Total Finishing Supplies

Professional Finishing

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Recommendations on Hardwax oil finish on Millwork, Furniture and cabinetry

5/12/20       
Scott Member

I am looking for a natural Hardwax oil finish that can be applied by hand (rag, etc) on millwork, furniture, and cabinetry. Any recommendations from people who have EXPERIENCE using one? Monocoat? Woca? Osmo? Pallman? other?

I am doing a Tatami room in VG Hemlock for a client and want a natural finish that offers some protection to the wood but leaves that natural, matte/satin finish that almost looks raw and unfinished.

BTW, I am well aware of spray finishes and their advantages (and disadvantages) so please keep this thread 100% focused on responses by people sharing their experience using a hardwax oil finish.

5/12/20       #2: Recommendations on Hardwax oil fini ...
mauricio poli Member

If you are looking for natural appearence, you have to use water based finishing.
Why do not try a natural WB finish?

5/12/20       #3: Recommendations on Hardwax oil fini ...
rich c.

mauricio poli,
you didn't follow his last rule to replying! LOL He only wants 100% discussion on hardwax oil experiences.

5/13/20       #4: Recommendations on Hardwax oil fini ...
DannyB

Hey Scott,

About half of the companies you listed produce standard wax + oil products (with nothing else) and market them as "hardwax oil", but these are generally not considered suitable for professional finishing at all.

The other half are mostly marketing hand-appliable urethanes as "hardwax oil"

It's interesting that apparently whatever a "hardwax oil" is runs the gamut from "paraffin wax" to "urethane polymer".

You also keep repeating the word "natural" - if you want bare-to-wood looking finishes, there are lots of options and i wouldn't limit myself to some particular marketing term, but instead try to understand what i want out of it - what is the level of chemical resistance, abrasion resistance, etc.

Personally, I would start by selling my clients on the look rather than the marketing of random companies of their finishing products.

They are all just tools in the toolbelt, not a way of life.

5/13/20       #5: Recommendations on Hardwax oil fini ...
Todd

I have used both Osmo and Rubio Monocoat on furniture. My experience has shown that for me the Osmo is a better product. The Osmo has better sheen options and needs less maintenance. The Osmo requires more coats so more labor. You need to educate your clients on maintenance of either of these products. I have found that Osmo service is professional and prompt.

5/13/20       #6: Recommendations on Hardwax oil fini ...
scott brady

We have used Watco liquid natural wax for a smooth to touch finish. It takes at least 5 coats with 24 hours between coats, water will bead up on the surface. We have installed 7 projects in the same house with this finish schedule over 5 years. The Kitchen still looks just as good as the day we installed it. I'm sure at some time it will need a re coat but all you need to do is brush a coat on and wipe off to a light rub out.

5/14/20       #7: Recommendations on Hardwax oil fini ...
Scott Member

Thanks Todd, Scott B, Mauricio
Todd,- how do you apply the Osmo, and which product do you use? Do you rag it on wet, leave it for how long? Then wipe off "dry"?

Mauricio we've done oil finishes for years and we like the look and feel of the grain of hand-rubbed oils. Like an old antique. I think the WB you are talking about is probably sprayed? Not the look we are after.

To the others... The finishes I'm asking about are commercial ones that are used extensively in Europe, and to a growing degree in the US, for the very demanding application of flooring, including in intense environments like restaurants.

I'm just looking to hear the experience of guys using these a bit off-label on furniture and millwork.

thanks all! Always fun to learn new ways of doing things. Isn't it great we all get to make beautiful things in wood?

5/14/20       #8: Recommendations on Hardwax oil fini ...
Todd

Depending on the material and surface prep we have applied Osmo with a rag, brush and spray. I suggest you contact Midwest Flooring. They are a retailer of Osmo and are very knowledgeable on the Osmo line of products.

5/14/20       #9: Recommendations on Hardwax oil fini ...
rich c.

