So I got it as a birthday present, and though I recognized that it was pretty cool when I opened the box, I am endlessly amazed at what it can do. A good chunk of my job involves sanding oddly shaped hard wood, by hand up to now.
Not only am I not devestating my arms anymore (hello popeye muscles) but the product is coming out immacualte, and even. No hand sand marks. Fast and good.
Anyone else using this? Or equivalent? Whole new world for me here, curious to see what anyone else is doing :)
You can fix one of those foamy pads to it and full on sand profiles and mouldings with it. Or get into corners. I've tried lots of different sanders and sanding products when i was refinishing antiques in my home shop. This thing blows the doors off anything else I've ever tried.
Pretty excited about it (probably means I need to get out more ;) ).
I got sick a few weeks ago and work fell behind. I ordered a dynabug while I was down knowing the first thing I had to come back to was finishing close to 100 drawer boxes (i hate sanding inside corners). I used a 1/2" foam pad and mirka abranet with vacuum...definitely a better way to work.
I have the small 3x4 SurfPrep and it works wonders for most things! I have the regular sheet paper for flat surfaces, thin dense foam pads, thin flexible foam and thick flexible foam pads. Depending on what you are trying to sand, these can save you a lot of time and aggravation. We have 6" air random orbit sanders for the large areas and use this small sanders for corners and details. A good investment in my opinion.
The square Surf Prep 3"x4" sander has been on my mind for a while now. Are you using the 1/2" thick Premium Red pads? Or another brand?How good is the durability of whatever pads you use? Would you say this is a good sander for just mainly moldings or is it good for cabinet doors too?? I mean can it really get into all the tight profiles of raised panels and door edges?
I am using the 1/2 thick red pads--but disclaimer, I'm a big cheapo in some ways. I stick on our (way cheaper) round sticky sand paper pads to it to extend them. If you are sanding profiles, you are mostly using the center of the center of the pad, so it's quick and dirty, but defo works.
As for super tight corner-in-profile reach, it's actually pretty good. Not folded paper rammed in the corner good, but nice and consistent enough to make it even better then that type of sanding, IMO.
And yes, you can totally sand a door panel with it. Because lets face it, sometimes you have to do it, and I think it's the best option, though I recognize that that is never fun to do.
Simple thing--butting up to a corner. I can't think of any other way to efficiently do this.
We are sanding small moulding, as small as 1/2" x 3/4". I just can't see keeping any kind of power sander flat enough (+/- .01* or so) to not burn through the edges. With just the pad you can feel and allow the weight of the pad and your hand keep it right.
We do have a profile sander that we could use for sanding between coats, but at this point we rarely do runs big enough to justify setting up for that.
But I would be willing to give it a try if you wanted to send me a demo unit.
We use the 5mm Very Fine for sanding back sealer with the 3" x 4" RO, and hit the edges with the same pads by hand. You can just bend the pads to hit the edges without burning through the edges. Good stuff.
FORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards(return to top)
WOODWEB is a professional industrial woodworking site. Hobbyist and homeowner woodworking questions are inappropriate.
Messages should be kept reasonably short and on topic, relating to the focus of the forum. Responses should relate to the original question.
A valid email return address must be included with each message.
Advertising is inappropriate. The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. When posting listings in these areas, review the posting instructions carefully.
Subject lines may be edited for length and clarity.
"Cross posting" is not permitted. Choose the best forum for your question, and post your question at one forum only.
Messages requesting private responses will be removed - Forums are designed to provide information and assistance for all of our visitors. Private response requests are appropriate at WOODWEB's Exchanges and Job Opportunities and Services.
Messages that accuse businesses or individuals of alleged negative actions or behavior are inappropriate since WOODWEB is unable to verify or substantiate the claims.
Posts with the intent of soliciting answers to surveys are not appropriate. Contact WOODWEB for more information on initiating a survey.
Excessive forum participation by an individual upsets the balance of a healthy forum atmosphere. Individuals who excessively post responses containing marginal content will be considered repeat forum abusers.
Responses that initiate or support inappropriate and off-topic discussion of general politics detract from the professional woodworking focus of WOODWEB, and will be removed.
Participants are encouraged to use their real name when posting. Intentionally using another persons name is prohibited, and posts of this nature will be removed at WOODWEB's discretion.
Carefully review your message before clicking on the "Send Message" button - you will not be able to revise the message once it has been sent.
