
view most recent new threads at all WOODWEB Forums
You are not logged in. Why should I log in
 Sign up, and become a WOODWEB Member ... learn about the benefits.
- Rough Sawn posted by: MillworkDave -- 4/25
2 responses -- 4/26
- NEKDA May 2-3 posted by: Bill Smith -- 4/23
0 responses
- Advanced Lumber Drying posted by: Scott Weikert -- 4/23
0 responses
- Dry Kiln Short Course posted by: Scott Weikert -- 4/23
0 responses
- Oak drying posted by: Lester Gillett -- 4/22
2 responses -- 4/23
- "off the stump" moisture content posted by: Carl -- 4/22 --
1
4 responses -- 4/23
Pic of radial splitting in yellow poplar see post below posted by: John -- 4/21
2 responses -- 4/23
- Am I being paranoid? Tree felling and possible lengthwise splitting posted by: john -- 4/20
5 responses -- 4/26
- Wood boring bees posted by: Norm Grimberg -- 4/17
5 responses -- 4/21
Drying an oak slab for coffee table posted by: Mike C -- 4/12 -- 1
7 responses -- 4/17
- Wood expansion for frame and panel sided beehives posted by: Rich Grabon -- 4/11
2 responses -- 4/12
Wood identification posted by: Heinrich Spillmann -- 4/7
2 responses -- 4/9
- Fixing Wood Infestation posted by: Jim Lewis -- 4/6 --
2
7 responses -- 4/10
- Uncured poplar verses Southern yellow pine for timber frame posted by: Jonathan Cook -- 4/2
1 response -- 4/8
- old house boiler into a kild posted by: Alec Thurn -- 3/28
2 responses -- 4/1
- Keeping Lumber Dry posted by: Vic -- 3/27
2 responses -- 3/28
Powder post or Ambrosia? posted by: Carl -- 3/21 -- 1
8 responses -- 3/25
What are the risk of using air dried pine logs to build a log abin posted by: Charles Hanna -- 3/14
7 responses -- 3/17
- killing bugs in beams with heat. posted by: Jonathan Cook -- 3/6 --
1
1 response -- 3/7
- Drying 16/4 Walnut posted by: Jaime -- 3/4 --
1
4 responses -- 4/2
- Twisted Maple Log posted by: DaveM -- 3/1 --
1
5 responses -- 3/14
Heinrich's elm posted by: john -- 2/24
3 responses -- 3/8
- Solar Kiln - Ash drying questions posted by: Carl -- 2/24 --
1
3 responses -- 2/25
What Wood Species is this posted by: Heinrich Spillmann -- 2/16 -- 2
10 responses -- 2/20
- Solar Kiln pile placement question posted by: Carl -- 2/11
1 response -- 2/11
- Walnut Water pockets posted by: Charles Koch -- 2/8 --
1
1 response -- 2/9
- Fabricating a Holzma Throat Plate posted by: John G -- 1/31
0 responses
Holzher 1265 Panel saw posted by: Ricky -- 1/29
5 responses -- 2/6
- resawing moulder blanks posted by: Max -- 1/27
1 response -- 1/28
- RE: Questions regarding the color of Walnut, and when to cut it posted by: Tommy -- 1/26
2 responses -- 1/29
- burning wood scraps posted by: Gary -- 1/26 --
1
6 responses -- 1/29
- Building a wood fired kiln posted by: Michael -- 1/23 --
1
4 responses -- 2/7
- Shuanghuan horizontal band sawmill posted by: Robert Muller -- 1/20 --
1
3 responses -- 1/24
- RE: Walnut Questions posted by: Tommy -- 1/20
1 response -- 1/20
- Sealing green wood (entire board) posted by: Josh -- 1/18
5 responses -- 1/27
- kiln help posted by: Ryan White -- 1/17
1 response -- 1/17
kiln drying sinker Caribbean heart pine posted by: Bob Mayne -- 1/14
4 responses -- 1/16
- can an electric saw mill be powered efficiently by a gas powered generator? posted by: Gavin -- 1/12
4 responses -- 1/29
- Listening to your Saw posted by: John G -- 1/2
1 response -- 1/2
rotted out pine core posted by: john -- 12/31
4 responses -- 1/2
- Kiln Drying Workshop posted by: Bill Smith -- 12/27
0 responses
- Merry Christmas!!! posted by: Tennessee Tim -- 12/25
1 response -- 12/25
- L200M problems posted by: Peter -- 12/25
2 responses -- 12/25
- Chipping from Holzma Loader posted by: John G -- 12/14
0 responses
- Drying Wet Plywood in a Boat posted by: TomTom2017 -- 12/11
3 responses -- 12/15
- Steaming for the purpose of conditioning. posted by: Tom -- 11/27 --
1
3 responses -- 11/28
- auto engine to stationary posted by: risecoreelec -- 11/25 --
1
4 responses -- 11/30
- HAPPY THANKSGIVING!!!! posted by: Tennessee Tim -- 11/23
1 response -- 11/23
- How long to dry Douglas Fir after out in elements posted by: Holly -- 11/21
1 response -- 12/10
- Chainsaw mill posted by: Weasel -- 11/13 --
2
2 responses -- 11/18
- homade dry kiln heat source posted by: Dan -- 11/13 --
1
4 responses -- 12/12
- 7/8" Pitch Bands posted by: Mark B -- 11/6 --
1
2 responses -- 11/7
wood kiln electric heater posted by: Mark -- 10/29
12 responses -- 11/6
- Sawing large burl posted by: Steve chapman -- 10/25
0 responses
Drying a large slab of sugar maple posted by: Paul -- 10/18 -- 1
2 responses -- 10/24
- Too Early for the Kiln posted by: Samuel -- 10/6 --
1
6 responses -- 12/7
- Determining Retail posted by: D John -- 9/22
1 response -- 9/25
- Can't get separation between wet and dry bulbs... posted by: Nate -- 9/20
2 responses -- 9/26
- W Red Cedar Allergy posted by: Joe Wood -- 9/15
3 responses -- 9/16
- looking for AYC mill posted by: Corey smith -- 9/13
0 responses
- Handling Lumber Before Kiln Drying-Seminar Nov 2 Knoxille posted by: Gene Wengert-WoodDoc -- 9/11
1 response -- 9/11
- Storing KD timber outside posted by: Dominique -- 9/6 --
1
7 responses -- 9/8
- Exterior wood posted by: Weasel -- 9/4
4 responses -- 9/6
- Carpenter bees & dried hardwood storage posted by: Doug McKinney -- 8/29 --
1
4 responses -- 9/14
Old growth Cherry, possible value? posted by: GW -- 8/27 -- 2
16 responses -- 9/7
- Rock Elm posted by: Barry -- 8/22
4 responses -- 9/3
- Boxed heart posts posted by: Chris -- 8/19 --
2
2 responses -- 8/20
- chainsaw bar length posted by: al magrum -- 8/16
1 response -- 8/18
- saw blade lubrication posted by: steve -- 8/16
4 responses -- 11/15
- grading syp # 2 posted by: Rusty -- 8/16
0 responses
tree identification posted by: Ron Vickless -- 8/3 -- 3
3 responses -- 8/4
- Japanese? Elm posted by: steve -- 7/13 --
2
4 responses -- 7/15
Drying Black Spruce dead straight posted by: R. Rickards -- 7/11 -- 3
15 responses -- 1/25
- drying wood in a hot box posted by: BigJim -- 6/27
6 responses -- 7/23
inaccurate miter cuts DW718 posted by: cooksumrice -- 6/24 -- 2
2 responses -- 7/3
- milling spalted maple and pecan posted by: Kaleo -- 6/19 --
1
5 responses -- 6/23
advice and sawing and drying posted by: chris -- 6/17 -- 1
