• Knowledge Base Search Results: There were no Knowledge Base Results for this search term
  • Forum Messages Search Results: 2991
  • Your search for woodweb found 89562 documents (of 100947 searched).
    16401-19400 of the 89562 results are displayed below.
      


    Knowledge Base Results:

    There were no Knowledge Base Results for this search term

      ---   Return to Top   ---   View More Results   


    Forum Results:

    Re: Finishing AC Plywood
    A message posted at WOODWEB's Finishing Forum (6/27) -- Gary, It can take multiple coats of WB finish to seal the wood completely - depending on the ...

    Oversize 3/4" mdf doors
    A message posted at WOODWEB's Architectural Woodworking Forum (6/27) -- I have recently have jobs where the design calls for 3/4" painted MDF sl ...

    Re: holytek planer won't close
    A message posted at WOODWEB's Furniture Making Forum (6/27) -- We had a similar problem at my old shop with a widebelt sander. The automatic thicknes ...

    Re: Photo design question
    A message posted at WOODWEB's CAD Forum (6/27) -- Oh, you are looking for a simple photo software instead of some professional photo processing softw ...

    Re: Beaded Inset Door Thickness & Non-Mortise Hinges
    A message posted at WOODWEB's Cabinetmaking Forum (6/27) -- Amerock makes the original non-mortise hinges that look like those Haefele ones. They are ...

    Re: Insurance?
    A message posted at WOODWEB's Business and Management Forum (6/27) -- I pay $1200/yr for $1 million in general liability and $200k in business proper ...

    Therm O Web Laminating system
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/27) -- Are there any users of this laminating system that care to share their o ...

    Re: Scientific Management of High-Variety, Complex Production
    A message posted at WOODWEB's Business and Management Forum (6/27) -- I am sorry, Tony. By mistake, I addressed you as Ron. ...

    Re: Applying finish to Oak plywood
    A message posted at WOODWEB's Finishing Forum (6/27) -- 20 years with ML Campbell, now making the switch to Sherwin Williams Water Borne ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/27) -- All of you who are criticizing Mel: What's your problem with her wondering how ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/27) -- Mel, You are taking this too personal. I sell all my work retail. I don't sell ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/27) -- "I don't think there's any inherent virtue in doing donkey work without th ...

    Buying a jointer: SCMI vs. Delta Invicta
    A message posted at WOODWEB's Solid Wood Machining Forum (6/27) -- I'm in the market for a new jointer. We are a group woodshop in NYC. There's alrea ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/27) -- Thanks Paul--I've been seriously wondering what is so evil about this question. ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/27) -- As a business owner, the thing I value most in an employee is the ability to do ...

    Re: Buying a jointer: SCMI vs. Delta Invicta
    A message posted at WOODWEB's Solid Wood Machining Forum (6/27) -- If you are planning to upgrade the butterhead anyway why aren't you looking at old ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/27) -- Mel, we have come to a Y in the road , you have told us how talented and skille ...

    Re: New CNC offsetting approaching 90 degree corners
    A message posted at WOODWEB's CNC Forum (6/27) -- Read the code first and see if there is an offset there. But what you said about slowing down and h ...

    Re: Improving Information Flow
    A message posted at WOODWEB's Business and Management Forum (6/27) -- Take ba y steps. Pick one thing and work on that. Start with a short daily meet ...

    Re: Attaching large square table top
    A message posted at WOODWEB's Furniture Making Forum (6/27) -- I made my table out of three boards from the same 26" wide mahogany board. The gr ...

    Re: Vcarve and Weeke
    A message posted at WOODWEB's CNC Forum (6/27) -- You can go to the site and download the demo full work version to test your machine and post proces ...

    Re: Grizzly
    A message posted at WOODWEB's WOODnetWORK Forum (6/27) -- It would help to know some specifcs. How many people in your shop? what are you making? are ...

    Re: Charcoal grey spray stain???
    A message posted at WOODWEB's Cabinetmaking Forum (6/27) -- We used to mix all our own stains no problem , but when we came to a Grey stain we used U ...

    Re: Attaching large square table top
    A message posted at WOODWEB's Furniture Making Forum (6/27) -- I guess I forgot to mention that I used a plunge router to stop the sliding dovetail c ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/27) -- @Paul The answer to your question is no. You either respond to customer needs o ...

    Re: Routed MDF Doors
    A message posted at WOODWEB's CNC Forum (6/27) -- For a 1 piece door with a flat recessed panel, we run about 1 hour per sheet, and average about 10 ...

    Re: CMS idea 150 or power 5 axis
    A message posted at WOODWEB's CNC Forum (6/27) -- How close is your dealer? How many of these does he have in the field? Talk to those who are using ...

    Re: Walnut photo sensitivity
    A message posted at WOODWEB's Furniture Making Forum (6/27) -- Thanks John. An employee of mine tells me that he had the same problem on a job he wor ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/27) -- Wow Paul, that's a great article. I would personally never expect that much out ...

    Re: Magnamax or Resistant
    A message posted at WOODWEB's Finishing Forum (6/27) -- 2nd No on Magnamax for kitchens. CV is the KCMA standard. Magnamax is for built-ins and/or ca ...

    Re: Attaching large square table top
    A message posted at WOODWEB's Furniture Making Forum (6/27) -- David sochar should chime in here. I think he has done a good bit of this type of furn ...

    Re: Red Oak for Barn Siding
    A message posted at WOODWEB's Sawing and Drying Forum (6/27) -- I put some red oak boxing on the side of my barn in 1983,still doing fine. ...

    Grizzly
    A message posted at WOODWEB's WOODnetWORK Forum (6/27) -- I am thinking of buying Grizzly tools for my new wood shop. What do people think of that br ...

    Re: Is eCabinets keeping up with the times?
    A message posted at WOODWEB's CNC Forum (6/27) -- SNX? Don't bring that puppy to a real dog fight. ...

    range hood cab design
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/27) -- I am working on a design for a kitchen and am looking for any design ...

    Re: shelix problem--
    A message posted at WOODWEB's Solid Wood Machining Forum (6/27) -- I do not have a Byrd Shelix head but I do have 3 machines with multiple insert car ...

    RE: Planer Knives Sharpening
    A message posted at WOODWEB's Solid Wood Machining Forum (6/27) -- We have a Delta Rockwell 18" Planer. This planer has 3 long knives, which are ...

    Steel City 15" belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (6/27) -- I am looking at buying a steel city 15" open end sander for sanding shop cut ...

    SCMI Shaper spindle
    A message posted at WOODWEB's Solid Wood Machining Forum (6/27) -- I have a late 80's T-130. Somehow, while trying to loosen the spindle nut to chang ...

    Re: Wide belt sander oscillation cylinder?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/27) -- Hopefully you have located this cylinder by now...? Holz-Her (704 ...

    Metric Spindles for an SCMI spindle sander
    A message posted at WOODWEB's Solid Wood Machining Forum (6/27) -- Hi all, I have an SCMI Unilev edge sander (which I absolutely love!). It has the o ...

    Re: Bagging and Selling Sawdust
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/27) -- We had been selling it for $65 for a trailer (8x10x5') load, deli ...

    Re: screws in mdf
    A message posted at WOODWEB's Furniture Making Forum (6/27) -- Your answer of 100 tables implies a commercial job. Better make sure you liability ins ...

    How to make a 1/8" x 1/8" strip
    A message posted at WOODWEB's WOODnetWORK Forum (6/27) -- I'm trying to make 1/8" x 1/8" x 30" wood strips, and am having some trouble ...

    screws in mdf
    A message posted at WOODWEB's Furniture Making Forum (6/27) -- I've been asked to make some simple tables in MDF. Just a simple mdf top, with screw o ...

    Re: screws in mdf
    A message posted at WOODWEB's Furniture Making Forum (6/27) -- Rich, Those are valid points and I'm glad you pointed them out because I never would h ...

    Re: screws in mdf
    A message posted at WOODWEB's Furniture Making Forum (6/27) -- You could countersink through the top and use nuts under . If any legs screwed to the ...

    Re: screws in mdf
    A message posted at WOODWEB's Furniture Making Forum (6/27) -- Cool it, Chewy. Not everything is durable. You seem to be describing a design that is ...

    Re: screws in mdf
    A message posted at WOODWEB's Furniture Making Forum (6/27) -- D Brown, I did consider using some slightly over-sized pieces of hardwood (maybe 1/4&q ...

    Re: screws in mdf
    A message posted at WOODWEB's Furniture Making Forum (6/27) -- You could glue a wood or plywood block to the underside of the mdf and fasten your leg ...