Scott, you make me chuckle each post. Your posts read like advertisements. "The finishes I'm asking about are commercial ones that are used extensively in Europe, and to a growing degree in the US, for the very demanding application of flooring, including in intense environments like restaurants. For someone that has never used them, you sure are in love with them! LOL That growing degree here in America doesn't seem to be too wide spread on this forum.

5/14/20       #10: Recommendations on Hardwax oil fini ...
mauricio poli Member

Hi Rich !
I am sorry, I just wanted to help.

5/15/20       #11: Recommendations on Hardwax oil fini ...
Michael Sanders Member

I used Pallmann magic oil on some curly maple flooring and maple cabinets I installed in my home. Did it as an experiment, wouldn't do it for an actual customer. We have been pleased with the results. The finish has held up surprisingly well after 6 years. It is a real pain to apply. If i remember correctly, you had to start buffing the stuff off within about 15 mins of applying it. The recommended tool for applying it to the floor was a trowel or squeegee. Not ideal for anything other than a flat surface. If you wait to long before you start buffing it turns into a tacky nightmare. A power buffer is recommended over a rag.
I would use the stuff on floors again any day. It has held up well to kids and a dog, and looks nice. Allegedly, you can do spot touch ups, but I haven't had the need to try yet. If I did the cabinets again I would just spray them with dull Krystal and call it a day. A lot less effort for a very similar look, at least on maple.. My two cents.

5/15/20       #12: Recommendations on Hardwax oil fini ...
Daniel Berlin Member

So i acquired a bit of this stuff to test yesterday.

Not surprisingly, it *is* in fact just a urethane with random stuff added.

It will hold up as well as a urethane.
It will be as easy to apply as a hand-applicable urethane.
It will be as easy to touch up as a urethane
etc

5/17/20       #13: Recommendations on Hardwax oil fini ...
Scott Member

To Chuckles, I mean Rich C, I'm glad I could make you laugh. It's good to laugh a little in hard times.

I try to base my confidence on data and the experience of others. I came to this forum knowing it was not a flooring forum but general woodworking finishing forum but hoping to hear some data points from people who had actually tried it, not just arm-chair critics.

Thanks to those of you who have tried the product on off-label use of cabinets and millwork. Good information!

What got me interested in these "hard-wax oil finishes at all was reading the blog of a flooring installer in the broader Chicago area who uses all kinds of finishes including Pallman and Rubio Monocoat. As of 4 years ago he had done over 50 floors with Pallman and about the same with Rubio and he and his customers have been very satisfied, including in some heavy traffic commercial applications. This is a guy who has done even more flooring with other waterborne finishes, and with traditional urethane finishes so I was quite intrigued by his experience. He found these newer finishes as vastly superior to traditional Urethane. Check out his blog - I gave it either above or on the related thread here in finishing.

Thanks again everyone for sharing your experience!

And Chuckles, I have used oil finishes for 30 years, mostly UV cured wax-oil finishes out of Sweden. I just don't have experience with these air-dry finishes and I'm trying to learn. We have a high-intensity UV lamp tunnel that we run our doors, flooring and millwork thru after hand-rubbing the UV oils. Not a finish for every one, but it has given us a look and feel our customers like.

5/17/20       #14: Recommendations on Hardwax oil fini ...
mauricio poli Member

Hi Scott!
I get very interested to learn more about that you comment, the uv oil...
I have few questions, hope you can answer:
1 - is it a toxic material? I mean, if you rub this material, is it a dangerous material? How it smells? Bad ? Because all the UV material I knew were dangerous to manipulate..
2 - when you apply this uv oil you need to evaporate something before pass under the uv lamp?
3 - can you tell us where do you buy it? or the brand, contacts?
4 - do you believe it can be used to seal panels and parts, and after the furniture assembly I can spray regular lacquer?
Thank you very much to share your knowledge with us.
Have a good day

5/18/20       #15: Recommendations on Hardwax oil fini ...
Scott Member

Mauricio,
The product was developed by Becker Acroma in Sweden maybe 10-15 years ago for the industrial coatings market. Then around 5 years ago Sherwin Williams bought them out.