0 responses
Guides for double edge bandsaw blades posted by: sebastien Meunier -- 6/10
2 responses -- 6/18
Guess what caused this marking on walnut posted by: Brian -- 6/7 -- 3
9 responses -- 6/12
- PEG 300 vs. PEG 1000 posted by: kelvin potter -- 6/6 --
1
3 responses -- 1/31
- drying pine posted by: jim volkjm j -- 6/1
1 response -- 6/4
- pecan log posted by: Kaleo -- 5/30
1 response -- 5/30
DIY 5 foot wide bandsaw mill posted by: ROD HAYS -- 5/24 -- 2
4 responses -- 5/26
- eastern hemlock fence posts posted by: tom fidas -- 5/11 --
1
3 responses -- 5/12
twin blade edger adjustment posted by: Quentin -- 5/5 -- 1
0 responses
- microwaving prong tests??? posted by: Haessly Hardwood Lumber Sales -- 4/24
1 response -- 5/9
- Kiln Advice posted by: Ivan Moses -- 4/21 --
1
3 responses -- 2/15
- DIY debarker posted by: Jim -- 4/12
2 responses -- 4/15
- Heat Treated Lumber For Intl. Shipping, Might Need A Kiln? posted by: Joe Wood -- 4/12 --
1
6 responses -- 5/26
- PPB worries posted by: john boland -- 4/3 --
2
4 responses -- 4/4
- tooth set posted by: dlahart -- 4/2
2 responses -- 4/2
- Moisture reabsorbtion posted by: Anna -- 3/30
9 responses -- 4/2
- kiln drying old heart pine posted by: Bruce Bishop -- 3/28
3 responses -- 3/30
- How fast will mold show up on green lumber? posted by: Trace -- 3/27
5 responses -- 3/28
- low humidity posted by: J -- 3/23
1 response -- 3/24
- RE: Wood changing colors posted by: Tommy -- 3/21 --
1
4 responses -- 3/22
chainsaw milling posted by: exedman -- 3/17 -- 1
13 responses -- 6/7
- Does a tree build wood on the compression or tension side of the pith? posted by: Markb -- 3/15 --
2
3 responses -- 3/17
- Drying Cypress posted by: Bill Stuewe -- 3/12
2 responses -- 3/15
- Finishing an air dried stack posted by: fallguy -- 3/11
14 responses -- 3/24
- Thin wood posted by: Dan -- 3/4 --
3
11 responses -- 3/13
- Bandsaw Blade width Optimum for resawing KD door stile skins posted by: Scott -- 3/2
1 response -- 3/3
- solar kiln posted by: Lester Gillett -- 3/2
1 response -- 3/2
- home made bandsaw cutting 5' wide posted by: ROD HAYS -- 3/1 --
1
4 responses -- 7/18
- 10000 pound winch mounted in the back of a flatbed truck posted by: ROD HAYS -- 2/28 --
1
0 responses
- Weight and drying posted by: Paula Kay -- 2/27 --
2
4 responses -- 3/3
Reclaimed wood type and value? posted by: Nick Shears -- 2/17 -- 1
5 responses -- 2/19
Making big cookies posted by: Philippe -- 2/12 -- 2
3 responses -- 2/15
- Drying shed posted by: R.K. -- 2/9 --
1
2 responses -- 2/9
- Help with SCM Sigma 65 Beam Saw - Calibration posted by: R. Nelson -- 2/9
0 responses
- solar kiln posted by: al magrum -- 2/2
3 responses -- 2/6
- Stacking old air dried boards posted by: Philippe -- 2/2 --
1
6 responses -- 2/11
- Bandsaw blade sharpener posted by: Philippe -- 2/2 --
1
2 responses -- 9/25
- Drying Rate posted by: GSP -- 2/2
1 response -- 2/2
- Pre-dryer??? posted by: Haessly Hardwood Lumber Sales -- 1/27
3 responses -- 1/28
- Joining wet planks posted by: Jacobus Goosen -- 1/19
4 responses -- 1/27
- Drying 8/4 Cypress posted by: Vic -- 1/18
1 response -- 1/19
- waves and rip saw posted by: Bruce -- 1/13
2 responses -- 1/19
- 4/4 Hickory posted by: Bruce -- 1/6
5 responses -- 1/10
- White oak crossgrain and better cutting. posted by: fallguy -- 1/3
11 responses -- 1/29
- Finishing air dried lumber posted by: fallguy -- 1/3 --
3
6 responses -- 1/5
- twin blade sawmill idea posted by: ROD HAYS -- 12/28
5 responses -- 1/3
- 8/4 red oak posted by: woodlearner -- 12/23
3 responses -- 1/5
Manufacturing End Grain Wood Flooring on a Medium-Large Scale posted by: Dustin -- 12/22
2 responses -- 12/25
- Preserving small amount of plum for future projects posted by: Dustin -- 12/22 --
1
1 response -- 12/22
- Large Scale Drying posted by: Sandy Galvin -- 12/13
10 responses -- 1/4
- Frozen lumber posted by: woodlearner -- 12/10
2 responses -- 12/10
- Gattlinburg Fire posted by: Keith Newton -- 12/3
2 responses -- 12/4
- New kid on the block posted by: Bakerman -- 12/1
2 responses -- 4/7
- Kiln dried wood posted by: Jeff -- 11/28
11 responses -- 11/30
- Homag CH04 posted by: Antony -- 11/18
0 responses
- 8/4 redoak posted by: Dan -- 11/16
1 response -- 11/17
- Remove bark before or after drying large slabs posted by: Jodi -- 11/5 --
5
9 responses -- 11/8
- solar kiln posted by: steveintexas -- 11/2 --
1
3 responses -- 11/3
Bugs posted by: Heinrich -- 10/29 -- 4
10 responses -- 11/13
- Sinker Log Process Help posted by: Scott -- 10/8 --
2
11 responses -- 1/11
- Augmenting Solar Kiln posted by: Dan Becraft -- 10/3
1 response -- 10/5
- Kiln Operation Help posted by: Dan Becraft -- 9/23
8 responses -- 9/27
- Drying/Sawing of Black Locust posted by: KEN CULBERTSON -- 9/18
0 responses
- Drying black locust posted by: Ken Culbertson -- 9/15 --
2
6 responses -- 9/29
- width markings for R2E posted by: kaizenideas -- 9/14
0 responses
- 21% MC in blue pine stair treads posted by: Dan Becraft -- 9/8
7 responses -- 9/20
- Adv danced Drying Class October 12-13, Wausau, WI posted by: Gene Wengert-WoodDoc -- 9/7
0 responses
- AYC lumber grading? posted by: Corey smith -- 9/2 --
1
20 responses -- 9/5
Newbie with a saw posted by: Dan -- 8/29 -- 6
1 response -- 9/4
- determining wood species? posted by: KCR -- 8/29
1 response -- 8/30
- The reason I haven't been around much is because I sold my mill posted by: ROD HAYS -- 8/27
0 responses
- Ballpark equip costs to start milling reclaimed wood flooring?? posted by: Dustin -- 8/25 --
1
8 responses -- 9/4
- Stationary Log Carriage for 40' Logs - Best Options for a Newbie posted by: Robert Douglas -- 8/20
2 responses -- 1/7
Species id ? posted by: Frank W -- 8/20
7 responses -- 8/24
- sulphur fumigation candles posted by: Lester Gillett -- 8/17 --
1
2 responses -- 8/20
- Log pricing posted by: Peter MCNaughton -- 8/15 --
2
2 responses -- 8/26
- EMC and seasonal movement of exterior siding posted by: Jimmy W. -- 8/14
1 response -- 8/14
- Drying/acclimating? posted by: Ed Ward -- 8/11
1 response -- 8/12
- Converting my LT15 from gas to Electric posted by: Keith Newton -- 8/11
7 responses -- 8/12
Wood Type posted by: Gerald Crawford -- 8/9 -- 3
6 responses -- 8/10
