: CraigM -- 3/4
  9 responses -- 3/13
• WOODWEB Poll: How's Business?   posted by: The Staff at WOODWEB -- 3/4
  0 responses
• Reducer for Verde Chiaro   posted by: Kevin -- 3/3
  4 responses -- 3/9
• Coating over waterlox   posted by: Kevin -- 3/2
  1 response -- 3/5
• removing air from opened 5 gallons of finish   posted by: Jim -- 2/28
  7 responses -- 3/1
• refinishing Ulmia workbench   posted by: Jerry H. -- 2/28
  0 responses
• Water based finishes   posted by: Kyle -- 2/27 --  2
  15 responses -- 4/10
• sprayers/what to buy   posted by: tom -- 2/27 --  1
  4 responses -- 2/28
• Cleaning Solvents and Waterlox   posted by: Kevin -- 2/26
  2 responses -- 3/5
• Satin Finish   posted by: Steven -- 2/25
  11 responses -- 2/28
• finishing wood top debate   posted by: Dan Hueber -- 2/24 --  1
  4 responses -- 2/25
• AAA tip life - waterbased wood coatings   posted by: Stephan -- 2/24 --  2
  7 responses -- 2/26
• Matching old work?   posted by: Evan -- 2/23 --  1
  3 responses -- 2/24
• food safe finishes   posted by: Sam -- 2/23 --  1
  8 responses -- 2/26
• Target coatings pigmented lacquer   posted by: al -- 2/20
  2 responses -- 2/22
• distressing   posted by: chich -- 2/20 --  2
  15 responses -- 3/12
• Finishing Room Size   posted by: Dave -- 2/19 --  2
  8 responses -- 2/23
• Graco airless sprayer   posted by: tom -- 2/18
  5 responses -- 2/20
• Trick i learned today that i want to pass along about getting rid of blotch   posted by: Mike -- 2/18 --  1
  7 responses -- 3/5
• Finish For Cedar Cabinets.   posted by: Joe -- 2/16
  18 responses -- 2/22
• Krystal CV on a exterior table   posted by: K--J -- 2/15
  14 responses -- 2/20
• dye concentrates   posted by: Dan Cook -- 2/15
  5 responses -- 2/17
• re color kitchen cabinets   posted by: tom -- 2/14
  8 responses -- 2/26
• filler after primed   posted by: tom -- 2/13
  7 responses -- 2/17
• Looking to buy a new cup gun for my pps system to spray aniline dyes   posted by: Mike -- 2/12
  5 responses -- 3/6
• sander issues   posted by: Dan -- 2/11 --  1
  14 responses -- 2/17
• Allergic reaction to lacquer thinner   posted by: Dan cook -- 2/10
  9 responses -- 11/7
• white film bleeding   posted by: jim russell -- 2/9
  1 response -- 2/9
• Masking boxes   posted by: chich -- 2/5
  15 responses -- 2/15
• Countertop Finish   posted by: Kevin -- 2/5
  7 responses -- 2/18
• Shop Poll: What Size Is Your Shop?   posted by: The Staff at WOODWEB -- 2/5
  0 responses
• matching new teak to old teak   posted by: Benjamin Wheatley -- 2/5
  6 responses -- 2/16
• Finishing exterior MDF - Extira   posted by: antonio -- 2/4
  11 responses -- 2/18
• Hazy look to Durovar over Level Sealer   posted by: Paul O in Ontario -- 2/3 --  1
  6 responses -- 2/13
• paint application   posted by: Zak -- 2/3
  1 response -- 2/6
• Watco Teak Oil problem   posted by: Stephen -- 2/3
  4 responses -- 2/10
• Spraying Waterlox   posted by: Kevin -- 2/3 --  1
  3 responses -- 3/15
• white paint   posted by: Srefano -- 2/2
  7 responses -- 2/11
• Melisi compared to Ilva   posted by: Mike -- 2/2
  7 responses -- 5/29
• Clear grain filler   posted by: Ed -- 1/31
  2 responses -- 1/31
• Hydrocote White finish   posted by: al -- 1/30
  0 responses
• Finish Color Test   posted by: Troy -- 1/29 --  1
  13 responses -- 2/21
• Latex Spayer   posted by: alex -- 1/29
  1 response -- 1/29
• Spraying waterborne in the winter   posted by: Kevin -- 1/27
  4 responses -- 1/28
• finishing hemlock ceiling with fir glue-lams   posted by: Danny -- 1/27
  1 response -- 1/28
• d-dur   posted by: Dennis -- 1/26 --  1
  1 response -- 1/28
• Binks rapitor AA1500 about 13 yrs old   posted by: Mike -- 1/26
  6 responses -- 1/26
• White conversion varnish on Louver doors   posted by: antonio -- 1/24
  3 responses -- 1/28
• Cheap Airless Rig Finish Quality   posted by: Steven -- 1/24 --  2
