WOODWEB's Sawing and Drying Forum

Fumigating Wood posted by: Chad -- 2/5
1 response -- 2/5

stickers posted by: madeofwood -- 2/5
2 responses -- 2/5

End of cycle Nyle kiln question posted by: Kelvin Potter -- 2/5
3 responses -- 2/5

Corrugated Clear Roofing from Lowes Cracking - Better Solar Kiln Roof? posted by: Nick -- 2/4
8 responses -- 2/6

Wood Stacking posted by: Bill -- 2/3
3 responses -- 2/4

Nyle 200 kiln building size posted by: Bri Hart -- 2/2
2 responses -- 2/3

red cedar posted by: jen -- 2/1
2 responses -- 2/2

How to acclimate tropical woods posted by: Steve -- 1/29
3 responses -- 1/31

Season for cutting posted by: John B -- 1/29
5 responses -- 2/5

Drying wood cylinders posted by: Ken Dickson -- 1/29
2 responses -- 2/1

eastern hemlock for post & beam posted by: Jera Anderson -- 1/29
6 responses -- 1/30

pitch pine interior flooring (pinus rigida) posted by: jer -- 1/29
0 responses

solar kiln posted by: sam -- 1/26
5 responses -- 1/28

Sawing book? posted by: jim schneider -- 1/24
2 responses -- 1/26

Bugs (PP?) in wood. posted by: Ethan -- 1/19
2 responses -- 1/20

Treating wood to be airdried for PP Beetle posted by: Jeff -- 1/19
6 responses -- 1/22

Current Rate on Kiln Drying Lumber posted by: Woodey -- 1/18
11 responses -- 1/29

inconsistent moisture issue posted by: ryan -- 1/18
2 responses -- 1/19

dehumidifier kiln posted by: Ray -- 1/17
8 responses -- 1/21

Keeping Kiln-dried Lumber dry w/Dehumidifier posted by: SG -- 1/16
7 responses -- 1/22

When to use the pith/center? posted by: Dan -- 1/16
6 responses -- 1/20

Heat treating/setting pitch posted by: SteveB -- 1/16
1 response -- 1/16

What happened to this Maple ? posted by: Frank W -- 1/12
5 responses -- 1/15

walnut lumber thickness posted by: sam -- 1/11
9 responses -- 1/12

walnut posted by: ryan -- 1/11
3 responses -- 1/11

uses for poplar lumber posted by: sam -- 1/10
3 responses -- 1/11

DH kiln construction posted by: Merritt Newman -- 1/8
2 responses -- 1/8

Locating parts for Timber Champ saw mill posted by: Harlan -- 1/8
1 response -- 1/9

cracks posted by: ryan -- 1/5
2 responses -- 1/6

sticker question posted by: Ricky -- 1/5
1 response -- 1/5

Tree on the ground posted by: Andy -- 1/4
19 responses -- 1/13

Sticker Stain posted by: GB -- 1/4
3 responses -- 1/17

Gann kiln control Help posted by: Robert White -- 1/4
3 responses -- 1/6

Certification posted by: Eric -- 1/1
2 responses -- 1/5

Picking the right saw posted by: Stephen Rideout -- 1/1
4 responses -- 1/2

whats a fair price? posted by: nate -- 12/31
3 responses -- 1/2

air drying cherry and butternut thin slices posted by: John B -- 12/31
6 responses -- 1/2

Is vacuum dried wood stronger? posted by: Gene Wengert-Wood Doc -- 12/31
12 responses -- 2/1

Thanx Doctor Wengert posted by: Brian -- 12/28
6 responses -- 12/29

Question for the Wood Dr. posted by: Brian -- 12/27
5 responses -- 12/28

Do you need to condition air dried lumber after kiln drying? posted by: Kelvin Potter -- 12/24
2 responses -- 12/24

PLEASE HELP! posted by: Rob -- 12/22
4 responses -- 12/23

heat treating lumber to kill insects posted by: Martin -- 12/22
4 responses -- 12/23