Dehumidification air speed posted by: Stuart -- 8/6 -- 1
36 responses -- 9/9
- MSG Industries Mod MM250 baqndsawmill posted by: Jerry -- 8/4 --
1
0 responses
- DH kiln drying douglas fir beams and posts posted by: Eric -- 7/17
2 responses -- 7/17
- Drying 5/4 quarter sawed white oak posted by: ScottA -- 7/1
5 responses -- 7/5
worms in pine posted by: Bill Stuewe -- 6/28 -- 1
7 responses -- 7/2
wheelchair motor wiring for auto feed posted by: revid -- 6/11
20 responses -- 7/24
- How to kill bugs in an infested log....??? posted by: JeffD -- 6/2
5 responses -- 6/6
- How about a WIND POWERED mill! posted by: Keith Newton -- 6/2 --
2
5 responses -- 6/7
- "smoked" oak posted by: Troy Frazier -- 6/2
4 responses -- 3/16
- "smoked" oak posted by: Troy Frazier -- 6/2
0 responses
Kiln Drying Short Course July 19-21, 2016 posted by: Scott Weikert -- 6/1
0 responses
- Maintaining wet bulb temp posted by: Charles Koch -- 5/31
1 response -- 5/31
why is my butternut sapwood really hard & dark posted by: Jason Pollock -- 5/26 -- 2
16 responses -- 5/31
- Short needle pine for pier posted by: Philippe -- 5/24
3 responses -- 5/26
- Redwood getting black stains right after cutting posted by: james -- 5/13
3 responses -- 5/21
- Borax impregnation with vacuum press posted by: Frans -- 5/12
2 responses -- 5/12
Milling large (36"-40"dia) logs in Burien, WA posted by: Ben Wolk -- 4/16
2 responses -- 4/19
- Log pond posted by: Texas Timbers -- 4/15
5 responses -- 5/3
- Cool down times???? posted by: PA Lumber dryer -- 4/12 --
2
7 responses -- 4/18
- Transporting Sawn Ash posted by: wrfaris -- 4/7 --
4
7 responses -- 4/9
- Wood-mizer advice posted by: Will -- 4/6
2 responses -- 6/4
- Sawing and drying grown crooks posted by: Keith Newton -- 3/24 --
2
4 responses -- 3/30
- Huge quartersawn oak problem posted by: Desperate Dominique -- 3/14
4 responses -- 3/18
- acme rod for bandsaw mill posted by: revid -- 3/9 --
2
1 response -- 3/16
- 10/4 ash posted by: dan -- 3/9
0 responses
- Safety Speed Cut Panel Saw posted by: Scott Sawdust -- 3/1
0 responses
- reversing switch posted by: Yve -- 2/26
2 responses -- 2/27
- southeastern kiln club posted by: Ricky -- 2/26
3 responses -- 3/8
- 8/4 W. Oak R+Q posted by: Ryan -- 2/23 --
1
2 responses -- 2/24
- RE: Sawmill pillow block bearing posted by: Tommy -- 2/22 --
1
7 responses -- 7/31
- Drying 5/4 White Oak, TDAL won't equalize posted by: Derik -- 2/16
8 responses -- 2/18
- log lathe posted by: revid -- 2/13 --
2
9 responses -- 3/20
- River Birch mill thickness prior to kiln dry posted by: BR -- 2/9 --
2
4 responses -- 2/12
- defects posted by: DAN WHITE -- 2/3 --
3
5 responses -- 2/8
- Looking for high temp thermostat posted by: ricky -- 1/26
3 responses -- 1/27
- Hardwood Lumber & Sawmill Workshop posted by: Rich Christianson -- 1/24 --
1
2 responses -- 2/14
- hygrometers posted by: woodlearner -- 1/21
1 response -- 1/22
- Seal posted by: Dave -- 1/20 --
2
1 response -- 1/22
- Sealing the ends posted by: Paul -- 1/19 --
1
1 response -- 1/20
- newby sawyer, more questions. posted by: kaleo -- 1/18
4 responses -- 2/13
- I fell into a sawmill opportunity and would like some advice posted by: Travis -- 1/17 --
1
17 responses -- 2/16
- Build your own solar kiln posted by: Gene Wengert-WoodDoc -- 1/14 --
2
9 responses -- 2/26
species identification posted by: Peter Ford -- 1/11
6 responses -- 1/15
- Wax and Wood posted by: Dave -- 1/10 --
1
5 responses -- 1/12
Various species of wood posted by: Daniel Morton -- 1/8
0 responses
- drying to single digits p2 posted by: Kim Vedros -- 1/7
6 responses -- 1/9
- Don't Know How posted by: Dave -- 1/3 --
2
7 responses -- 1/5
- newby sawyer posted by: kaleo -- 1/1
5 responses -- 1/5
- When should I use the log dogs? posted by: Philippe -- 12/31 --
2
9 responses -- 1/7
- alaska chainsaw mill posted by: weasel -- 12/24 --
2
7 responses -- 4/12
- Need to kill some bugs posted by: Tim -- 12/21
8 responses -- 12/29
- Faster way to straighten a cupped lamination? posted by: Mel -- 12/21
0 responses
- good planers posted by: weasel -- 12/19 --
1
4 responses -- 12/23
- Sawing a dead tree posted by: Philippe -- 12/15 --
4
5 responses -- 12/19
- Drying posted by: David -- 12/14
1 response -- 12/15
- Sawing timbers posted by: logmaster -- 12/13
1 response -- 12/15
- Band saw water tank refill posted by: Philippe -- 12/8
8 responses -- 2/22
- RE: Dehumidifiers for Kilns posted by: Tommy -- 12/8
6 responses -- 12/20
- RE: Many categories of Oaks posted by: Tommy -- 12/7
1 response -- 12/8
- Need to heat dry 57 Pieces of Teak posted by: Alfredo Franco -- 12/7
2 responses -- 12/9
- Doug Fir Beams posted by: Myron Fry -- 12/7
1 response -- 12/7
please help identify wood posted by: Shaun -- 12/5 -- 1
7 responses -- 1/4
- RE: Gum wood posted by: Tommy -- 12/4
4 responses -- 12/8
Kiln Drying Workshop - Jan 11-14, 2016 posted by: Bill Smith -- 12/4 -- 2
0 responses
- drying to single digits posted by: Kim Vedros -- 12/1 --
1
10 responses -- 12/11
- Separating Lumber to sell posted by: Richard -- 11/28 --
4
6 responses -- 12/1
- RE: Hot box to dry wood posted by: Tommy -- 11/25
2 responses -- 11/25
- Lumber grading posted by: Stevem -- 11/22 --
1
1 response -- 11/25
- recover (formerly) dried lumber exposed to elements posted by: Keith -- 11/21 --
1
4 responses -- 11/22
- moisture, heat and lignin posted by: Elia Bizzarri -- 11/15 --
2
7 responses -- 11/18
- RE: Making a Kiln posted by: Tommy -- 11/13
1 response -- 11/16
- Cedar walls posted by: Bill -- 11/3 --
1
2 responses -- 11/4
- Cutting Slabs posted by: Elkrut -- 11/3 --
5
5 responses -- 11/12
- RE: Cutting Cants out of the Logs posted by: Tommy -- 11/2 --
2
3 responses -- 11/13
Gene Wengert Question posted by: Cabmaker -- 10/29 -- 1
4 responses -- 11/9
- how do i fast cut (manual) on a giben 401????? posted by: mike gervais -- 10/28
2 responses -- 12/23
- Using old wood for new projects? posted by: Max Neu -- 10/25
13 responses -- 11/1
- Russian vs. American White Oak posted by: Tommy -- 10/24
1 response -- 10/25
- wood slabs checking posted by: Jason peterson -- 10/23 --
4
4 responses -- 10/25
- Bandsaw Blade Re-Sharpening posted by: Tommy -- 10/19 --
1
4 responses -- 12/14
- Schelling Service and Training posted by: Doug Calaman -- 10/15