    Re: Finishing issue - light specks in grain
    A message posted at WOODWEB's Finishing Forum (5/27/23) -- First off. 220gt is too fine. A tack rag on raw wood/finish is a bad idea. It's not sawdus ...

    Re: Press
    A message posted at WOODWEB's Adhesives Forum (5/27/23) -- How fast do you want to press? I press at 60 deg C for 10 minutes. You can press faster bu ...

    Walnut sap
    A message posted at WOODWEB's Cabinetmaking Forum (5/27/23) -- Preparing up several pieces of Walnut Wainscoting it has a little sap wood, I the past ...

    Press
    A message posted at WOODWEB's Adhesives Forum (5/27/23) -- Hello all I am new here. I just purchased a cold/hot press by SCM and wanted to know when ...

    Re: Shelf pin holes
    A message posted at WOODWEB's Cabinetmaking Forum (5/27/23) -- Same here, getting a batch of pins that are slightly smaller does happen. We use a CNC ...

    Re: Shelf pin holes
    A message posted at WOODWEB's Cabinetmaking Forum (5/27/23) -- Shouldn't a 5mm drill make a 5mm hole so the 4.95mm pin fits nice? I know my 1/4" ...

    Re: Floating shelves
    A message posted at WOODWEB's Cabinetmaking Forum (5/27/23) -- This is a nice system that I have used. called Hovr ...

    Re: Finishing issue - light specks in grain
    A message posted at WOODWEB's Finishing Forum (5/27/23) -- Just a low grade birch plywood ...

    Re: Shelf pin holes
    A message posted at WOODWEB's Cabinetmaking Forum (5/27/23) -- What brand of bits and what brand of pin? ...

    Re: Scratch
    A message posted at WOODWEB's Finishing Forum (5/27/23) -- It all depends on how bad is it. ...

    Re: lumber warping as it is ripped
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27/22) -- Both sides here but pretty much agree with David with regards to severe mo ...

    Graco Merkur pump
    A message posted at WOODWEB's Finishing Forum (5/27/22) -- Just an update on a post that I started a while back I purchased a Graco pump back in Nove ...

    Re: CNC drill through HPL
    A message posted at WOODWEB's CNC Forum (5/27/22) -- I dont know about 3/4" but with smaller holes if Im trying to get a really clean hole (no b ...

    User friendly kitchen cad program for website.
    A message posted at WOODWEB's Business and Management Forum (5/27/22) -- Hi guys and gals. We are working on a website where customers can draw their ...

    Hook angle vs cutting angle results?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/27/22) -- If I have a vertical cutterhead in a moulder with a 20 degree hook cut angle wi ...

    CNC drill through HPL
    A message posted at WOODWEB's CNC Forum (5/27/22) -- Hello there, I have gotten loads of information from the site and thought I would try my luck wi ...

    Re: CNC drill through HPL
    A message posted at WOODWEB's CNC Forum (5/27/22) -- Not to argue with Dropout but an interpolated hole is not drilling with a "router bit" ...

    Re: CNC drill through HPL
    A message posted at WOODWEB's CNC Forum (5/27/22) -- Mark B is correct. I tend to drill first because you can't get the feed rate high enough for a d ...

    Relaminating Teller Counters On Site
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/27/22) -- IT IS REALLY VERY TRICKY FOR ME. I WAS TRYING TO COME UP WITH A PRICE ...

    Re: Hook angle vs cutting angle results?
    A message posted at WOODWEB's Solid Wood Machining Forum (5/27/22) -- The hook angle only has to do with proper geometry to make the cut with the lea ...

    Re: CNC drill through HPL
    A message posted at WOODWEB's CNC Forum (5/27/22) -- I'd suggest a 3/8" uncut spiral router bit in a spiral down program that starts in the midd ...

    Re: CNC drill through HPL
    A message posted at WOODWEB's CNC Forum (5/27/22) -- Any tool in the changer, even a half inch compression with an interpolated hole would work. The ...

    Re: CNC drill through HPL
    A message posted at WOODWEB's CNC Forum (5/27/22) -- Thanks alls, I am running AI center, with RouterCAD producing the G-Code. I have a couple of sam ...

    Re: Graco Merkur pump
    A message posted at WOODWEB's Finishing Forum (5/27/22) -- Sorry for your bad luck, nothing like being that person that gets a lemon. I know a guy wh ...

    Re: CNC drill through HPL
    A message posted at WOODWEB's CNC Forum (5/27/22) -- Don't like drilling with a router bit. Hard on everything. Drill the hole first with a 1/2 v poi ...

    Re: User friendly kitchen cad program for website.
    A message posted at WOODWEB's Business and Management Forum (5/27/22) -- You don't think you will have to redesign everything after they make an atte ...

    Re: Cutting thick plywood
    A message posted at WOODWEB's CNC Forum (5/27/22) -- Just straight ply? No face veneer or laminate? That doesnt seem like a tough thing to nail down. ...

    Cutting thick plywood
    A message posted at WOODWEB's CNC Forum (5/27/22) -- Tell me please, which cutter is best to cut plywood 30mm? you need to cut a lot and I can't find ...

    Re: Cutting thick plywood
    A message posted at WOODWEB's CNC Forum (5/27/22) -- Tell us what size CNC you have. For a full size CNC, 30mm is no issue. ...

    Re: Live Oak Sandbox - Rot Resistance and Drying
    A message posted at WOODWEB's Sawing and Drying Forum (5/27/22) -- Use PVC lumber ...

    Re: making 6x6 fence posts
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- 1. do I need to cut the 6x6 out of the center of the log to ensure the post stays str ...

    Re: Low profile slotter
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- What quality does the kerf have to be? I can imagine any type of recip (sawza ...

    making 6x6 fence posts
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- hi guys, first post.....i’m going to be sawmilling some 6x6 fence posts for a 4 line ...

    Removing sticky sawdust off SYP lumber?
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- I'm normally sawing hardwood with my Woodmizer LT15 but I've had some large SYP trees ...

    Re: Low profile slotter
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- Bernie: Unless you have hundreds of these to do, I think what I might do is t ...

    Re: Removing sticky sawdust off SYP lumber?
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- Have you tried ripper blades from Jerry's resharp? Man... ran a bunch of them and the ...

    CNC Author 427 (NUM1040 Controller) Xilog plus _PnelMAC Need Help!!!
    A message posted at WOODWEB's CNC Forum (5/27) -- i have a problem on CNC AUTHOR 427 with NUM 1040 Controller I Replaced the PC OF CNC Machine and in ...

    Rubbed out lacquer finish
    A message posted at WOODWEB's Finishing Forum (5/27) -- Is anyone still shooting nitro 550 voc, and is anyone rubbing it out. I have a lot of questio ...

    Re: making 6x6 fence posts
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- Mark, so do I cut so the heart is eliminated? or at least along the side of the post? ...

    Vitap
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- I read several posts regarding guys calling different companies asking questions about th ...

    Re: Low profile slotter
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- I have seen someone grind the tang from a Japanese saw to fit the recip, then ...

    Re: Maybe a dumb question?
    A message posted at WOODWEB's Finishing Forum (5/27) -- Post cat finish like conversion varnish can be refrigerated to prolong the life of the cataly ...

    Re: RE: Best Chainsaw for Ripping Logs
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- Mark B. When the OP says he has up to $1,000 for a sawmill, I don't think he will hav ...

    Re: making 6x6 fence posts
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- also, it seems like every time I have ever looked at. store bought (Lowe’s, Home depo ...

    Re: making 6x6 fence posts
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- Why do you need really straight fence posts? Also why 6x6s? Are you trying to keep bi ...

    Re: Low profile slotter
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- I'm sure you already know to clamp a wood guide to the post and then use a Fe ...

    Re: Low profile slotter
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- You could try a jamb saw, or a fein tool on top of a spacer. ...

    Re: Low profile slotter
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- An offset base on a trim router might work. ...

    Re: Straining gallon plus size
    A message posted at WOODWEB's Finishing Forum (5/27) -- I just rinse in the sink? ...

    Re: CabinetVision VS Mozaik
    A message posted at WOODWEB's CAD Forum (5/27) -- I have Cabinet Vision Ultimate. It is very expensive as far as I'm concerned. Once it is purchased, ...

    Re: Technical advice for an arc cut of large radius
    A message posted at WOODWEB's Furniture Making Forum (5/27) -- A couple of things I have done, is to bend a thin batten between to nails while pushin ...

    Machinery support/service
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Does anyone else have as much trouble as I do finding service techs in your are ...

    Re: Dehumidifier or AC?
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- I used a cheap DH in my 275 bf capacity kiln for 20 years w/o problems, but I only pu ...

