Cabinet and Millwork Installation

You are not logged in. [ Login ] Why log in
(NOTE: Login is not required to post)

Wall mounted closet

9/12/12       
Jordan

I am trying to design a wall mounted closet for my room. I have thick carpets that I don't want to cut away for anything standing. Below is a picture of sort of what I want to do. The only thing is, I don't know how this was installed. Are the shelf dividers attached only to the cleats on the wall? Is there some way to hang these divider boards on the stud itself. I don't see any hardware like an L bracket on these boards. What is the best way to approach this?

Thanks in advance for your help.


View larger image

9/12/12       #2: Wall mounted closet ...
mastercabman

Looks to me that those vertical pieces holds most of the weight.look at the bottom at the wall.Then it is secured at the top with cleats.
All of the shelves are problably dado into those vertical piece.

Looks like Gary katz in that picture!!!!!
If it's him,i would simply just ask him how he did it!

9/12/12       #3: Wall mounted closet ...
mastercabman

Looking at the pic again,i think the shelves are held by cleats,not by dados?

9/14/12       #4: Wall mounted closet ...
eddie

If you don't want anything on the floor for support. (The pic looks as if the verticals are on the floor.) Use one of the hanging rail support systems.

9/14/12       #5: Wall mounted closet ...
chich

Just a guess. Id say from the picture this unit is 48" wide or maybe 64" wide because of the angle given. In that case they make a small piece of hardware that would be mortised into the back of the 3/4" uprights and hung on a screw that would be fastened to the studs on the wall. Unfortunately I dont know the name of this inexpensive piece of hardware but hopefully these other experts on here can enlighten you

9/17/12       #6: Wall mounted closet ...
Bruce H

you might want to try Fine Woodworking. com, their ask and answer website would be more suited to your question.

9/17/12       #7: Wall mounted closet ...
wmsuber

Jordan, we hang a good many wall mounted closets using horizontal cleats. These are usually the same material used for shelves and verticles, cut 3/4" x 3 1/2 or 4" and the same length as the shelf they will be under. We apply at least 1 in every section, hope for 2 per section and will apply 3 if possible. To get the best fit and appearance, we cut these along with the shelves. We screw this to the shelf they will be under, and when possible, will screw thru the verticle into the end of the cleat. They may not sound like they will be strong, but they are. By using cleats in every section, you will be attaching into every stud that is behind your unit, often in a high and a low area. It is usually only in a shelf stack or a shoe stack where you can use 3 cleats in the one section. Also since they are screwed to the wall, pick only fixed shelves to screw to.

9/17/12       #8: Wall mounted closet ...
Jordan

Thanks for the responses I think I have a good idea how I'm going to do this.

Thanks again.

10/18/12       #9: Wall mounted closet ...
jason holtz

I've hung closets with a top and bottom mounted cleat like in the photo. You can hit studs where possible, and we use these anchors where there's not a stud

strap toggles

7/4/13       #10: Wall mounted closet ...
steven Member

As a trim carpenter I've built countless closets using that same method. No need for any fancy hardware or even for the dividers to rest on the floor or be over a stud. All eight of those wall cleats are probably nailed into a couple of studs. Dividers were then nailed to probably all the wall cleats. Side cleats were then glued and brad nailed into the dividers. Shelves were then put in an nailed off to wall and side cleats and possibly through side of dividers into shelves if they wanted to go crazy with the nails. Everything would then be tied together and pretty rock solid. I highly doubt even Gary Katz would dado those shelves in; there just for shoes, sweaters, etc. and doing a closet like that doesn't exactly call for any special joinery. That's what the cleats are for.


Post a Response
  • Notify me of responses to this thread
  • Subscribe to email updates on this Forum
  • To receive email notification of additions to this forum thread,
    enter your name and email address, and then click the
    "Keep Me Posted" button below.

    Please Note: If you have posted a message or response,
    do not submit this request ... you are already signed up
    to receive notification!

    Your Name:
    E-Mail Address:
    Enter the correct numbers into the field below:
     

    Date of your Birth:



    Return to top of page

    Buy & Sell Exchanges | Forums | Galleries | Site Map

    FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)

  • WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
  • Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
  • A valid email return address must be included with each message.
  • Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
  • Subject lines may be edited for length and clarity.
  • "Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
  • Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
  • Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
  • Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
  • Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
  • Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
  • Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
  • Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
    (return to top).

    Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.

    You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.

    WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.

    Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).

    Libel:   Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.

    Improper Decorum:   Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).

    Advertising:   The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).

    Repeated Forum Abuse: Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.

    There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).

    The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)


  • Forum Posting Help
    Your Name The name you enter in this field will be the name that appears with your post or response (return to form).
    Your Website Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
    E-Mail Address Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
    Subject Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
    Thread Related Link and Image Guidelines Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
    Thread Related File Uploads Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .MP4 (Image Upload Tips)   If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)