1 response -- 10/15
- Moisture Content of lumber posted by: John -- 10/13 --
3
4 responses -- 10/20
- RE: Bandsaw Blade Life posted by: Tommy -- 10/9 --
1
3 responses -- 10/20
Flooring made from poplar that's not been tongue and groove posted by: rod hays -- 10/4
12 responses -- 10/9
- sinker wood drying posted by: Tom John -- 10/3 --
1
1 response -- 10/4
- to calculate driven pulley size posted by: hussain -- 10/3
4 responses -- 10/4
- sharpening blades posted by: revid -- 9/29
1 response -- 10/20
- fan reversals posted by: joel -- 9/26
6 responses -- 10/4
- Wide Band Mill posted by: Fred Clark -- 9/26 --
1
6 responses -- 10/15
- Which mill? posted by: Michael -- 9/25 --
2
2 responses -- 10/15
- Solar Kiln Interior Paint posted by: David -- 9/24
2 responses -- 9/25
- NYle Kiln L200 posted by: Larry Guay -- 9/24 --
2
4 responses -- 2/24
- Channeled Sticker Manufacturers posted by: Bucky Black -- 9/22
3 responses -- 10/4
- Forest fuel load reduction posted by: Stevem -- 9/21 --
1
3 responses -- 10/2
- Dying hemlock slabs posted by: Ken Culbertson -- 9/19
0 responses
- bandsaw bed guides posted by: Yve -- 9/18 --
1
7 responses -- 10/17
- Paul Bois, National Drying Specialist posted by: Gene Wengert-WoodDoc -- 9/17 --
2
0 responses
- Drying Ash posted by: Mark -- 9/16 --
1
1 response -- 9/30
Lumber ID posted by: Doug -- 9/13 -- 2
11 responses -- 9/17
- colarado blue spruce posted by: J Volk -- 9/13 --
1
1 response -- 9/13
- Chestnut Logs posted by: Ronnie Bennett -- 9/10
1 response -- 9/10
- Water Locust wood, not Honeylocust posted by: Keith Newton -- 9/9 --
2
1 response -- 9/9
- autofeed posted by: revid -- 9/6 --
1
9 responses -- 9/10
- Vacuum Drying posted by: Fred Clark -- 9/5 --
5
0 responses
- RE: Product to prevent cracking posted by: Tommy -- 9/4
4 responses -- 9/11
- Powder Post Beetles in Furniture? posted by: Steve -- 9/2 --
3
1 response -- 9/4
- bandsawing posted by: revid -- 9/2 --
1
3 responses -- 9/6
- Timber Harvester 30HT25 posted by: al -- 9/1
5 responses -- 9/3
- Mc content for coastal South Carolina posted by: Dave -- 8/27 --
1
3 responses -- 8/28
- Advanced Drying Class, Nov 11-12, 2015 in Johnson City, TN posted by: Gene Wengert-Wood Doc -- 8/25
0 responses
Log stockpile quantity posted by: Steve dancey -- 8/18
1 response -- 8/19
- Mystery Wood posted by: Ian -- 8/16
5 responses -- 8/18
- a random prong test posted by: woodlearner -- 8/15 --
2
2 responses -- 8/17
Another chainsaw question posted by: Joel -- 8/11 -- 1
4 responses -- 8/14
- Can I dry wood too much posted by: Brock -- 8/11 --
1
3 responses -- 8/31
- Board and Batten existing siding posted by: Mark Schenkel -- 8/10 --
1
1 response -- 8/12
- 12/4 live edge walnut posted by: Paul Howard -- 8/5 --
1
1 response -- 8/7
- Splined chainsaw carb adjustment tool. posted by: Joel -- 8/2
3 responses -- 8/7
- cutting laminate flooring posted by: Ray -- 7/24 --
2
4 responses -- 7/28
- Source for Spalted Maple posted by: Kevin -- 7/21
1 response -- 7/22
- milling quartered red oak posted by: andy -- 7/20 --
1
5 responses -- 8/7
- Building an edger on a bandsaw mill posted by: Rod Hays -- 7/13 --
1
3 responses -- 7/23
- Oregon white oak posted by: Bill douglas -- 7/12
2 responses -- 7/17
- Solar Kiln Question posted by: mdennisusa1 -- 7/11 --
3
4 responses -- 7/16
- Here is a video of how my hand sharpened blade cuts posted by: Rod Hays -- 7/8 --
2
11 responses -- 7/19
- timber cruising work posted by: joe -- 7/1
1 response -- 7/27
- Red Oak for Barn Siding posted by: olcus -- 6/26 --
2
7 responses -- 7/30
- mc of core/shell and equilizing posted by: woodlearner -- 6/19 --
2
3 responses -- 6/20
- anyone ever charred wood for perseving aka Shou sugi ban posted by: jaycee -- 6/17 --
2
3 responses -- 6/26
- EXTECH Moisture Meter M0210 posted by: Mike -- 6/15 --
1
1 response -- 6/15
- Advanced Lumber Drying, Nov. 12-13, KY posted by: Gene Wengert-Wood Doc -- 6/14 --
3
0 responses
What the heck is this??? posted by: Rick Harrison -- 6/12 -- 2
7 responses -- 7/6
- Giant American Holly - Need Advice posted by: Tyler Laverick -- 6/10
3 responses -- 6/12
- Band Blades posted by: D LaHart -- 6/10 --
3
8 responses -- 3/16
- Est Dry log weight posted by: James -- 6/10
4 responses -- 6/13
- How to kill beetles that like to eat Southern Pine posted by: woodisgood -- 6/10
6 responses -- 6/11
- RE: Rotted surface hardwood logs posted by: Ken -- 6/8 --
2
6 responses -- 7/6
- White Oak Siding - Whole log or just heartwood? posted by: James Walker -- 6/8 --
1
3 responses -- 7/1
- Business costs regarding choice of wood fence posts posted by: goodiswood -- 6/7 --
1
5 responses -- 6/10
differance between cedar and cypress tree posted by: Jaycee -- 6/6 -- 2
8 responses -- 6/11
- TIG WELDED WOOD MIZER BLADE Double Hard 7/34 posted by: Ehzan -- 6/6
2 responses -- 6/7
- RE: Bandsaw Mill troubles... posted by: Ken -- 6/1 --
3
4 responses -- 6/3
- RE: Uses for Spruce & Gum logs posted by: Ken -- 6/1
4 responses -- 6/2
- CD bansawmill and Stanner posted by: kufre -- 5/26 --
1
1 response -- 5/26
- Timber Frame Barn posted by: Jofussino -- 5/21
1 response -- 6/8
- Specs for Live Sawn or European cut Flooring Lumber posted by: Joe -- 5/10
0 responses
- Wood Boring Insect Larva Prevention posted by: Charles Hanna -- 5/8 --
1
8 responses -- 5/19
- Heat Treating 6" X 8" pine house logs posted by: Charles Hanna -- 5/7
4 responses -- 10/2
NEKDA Spring Meeting - May 13-14 posted by: Bill Smith -- 5/5
0 responses
- RE: Remove black mold posted by: Ken -- 5/1 --
2
2 responses -- 5/2
- Plants to plant to discourage insects posted by: Hana Grown Hardwoods -- 4/28 --
1
2 responses -- 5/2
- Black Walnut log prices posted by: Craig -- 4/28 --
1
5 responses -- 7/1
- Mobile Devices And Apps: Which One Do You Use? ... WOODWEB's latest poll posted by: The Staff at WOODWEB -- 4/17 --
2
0 responses
- kiln doors posted by: Moscowman -- 4/9
2 responses -- 4/11
- Looking for used Nyle L500 or L300 posted by: Chris -- 4/9 --
2
0 responses
- Fresh sawed hikory turned red posted by: Doug Rosine -- 4/8
0 responses
- RE: Better blades producing less sawdust posted by: Ken -- 4/8 --
2
3 responses -- 5/2