You will be notified of responses to the message(s) you posted via email. Be sure to enter your email address correctly.
WOODWEB's forums are a highly regarded resource for professional woodworkers. Messages and responses that are crafted in a professional and civil manner strengthen this resource. Messages that do not reflect a professional tone reduce the value of our forums.
Messages are inappropriate when their content: is deemed libelous in nature or is based on rumor, fails to meet basic standards of decorum, contains blatant advertising or inappropriate emphasis on self promotion (return to top).
Libel: Posts which defame an individual or organization, or employ a tone which can be viewed as malicious in nature. Words, pictures, or cartoons which expose a person or organization to public hatred, shame, disgrace, or ridicule, or induce an ill opinion of a person or organization, are libelous.
Improper Decorum: Posts which are profane, inciting, disrespectful or uncivil in tone, or maliciously worded. This also includes the venting of unsubstantiated opinions. Such messages do little to illuminate a given topic, and often have the opposite effect. Constructive criticism is acceptable (return to top).
Advertising: The purpose of WOODWEB Forums is to provide answers, not an advertising venue. Companies participating in a Forum discussion should provide specific answers to posted questions. WOODWEB suggests that businesses include an appropriately crafted signature in order to identify their company. A well meaning post that seems to be on-topic but contains a product reference may do your business more harm than good in the Forum environment. Forum users may perceive your references to specific products as unsolicited advertising (spam) and consciously avoid your web site or services. A well-crafted signature is an appropriate way to advertise your services that will not offend potential customers. Signatures should be limited to 4-6 lines, and may contain information that identifies the type of business you're in, your URL and email address (return to top).
Repeated Forum Abuse:
Forum participants who repeatedly fail to follow WOODWEB's Forum Guidelines may encounter difficulty when attempting to post messages.
There are often situations when the original message asks for opinions: "What is the best widget for my type of shop?". To a certain extent, the person posting the message is responsible for including specific questions within the message. An open ended question (like the one above) invites responses that may read as sales pitches. WOODWEB suggests that companies responding to such a question provide detailed and substantive replies rather than responses that read as a one-sided product promotion. It has been WOODWEB's experience that substantive responses are held in higher regard by our readers (return to top).
The staff of WOODWEB assume no responsibility for the accuracy, content, or outcome of any posting transmitted at WOODWEB's Message Boards. Participants should undertake the use of machinery, materials and methods discussed at WOODWEB's Message Boards after considerate evaluation, and at their own risk. WOODWEB reserves the right to delete any messages it deems inappropriate. (return to top)
Forum Posting Form Guidelines
The name you enter in this field will be the name that appears with your post or response (return to form).
Personal or business website links must point to the author's website. Inappropriate links will be removed without notice, and at WOODWEB's sole discretion. WOODWEB reserves the right to delete any messages with links it deems inappropriate. (return to form)
Your e-mail address will not be publicly viewable. Forum participants will be able to contact you using a contact link (included with your post) that is substituted for your actual address. You must include a valid email address in this field. (return to form)
Subject may be edited for length and clarity. Subject lines should provide an indication of the content of your post. (return to form)
Thread Related Link and Image Guidelines
Thread Related Links posted at WOODWEB's Forums and Exchanges should point to locations that provide supporting information for the topic being discussed in the current message thread. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related Link that directs visitors to an area with inappropriate content will be removed. WOODWEB reserves the right to delete any messages with links or images it deems inappropriate. (return to form)
Thread Related File Uploads
Thread Related Files posted at WOODWEB's Forums and Exchanges should provide supporting information for the topic being discussed in the current message thread. Video Files: acceptable video formats are: .MOV .AVI .WMV .MPEG .MPG .FLV .MP4 (Image Upload Tips) If you encounter any difficulty when uploading video files, E-mail WOODWEB for assistance. The purpose of WOODWEB Forums is to provide answers, not to serve as an advertising venue. A Thread Related File that contains inappropriate content will be removed, and uploaded files that are not directly related to the message thread will be removed. WOODWEB reserves the right to delete any messages with links, files, or images it deems inappropriate. (return to form)
The editors, writers, and staff at WOODWEB try to promote safe practices.
What is safe for one woodworker under certain conditions may not be safe
for others in different circumstances. Readers should undertake the use
of materials and methods discussed at WOODWEB after considerate evaluation,
and at their own risk.