    Re: Machinery support/service
    A message posted at WOODWEB's Business and Management Forum (5/27) -- I would think that SCM would have someone local, have you asked? I know that Bi ...

    Re: Technical advice for an arc cut of large radius
    A message posted at WOODWEB's Furniture Making Forum (5/27) -- Find someone with a cnc and go over with a sheet or scrap of baltic birch. Have them c ...

    Re: Flat table nesting routers
    A message posted at WOODWEB's CNC Forum (5/27) -- I have, but it always seemed to me that they are built cheap, maybe I'm wrong, we've been running a ...

    Re: Technical advice for an arc cut of large radius
    A message posted at WOODWEB's Furniture Making Forum (5/27) -- Take your frame to a CNC shop and have them cut it. I've made up to 12' trammels. 1/4& ...

    Re: lease renewal
    A message posted at WOODWEB's Business and Management Forum (5/27) -- With mortgage rates down and the number of buyers increasing the economy should ...

    Re: CabinetVision VS Mozaik
    A message posted at WOODWEB's CAD Forum (5/27) -- You can try Moziak for 90 days initially, Inexpensive way to find out,, if it is not what you want ...

    Pratix s15 issues
    A message posted at WOODWEB's CNC Forum (5/27) -- I can't seem to get my machine to put the tools back into the tool catalog in MDI mode without gett ...

    Re: CabinetVision VS Mozaik
    A message posted at WOODWEB's CAD Forum (5/27) -- You might take a look at Cabinet Sense, it was $100 to try for 3 months with fantastic support on q ...

    Re: lease renewal
    A message posted at WOODWEB's Business and Management Forum (5/27) -- I would give him the 3 year lease but request a clause to cancel it with a 60 d ...

    Re: Technical advice for an arc cut of large radius
    A message posted at WOODWEB's Furniture Making Forum (5/27) -- Bandsaw the curve. Edge sander or spoke shave to clean up. That would take about 15-20 ...

    Re: CabinetVision VS Mozaik
    A message posted at WOODWEB's CAD Forum (5/27) -- I agree with James. Just give Mozaik a try. Cheap but valuable research, if it won't work then try ...

    Re: Pratix s15 issues
    A message posted at WOODWEB's CNC Forum (5/27) -- What is the text of the Plc 62? ...

    Re: Sliding table saw vs CNC
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- I’m a CNC guy. Never had a slider but I did have 2 different beam saws. I converted my po ...

    Re: Need advice Crotch Mahogany Conference table
    A message posted at WOODWEB's Veneer Forum (5/27) -- If you have reservations about your results, don't experiment on the final project. See if your ...

    Re: Castle Tsm 20 pocket machine issues
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- I fixed the castle tsm 20 by using a Makita 1.25 hp router which is 128 thousands smaller ...

    Re: taping off prefinish interiors for painting
    A message posted at WOODWEB's Finishing Forum (5/27) -- We stopped masking as soon as the good Columbia prefinished ply was available. Maybe 2005? We ...

    Re: Sliding table saw vs CNC
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- For what your doing - cutting melamine, get a slider. For your 15k budget you could get a ...

    Re: Need advice Crotch Mahogany Conference table
    A message posted at WOODWEB's Veneer Forum (5/27) -- Duster, that's a great looking Armoire. Did you do the legs ? I wouldn't hesitate to lay panels ...

    Re: Need advice Crotch Mahogany Conference table
    A message posted at WOODWEB's Veneer Forum (5/27) -- Don - thanks for the compliment, I've alway thought that armoire was a pretty cool piece. I did ...

    Re: Sliding table saw vs CNC
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- Eventually you're going to want to get a reliable CNC. If I were in your shoes, I wouldn' ...

    Re: Sliding table saw vs CNC
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- I do most of my cutting on an older Striebig. I like it. Built like a tank and cuts very ...

    Re: Sliding table saw vs CNC
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- I have two sliders and half a dozen deltas and Sawstops, all have a reason and get used d ...

    Re: Pods for flat table
    A message posted at WOODWEB's CNC Forum (5/27) -- Here is a picture of a few I have made to give you some other ideas. I am sure you will have a tabl ...

    Re: Castle Tsm 20 pocket machine issues
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- Thanks Mike, I sent an email off to castle with a link to this page, maybe they will resp ...

    spraying 2k poly
    A message posted at WOODWEB's Finishing Forum (5/27) -- Need to spray ML campbells Polarian for the first time. Anyone have suggestions on tip sizes ...

    Re: Fixing SCM Basic 1 edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- If you have any diagrams on how to properly remove the pot and heater, please pass them o ...

    Re: Sliding table saw vs CNC
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- If I had it to do over again. I'd start with a cnc and an edge bander. You can pay for ev ...

    Re: Sliding table saw vs CNC
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- I'd get a vertical panel saw with scoring. Got to be a lot of them out there collecting d ...

    Re: Castle Tsm 20 pocket machine issues
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- very good Ray & with pics. as i said earlier there is no such thing as can't. ...

    Re: Looking for tooling recommendations for CNC router
    A message posted at WOODWEB's CNC Forum (5/27) -- After trying a variety of tooling companies we settled on LMT Onsurd and have been using their Mara ...

    Re: File Management
    A message posted at WOODWEB's CNC Forum (5/27) -- On the cnc, we delete output files on a quarterly basis. We go back and delete from the previous qu ...

    Re: bending particle board
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- Your solution sounds fine. We have a 5x10' vacuum table that I would use for ...

    Re: File Management
    A message posted at WOODWEB's CNC Forum (5/27) -- In my opinion delete nothing. I have a spring clean about 4 times a year. For repeat orders I know ...

    Re: Movento vs. Tandem
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- I usually use Tandems but have used Movento on a couple of occasions. The Movento specs c ...

    Re: Manufacturing Process details
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- Go to the Gemba and watch whats going on. Sorry but we have no idea what you are doing or ...

    Re: Stripes in Finish
    A message posted at WOODWEB's Finishing Forum (5/27) -- Did you do a series of fan pattern tests by just pulling the trigger into a piece of brown pa ...

    shop carts
    A message posted at WOODWEB's Finishing Forum (5/27) -- I'm looking for a vendor for sturdy yet simple carts for rolling 2"× 30"×6' to 2&qu ...

    Parametric software for single parts
    A message posted at WOODWEB's CAD Forum (5/27) -- I need some help finding a software program that will export dxf files into enroute. I don't need a ...

    Re: Vacuum Receiver tank
    A message posted at WOODWEB's CNC Forum (5/27) -- We've got a 40 HP Quincy screw on a 5 x 10, No tank. I've never seen a tank used in over 20 years o ...

    Re: What is the best glue and application method for lock mitre joints
    A message posted at WOODWEB's Adhesives Forum (5/27) -- Are you really serious about asking this or just normal post you making? Anyway, you got the ...

    Re: Moisture Content Variations Between Boards
    A message posted at WOODWEB's Adhesives Forum (5/27) -- You will be fine if your wood is between 8-10%. I never had an issue with it. maybe you need ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- having glued tons of ipe with TTIII never had a failure even when doing curved treads hav ...

    Re: Manufacturing Process details
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- "In business, genba refers to the place where value is created; in manufacturing the ...

    Re: I know I'm crazy but....
    A message posted at WOODWEB's Adhesives Forum (5/27) -- matt, that is a pretty job your friend did... WHich glue is he using, I got some ply and want ...

    Re: Manufacturing End Grain Block Flooring??
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- You might want to add a few details. Like what size blocks and species. ...

    Re: What glue for LongLeaf Heart Pine?
    A message posted at WOODWEB's Adhesives Forum (5/27) -- You've already made the right choice TBII and TBIII will work perfectly. ...

    Re: looking machine data flappy for bieses rover 18
    A message posted at WOODWEB's CNC Forum (5/27) -- did you try call biesse ? you need to provide your controller version. ...

    Re: how to choose a hot melt glue for edgebander
    A message posted at WOODWEB's Adhesives Forum (5/27) -- Get a KS205...Ask your supplier about it. ...

    Re: Vacuum Receiver tank
    A message posted at WOODWEB's CNC Forum (5/27) -- Thanks Larry. We are going to plumb it in without it and see what happens. ...

    Re: bending particle board
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- Why don't you try kerfing the mdf. ...

    Re: Hydraulic Shop Press For Gluing
    A message posted at WOODWEB's Adhesives Forum (5/27) -- The jack may leak off with time. ...

    Re: Parametric software for single parts
    A message posted at WOODWEB's CAD Forum (5/27) -- I call the guys at CAD Code. ...