- Need advice about my bookmatched quilted maple posted by: Gregory Pinkowski -- 4/7 --
2
2 responses -- 4/8
Swing Blade Tension posted by: George Elder -- 4/7
2 responses -- 10/29
- SAWING posted by: BRUCE BORDELON -- 4/7
6 responses -- 5/2
honey comb in walnut posted by: Kim Vedros -- 4/6
7 responses -- 4/10
- limbs for lumber posted by: mudbug -- 4/5 --
4
3 responses -- 4/18
- severe checking in air-dried white oak posted by: Rick U. -- 4/3
3 responses -- 5/21
- Quality Grizzly 30 sawmill posted by: al -- 3/27
0 responses
- Aromatic cedar for decking posted by: al -- 3/26 --
1
5 responses -- 3/28
Wood Identification posted by: David -- 3/23
5 responses -- 7/1
- Deadpiling wood in a kiln year round posted by: Jeff Lonigro -- 3/21 --
3
1 response -- 3/22
Making a cut to avoid cracking posted by: Andries -- 3/21 -- 1
2 responses -- 3/22
- Reclaimed wood for exterior patio furniture posted by: Brandon -- 3/18
5 responses -- 4/7
- Drying Black Spruce posted by: Jeff Cowley -- 3/17 --
1
1 response -- 3/17
- What is the current Pine Pallet Lumber Prices? posted by: Chris Waits -- 3/15 --
1
0 responses
- Drying & Shrinking of 1/4 inch Veneer posted by: Ken -- 3/13
2 responses -- 3/17
- price for logs posted by: shawn -- 3/13 --
1
0 responses
- 2015 VT Solar Lumber Drying Course posted by: Brian Bond -- 3/13
0 responses
- sawing shorts on Wood-Mizer Lt40 posted by: Frederico B Moretz -- 3/12 --
1
2 responses -- 3/14
- Milling burls for blanks posted by: Frederico B Moretz -- 3/12 --
1
1 response -- 3/14
- Air Drying Holly posted by: Nick -- 3/5 --
1
1 response -- 3/6
- 1st Job posted by: Donald Murphy -- 3/4 --
1
15 responses -- 3/12
- WOODWEB Poll: How's Business? posted by: The Staff at WOODWEB -- 3/4
1 response -- 4/10
"live edge veneer"?? posted by: jacob -- 2/26 -- 1
3 responses -- 3/2
width of irregularly-shaped lumber for BF calculation posted by: SR -- 2/26 -- 2
4 responses -- 2/28
- Annual Hardwood Dry Kiln Operator's Short Course - NC State posted by: Tom the Sawyer -- 2/26 --
1
0 responses
- Wood movement across large widths posted by: Vic -- 2/25 --
3
3 responses -- 2/28
live edge weeping cherry tables posted by: john -- 2/25 -- 2
8 responses -- 3/3
- California Urban Wood Utilization Conference April 2nd-4th 2015 posted by: John Dominguez -- 2/24 --
1
2 responses -- 2/26
- Advance Kiln Drying Workshop- March 11, 2015 posted by: Scott Weikert -- 2/23 --
2
0 responses
Lumber Drying Workshop - March 11 posted by: Tad Smith -- 2/21 -- 1
4 responses -- 2/23
- Got and 7.5 hp electric motor for my LT15 posted by: Keith Newton -- 2/19
5 responses -- 2/20
Stabilizing red oak with PEG 300 posted by: Heinrich Spillmann -- 2/19 -- 1
3 responses -- 2/20
- Wood Mizer 3500 posted by: Keith -- 2/19 --
1
0 responses
- barn lumber posted by: 3d lumber -- 2/14
1 response -- 2/15
- Cooking green wood in linseed oil posted by: Heinrich Spillmann -- 2/12
6 responses -- 2/13
- milling boards for future jobs posted by: Tim -- 2/10 --
1
3 responses -- 2/16
live edge cherry table posted by: john -- 2/8 -- 1
5 responses -- 2/13
- secondary heat source for solar kiln posted by: Doug Simpson -- 2/8 --
2
6 responses -- 3/1
Weird stain on dried basswood posted by: Mickey McCann -- 2/7 -- 1
3 responses -- 2/8
- Drying maple cookies posted by: Ken Culbertson -- 2/6
5 responses -- 2/11
- Sawing white oak or red oak for flooing posted by: Ken -- 2/4
2 responses -- 2/11
- Flooring installation in the Caribbean posted by: Ken -- 2/3
1 response -- 2/4
Log taper adjuster posted by: Per-Olov -- 2/2
2 responses -- 2/16
- Debarkers posted by: Ken -- 1/31
4 responses -- 3/4
Ventilation for drying shed... blow in, or out ? posted by: Philippe -- 1/30 -- 1
6 responses -- 3/1
- phase inverters pros and cons posted by: john -- 1/30
10 responses -- 2/2
- Need a book or manual on sawyer terminology. posted by: olcus -- 1/29
3 responses -- 2/22
- Advance Kiln Drying Workshop posted by: Scott Weikert -- 1/27
0 responses
- Advice on sawing different cedar species for air drying posted by: Lee -- 1/26
3 responses -- 2/18
- Numbers divided by a slash? 4/4, 5/4 etc... posted by: olcus -- 1/23
8 responses -- 2/20
- new old stock chestnut posted by: chris -- 1/22
3 responses -- 2/3
How to cut a diamond shaped panel posted by: Paul V Tabone -- 1/20
2 responses -- 1/21
- Roller Blade Guides Affect on Blade Life posted by: Terry robinson -- 1/18
8 responses -- 1/19
- Flat stacking doug fir posted by: wurthless -- 1/16
3 responses -- 2/16
- Best way to preserve freshly cut boards for outdoor use posted by: Philippe -- 1/12
6 responses -- 1/16
table legs posted by: john -- 1/8
6 responses -- 1/23
table legs posted by: john -- 1/8
0 responses
White Hard Maple is Off Color posted by: Bruce Erdman -- 1/8
11 responses -- 2/7
- Bandsaw mill blade solution freezing during the winter posted by: Ken -- 1/7
6 responses -- 1/19
- WOODWEB Anniversary Poll - 20 years of service posted by: The Staff at WOODWEB -- 1/7
0 responses
- Slab mill posted by: Michael -- 1/6
1 response -- 1/6
Cuts for quartersawn logs posted by: Philippe -- 1/3
7 responses -- 1/12
- alberta spruce/pine posted by: t -- 1/1
3 responses -- 1/2
- Books - Sawing & Drying posted by: Gene Wengert-WoodDoc -- 12/29
3 responses -- 1/15
- what type of sawmill posted by: Michael -- 12/29
8 responses -- 4/16
- Using tobacco kiln to dry lumber? posted by: cody capron -- 12/26
3 responses -- 12/29
SLAB SAWING with BIG SAW posted by: AJ Mearns -- 12/22
5 responses -- 12/24
- Resawing Questions posted by: Brett Barton -- 12/20
7 responses -- 1/16
- when can we use white oak? posted by: kp2566 -- 12/14 --
1
13 responses -- 12/18
- pine/spruce stakes posted by: t -- 12/9
4 responses -- 12/31
- morgan mini scrag posted by: Curt Bonney -- 12/9
0 responses
- carving cavity in tree trunk posted by: Mark -- 12/8
12 responses -- 12/26
- Video load logs from the end of the bandsaw mill posted by: Rod Hays -- 12/5
0 responses
- Green timber winter air drying posted by: Dominique -- 12/2
2 responses -- 12/2
- Lt 40 super Hyd lubemizer issue posted by: Peace -- 11/30
1 response -- 12/5
Kiln Drying Workshop - Syracuse, Jan 5-8, 2015 posted by: Bill Smith -- 11/25
0 responses
- Video of my first attempt of flipping a big log on my manual mill posted by: Rod Hays -- 11/25