Redwood wafers posted by: Jonas -- 12/20
1 response -- 12/21

does freezing or vacuming kills PPB posted by: Martin -- 12/19
1 response -- 12/19

stickers posted by: rob -- 12/16
2 responses -- 12/20

Kiln Drying Workshop - Jan 9-12, 2012 - Syracuse posted by: Bill Smith -- 12/15
1 response -- 12/20

air drying silver maple posted by: Carol Anderson -- 12/14
16 responses -- 12/18

kiln temps for overseas shipping... posted by: Troy Frazier -- 12/14
1 response -- 12/15

36" dia maple cookies posted by: Dennis J Hoover -- 12/14
6 responses -- 12/23

Lumber has bent on stickers, too bad? posted by: Kelvin Potter -- 12/10
4 responses -- 12/18

suction line posted by: Robert -- 12/10
1 response -- 12/11

eastern South Carolina plywood dealers posted by: Bill Colligan -- 12/8
2 responses -- 12/8

Portable saw mill posted by: Bill Slack -- 12/7
10 responses -- 12/9

cold weather operation posted by: Billy -- 12/5
4 responses -- 12/8

wood ID Mahogany posted by: chris -- 12/5
4 responses -- 12/11

Incomac kiln posted by: Robert -- 12/2
5 responses -- 12/3

Different moisture posted by: Robert -- 11/29
3 responses -- 11/30

Has buried metal ever ruined your day? Win a Lumber Wizard 4 metal detector ... posted by: The Staff at WOODWEB -- 11/29
16 responses -- 1/17

Kawasaki Engine on Woodmizer mill ?? posted by: Pinenot -- 11/26
2 responses -- 12/4

Sawdust and mortar posted by: Gene Wengert-WoodDoc -- 11/23
3 responses -- 12/18

pallet sterilaztion posted by: Eric -- 11/23
3 responses -- 11/25

Which bsm to buy posted by: Bailey -- 11/22
4 responses -- 12/5

Small dehumidification kiln posted by: al -- 11/21
34 responses -- 1/6

David Bolstad of Lucas Mills posted by: Gene Wengert -- 11/20
2 responses -- 11/22

PEG wood treatment posted by: Stephen -- 11/20
6 responses -- 11/21

chainsawmilling posted by: william -- 11/19
3 responses -- 11/22

Drying Oak Lumber, Step 4A, Air Drying posted by: Gene Wengert-WoodDoc -- 11/19
0 responses

Drying Oak Luumber, Step 6C, Equalizing and Conditioning posted by: Gene Wengert-WoodDoc -- 11/18
0 responses

Drying Oak Lumber, Step 7, Storage posted by: Gene Wengert-WoodDoc -- 11/18
0 responses

steam bend/dry posted by: sam -- 11/17
2 responses -- 11/18

spruce and pine logs posted by: Jordan -- 11/16
0 responses

Kilns posted by: Ron Harris -- 11/13
11 responses -- 11/18

wood cupping posted by: Bud Bernitt -- 11/11
1 response -- 11/11

Lobo Resaw posted by: Charles Swanson -- 11/11
0 responses

portable sawing services in Northern Ca posted by: dollyb -- 11/10
1 response -- 11/11

drying walnut posted by: chris griffith -- 11/10
8 responses -- 11/13

Drying Capitol Christmas Tree Slabs posted by: Mark Patton -- 11/9
16 responses -- 11/16

kerf depth advice to stop splitting posted by: john -- 11/9
2 responses -- 11/9

walnut posted by: ryan -- 11/9
2 responses -- 1/4

Tradeshow Poll: Which Ones Do You Attend? ... vote in WOODWEB's latest Poll posted by: The Staff at WOODWEB -- 11/7
0 responses

Moisture video posted by: Gene Wengert-WoodDoc -- 11/6
6 responses -- 11/7

Drying Oak Lumber, Step 3B, Sample Boards posted by: Gene Wengert-WoodDoc -- 11/5
2 responses -- 11/8

Drying Oak Lumber, Step 3A, Measuring Moisture Content posted by: Gene Wengert-WoodDoc -- 11/5
0 responses

ASH HELP posted by: ryan -- 11/5
0 responses

Drying Oak Lumber, Step 2, Stacking posted by: Gene Wengert-WoodDoc -- 11/3
0 responses