    Re: New jointer or get a spiral for the old one?
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- I couldn't do our work without a 8" or longer jointer. My original Delta DJ-20 is mo ...

    Transitioning from one bander to another
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- Hi all, I have owned a Cehisa ep9 bander for the past 13 years and it has worked very wel ...

    Re: New jointer or get a spiral for the old one?
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- i bought the dispoza blade set up for my eight inch jointer and when i installed them and ...

    Re: Pay increase evaluations
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Something you may consider doing is giving this person bonuses rather than peri ...

    Re: New jointer or get a spiral for the old one?
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- I have changed out my 15 inch planer blades to spiral and well worth it, what a differenc ...

    Re: Looking for this Slide Hardware Setup
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- These were pretty generic slides used by larger manufacturers (Merilat, Aristokraft etc.. ...

    New panel saw blades
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- Hello, Been reading on this sight for over 10 years! Have a situation, I run a slider saw ...

    Re: New jointer or get a spiral for the old one?
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- I got rid of my 8” Powermatic jointer long ago and never really missed it. About a year a ...

    Re: Looking for this Slide Hardware Setup
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- I have had similar requests in the past. This guide holder in the back of cabinet is the ...

    handling of tools
    A message posted at WOODWEB's Business and Management Forum (5/27) -- I was courious how you guys hadle the way tools are handled. Do make the employ ...

    Re: handling of tools
    A message posted at WOODWEB's Business and Management Forum (5/27) -- We buy all tools. Each station has a standard set. All very high quality. It is ...

    Re: New jointer or get a spiral for the old one?
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- Grizzly, at least, is well named. I had one of their jointers once that stayed pretty tru ...

    Re: Pay increase evaluations
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Have you asked him what is going on, what his long term goals are, can he be sa ...

    Re: New jointer or get a spiral for the old one?
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- I say get a set of carbide tipped knives from CG Schmidt and call it a day. Im running mi ...

    Re: Laminate to Melamine
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- So by balanced I would need the same laminate on both sides correct? Or some way to preve ...

    Re: Laminate to Melamine
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- Technically it should be the same thickness material. If not exposed you can accomplish t ...

    Re: Pay increase evaluations
    A message posted at WOODWEB's Business and Management Forum (5/27) -- I agree with the bonus theroy. Beware some employees get thinking they are goin ...

    Re: kremlin replacement oring part #
    A message posted at WOODWEB's Finishing Forum (5/27) -- If no one has it, I will go down to my shop tomorrow and find my Kremlin book. I have the sam ...

    kremlin replacement oring part #
    A message posted at WOODWEB's Finishing Forum (5/27) -- anyone know the part number to the inner ring(smaller) on the kremlin excite spray gun? thx ...

    Re: New jointer or get a spiral for the old one?
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- Get a grizzly with spiral head. You won't believe the difference . ...

    Re: Autocad 2017 with a surface book
    A message posted at WOODWEB's CAD Forum (5/27) -- Tom, I'm finally getting back to this. See how small my icons are? How do i get them bigger? ...

    Re: Freight Shipping
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Modern Artist nailed it. If you have pride in your cabinets and want to ship th ...

    Re: Freight Shipping
    A message posted at WOODWEB's Business and Management Forum (5/27) -- I ship large freight out all the time. I use FreightQuote and Unishippers curre ...

    Re: why is my butternut sapwood really hard & dark
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- This piece is just part of a branch that fell off in a storm I have more of it that w ...

    Re: why is my butternut sapwood really hard & dark
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- You assume much when you attempt to refute a comment I made, one which is based on de ...

    Re: why is my butternut sapwood really hard & dark
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- This is a google search on spalted butternut for the one(s) who say it's firewood. Ja ...

    Re: why is my butternut sapwood really hard & dark
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- When wood is first harvested, the sapwood contains many sugars. These sugars are attr ...

    Reliable shop miter saws?
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- Good day Gents, I'm asking for opinions/experience on what you consider the most reliable ...

    RE: Grizzly Drum Sander-- Rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (5/27) -- We recently purchased a used Grizzly G1079 Drum Sander. When researching how a san ...

    Re: 23 gauge nail guns jaming
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/27) -- I find I need to crank up the pressure for 2" pins. You have to ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/27) -- and id also like to add that Rich is correct as well.. stick with the same manufacturer. in t ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/27) -- i didnt want to commentat first due to the proposed use of minwax .......... but the above po ...

    Re: Zargen drawers
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- Brent, You are asking a question that is pretty much impossible to answer here in a few s ...

    Re: why is my butternut sapwood really hard & dark
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- Given how small the pieces are, plus the extensive rot, it's minimally acceptable as ...

    Schelling beam saw and scraps
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- We have had a problem with our Schelling beam saw. When a small piece of scrap falls into ...

    Finishing
    A message posted at WOODWEB's Finishing Forum (5/27) -- I am looking for an exterior top coat that I can spray on a sign. The MDO board was primed an ...

    Re: Improving Information Flow
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Many years ago I worked in the trucking industry. Our Terminal Manager and I (h ...

    Re: Your opinion please
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Purchasing a piece of equipment (assuming it's an "arm's length" tran ...

    Re: Safest insert cutter heads
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/27) -- JeffD gave a good overall. I've had experience with all but the smoot ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Mel, What you are inquiring about resources is done in our solution by creating ...

    Re: Does optimization=boring shop job?
    A message posted at WOODWEB's Business and Management Forum (5/27) -- "Is all the very interesting to craft stuff on the non profitable side of ...

    Re: Improving Information Flow
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Hello, Larry- He is aware that things need to change and is actively looking fo ...

    Re: Does optimization=boring shop job?
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Mel, The world of chaos does offer some big opportunities when you consider tha ...

    Building a spray room
    A message posted at WOODWEB's Finishing Forum (5/27) -- I purchased a 12' x 20' shed to convert into a spray room for water based finishing. I've rea ...

    Re: Your opinion please
    A message posted at WOODWEB's Business and Management Forum (5/27) -- If the auction web page said that the machine came with two milking heads inste ...

    Re: Rules of Thumb for Max Exterior Door Veneer Thickness?
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- Thanks Larry, I've searched the archives quite a bit before posting, as you s ...

    Measuring small batches
    A message posted at WOODWEB's Finishing Forum (5/27) -- What do you guys use for measuring small quantities of finishes such as CV etc. that require ...

    Your opinion please
    A message posted at WOODWEB's Business and Management Forum (5/27) -- I recently purchased a machine at auction. The web page of the auction company ...

    Re: Paint grade doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- Count me as another guy going against the grain and making doors that don't develop crack ...

    Re: Does optimization=boring shop job?
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Jeez, Mel, what do you want? You go on about how disorganized and inefficient y ...

    Re: Your opinion please
    A message posted at WOODWEB's Business and Management Forum (5/27) -- You can go after them as hard as you want, in reality though if you read throug ...

    Re: Safe Rooms
    A message posted at WOODWEB's Business and Management Forum (5/27) -- We just worked at a home that had a interior concrete room in place, and last y ...

    Conestoga wood finish with AAA
    A message posted at WOODWEB's Finishing Forum (5/27) -- I use Conestoga doors pre finished and usually have several items to finish myself. I buy the ...

    Re: paperwork
    A message posted at WOODWEB's Business and Management Forum (5/27) -- We recently started using Dropbox. We have a jobs folder that is shared with th ...

    Re: how much spring in a spring joint
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- If you are getting deflection in your beds from the weight, you are probably ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Totally in! Though I should warn you that real time may be a slow pace--I've ha ...

    Re: Improving Information Flow
    A message posted at WOODWEB's Business and Management Forum (5/27) -- My first thought is for you to shadow him for a while and document various situ ...

    Re: Shopping for a new Laser Level
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/27) -- Hey Chris, I've used the ones you mentioned, I didn't mind the dewalt ...

    New spray system
    A message posted at WOODWEB's Finishing Forum (5/27) -- I'm looking for a new spray system. I currently have a 3 stage hvlp earlax mv7000. Needs to b ...

    Re: Does optimization=boring shop job?
    A message posted at WOODWEB's Business and Management Forum (5/27) -- As a business proposition, high volume with small variation is a winner - it ca ...

    Re: how much spring in a spring joint
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- leo - thanks for your reply. i neglected to mention that we're jointing glue ...

    Pre-cat VS Post Cat
    A message posted at WOODWEB's Finishing Forum (5/27) -- I have been using pre-cat laq for years without any problem but a post on another forum got m ...

    Re: Your opinion please
    A message posted at WOODWEB's Business and Management Forum (5/27) -- If the milling heads are in the picture of the item I would say they owe them t ...