2 responses -- 12/4
Photo of my way to load big logs on the mill posted by: Rod Hays -- 11/23
2 responses -- 12/4
- Vacuum Drying Workshop posted by: Oxana Brenes -- 11/20
0 responses
- homemade kiln posted by: Ricky Godfrey -- 11/19
2 responses -- 11/19
tree trunk table top cupping posted by: alljays -- 11/19
7 responses -- 12/16
- 130 deg. for how long to kill bugs in 2x Red Oak? posted by: Jamie -- 11/15
6 responses -- 11/28
- Humidifying large space to control wood moisture problems posted by: Scott Peterson -- 11/14
4 responses -- 11/27
- Solar Kiln from Storm Smashed Greenhouse posted by: Richard Campbell -- 11/11
5 responses -- 12/5
- moss/lichen on oak trunk pieces posted by: Debbie -- 11/6
3 responses -- 11/8
- oak tree drying /deck posted by: gerrard rudd -- 11/4
12 responses -- 11/13
- air circulation in kiln posted by: Dave -- 10/29
1 response -- 10/29
- HwConfig for Schelling posted by: titi -- 10/23
0 responses
- Virginia Tech: Vacuum Drying Workshop posted by: Oxana Brenes -- 10/21
5 responses -- 10/31
- cutting irregular shaped logs posted by: Assar -- 10/17
3 responses -- 10/19
- uneven cut on bandsaw mill posted by: Assar -- 10/17
12 responses -- 3/16
- Vacuum Drying Workshop posted by: Den Socling -- 10/15
0 responses
large oak burl posted by: john -- 10/11
6 responses -- 10/24
- Sycamore logs posted by: Ron Webber -- 10/7
1 response -- 10/7
Jet 708301K w/ Cast Iron Extensions posted by: colorado243 -- 10/6
0 responses
- Video of my homemade bandsaw running posted by: Rod Hays -- 10/1 --
1
2 responses -- 9/3
- breaking bandmill blades posted by: Ben Wheatley -- 9/24
6 responses -- 9/28
- Steaming/stickering questions posted by: 10Goal -- 9/19
5 responses -- 10/5
- Cypress source posted by: Seth Nelson -- 9/17
5 responses -- 10/8
- Cutting a short log posted by: Rod Hays -- 9/16
0 responses
- Question posted by: John Alden -- 9/16
4 responses -- 9/23
Looking for Band Sawmill Operator NW Arkansas posted by: Charles Hanna -- 9/12
0 responses
- After sawing for about a year I haven't broke a blade posted by: Rod Hays -- 9/10
5 responses -- 9/23
- eastern white pine drying time posted by: tim -- 9/10
2 responses -- 9/11
- Drying kiln using a reefer body and Nyle dehumidifier posted by: Ed Schmidt -- 9/6 --
2
9 responses -- 10/3
were can i buy a chainsaw mill which cuts 65 inches or 72 inches posted by: Daniel -- 9/6 -- 2
9 responses -- 12/22
- RE: Root Ball posted by: Ken -- 8/28
8 responses -- 9/6
- charging for planing lumber posted by: Lester Gillett -- 8/25
4 responses -- 12/7
- guide rollers flange posted by: Steve N -- 8/24
4 responses -- 9/15
- Solar Kiln - Fan size and other materials posted by: David Morris -- 8/19
6 responses -- 8/23
- sent 6 blades off for resharp posted by: Rod Hays -- 8/15
25 responses -- 8/19
Thick, Large Black Walnut Slabs posted by: Richard Lear -- 8/14
10 responses -- 9/2
- Slab sawing posted by: Tom Fitz -- 8/13
3 responses -- 10/20
- Gingko Logs posted by: Fred -- 8/13
2 responses -- 8/13
- I found a maket for my lumber,RR ties posted by: Rod Hays -- 8/12
2 responses -- 8/19
those shingles i was cutting are now on the shed posted by: Rod Hays -- 8/9
5 responses -- 8/10
My sawdust pile posted by: Rod Hays -- 8/7
3 responses -- 9/14
- Feed back on Hud-Son Oscar 328 posted by: Nick Holeman -- 8/6
5 responses -- 9/7
- Video of my homemade shingle jig posted by: Rod Hays -- 8/5
0 responses
- Beginners and Advanced Drying School Aug 11-15 posted by: Gene Wengert-WoodDoc -- 8/3
1 response -- 8/4
Shed I built from a dead Black Oak posted by: Rod Hays -- 8/3
2 responses -- 8/4
Extrema Straightline Saw (Single Phase) posted by: Jake Oestriecher -- 8/1
0 responses
- Solar kiln : Leave Circulation fans on after sunset posted by: Frans -- 7/24
4 responses -- 7/29
- Video of my 12 volt dual feed cutting a Black Oak posted by: Rod Hays -- 7/23
9 responses -- 7/27
- RE: Guide Roller for Bandsaw Mill posted by: Ken -- 7/23
1 response -- 7/23
- Is there a practical limit to how small a kiln can be? posted by: Mark B -- 7/22
4 responses -- 7/24
- 12 volt dual feed on a bandsaw mill posted by: Rod Hays -- 7/21 --
2
2 responses -- 9/16
stairway I built from my homemade mill posted by: Rod Hays -- 7/19
7 responses -- 8/13
- New to sawing and drying posted by: Casey -- 7/14
3 responses -- 7/16
- National Parks Service at Saugus Ironworks needs 5 LARGE white oaks. posted by: Mark Emig -- 7/12
1 response -- 7/14
- Here is what I have been doing with some of my short logs posted by: Rod Hays -- 7/11
2 responses -- 7/13
- Sawyer Rochester, Ny area posted by: Jr Lee -- 7/9
2 responses -- 7/10
- Felled Oak. How long is too long on ground? posted by: Goat -- 7/6
2 responses -- 7/7
- White oak logs posted by: Ken Culbertson -- 7/3
3 responses -- 7/4
- drying wood posted by: Brian -- 7/3
0 responses
- Storing wood rounds/slices posted by: M -- 6/26
4 responses -- 7/2
- Thick walnut mantles posted by: Ken Culbertson -- 6/20 --
1
3 responses -- 6/22
- how long to dry oak for barn construction posted by: Gene Wooden -- 6/18
12 responses -- 8/13
40 inch diameter log in solar kiln posted by: Heinrich -- 6/15
16 responses -- 7/2
- Red, White Oak Air drying shrinkage time? posted by: olcus -- 6/15
3 responses -- 6/21
- Best Chainsaw for cutting large diameter logs lengthwise posted by: Ken -- 6/14 --
3
5 responses -- 7/16
Best Chainsaw for cutting large diameter logs lengthwise posted by: Ken -- 6/14 -- 1
1 response -- 8/29
- Drying a slab using polyethylene glycol posted by: Joe Wolly -- 6/14 --
1
4 responses -- 6/15
- cruisers posted by: jon -- 6/11
2 responses -- 6/24
- question around routing of electric cables over my Woodmizer LT-15 Electric posted by: Bill -- 6/11
6 responses -- 6/13
Drying slab locust from a stump posted by: Joe Wolly -- 6/10
6 responses -- 6/17
- Wood fired kiln posted by: J.S. -- 6/9
4 responses -- 6/14
- Decay resistant stickers / sticker stain prevention? posted by: Keith Newton -- 6/4
2 responses -- 6/4
- splits in large slabs posted by: Don Ditmars -- 6/4 --
1
10 responses -- 6/14
That Beech I cut up is now being made into this posted by: Rod Hays -- 6/1
5 responses -- 6/29
- lodgepole pine posted by: Camille -- 5/31