The product is GX1540. It is not a nasty smelling finish, oil-wax smell. It does take a special high-intensity UV tunnel to use. We have used it in our factory in China for 8 years and really like it (we mostly take American hardwoods - Walnut, Cherry, White Oak and do complete interiors for Luxury Chinese homes). You cannot cure it properly without a UV tunnel.

Coatings companies are now developing LED cured coatings for industry. Not sure if anyone has a LED cured wax-oil yet.

We would usually do two coats of this UV oil, then a top coat of hand-rubbed polymerized tung oil. Looks and feels like a beautiful old antique.

We would hand apply with rags or short brush applicator, then rub off with rags until it felt smooth and dry, then you can immediately run thru the UV, no need to let it dry. Very little solvent in it. Not dangerous.

Not sure if you could shoot a laquer over the top or not. We never spray finishes.

5/20/20       #16: Recommendations on Hardwax oil fini ...
JeffA

Scott,
I wasn't going to comment on this thread until I read that you said the UV stain isn't dangerous. I'm going to beg to differ. I have dealt with UV coatings whether 100% solids or WB spray and I will tell you anything that needs to be cured with radiation or UV light will have a photoinitiator in it. It is the product that needs radiation or UV light to absorb so it can cause the resin to cure. And photoinitiator is a very reactive product. The reason you don't spray it is because if this gets into your lungs it can easily disable you or worse. If your skin absorbs it which is easy to do and you then go out into the sunlight, it can cause 3 degree burns. So to say it's not dangerous is a very 'dangerous' thing to say in my opinion.
Sorry for the lecture but unfortunately I have witnessed too many injuries from using UV cured products.

5/21/20       #17: Recommendations on Hardwax oil fini ...
Scott Member

Jeff,
Thanks for the caution. I'll look again. You can check with Sherwin Williams' MSDS on GX1540. I don't think it is like the typical UV cured finishes.

5/22/20       #18: Recommendations on Hardwax oil fini ...
mauricio poli Member

Thank you very much Scott.
I could find information in SW page
It is interisting, but needs a good uv lamp, asks 800 mJ/cm2, it is a lot of uv light.
Anyway, very interisting.



Click the link below to download the file included with this post.

Flooring._Product_Selection_Guide._Visit.pdf

7/6/23       #19: Recommendations on Hardwax oil fini ...
michaelarrington

Website: https://autistictest.com

A common option for a natural, matte finish is Rubio Monocoat. It is a single-coat method that improves the wood's natural beauty while offering exceptional protection. It is renowned for its durability and is available in a variety of hues.

8/21/23       #20: Recommendations on Hardwax oil fini ...
immaculate grid Member

Rubio Monocoat is known for its easy application and the ability to achieve a natural, matte finish. It's a one-coat system that provides excellent color depth and protection. It's important to note that despite its name, it's not a traditional "wax" but a unique oil that bonds with wood fibers.


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
    Sponsors
    • SAMES North America Corporation
      Precision Spraying Solutions From Pumps To Complete Application Systems-Design and Manufacture of Process Equipment Including Airspray, Airmix, Airless, Rexson Dispense, Electrostatic and Powder Coat
    • Unique Machine & Tool
      Industrial Machinery for Door and Drawer Production
    • TotalFinishingSUPPLIES.com
      Solutions and supplies from spray tips to spray booths for all your woodworking needs
    • Carter Products
      Band Saw Guides, Blades, Wheels, Tires, Line Lasers and 2D Projectors, Wide Belt Sanding Accessories, Vacuum Holding Systems and More
    • EX-FACTORY INC.
      Offering New & Used Woodworking Machinery including Auctions & Liquidations
    • Supergrit Abrasives
      Industrial Quality Abrasives Manufactured by Leading US and Foreign Companies
    • Simantech
      New & Used Machinery, Supplies, Tooling, Parts, and Abrasive Products

    Become a Sponsor today!