|Home » Forums » Veneer Forum » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
suggest some pressing tricks for veneer having thickness variation.3/15
Dear all please give me suggestion for pressing the ziricote veneer having thickness variation nearer to crown area my problem is: due to thickness variation in material veneer dose not stick to plywood if their is any trick for pasting veneer plz know me otherwise suggest some indian supplier of pressing pad,
I have used canvas purchased from an awning supply company. We sandwiched it between the platen and the mylar on our feed through hot press. Hope this helps,
Thanks David. i will try canvas also. I am having one anther option of Silicone Rubber Press Pad, will it work or not? and what are the future problems for using this kind of pads.
Canvas work. Also more pressure if ya got it.
We supply a press pad which is a felt pad with a canvas backing. These are quite popular but they are pricey.
oh....John thanks, i am looking for you. their is one another important product on your web site that is veneer softener so please send me technical data sheet of both product then i will send the requirement.
I have used india or gum rubber placed directly on the veneer being pressed. Also a slightly thicker glue line.