Drying Oak Lumber, Step 1, Raw Material posted by: Gene Wengert-WoodDoc -- 11/3
8 responses -- 11/5

TK B-2000 questions posted by: Ricky -- 11/2
12 responses -- 1/8

lt40 blade engage posted by: al -- 11/1
2 responses -- 11/6

Using a dry-bulb and wet-bulb psychrometer posted by: Gene Wengert-WoodDoc -- 10/31
9 responses -- 11/2

Position of humidty sensor posted by: Tennessee Tim -- 10/30
2 responses -- 10/31

lumber stacking posted by: Robert -- 10/29
4 responses -- 10/30

Drying a piece of Apple posted by: Aaron -- 10/28
1 response -- 10/31

cedar blade signs posted by: Sam -- 10/28
6 responses -- 11/1

Measuring Kiln and Predryer Temperature and RH (or EMC or WB depression) posted by: Gene Wengert-WoodDoc -- 10/27
2 responses -- 11/2

Woodmizer WM1000 posted by: Brian -- 10/26
1 response -- 10/28

Drying logs for log house posted by: Fyodor -- 10/26
6 responses -- 11/30

Vacuum Kiln near Asheville NC posted by: SG -- 10/26
1 response -- 10/26

8/4 Red Oak posted by: Matt Carunchia -- 10/25
36 responses -- 11/1

Fast Log loading rig on my trailer...under $1000 posted by: Duane Slaymaker -- 10/22
3 responses -- 11/30

winter drying posted by: Charles Bess -- 10/22
2 responses -- 10/23

6/4 Red Oak posted by: Matt Carunchia -- 10/19
5 responses -- 10/26

moisture reader posted by: Robert -- 10/18
2 responses -- 10/19

oak kiln deterioration posted by: Troy Frazier -- 10/17
4 responses -- 10/21

Winter operations of solar kiln posted by: Ken -- 10/16
7 responses -- 12/8

Old Growth Douglas Fir Slabbing posted by: Steve Gschwend -- 10/15
2 responses -- 12/17

NEKDA Fall Meeting posted by: Bill Smith -- 10/10
0 responses

SkyLift for Handling Material posted by: Woodey -- 10/6
11 responses -- 11/30

How do I get the formula for determining the volume of a log? posted by: Sam -- 10/5
3 responses -- 10/6

Moisture Meter Poll ... vote in WOODWEB's latest Poll posted by: The Staff at WOODWEB -- 10/5
0 responses

forest fire trees posted by: Bill Stuewe -- 10/4
2 responses -- 10/22

Is this an ASH log?? posted by: Ed -- 10/4
8 responses -- 10/5

Wire rope clips posted by: Mike Morris -- 10/2
2 responses -- 10/11

When to harvest young hardwood posted by: Dave Cowan -- 10/2
1 response -- 10/22

Bulldozed Saw Logs posted by: Mike A. -- 10/1
9 responses -- 10/3

Bug killing/Heat Treating posted by: Bill Stuewe -- 9/29
3 responses -- 10/5

Boracare/mold question (pls look doc) posted by: Texas Timbers -- 9/28
4 responses -- 10/21

Storing wood outside in subtropical climate posted by: colin -- 9/26
8 responses -- 10/4

Conditioning in a Solar Kiln?? posted by: Correy -- 9/26
5 responses -- 9/28

Kiln Drying posted by: Dan -- 9/25
6 responses -- 9/28

stickers posted by: Bob -- 9/20
4 responses -- 9/21

How to make slabs of a very big tree posted by: Fermin -- 9/19
10 responses -- 9/28

lt 40 trowing blades off posted by: yeager -- 9/19
3 responses -- 9/26

Producing a rough faced board posted by: Charles Swanson -- 9/18
4 responses -- 9/28

