|Home » Forums » Professional Furniture Making » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
I am looking some advice on veneering birch plywood - should I run the grain of the plywood Perpendicular to the veneer grain or will it make much difference?
Yes, each ply must oppose the previous ply at a 90 degree angle, or perpendicular. If not, you will have a very twisted/warped panel.
Many thanks - just what I had thought.
Not such a big deal if you are using paper-backed veneer. If you are using any kind of sheet "veneer" check the backing.
the angle difference between two must be of 90 degree