1 response -- 5/31
- Degradation of wood when frozen posted by: Mark gingery -- 5/29
1 response -- 5/30
Foley Belsaw posted by: Erik Pieper -- 5/29
1 response -- 7/4
- Portable mill for hire in Toronto area posted by: Noah -- 5/28
2 responses -- 7/2
- Another Powderpost beetle problem posted by: TTalma -- 5/27
4 responses -- 6/3
- My DIY power feed is working now posted by: Rod Hays -- 5/26 --
2
1 response -- 9/8
- anchor seal 2 posted by: john -- 5/26
2 responses -- 5/28
choppy cuts, band saw posted by: thomasrussel -- 5/20
9 responses -- 7/3
- My first cut on quarter sawing 36'' Beech posted by: Rod Hays -- 5/15
7 responses -- 5/25
- Sanding Beech posted by: Rod Hays -- 5/15
3 responses -- 5/18
- Air Drying Cypress posted by: Dwight Farris -- 5/13
1 response -- 5/14
- Cut a 36'' Beech on my manual bandsaw mill posted by: Rod Hays -- 5/13
3 responses -- 5/14
- mobile sawing massachusetts posted by: Deb -- 5/13
2 responses -- 5/14
- Avoiding Stain in Hickory posted by: Joe -- 5/13
1 response -- 5/17
- RE: large amounts of flies near wood pile posted by: Ken -- 5/12
0 responses
- Cobalt blades coming soon posted by: Rod Hays -- 5/12 --
1
10 responses -- 5/17
- Resawing air dried black walnut posted by: Mike -- 5/12
4 responses -- 5/20
- solar vs. electric kiln drying schedules posted by: Heinrich -- 5/12
6 responses -- 5/15
- To saw or not to saw? posted by: Craig -- 5/9
2 responses -- 5/12
- Dr. Wengert's Book posted by: Ken Culbertson -- 5/8
1 response -- 5/11
- Blade Pitch posted by: DaveM -- 5/6
12 responses -- 5/9
- Adding power feed to may bandsaw mill posted by: Rod Hays -- 5/3
2 responses -- 5/8
- Sticks posted by: Ryan -- 4/29
1 response -- 5/8
- Homemade blade sharpener from a chainsaw sharpener posted by: Rod Hays -- 4/24
7 responses -- 4/30
- My new improved tooth setter posted by: Rod Hays -- 4/23
0 responses
- picnic table I built from my sawmill posted by: Rod Hays -- 4/22
5 responses -- 12/29
- Re-welding bands? posted by: Mark B -- 4/22
3 responses -- 8/6
- Reason to Use Your Calculator posted by: John Idaho -- 4/21
4 responses -- 5/11
- 6/4 8/4 maple drying posted by: Kevin -- 4/16
4 responses -- 4/20
- Kiln control posted by: Jerry -- 4/14
6 responses -- 4/26
- Cutting a cherry log with my homemade bandsaw mill posted by: Rod Hays -- 4/13
4 responses -- 4/17
- Hollowing out a log on a bandsaw mill posted by: Rod Hays -- 4/13
1 response -- 4/14
- RE: Bandsaw Blades posted by: Ken -- 4/11
2 responses -- 4/14
- Stain posted by: Ryan -- 4/10
1 response -- 4/12
- inventory of milled lumber posted by: Dan -- 4/9
2 responses -- 4/10
- Lost some timber to storm? posted by: Keith Newton -- 4/6
1 response -- 4/8
- Black Walnut Tree posted by: Richard Lear -- 4/3 --
1
16 responses -- 4/6
- Thickness standard for 5/4? posted by: Dave Boyt -- 3/31 --
1
39 responses -- 4/4
- Looking for Nyle L500 posted by: Ron Harris -- 3/29
0 responses
- Video demonstration on how I load logs onto the mill posted by: Rod Hays -- 3/25
2 responses -- 3/31
- Finally going to build a Solar kiln posted by: Keith Newton -- 3/24
3 responses -- 3/26
- Homemade tooth setter and other things posted by: Rod Hays -- 3/22
2 responses -- 3/25
- Great Lakes Kiln Meeting April 24-25 posted by: Gene Wengert-WoodDoc -- 3/21
0 responses
NEKDA Spring Meeting - April 2&3 posted by: Bill Smith -- 3/20
0 responses
- when to saw blackwallnut posted by: Jerry -- 3/16
4 responses -- 3/18
- Cutting a 27'' Elm Log and other things. posted by: Rod Hays -- 3/15
1 response -- 3/15
- Charts or tables showing ratios between Sapwood and Heartwood? posted by: Keith Newton -- 3/14
0 responses
- EBAC Control unit posted by: Richard Barnes -- 3/12 --
1
1 response -- 5/2
- Here's how I sharpen my band blades by hand posted by: Rod Hays -- 3/10
6 responses -- 4/17
- Does anyone know of a resource of wood grain orientation and heavy beams? posted by: Sam -- 3/7
2 responses -- 3/8
- Kilns in West Michigan posted by: Derek Wolff -- 3/6
2 responses -- 5/2
- woodmizer 3500 sawmill posted by: vance -- 3/4
3 responses -- 4/2
- best wood for a slab cut on an old maple posted by: Harlan -- 2/28
3 responses -- 3/6
- VT Solar Kiln Course posted by: Brian Bond -- 2/27
0 responses
- I need a very basic sawmill that is relatively inexpensive posted by: Sam -- 2/27 --
1
13 responses -- 3/7
- cutting posted by: Bill -- 2/24
2 responses -- 2/25
- Second Log I've Cut with my Bandsawmill posted by: rod hays -- 2/20
9 responses -- 3/7
- Boring Beetle infestation posted by: Brad -- 2/20
1 response -- 2/21
- wood shrinkage calculator posted by: Bill Stuewe -- 2/18
2 responses -- 2/22
- My first log I've cut with my homebade bandsaw mill. posted by: Rod Hays -- 2/7
11 responses -- 2/21
- controlling the humidity in kilns posted by: Artie -- 2/7
1 response -- 2/7
- rough cut lumber price posted by: john -- 2/1
0 responses
- Drying and treating a hollow tree trunk. posted by: Keith Newton -- 2/1
0 responses
- Drying Pine posted by: dlahart -- 1/25
6 responses -- 1/29
- Older moisture meters-are they a good choice? posted by: Zachary Hoyt -- 1/23
2 responses -- 1/24
- what's the best wood near ocean posted by: robert -- 1/23 --
1
10 responses -- 5/2
- curve gang sawing posted by: bob -- 1/22
2 responses -- 1/30
- Drying SYP posted by: Vic -- 1/21
1 response -- 1/24
- air drying ash posted by: wayne -- 1/18
4 responses -- 4/7
- Kiln Newbie posted by: JoeWoody -- 1/18
5 responses -- 1/23
- Growing black locust in MN posted by: Brian Heller -- 1/16
6 responses -- 1/20
Need help with wood ID posted by: Zachary Hoyt -- 1/16
1 response -- 1/16
ash sawmill posted by: koritos -- 1/15
1 response -- 5/15
Start to complete posted by: Tennessee Tim -- 1/12
3 responses -- 1/28
Hybrid Kiln posted by: Henco Viljoen -- 1/12
2 responses -- 1/14
Drying bookmatched walnut slabs with 50 bullets cut in half. posted by: Logs To Lumber -- 1/12
4 responses -- 1/21
Check out this 52" maple log posted by: Logs To Lumber -- 1/9
4 responses -- 1/21
- Kiln Dry / wet and dry temperature to determine Relative Humidity posted by: Stephane -- 1/8
2 responses -- 3/25
- Best Bandmill for Long Timbers?? posted by: Wolfie -- 1/7
5 responses -- 1/25
- Got my homemade mill kind of running posted by: Rod Hays -- 1/5