1988 Woodmizer LT30 posted by: bob -- 9/15
4 responses -- 9/23

cutting stone with a bandmill posted by: jeremy -- 9/13
4 responses -- 9/16

Solar Kiln Drying posted by: Cody Colston -- 9/9
1 response -- 9/9

bugs and critters posted by: Tennessee Tim -- 9/8
5 responses -- 9/13

different cherry species posted by: tim -- 9/6
5 responses -- 9/9

Cook's bandmill parts posted by: Matt -- 9/5
1 response -- 9/6

Black Walnut Branches posted by: Frank -- 9/4
3 responses -- 9/9

Great Lakes Drying Assoc, Oct 13-14, Lansing, MI posted by: Gene Wengert-WoodDoc -- 9/2
0 responses

Virginia Pine posted by: Ken Culbertson -- 9/2
2 responses -- 9/7

Sawing Seminars, Oct 7 & 8, Paul Bunyan Show in Ohio posted by: Gene Wengert-WoodDoc -- 9/2
1 response -- 9/2

Bandsaw blade breakage posted by: Doug-Wis -- 9/1
11 responses -- 10/16

pitch in K.D. D.Fir finish posted by: david lundberg -- 8/31
2 responses -- 9/1

Beech lumber posted by: Steve -- 8/31
8 responses -- 9/2

One of the hydraulic pumps on my LT40 is out? Help posted by: Kelvin Potter -- 8/29
4 responses -- 9/12

looking for a vacuum kiln operator, NY state posted by: jessica wickham -- 8/19
3 responses -- 8/19

Does anyone else collect water on a DH kiln? posted by: WCPaul -- 8/17
5 responses -- 8/18

Moisture Reading After Planing posted by: Ed Bath -- 8/17
11 responses -- 9/15

Flow and increased yield of width of planks posted by: Brian Andersen -- 8/17
0 responses

WOODWEB giveaway! - Little Wizard II hand held metal detector posted by: The Staff at WOODWEB -- 8/16
0 responses

Best blade for Woodmizer LT40 Super? posted by: Kelvin Potter -- 8/15
5 responses -- 8/28

13HP Honda or 14HP Subaru posted by: Tommy -- 8/15
2 responses -- 8/17

Paulson Gang Rip posted by: Ray Doubleday -- 8/15
0 responses

log fences and clamps posted by: Casey Shaw -- 8/14
2 responses -- 8/15

TimberKing 1600 log turner posted by: merritt -- 8/14
1 response -- 8/16

Help with Bug Kill posted by: Bill Stuewe -- 8/14
1 response -- 8/17

kiln construction posted by: Lee baines -- 8/14
2 responses -- 8/15

when to cut trees posted by: Ron -- 8/13
25 responses -- 9/7

SAWING WALNUT posted by: BRUCE BORDELON -- 8/11
12 responses -- 9/5

conditioning 8/4 lumber in Nyle kiln posted by: Kelvin Potter -- 8/10
8 responses -- 12/18

Warp in Drying / Grading posted by: keith Newton -- 8/9
1 response -- 8/9

Blue Mold Fungus on Pine posted by: steve white -- 8/8
1 response -- 8/9

too much air flow? posted by: Chris Vickers -- 8/8
3 responses -- 8/8

fungal infections posted by: jackw -- 8/7
3 responses -- 8/10

Mix Loads posted by: Lester Gillett -- 8/6
2 responses -- 8/8

when to put oak in the kiln posted by: Ron -- 8/6
6 responses -- 8/8

walnut drying posted by: oldhickory -- 8/6
4 responses -- 8/9

Native American Flutes posted by: Sue S. -- 8/4
6 responses -- 8/6

Elm wood slabs posted by: John -- 8/4
2 responses -- 12/17

Timber Harvester 30HT25 posted by: Chad -- 8/4
5 responses -- 12/29

Drying a Slab of Locust posted by: Brian -- 8/3
6 responses -- 8/4

Weight of Green Eastern White Pine posted by: ROBERT DEMING -- 7/31
5 responses -- 8/2

planing walnut boards posted by: tim -- 7/30
1 response -- 7/31

choose wood species for stability and vibration damping and posted by: philsr -- 7/30
4 responses -- 7/31