  10 responses -- 2/5
• Bananza Draft Blaster for air make-up   posted by: Dan -- 1/24
  7 responses -- 1/25
• Back of face frames   posted by: stan merritt -- 1/23
  2 responses -- 2/4
• Book or DVDs on glazing?   posted by: Mike Fuson -- 1/23
  0 responses
• Rough lacquer   posted by: Tadhg -- 1/20
  4 responses -- 1/21
• Camger 1-175 durability??   posted by: Scott Olsen -- 1/20
  8 responses -- 1/22
• Chemcraft aquprime   posted by: Dan cook -- 1/19
  5 responses -- 1/21
• finishing teak flooring   posted by: t -- 1/19
  1 response -- 3/26
• UV protection coating - secret inscription   posted by: chomin -- 1/19
  4 responses -- 1/20
• black stained maple cabinets   posted by: Bobby Lyons -- 1/18
  10 responses -- 1/23
• Anyone know how to make normal mahogany look like crotch mahog   posted by: Mike -- 1/17
  17 responses -- 3/5
• Anyone use a Dynabug?   posted by: Pdub -- 1/16
  3 responses -- 1/20
• old Graco Turbine unit need advice   posted by: bobby -- 1/15
  1 response -- 1/17
• finishing high moisture content wood   posted by: doug mclaren -- 1/15
  4 responses -- 1/20
• Wire Brushed white/gray oak   posted by: Jarin Smoker -- 1/15
  2 responses -- 1/17
• Finishing pumps and guns   posted by: James Wilson -- 1/14
  9 responses -- 1/29
• Wood Stain Variation Standards   posted by: Ron -- 1/14
  9 responses -- 1/16
• bar top   posted by: liz -- 1/14
  5 responses -- 2/18
• pre finished plywood   posted by: jim russell -- 1/13
  1 response -- 1/13
• Tinted lacquer finish   posted by: Nick Cook -- 1/10
  2 responses -- 1/11
• Spray gun review?   posted by: Jake -- 1/9
  7 responses -- 1/12
• Kremlin/Water Base Primer   posted by: Joe -- 1/7
  5 responses -- 1/19
• WOODWEB Anniversary Poll - 20 years of service   posted by: The Staff at WOODWEB -- 1/7
  1 response -- 2/18
• Rotary polisher   posted by: Mike -- 1/3
  10 responses -- 1/8
• Rifle stock   posted by: Ed -- 12/31
  2 responses -- 1/1
• Finishing Rack For Drawer Fronts   posted by: Matt -- 12/31
  1 response -- 1/3
• HELP - Tung Oil   posted by: Peter Verveniotis -- 12/31
  6 responses -- 1/2
• finishing walnut   posted by: Tyler -- 12/27
  14 responses -- 12/30
• Spray booth   posted by: Stefano -- 12/24
  3 responses -- 12/27
• sanders for high gloss finishes   posted by: jimmy cream -- 12/24
  16 responses -- 12/30
• pneumatic actuated booth fan switches?   posted by: Matt -- 12/24
  2 responses -- 12/25
• Open pored finish   posted by: Kevin -- 12/22
  5 responses -- 12/25
• Bleaching walnut   posted by: Alan Burton -- 12/20
  5 responses -- 12/22
• Clear Wood Filler   posted by: Howard -- 12/14
  1 response -- 12/24
• Para wood   posted by: Nicko -- 12/14
  2 responses -- 12/14
• Fine grit in finish   posted by: Mike -- 12/13
  13 responses -- 1/2
• water based dye and finish question   posted by: Joshua Goldberg -- 12/12
  3 responses -- 12/12
• Clear coat over latex paint   posted by: stan merritt -- 12/11
  8 responses -- 12/14
• Rubbing to dull sheen   posted by: D. John Bishop -- 12/11
  6 responses -- 4/3
• Fiberglass and Aluminum   posted by: Barry Golash -- 12/11
  7 responses -- 12/15
• spray painting edgebanding?   posted by: jim -- 12/10
  4 responses -- 12/14
• Opinions   posted by: Tom -- 12/10
  7 responses -- 12/18
• Help color matching   posted by: Jason -- 12/9
  5 responses -- 12/14
• Rookie question....   posted by: Bill Richardson -- 12/9
  3 responses -- 12/11
• water base stains on figured maple- best?   posted by: Greg Aanes -- 12/8
  11 responses -- 12/16
• finish strainers   posted by: Nicko -- 12/7
  7 responses -- 12/11
• Solid color finishing   posted by: Grovey -- 12/7
  9 responses -- 12/14
• CA Tech Catalyzer   posted by: brian -- 12/5
  5 responses -- 10/18
• Turning Oak Blue   posted by: Jim Lewis -- 12/5