6 responses -- 2/3
- Species for Wood Boat Engine Stringers? posted by: R. Michael Hubert -- 1/3
6 responses -- 1/21
- How straight should 10/4 oak be after drying posted by: B.H. Davis -- 1/3
3 responses -- 1/7
- WoodMaxx bandsaw blades posted by: Dave Miller -- 1/2 --
1
6 responses -- 6/8
- anchor seal posted by: john -- 1/1
4 responses -- 1/10
- RE: Cost of Producing Red Oak & White Oak posted by: Ken -- 12/21
6 responses -- 12/24
- ipe posted by: john -- 12/21
3 responses -- 12/22
- Ripping chain posted by: Kevin -- 12/19
9 responses -- 2/2
- Cabin wood species posted by: Christian -- 12/17
11 responses -- 1/5
- Dessicant Driven Dehumidifying Kiln? posted by: Edmund Russell -- 12/14
4 responses -- 12/16
Old sycamore posted by: Dave Boyt -- 12/13 -- 1
11 responses -- 1/25
- Black Walnut posted by: Steve McGuire -- 12/9
2 responses -- 12/10
Kiln Drying Workshop - Syracuse, Jan 6-9, 2014 posted by: Bill Smith -- 12/6
0 responses
- sawing and air drying ashe posted by: Gerald Yungling -- 12/3
4 responses -- 12/5
- cutting slabs posted by: Bruce -- 12/2
19 responses -- 12/28
- winter time sawing and stacking tips posted by: andy -- 11/30
2 responses -- 12/17
Buy & Sell Exchanges | Forums | Galleries | Other Resources | Site Map
Buy and Sell Exchanges
Job Opportunities and Services Exchange
Employment opportunities and services within the woodworking industry
Lumber Exchange
A worldwide buy/sell exchange for lumber and wood products
Machinery Exchange
A worldwide buyer and seller exchange for woodworking machinery and equipment.
Classified Ad Exchange
Classified advertising for the woodworking industry (for advertisements that do not include machinery, lumber products and employment listings)
Forums
Adhesives Forum
Discussing topics related to adhesives within the woodworking industry
Architectural Woodworking Forum
Discussing quality standards and production of architectural wood products
Business and Management Forum
A forum for the discussion of business topics: from sales and marketing to dealing with difficult customers.
Cabinet and Millwork Installation Forum
Discussing all aspects of installation issues encountered by cabinet and millwork installers.
Cabinetmaking Forum
Discussing 32mm and face frame cabinet construction including fabrication, casegoods design, and installation.
CAD Forum
Shedding light on the all-too-often shadowy world of CAD.
CNC Forum
Discussing CNC (computer numerically controlled) woodworking equipment, software, and automated product manufacturing.
Dust Collection, Safety and Plant Operation Forum
Discussing topics related to maintaining a safe and productive working environment.
Professional Finishing Forum
Finishing issues for the production environment
Forestry Forum
The science and art of forest cultivation and timber management, planting, surveying, tree diseases, silviculture and timber harvesting
Professional Furniture Making Forum
Helping professional furniture makers improve quality, save time, and increase profits
Laminating and Solid Surfacing Forum
Issues related to laminating and solid surface materials and processes
Commercial Kiln Drying Forum
Discussions covering issues faced be commercial drying operations that process at least 750,000 bd. ft. of lumber per year
Sawing and Drying Forum
Discussing topics related to primary processing and drying of lumber
Solid Wood Machining Forum
Discussing topics related to the machining of solid wood
Value Added Wood Products Forum
Learn how to improve your output, find new markets, and boost sales of your lumber products
Veneer Forum
Discussing topics related to veneer processing, manufacturing, and fabrication
WOODnetWORK
An electronic discussion group for woodworkers throughout the world
Galleries
Project Gallery
Where professional woodworkers can post examples of their work
Sawmill Gallery
Professional primary processing companies display and describe their sawmill facilities
Shop Gallery
Professional woodworkers display and describe their shop facilities, products and equipment
Shopbuilt Equipment Gallery
Professional woodworker's jigs, rigs, and shopbuilt equipment
Other Resources
Industry News
Late-breaking news from all sectors of the wood industry
Video Library
Index of industrial woodworking related digital videos on the web
Auctions, Sales and Special Offers
Advertisers offering woodworkers discounted prices on good and services, and announcements of upcoming auctions
FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards (return to top)
WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
A valid email return address must be included with each message.
Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
Subject lines may be edited for length and clarity.
"Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
Comments, questions, or criticisms regarding Forum policies should be directed to WOODWEB's Systems Administrator
(return to top).
Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.
You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.
WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.
Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).
Libel: Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.
Improper Decorum: Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).
Advertising: The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).
Repeated Forum Abuse:
Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.
There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).
The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)
Forum Posting Form Guidelines
|
Your Name
|
The name you enter in this field will be the name that appears with your post or response (return to form).
|
Your Website
|
Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
|
E-Mail Address
|
Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
|
Subject
|
Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
|
Thread Related Link and Image Guidelines
|
Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
|
Thread Related File Uploads
|
Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .FLV .MP4 (Image Upload Tips) If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
|
|
|
|