Kiln Heat system posted by: Doug -- 7/28
3 responses -- 7/29

2-1/4" thick Garapa posted by: Stanley -- 7/28
2 responses -- 7/30

Psychrometer HELP posted by: ryanw -- 7/28
6 responses -- 7/28

Persimmon posted by: Ken -- 7/23
6 responses -- 7/25

Kiln operation posted by: Bernie Spangler -- 7/19
9 responses -- 7/23

Product Information Poll ... vote in WOODWEB's latest Poll posted by: The Staff at WOODWEB -- 7/18
0 responses

solar kiln class posted by: Lester Gillett -- 7/17
0 responses

Norway Spruce posted by: Best Wood -- 7/17
1 response -- 7/18

Sterilizing with cyclic heat (Solar kiln) posted by: cdh -- 7/16
19 responses -- 7/30

spalted maple, will it bleed through paint? posted by: Kelvin Potter -- 7/16
15 responses -- 7/21

maple posted by: Bill -- 7/14
3 responses -- 7/16

Advice on Drying Cherry posted by: Vic -- 7/12
9 responses -- 7/30

how long will wood shrink? posted by: Raymond Wang -- 7/12
2 responses -- 7/13

Drying Oak / Avoiding Blue Stain… move the stickers after 1 week posted by: OldBeau44 -- 7/12
3 responses -- 7/13

drying in a bag posted by: sawbuck -- 7/7
2 responses -- 7/8

Russian Olive posted by: Vince Mikla -- 7/6
1 response -- 7/12

insulation posted by: Bob -- 7/6
1 response -- 7/6

Need mfg of Wood Stakes posted by: Jerry McPherson -- 7/4
4 responses -- 7/6

Help finding log-to-lumber service posted by: Bob Deen -- 7/3
8 responses -- 7/6

Solar Kiln Fans Question posted by: Lester Gillett -- 6/27
4 responses -- 7/10

A nice score!!! posted by: B&Dmillwork -- 6/27
9 responses -- 7/1

Sourwood bark posted by: Ken -- 6/26
2 responses -- 6/28

Doulbe sided band saw mill blades posted by: RealtorTommy -- 6/26
7 responses -- 6/27

Green Timbers posted by: Steve -- 6/25
2 responses -- 6/26

kiln permit posted by: bob -- 6/24
12 responses -- 10/23

Puncture marks posted by: Steve -- 6/24
3 responses -- 6/25

What is this? posted by: Steve -- 6/23
3 responses -- 6/24

dipping lumber posted by: Robert -- 6/23
6 responses -- 6/24

Used Nyle L-300 kilns posted by: Wood Bender -- 6/20
0 responses

River Logs posted by: MadJack ME -- 6/20
3 responses -- 6/23

Solar Kiln Completed posted by: Cody Colston -- 6/19
10 responses -- 6/22

SAW HAMMERING TENSIONING posted by: Aitijhya mallick -- 6/17
7 responses -- 6/18

I have my sawmill but posted by: Ron -- 6/16
3 responses -- 6/18

HCC Dry Kiln Operator's Course posted by: Whit -- 6/14
1 response -- 8/1

vacuum drying cookies posted by: Dave Boyt -- 6/14
0 responses

Redwood air drying times? posted by: groovology -- 6/13
3 responses -- 7/7

Coconut Trees posted by: Daniel Preston -- 6/11
18 responses -- 6/16

Depression setpoints posted by: wood182 -- 6/9
2 responses -- 6/11

RTDs posted by: wood182 -- 6/8
6 responses -- 6/9

Bandsaw Blade Sharpeners posted by: Brandon Berdoll -- 6/5
3 responses -- 6/12

resawing speed posted by: martin -- 6/4
4 responses -- 7/7

walnut slabs drying posted by: doug -- 6/4
2 responses -- 6/5

Expanding Panelling posted by: Steve -- 6/1
1 response -- 6/1

live oak posted by: 3pepper -- 5/30
2 responses -- 6/5

white oak vs pressure treated posted by: Ricky -- 5/29
20 responses -- 6/11

Moisture Meter--Gann Hydromette HT 85 posted by: Bill Stuewe -- 5/28
6 responses -- 5/30