    Re: Your opinion please
    A message posted at WOODWEB's Business and Management Forum (5/27) -- I purchased a planer from a large online tool broker and the description stated ...

    Re: Measuring small batches
    A message posted at WOODWEB's Finishing Forum (5/27) -- medicine dispensing syringes . easily measure 2.5 to 10 milliliters . local pharmacy . spoons ...

    Re: Choosing water stones
    A message posted at WOODWEB's Furniture Making Forum (5/27) -- That's why I use the WorkSharp 3000,I can shave hair/slice through paper,without the h ...

    Wood Putty or Not?? Making Stairtreads??
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- When we make stairtreads, in the past we usually putty the nail holes and a l ...

    Re: Rules of Thumb for Max Exterior Door Veneer Thickness?
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- Isn't there going to be a water trap between the natural burl edge and the gl ...

    Re: Measuring small batches
    A message posted at WOODWEB's Finishing Forum (5/27) -- Go to your local Feed and Farm Supply or vet supply and pick up some syringes. Leave the cap ...

    Re: Does optimization=boring shop job?
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Thanks Paul! I guess it's a question of delayed gratification. Indeed there wou ...

    Re: how much spring in a spring joint
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- I've got a 16" jointer with massive' long tables. But it took a lot of f ...

    Re: Design flaw ooops...
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- repairing the holes to hinge on the other side should just be a matter of plugging, filli ...

    Re: Does optimization=boring shop job?
    A message posted at WOODWEB's Business and Management Forum (5/27) -- I'd love to be a designer/maker of product. There are a few that succeed @ it. ...

    Re: Improving Information Flow
    A message posted at WOODWEB's Business and Management Forum (5/27) -- "He has recently purchased a cabinet design software but not found the tim ...

    Re: Does optimization=boring shop job?
    A message posted at WOODWEB's Business and Management Forum (5/27) -- I see how it comes across that way--but I think it's a legitimate question that ...

    Re: Pre-cat VS Post Cat
    A message posted at WOODWEB's Finishing Forum (5/27) -- post cat lacquer is just that, same as what you're using except you catalyze it yourself. It ...

    Re: Kremlin vs CAT
    A message posted at WOODWEB's Finishing Forum (5/27) -- I have the CAT pump with bobcat gun. Parts are more or less the same.....give or take a few b ...

    Re: Choosing water stones
    A message posted at WOODWEB's Furniture Making Forum (5/27) -- I'll bet that worksharp is sweet. I take silicon carbide paper and a piece of glass or ...

    Re: Improving Information Flow
    A message posted at WOODWEB's Business and Management Forum (5/27) -- There is a reason for plans & specifications! Software won't help unless al ...

    Re: Your opinion please
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Your fight will be easier with a lawyer, but then you will spend more on the la ...

    Re: Improving Information Flow
    A message posted at WOODWEB's Business and Management Forum (5/27) -- We are developing software like that for our shop right now. It operates just l ...

    Re: Safe Rooms
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Poured concrete, 1/2" steel door!, Wouldn't want anything a bullet could g ...

    Re: Measuring small batches
    A message posted at WOODWEB's Finishing Forum (5/27) -- I bought a digital kitchen scale that will read in grams, mL, and fluid ozs. I use it to meas ...

    Re: Conestoga wood finish with AAA
    A message posted at WOODWEB's Finishing Forum (5/27) -- Thin it so it sprays correctly out of your gun. Check the mil thickness and calculate how man ...

    Re: Pre-cat VS Post Cat
    A message posted at WOODWEB's Finishing Forum (5/27) -- I also used precat for years, but noticed older jobs often had failure from typical water spl ...

    Re: Rules of Thumb for Max Exterior Door Veneer Thickness?
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- This has been covered before and commented on by the Wood Doctor. 3/8" i ...

    Re: Kremlin vs CAT
    A message posted at WOODWEB's Finishing Forum (5/27) -- just swent thru my recordds, the repair kit complete for the cat is like 99 bucks, the cartri ...

    Re: Pre-cat VS Post Cat
    A message posted at WOODWEB's Finishing Forum (5/27) -- Is CV the same as catalyzed lacquer? If so, how does it spray compared to pre cat? I have bee ...

    Re: Does optimization=boring shop job?
    A message posted at WOODWEB's Business and Management Forum (5/27) -- "Is all the very interesting to craft stuff on the non profitable side of ...

    Re: Measuring small batches
    A message posted at WOODWEB's Finishing Forum (5/27) -- Look in the kitchen isle at W-mart or your local grocery store, they sell glass shot like gla ...

    Re: Wood Putty or Not?? Making Stairtreads??
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- Ask the company you're selling them too. If they are going natural then the p ...

    Re: Measuring small batches
    A message posted at WOODWEB's Finishing Forum (5/27) -- I did the same thing as Tim G. The measuring cup I got was made by Anchor. Pretty durable, ta ...

    aem sander safetys
    A message posted at WOODWEB's WOODnetWORK Forum (5/27) -- I need to re-surface a rubber covered contact drum.However,without a belt installed, machin ...

    Re: My mon wants me to make this for her
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- Pat, Thanks i get that but it sounds like hers is a ball bearing i dont think a std lazy ...

    Re: Kremlin vs CAT
    A message posted at WOODWEB's Finishing Forum (5/27) -- I have a CAT waterborne AAA with a bobcat gun. IMO the parts are expensive, just like the Kre ...

    Re: Your opinion please
    A message posted at WOODWEB's Business and Management Forum (5/27) -- Most likely they have a disclaimer on their site to cover this. Auction compani ...

    Re: Measuring small batches
    A message posted at WOODWEB's Finishing Forum (5/27) -- and how can a shot glass measure up to 150 millimeters ? geesh , no surprise people have cata ...

    Re: My mon wants me to make this for her
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- Mini Lazy Susan (3") ...VXB Bearings on Amazon marketplace...$2.99 plus shipping. ...

    Re: Safe Rooms
    A message posted at WOODWEB's Business and Management Forum (5/27) -- I read somewhere that this has become more popular. Ostensibly worries about un ...

    Re: 1994 Author 502 software upgrade?
    A message posted at WOODWEB's CNC Forum (5/27) -- There are companies that sell emulators that replace the floppy drive and allow use of a usb stick ...

    Re: Compact Laminates
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/27) -- Compact laminate is a structural laminate by Formica, similar to Trespa ...

    Re: My mon wants me to make this for her
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- All lazy susans are ball bearing. Go to Ace and check it out. It will work fine. ...

    Re: Measuring small batches
    A message posted at WOODWEB's Finishing Forum (5/27) -- I use a gram scale for my stain formulas and plastic measuring cups for larger quantities. ...

    Re: Felder Pods
    A message posted at WOODWEB's CNC Forum (5/27) -- Call Mike @ Better Vacuum Cups http://greenbvc.com/ or try Padsmore in Canada. www.padsmore.com ...

    Re: My mon wants me to make this for her
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- Lol. Sorry, im tired http://youtu.be/a9TuDnmWsNc ...

    Re: My mon wants me to make this for her
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- I think it must have been an invisible mechanism. ...

    My mon wants me to make this for her
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- What kind of mechanism do you think she used? ...

    Re: Measuring small batches
    A message posted at WOODWEB's Finishing Forum (5/27) -- how can a digital scale measure fluid ounces or milliliters ? ...

    Re: My mon wants me to make this for her
    A message posted at WOODWEB's Cabinetmaking Forum (5/27) -- lazy susan hardware ...

    Re: Measuring small batches
    A message posted at WOODWEB's Finishing Forum (5/27) -- 5 ounces ...

    Another Powderpost beetle problem
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- I was getting some wood from my stash this weekend and found exit holes and powder ri ...

    Re: Crown on ceiling and cabinets
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/27) -- Thanks for the responses. To clarify, our frameless cabinets will be ...

    Re: Basic CAD solution for submittals?
    A message posted at WOODWEB's CAD Forum (5/27) -- That was I guess one of weak points. Architects were always complaining about our drawings. As proj ...

    Re: Crown on ceiling and cabinets
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/27) -- Maybe I am not understanding the question correctly. My response is w ...

    Re: Another Powderpost beetle problem
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- What size are the holes? They could be ambrosia. Borates are in water. For them to be ...

    Re: Thinning Titebond II for slower set
    A message posted at WOODWEB's Furniture Making Forum (5/27) -- The adhesiveness of the glue is not really the issue. It is probably good enough. It i ...

    Re: choppy cuts, band saw
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- 99.99999% of cutting problems are the blade,,,,,, get a new person to sharpen them... ...

