|Home » Forums » Cabinet and Millwork Installation » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Tilt out hamper stay issue9/6
After several attempts, I'm about out of hair. I can't get the door to keep from slamming shut
Yes, i have tried the set screw, even followed the directions bon placement, but with a tilt out, it's obviously not exactly the same since the door only tilts out so far. I'm using a closet system i had manufactured for me, all based on a 32mm hole pattern. Can anyone lead me to reasoning as to why it's still slamming shut?
Try using " Free Swing" or "Soft Closer" hinges not self closers this might help to stop the slamming closed problem.
Dave, I believe DUH comes to mind. Omg, i can't believe i didnt think of that! Thx!!
I'm use to blum and these are Salice. Would you mind providing a link to the appropriate half overlay free swinging hinge?
Here are the part numbers for the Salice free swing and the soft close.
The mounting plate in your photo is:
I'm not really familiar with the closer in your photo but would tend to agree with Dave that one of these two hinges might be your solution.
Another solution might be to use a Smove, soft close piston at the bottom (mounted on the side of the cabinet). The tension of the Smove is adjustable. Here are 2 Smoves and the part numbers. One is for normal weight doors, the other for heavier doors.