|Home » Forums » Laminating and Solid Surfacing » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
seaming clamps for solid surface2/6
What is the best or recommended air or vacuum operated "automatic" seaming clamps for solid surface? Our stone sub uses one on the job site that apparently works great - it clamps down on both sides of the stone joint and then pulls them together while aligning the seam. Works off a small air compressor. We're asking him what brand / where did he get it.
We want to get one for the solid surface (e.g. Corian) seams we do in the shop and also that can be taken out to the job site.
What brand or system do you suggest?
parallign seam clamp
I was just looking at the Pinske air operated seaming clamps, trying to talk the boss into them.