    Re: modern furniture
    A message posted at WOODWEB's Furniture Making Forum (5/27) -- It's wood architecture not a durable stuff. So, it's better to have a desired crafted ...

    Re: Another Powderpost beetle problem
    A message posted at WOODWEB's Sawing and Drying Forum (5/27) -- I think Bora-Care orTim-Bor might kill them off. Gene the wood doctor may chime in an ...

    Re: Acad- drawing in inches, dimensions in millimeters
    A message posted at WOODWEB's CAD Forum (5/27) -- Michaels warning is dead-on. Don't ignore it. Trust me .. its a problem that no-one will notice unt ...

    Re: laminate cleaning
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/27) -- Mix 2 parts lacquer thinner with 1 part mineral spirits. Clean off over ...

    Re: Does anyone know how to make this joint?
    A message posted at WOODWEB's Architectural Woodworking Forum (5/27) -- Reading 101: "I need to make about 300 wooden boxes." . Very produc ...

    Re: Cracks in crotch mahogany veneer
    A message posted at WOODWEB's Veneer Forum (5/27) -- Jack, How long did the veneer sit after having the veneer softener applied? What was the MC of t ...

    Re: Ambient dust in shop..what to do?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/27) -- Collect dust at the source is the first strategy. If you sand, ge ...

    Cracks in crotch mahogany veneer
    A message posted at WOODWEB's Veneer Forum (5/27) -- I am working with crotch mahogany veneer for some door and drawer fronts I’m building. The venee ...

    Ambient dust in shop..what to do?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/27) -- Hi, I just moved into a new shop. my problem is the ambient dust ...

    Re: Ambient dust in shop..what to do?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/27) -- Ok. I'll pick up some more air filters. I have a cheapo jet knock ...

    Re: Ambient dust in shop..what to do?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/27) -- A couple air filters hanging form the ceiling will take care of t ...

    Re: Ambient dust in shop..what to do?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/27) -- The JDS and the Jet are basically furnace fans with fine filters. ...

    Reface
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/27) -- Looking for suggestions for refacing plam cabinets on a large scale. ...

    Re: Ambient dust in shop..what to do?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (5/27) -- If you only have a smaller air filter like I do (JDS 750) take a ...

    Re: cabinet door shaper help
    A message posted at WOODWEB's Cabinetmaking Forum (4/27/23) -- I know its been a while but a quick update. -I was able to solve the clamping problem ...

    Re: Help design a simple CNC router table
    A message posted at WOODWEB's CNC Forum (4/27/23) -- What you propose is not for the faint of heart. Chipping, blowout, broken bits due the the depth ...

    Re: Question about Salice thick door hinge
    A message posted at WOODWEB's Cabinetmaking Forum (4/27/23) -- Hello Al, For an 1-1/8" thick door there are 2 choices with soft close. One is th ...

    Re: Veneer bubbles - wrong glue or something else?
    A message posted at WOODWEB's Adhesives Forum (4/27/23) -- Glue can generate veneer bubbles. When veneer is placed, glues with moisture can bubble. O ...

    Re: edgebanding Plam strips
    A message posted at WOODWEB's Adhesives Forum (4/27/23) -- Edgebanding plam strips gives woodworking projects color and texture. The strips decorate ...

    Re: Large custom knife for 5"Tx3"D arched heavy crown moulding? Laguna SSII
    A message posted at WOODWEB's CNC Forum (4/27/23) -- I want to thank everyone for their input/experiences on this topic. For my specific situation, I ...

    Re: Help design a simple CNC router table
    A message posted at WOODWEB's CNC Forum (4/27/23) -- Plus 1 on the pod and rail machine. Try the machinery exchange on this site. Your in CA so there ...

    Re: Question about Salice thick door hinge
    A message posted at WOODWEB's Cabinetmaking Forum (4/27/23) -- https://www.salice.com/us/en/products/hinges/integrated-soft-close-mechanism/silen tia ...

    Re: Staying on top harder than to get there.
    A message posted at WOODWEB's Cabinetmaking Forum (4/27/23) -- Our brand new Holz her sprint started on fire about a year after the company i work fo ...

    Food safe resins & epoxy's
    A message posted at WOODWEB's Furniture Making Forum (4/27/23) -- Hello fellow makers! I recently got into the chopping board game and, I'm looking f ...

    Re: Help design a simple CNC router table
    A message posted at WOODWEB's CNC Forum (4/27/23) -- How many posts read about people making their own CNC machines/tables. Is it really more profita ...

    Re: Mlc polarion for paddles
    A message posted at WOODWEB's Finishing Forum (4/27/23) -- here might be a good alternative designed for your application Interlux Brightside Polyure ...

    Re: Question about Salice thick door hinge
    A message posted at WOODWEB's Cabinetmaking Forum (4/27/23) -- 11/16” overlay. I always appreciate your time Dennis. ...

    Re: Line Bore application
    A message posted at WOODWEB's Cabinetmaking Forum (4/27/23) -- What kind of furniture dave? ...

    Re: Bench top molder review
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27/23) -- This should help you along. ...

    Re: Mlc polarion for paddles
    A message posted at WOODWEB's Finishing Forum (4/27/23) -- Marine grade Fiberglass. ...

    Re: Painting Natural Birch
    A message posted at WOODWEB's Finishing Forum (4/27/22) -- I agree with Rich. Once properly milled it should paint just like maple. The trick is not ...

    Re: Painting Natural Birch
    A message posted at WOODWEB's Finishing Forum (4/27/22) -- If I'm not mistaken I thought Beech was a bit on the grainy side too. Isn't it like a mild ...

    Re: Painting Natural Birch
    A message posted at WOODWEB's Finishing Forum (4/27/22) -- Thanks for the input, the reason I was considering the Birch was one of our suppliers had ...

    Corner Drawers
    A message posted at WOODWEB's Cabinetmaking Forum (4/27/22) -- I knew eventually I was going to get asked to build a set of blind corner drawers. The ...

    Post for Masterwood drill block and spindle
    A message posted at WOODWEB's CNC Forum (4/27/22) -- Hello, We had a Masterwood CNC retrofitted with a new controller and are in need of help of find ...

    Re: Painting Natural Birch
    A message posted at WOODWEB's Finishing Forum (4/27/22) -- One of the caveats with birch is that the wood can have some pretty severe grain reversals ...

    General finishes supplier
    A message posted at WOODWEB's Finishing Forum (4/27/22) -- Hi I'm having a hard time finding anyone local (Durham, NC) who carries and can custom tin ...

    Re: How is hand scraped flooring made commercially?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27/22) -- Dang, my google musta been on the fritz. I had searched foogle and the tube bef ...

    Re: zinser smart prime
    A message posted at WOODWEB's Finishing Forum (4/27/22) -- Not a good idea. I haven't done it. I wouldn't try it. You would typically sand the old an ...

    zinser smart prime
    A message posted at WOODWEB's Finishing Forum (4/27/22) -- this is water mod primer, was wondering if anyone has used this on prepainted cabinets(pro ...

    Re: Painting Natural Birch
    A message posted at WOODWEB's Finishing Forum (4/27/22) -- Yeah, I think I'll try it. The beech is nice for painting, even grain, way better than pop ...

    Re: Painting Natural Birch
    A message posted at WOODWEB's Finishing Forum (4/27/22) -- Ok. We do have the machinery that should be fine for milling so I'm going to give it a try ...

    Re: Fisheye Eliminator!
    A message posted at WOODWEB's Finishing Forum (4/27/22) -- 2nd the mohawk brand, you need to use less then others brands, I always mist on the first ...

    Re: Sand through touch up
    A message posted at WOODWEB's Finishing Forum (4/27) -- The Blendall color stick is only meant for purposes of coloring. It's based on bees wax, whic ...

    drawing help
    A message posted at WOODWEB's CNC Forum (4/27) -- we picked up a small cnc (camaster stinger 2) at the end of last year and i'd like some help drawin ...

    Re: Hydrocote Amber Additive with Sayerlack?
    A message posted at WOODWEB's Finishing Forum (4/27) -- Ive used enduovar the magnamax H2O a few times. as David mentioned its tough stuff, ambers he ...

    Re: Cleaning my new Kremlin 15C25
    A message posted at WOODWEB's Finishing Forum (4/27) -- Covering pigment 2K-polyurethane primer or solvent-based intermediate coating is not only use ...

    Re: UV treatment for already finished cabinets
    A message posted at WOODWEB's Finishing Forum (4/27) -- You have two items that can color shift. The dye and the wood. Wood can change just by being ...

    Crate Construction
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- I crate and ship flat pack furniture nation wide. Volume is fairly low, about $100k annua ...