  8 responses -- 12/9
• formaldehyde free anyone ?   posted by: jimmy cream -- 12/3
  3 responses -- 12/7
• Polyacril   posted by: Greg Aanes -- 12/3
  2 responses -- 12/3
• How do you use CAD? ... vote in WOODWEB's latest Poll   posted by: The Staff at WOODWEB -- 12/2
  0 responses
• finishing wood countertop for bathroom vanity   posted by: antonio -- 12/1
  12 responses -- 1/3
• plyboo   posted by: marciklein -- 11/30
  3 responses -- 12/4
• polyerythane   posted by: marciklein -- 11/30
  2 responses -- 12/4
• Graco Falcon "smoothness?"   posted by: jim -- 11/29
  1 response -- 11/29
• precat, cv or 2kP over prefin plywood   posted by: Jake -- 11/28
  9 responses -- 11/30
• Pigmented Pre cat   posted by: Tom -- 11/26
  5 responses -- 11/27
• Static electricity and AAA rigs, is this true?   posted by: Stephan -- 11/25
  3 responses -- 11/28
• Refinishing apartment woodwork - mismatch   posted by: McPetruk -- 11/22
  13 responses -- 12/3
• trying to find a sanding block   posted by: tiptop -- 11/21
  3 responses -- 11/28
• Dynasty/Omega Stain Matching   posted by: D.Morris -- 11/19
  2 responses -- 11/21
• Color matching different species   posted by: Ed Bannon -- 11/19
  6 responses -- 11/21
• Refinishing, filling grain - on site! help!   posted by: Matt -- 11/19
  7 responses -- 11/21
• "Sugaring" using waterbased stain on solid   posted by: zecko -- 11/18
  1 response -- 11/20
• Spar Urethane - Minwax vs. Varathane   posted by: T.J. Burke -- 11/18
  5 responses -- 3/13
• interface pad vs. traditional orbital sanding   posted by: Mike Auger -- 11/18
  0 responses
• strippers   posted by: mastercabman -- 11/17
  3 responses -- 11/17
• sanding/polishing   posted by: Mike Auger -- 11/17
  7 responses -- 11/23
• Still working on an old thread about pinholes, new findings and questions.   posted by: Stephan -- 11/14
  0 responses
• Sanding poly dipped Walnut   posted by: UFPLUKE -- 11/13
  1 response -- 11/17
• Dip finishing Custom signs in Poly   posted by: UFPLUKE -- 11/13
  0 responses
• Touching up paint on site   posted by: Mike Fuson -- 11/12
  12 responses -- 12/1
• Sherwin-Williams tech support   posted by: Ed -- 11/12
  9 responses -- 11/17
• Veteran Finisher's Help Wanted In Georgia   posted by: Larry -- 11/8
  21 responses -- 9/1
• polishing pigmented wb poly   posted by: jonathanmahnken -- 11/7
  10 responses -- 11/13
• Switching to Pre Cat for the winter   posted by: Kevin -- 11/6
  3 responses -- 11/15
• Trying to re-stain birch plywood   posted by: Ken -- 11/6
  5 responses -- 11/11
• Moisture content   posted by: Ed -- 11/6
  6 responses -- 11/11
• UV Finishing of Mouldings   posted by: Mike D. -- 11/6
  0 responses
• Spray Booth Shutdown   posted by: Knick -- 11/6
  8 responses -- 11/7
• High Gloss Lacquer or CV over Oil   posted by: Stewart -- 11/5
  3 responses -- 11/7
• Sanding & finishing slingshots   posted by: Luke Pighetti -- 11/5
  4 responses -- 11/10
• Lacquer Build Up   posted by: Nick Cook -- 11/3
  3 responses -- 11/6
• pressure pot gauges   posted by: jimmy cream -- 11/3
  5 responses -- 11/6
• bamboo ply   posted by: marci -- 11/3
  1 response -- 11/3
• best ext ( semi transparent stain ) for weathered mahogany   posted by: jw -- 11/2
  1 response -- 11/3
• Current best air, random orbit sander?   posted by: Jim -- 11/2
  16 responses -- 3/15
• Reducing prep time   posted by: Dropout -- 10/31
  0 responses
• pigmented pre-cats / post-cats   posted by: jimmy cream -- 10/30
  2 responses -- 10/31
• ML Campbell Waterborne Millwork Primer for Exterior Doors?   posted by: Red -- 10/29
  1 response -- 10/31
• conversion paint   posted by: rusty -- 10/28
  11 responses -- 11/7
• waterborne finish   posted by: Ron Stewart -- 10/26
  6 responses -- 10/26
• how to make this stain   posted by: tom -- 10/25
  8 responses -- 11/12