Chinese Chestnut posted by: Richard -- 5/27
3 responses -- 5/27

using green stickers posted by: Carla -- 5/26
4 responses -- 6/6

bugs in ash and oak (death by Kiln drying?) posted by: Eric -- 5/26
10 responses -- 6/2

Diameter through center LT15 and LT40 posted by: al -- 5/24
2 responses -- 5/30

Parallel to pith cut, quartersawn? posted by: ike mezo -- 5/23
4 responses -- 5/24

cedar prices posted by: Ricky -- 5/22
9 responses -- 5/28

wood-mizer carriage will not go forward posted by: Fred B. Moretz -- 5/21
5 responses -- 8/17

HCC SAWING & FILING CRS: POSTPONED! posted by: Whit -- 5/20
0 responses

home built kiln posted by: Jan -- 5/19
8 responses -- 5/21

Mystery wood resolved? Basswood? posted by: Kelvin Potter -- 5/18
7 responses -- 7/3

storing lumber posted by: poorhunter -- 5/18
3 responses -- 5/19

Old Oak and Pecan trees posted by: Doug -- 5/17
2 responses -- 5/19

Root cellar posted by: Tim -- 5/16
4 responses -- 5/17

drying eucalyptus posted by: david joseph -- 5/15
7 responses -- 11/9

poplar siding posted by: poorhunter -- 5/14
8 responses -- 5/16

Solar fans for solar kiln posted by: SPM_in_King -- 5/13
5 responses -- 7/16

HCC - SAWING & SAW FILING COURSES posted by: Whit -- 5/13
0 responses

beavers, oak trees and lumber posted by: Ian -- 5/11
11 responses -- 5/26

Mold on stickered cedar boards posted by: MnToyGuy -- 5/9
0 responses

need to slab up thick logs posted by: John Hancock -- 5/4
3 responses -- 5/4

solar kiln posted by: Steve -- 5/4
1 response -- 5/8

Name That Wood???? posted by: Randy Wynn -- 5/2
15 responses -- 7/6

WOODWEB's Shop Built Equipment Forum - A Brand New Resource at WOODWEB posted by: The Staff at WOODWEB -- 5/2
0 responses

Apple wood logs posted by: Kim -- 5/2
4 responses -- 5/3

WIREING DIAGRAM FOR DRYER posted by: OLD HIPPY -- 5/1
0 responses

Where to measure temps in a Solar Kiln posted by: Nick -- 4/29
15 responses -- 5/17

Drying Maple in a Solar Kiln - First load. Advice? posted by: Nick -- 4/28
3 responses -- 4/28

Moisture Checking posted by: Dry Climate -- 4/27
0 responses

Problem with hard maple checking posted by: Kelvin Potter -- 4/27
3 responses -- 4/28

how do predict humidity change? posted by: martin -- 4/26
2 responses -- 4/26

clutching electric powered mill posted by: Mark Lamarre -- 4/22
14 responses -- 8/29

Historical use of the word "cord" what unit might it be? posted by: Kelvin Potter -- 4/22
8 responses -- 4/28

Final MC in Nyle dry kiln, possible to overdry? posted by: Kelvin Potter -- 4/22
2 responses -- 4/24

Drying Hickory/Pecan posted by: Ron -- 4/21
1 response -- 4/21

When to put wood in the kiln posted by: Ron -- 4/21
6 responses -- 5/15

From the Staff at WOODWEB: Manufacturing Overhead Calculator posted by: The Staff at WOODWEB -- 4/21
0 responses

Crazy Moiisture Meter posted by: JimLewis -- 4/21
3 responses -- 4/21

Circular saw posted by: Brian -- 4/21
4 responses -- 4/22

case hard oak at low temp posted by: Lawrence -- 4/21
1 response -- 4/22

Cracks while drying posted by: Brandon Berdoll -- 4/20
3 responses -- 4/21

Question on fork test for case hardening posted by: Kelvin Potter -- 4/20
1 response -- 4/20

Is norway maple a Hard Maple? posted by: Kelvin Potter -- 4/19
3 responses -- 4/20

Small logs posted by: Ron -- 4/18
9 responses -- 4/20