    Re: Crate Construction
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Weight ranges depending on the package from about 400 lbs to about 600 lbs. Could be wron ...

    Decorative wire mesh
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- What’s the best way to cut woven wire mesh for door panels? We currently use a straight e ...

    Re: Crate Construction
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- You don't mention weight capacity, but I suggest you talk to a local cardboard container ...

    Re: Hydrocote Amber Additive with Sayerlack?
    A message posted at WOODWEB's Finishing Forum (4/27) -- hey jonathan, thanks for this. i'm looking at the chemcraft site - which waterborne topcoat s ...

    Re: soft touch lacquer
    A message posted at WOODWEB's Finishing Forum (4/27) -- Hey Bob, can that soft touch product be put into solvent base conversion varnish as well? ...

    Re: Decorative wire mesh
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- A sheet metal stomp shear is the best way. ...

    Re: Crate Construction
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- 400-600 pound piece of furniture? WOW ...

    Re: Crate Construction
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- What Rich said ...

    Re: 5 axis for nesting
    A message posted at WOODWEB's CNC Forum (4/27) -- Again, thanks for all of the input. Pat: Being an AlphaCam guy it’s a breeze. Alphacam is very vers ...

    Re: Spraying latex with CAT pump
    A message posted at WOODWEB's Finishing Forum (4/27) -- Even in that situation you would still likely be more competitive if he were to just set the ...

    drilling cast iron shaper tables
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- Hello- I've built perhaps over 500 house doors, the majority of which were not cli ...

    Paneled DW Detail
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Looking for some help with this detail. Doors are overlay, with a chamfered finger pull a ...

    Re: Spraying latex with CAT pump
    A message posted at WOODWEB's Finishing Forum (4/27) -- Thanks everyone for your input I think I will not use my pump for latex Just to be clear I'm ...

    Re: estimate
    A message posted at WOODWEB's Finishing Forum (4/27) -- Mmmmmm Maybe you should figure this out yourself How exactly can we offer an idea on how much ...

    Re: Spraying latex with CAT pump
    A message posted at WOODWEB's Finishing Forum (4/27) -- Yes, you can get latex to spray through your CAT pump (I have the same one), but you'll need ...

    Re: Small shop relief
    A message posted at WOODWEB's Business and Management Forum (4/27) -- As a part of EIDL you can also apply for a 10k advance which is forgivable if y ...

    Re: Help with water base finishes
    A message posted at WOODWEB's Finishing Forum (4/27) -- Hi Dan I know that the primer for renner is 53% solids. The needle nozzle size recomended is ...

    Re: Small shop relief
    A message posted at WOODWEB's Business and Management Forum (4/27) -- For the payroll loan, if my employee is laid off and I just take a check at the ...

    Edge Profile
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/27) -- I am new to solid surface fabricating and I am attempting to duplicate a ...

    Re: Spraying latex with CAT pump
    A message posted at WOODWEB's Finishing Forum (4/27) -- I have had experience with latex sprayed with a pump AAA unit. It was not good. Air bubbles w ...

    Re: Vectric Aspire in Rhode Island
    A message posted at WOODWEB's CNC Forum (4/27) -- Here you go it's a map of vetric users that you can find on their website. https://www.google.com/m ...

    Re: Small shop relief
    A message posted at WOODWEB's Business and Management Forum (4/27) -- You have two resources: EIDL with the SBA is quick and about $2000 SBA- PPP is ...

    Vectric Aspire in Rhode Island
    A message posted at WOODWEB's CNC Forum (4/27) -- Is anyone in Rhode Island using the Vectric Aspire CAM software with their CNC machine? Vectric won ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/27) -- That the thing is we as a wood workers don't know anything about a virus. Scary ...

    Re: Cabinet Assembly
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- My bad, That tip out is upside down, I didn't follow the long arm geometry properly when ...

    Re: estimate
    A message posted at WOODWEB's Finishing Forum (4/27) -- If I was you, I wood just hang a dart board on the wall and start heaving darts at it. If whe ...

    Re: Sales design software
    A message posted at WOODWEB's CAD Forum (4/27) -- For Revit users i would suggest AGACAD Revit`s plugins: http://www.aga-cad.com/products/bim-solutio ...

    Re: Kremlin cleaning advice
    A message posted at WOODWEB's Finishing Forum (4/27) -- +1 for Acrastrip. 600 B/G is what I use. Works on waterbased, CV, 2k poly, etc. ...

    Re: Software to sketchUp
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/27) -- I use vectric vcarve pro 10 for cam of my sketchup designs. ...

    Re: Vectric Aspire in Rhode Island
    A message posted at WOODWEB's CNC Forum (4/27) -- Thats great. I cant find that link anywhere on the website. Thanks for the help ...

    Re: Edge Profile
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/27) -- Thats just a partial of the appropriate sized ogee ...

    Re: Paneled DW Detail
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Here is a sketch of my idea. ...

    Re: Small edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- No idea what you're budget is, but we just priced out a new lower end Homag. $50k. It has ...

    Re: Precix QM Control software
    A message posted at WOODWEB's CNC Forum (4/27) -- I was production manager and head engineer at Precix from 2003 to 2009. In 2009 I bought all of the ...

    Re: Wood Identification
    A message posted at WOODWEB's Sawing and Drying Forum (4/27) -- I have seen something like that some years ago. It was a Cultivar of the Locust varie ...

    Re: trimming router for Holzher Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- lakeside industrial parts supply lee johnson the holzher guru 803-789-3026 lakesideindust ...

    Re: Saber 408 2" acrylic furring problem
    A message posted at WOODWEB's CNC Forum (4/27) -- You won't like this but onsrud make a finisher diamond bit they they are ore $1000 ...

    Re: trimming router for Holzher Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- dido what Bob said. ...

    Low VOC custom stain colors
    A message posted at WOODWEB's Finishing Forum (4/27) -- Good morning, we are doing sample work for designer approval for a children's museum. The sta ...

    Re: Refinishing End Table
    A message posted at WOODWEB's Finishing Forum (4/27) -- Sealing before staining would prevent the stain from penetrating, which is not good. Not sure ...

    End grain to edge butt joint strength
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- I had to knock apart a face frame and was a little surprised by how much of the wood brok ...

    Re: need a cheap 4 x 8 cnc router
    A message posted at WOODWEB's CNC Forum (4/27) -- The factory that produces woodworking machinery from China mainly deals in panel furniture, cnc rou ...

    Re: Refinishing End Table
    A message posted at WOODWEB's Finishing Forum (4/27) -- Kevin & Pat, I used Min Wax Stain (Natural #209) and Min Wax Poly Clear Gloss, I put 2 co ...

    Miter saw or portable table saw?
    A message posted at WOODWEB's CNC Forum (4/27) -- Hello everyone, great forums here and your advice has helped a lot in the past! I am a beginner who ...

    Re: Low VOC custom stain colors
    A message posted at WOODWEB's Finishing Forum (4/27) -- San-Sin (Canadian based high end residential coatings manufacture)has a 0 VOC stain that is a ...

    Re: 2D drawings are replaced by 3D models?
    A message posted at WOODWEB's CAD Forum (4/27) -- We are working with many clients who still needs the drawings in 2D. other type of drafting or desi ...

    Re: Pendulum processing
    A message posted at WOODWEB's CNC Forum (4/27) -- When I programed G-Code back in the 90's on a twin table cnc. We would just write a standard g-code ...

    Re: Immobilizing a unit on casters
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Make two long hardwood "chocks". Start with a 3/4" x 2½ piece of hardwood ...

    Re: Low VOC custom stain colors
    A message posted at WOODWEB's Finishing Forum (4/27) -- I'd try using diluted versions of the paint colors as your stain. Target Coatings in North Je ...

    Re: Low VOC custom stain colors
    A message posted at WOODWEB's Finishing Forum (4/27) -- Would they mix single gallons of stain? I'm only making 8x8" samples for approvals, a ma ...

    Re: cabinet fixings
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- I would guess glue and dowels if there are no indications of fasteners. You could try a w ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Someone asked what the best type of clamp is. It is this type of clamp. This is the small ...

    Re: Low VOC custom stain colors
    A message posted at WOODWEB's Finishing Forum (4/27) -- PS; my local San-Sin distributor will custom mix their 0 VOC stain in as small volume as a qu ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Yes they are not inexpensive. Keep an eye on auctions. The difference from using hand cla ...

    Pendulum processing
    A message posted at WOODWEB's CNC Forum (4/27) -- Hi All Not much of a programmer, so I'm wondering how people write the g code handle the change fro ...