• I know caulking panels has been hit here but..   posted by: Mark B -- 10/25
  8 responses -- 12/5
• sheen on my natural oil finish   posted by: Dan Dray -- 10/24
  4 responses -- 10/26
• Latex Paint Chemistry Question   posted by: Steven -- 10/24
  14 responses -- 10/26
• New AAA pump   posted by: Folz Cabinet -- 10/24
  11 responses -- 11/2
• waxing green lumber?   posted by: david joseph -- 10/23
  3 responses -- 10/24
• Butcher block top finish   posted by: Dan -- 10/22
  4 responses -- 10/29
• Non-Plastic look Finish   posted by: Brad -- 10/21
  6 responses -- 11/14
• red dots in finish paint   posted by: RC -- 10/21
  1 response -- 6/15
• spraying whites   posted by: Dan -- 10/21
  1 response -- 10/22
• Air-Assisted Airless settings for waterbornes to reduce Micro Bubbles   posted by: Tom -- 10/21
  12 responses -- 11/3
• rules and regs for setting up a finishing booth in shop   posted by: jonathanmahnken -- 10/20
  4 responses -- 10/22
• Problems with C.A. Technologies Spray Tips   posted by: Bill Buck -- 10/17
  4 responses -- 10/21
• Unknown finish.   posted by: Trusty Woods -- 10/17
  7 responses -- 10/21
• spray booth   posted by: jonathan mahnken -- 10/17
  2 responses -- 10/17
• Spray booth/room   posted by: jonathan mahnken -- 10/17
  0 responses
• fluid line   posted by: rusty -- 10/16
  1 response -- 10/16
• stain recoat   posted by: Tom -- 10/15
  1 response -- 10/16
• Kremlin AAA Spray Pump Is Skip Spraying   posted by: Larry -- 10/14
  5 responses -- 10/22
• Staining exterior fibreglass doors   posted by: Dan -- 10/14
  1 response -- 10/15
• Imitating deeply weathered grain on pine?   posted by: Matt -- 10/14
  7 responses -- 10/17
• exterior door stain   posted by: Jason Scott -- 10/12
  1 response -- 10/13
• maple veneer   posted by: rusty -- 10/10
  16 responses -- 10/18
• Precat lacquer over tinted white undercoater changing color   posted by: Al -- 10/10
  5 responses -- 10/13
• What gloves to use with lacquer thinner?   posted by: Charles -- 10/9
  3 responses -- 10/13
• pressure pot set up   posted by: jeff -- 10/9 --  1
  10 responses -- 10/13
• Waterbased surfacer / primer clogging spray gun.   posted by: Stephan -- 10/7
  22 responses -- 11/10
• What to use as an outdoor cedar furniture   posted by: Holly -- 10/6
  2 responses -- 10/7
• Latex   posted by: Tom -- 10/6
  8 responses -- 10/8
• 2k poly   posted by: rusty -- 10/6
  2 responses -- 10/6
• Stanley Craftsman Scotchguard table   posted by: Chris Behr -- 10/4
  0 responses
• Vinyl sealer gumming sandpaper   posted by: Steve -- 10/4
  11 responses -- 10/13
• Spraying General Finishes 350 Exterior ,first time   posted by: Jim -- 10/4
  1 response -- 10/4
• New Finish Line   posted by: Ronald Gingrich -- 10/3
  0 responses
• Still can't get to the bottom of this pinhole issue.   posted by: Stephan -- 9/30 --  3
  75 responses -- 2/21
• How to Coat Pigmented H20 over Solvent CV   posted by: RobertJ -- 9/28
  3 responses -- 10/2
• tinted CV   posted by: jimmy cream -- 9/26
  18 responses -- 10/1
• Glazing painted cabinets   posted by: Mike Fuson -- 9/26
  13 responses -- 10/3
• How to make white oak Black before liming/cerusing.   posted by: Mark Newton -- 9/26
  7 responses -- 10/4
• CCI & Gemini?   posted by: Terry -- 9/26
  5 responses -- 12/2
• Chemcraft Chemlife 24 pricing   posted by: Gerry -- 9/26
  5 responses -- 1/25
• Bleached walnut   posted by: Mike -- 9/25
  3 responses -- 10/2
• Strip Wax   posted by: karl -- 9/25
  7 responses -- 10/1
• Air Assisted Airless   posted by: Dennis -- 9/24
  3 responses -- 9/24
• Topcoat releasing   posted by: rusty -- 9/24
  6 responses -- 10/1
• fish eyes   posted by: pat -- 9/23
  6 responses -- 10/1
• application position   posted by: jso -- 9/22
  5 responses -- 9/25
• drying racks   posted by: jso -- 9/22
  3 responses -- 10/6