    Re: Can I run conversational software and a post processor on the same mach
    A message posted at WOODWEB's CNC Forum (4/27) -- A machine can use design software at the same time, but I have not tried post-processing software. ...

    Re: Can I run conversational software and a post processor on the same mach
    A message posted at WOODWEB's CNC Forum (4/27) -- What type of PLC? As long as you can get a post written, it should work. ...

    Re: Can I run conversational software and a post processor on the same mach
    A message posted at WOODWEB's CNC Forum (4/27) -- Just curious, my machine uses a PLC, not sure what I can get away with ...

    Re: Low VOC custom stain colors
    A message posted at WOODWEB's Finishing Forum (4/27) -- You need to call the guys at Colorspec Coatings on Long Island, they can help you with this. ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- That is a bit out of my price range. ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Tim, you seem to be a bit overwrought. Of course this is part of his strategy o ...

    Re: Raimen saw programming?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- I run a Raimann KR610 with VR4. Tap Raimann square bottom right on screen, tap ord ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/27) -- Kevin, First, my apologies for not responding sooner. Many months ago I chang ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Trump does have a few good people around him. General Mattis being one of them. ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/27) -- Jim- My thoughts exactly as the room progressed - the crown would follow the ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Econ 101, Your arguments are always very well reasoned and I usually agree with ...

    Re: shaper or moulder knives
    A message posted at WOODWEB's Architectural Woodworking Forum (4/27) -- These are typical for knives used on molders. Normally, you would have plasti ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Harold, As soon as import lumber becomes more expensive then all the domestic m ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Econ 101, We wouldn't have had ISIS if we hadn't of invaded Iraq. We invaded Ir ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- I'll guess that just about every lemonade stand in history has involved nepotis ...

    Help! My draftsman is leaving!
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Let's just say I'm in a dilemma. I've got a backlog of work with lots of promis ...

    Re: Metallic finish
    A message posted at WOODWEB's Finishing Forum (4/27) -- I've done a bit of that. You can have metallic powder or flake dumped into several different ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- cabmaker, Those of us who voted for him do not care about his tax returns. He's ...

    shaper or moulder knives
    A message posted at WOODWEB's Architectural Woodworking Forum (4/27) -- I've never used a shaper or moulder before and I purchased a bunch of barely ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Harold, That is what I mean by the impact of unintended consequences. Just like ...

    Re: Pole Barn vs. Steel Building for Woodshop
    A message posted at WOODWEB's WOODnetWORK Forum (4/27) -- I started my business in a shop behind my garage. Then I purchased an old service station a ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- I would like to retract my comment about "President Bannon". That was ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- "Bush 2 went in and toppled the government and we got ISIS in exchange&quo ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/27) -- The factor that came into play is that the beam crowns intersected the perime ...

    Re: Thicknessing glue-ups: planer vs. wide-belt sander
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- I would take a step back and fine tune your glue up process. I glue panels for doo ...

    Re: Enlarging hole for bigger led spot
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- I don't think it's been mentioned but how much bigger does it have to be. One trick I've ...

    Re: Weinig Powermat
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- Are you asking the question on time based on the machine positioning itself. I hav ...

    Re: cutting corrugated aluminum
    A message posted at WOODWEB's CNC Forum (4/27) -- I agree with Chuck Hicks. I have cut panels like those you are talking about for a sign company. I ...

    Re: applying veneer to safe room door
    A message posted at WOODWEB's Veneer Forum (4/27) -- We use only flammable adhesives. In the late 80's and early 90's, WilsonArt came out with a non- ...

    Re: Steps for Milk paint then Glaze then poly
    A message posted at WOODWEB's Finishing Forum (4/27) -- I wouldn't put vinyl sealer over GF milk paint. It's WB and you could end up with a serious m ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- itd goingvto grt worse for the working man. my sheet goods supplier jusy showed ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Talk about overthought!! Or overwrought!!! This is much simpler than any of you ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Econ 101, Nepotism is a bad way to run a lemonade stand. It's an even worse way ...

    Re: Raimen saw programming?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- Not sure how your connected to the front office but we can set up cut list that ar ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- cabmaker, This is one we can agree on. Kushner & Ivanka. I'd love to see th ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- This isn't anything new, the media is just calling it something different so th ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- cabinetmaker, thats what drives me crazy. when tarriffs are raised to make amer ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- I didn't take your bait on Bannon and I'm not gonna take it on Kushner, either. ...

    Re: Acrylic enamel or tinted CV
    A message posted at WOODWEB's Finishing Forum (4/27) -- I just picked up a catalyzed vinyl sealer to go along with the pigmented conversion varnish. ...

    Re: shaper or moulder knives
    A message posted at WOODWEB's Architectural Woodworking Forum (4/27) -- You can run those on a shaper , the tallest cutter I feel comfortable running ...

    Re: Biesse or Holzher Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Bob, If you're only reason to upgrade is to do the high gloss, why not outsource those? A ...

    SCM Jointer
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- I am looking for feedback on a SCM F410 Nova 16" jointer. We are considering ...

    Re: applying veneer to safe room door
    A message posted at WOODWEB's Veneer Forum (4/27) -- Rich C. You might be right. He should have noticed that, if the paint was dissolving. He will fi ...

    Weinig Powermat
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- What is a realistic setup time that can be expected with a new 6 head Weinig Power ...

    Re: applying veneer to safe room door
    A message posted at WOODWEB's Veneer Forum (4/27) -- The reason I asked was because the solvent based is probably acting like a paint stripper on the ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- C'mon Tim, I answered all of your initial-post questions, as requested. Why don ...

    Re: cutting corrugated aluminum
    A message posted at WOODWEB's CNC Forum (4/27) -- An O flute Spiral upcut would be the way to go or a straight flute O Flute will work also. I recomm ...

    Re: HVLP canisters
    A message posted at WOODWEB's Finishing Forum (4/27) -- I have found several sources for siphon cups, as they are called. However, I would love to ge ...

    Re: cutting corrugated aluminum
    A message posted at WOODWEB's CNC Forum (4/27) -- is it Alucobond like in the video below? If so call Vortex,Onsrud etc.. It is quite popular materia ...

    Re: Toe skins finish at 3" from door or 3" case?
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Curious. I thought 4" up and 3" back from face of door was the norm. Anyone els ...

    Re: Acrylic enamel or tinted CV
    A message posted at WOODWEB's Finishing Forum (4/27) -- if your using a catalyzed finish such as Cv you should also use a catalyzed primer........ Ma ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/27) -- David -Beautiful work-Thanks for sharing some of your knowledge. I have nothi ...

    Wifi
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/27) -- Hi all, apologies if this has already been asked. Has anyone got ...

    Metallic finish
    A message posted at WOODWEB's Finishing Forum (4/27) -- I'd like to do some metallic finish on MDF. I don't want to use automotive finish. Have any o ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Cept ISIS was created by ex Republican Guard. IOW it would have been better if ...

    Re: cutting corrugated aluminum
    A message posted at WOODWEB's CNC Forum (4/27) -- You did not mention thickness. I cut plastic with aluminum skins frequently with a single O flute t ...

    Re: Enlarging hole for bigger led spot
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Use the supersize square LED that is less than 1/4" thick from hafele and cover the ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/27) -- I wouldn't discount the possibility that lumber sales are taking advantage of t ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/27) -- Awesome bunch of information in here. Phenomenal work David (and also B.H.). ...

    Re: cutting corrugated aluminum
    A message posted at WOODWEB's CNC Forum (4/27) -- Sorry about the lack of clarity in my post. It is 1/4" thick and I was planning on cutting it ...

    Re: Wifi
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/27) -- Does it need to be protected? I have 2 WAP in the shop with no pr ...

    Re: Metallic finish
    A message posted at WOODWEB's Finishing Forum (4/27) -- Here's an option. Very popular with artistic woodturners. The patina works great. ...

    Re: Cutting straight and close
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- The link should be a bit more informative (includes pics). ...

    Re: HVLP canisters
    A message posted at WOODWEB's Finishing Forum (4/27) -- found them at Finish Systems...ad on this site. :) ...

    Re: Cutting straight and close
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Thanks Dave ...

    Re: Slab Door
    A message posted at WOODWEB's Architectural Woodworking Forum (4/27) -- Id say block core ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Richard, I clearly said that any kind of harassment is unacceptable in the work ...

    Re: Weeke Vs Anderson Vs Biesse Vs Omnitech
    A message posted at WOODWEB's CNC Forum (4/27) -- Mike I appreciate the comment about the Fanuc controller, but at the same time, I've not heard any ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Pat Gilbert, when you are reduced to accusing your reader of not understanding ...

    Re: Weeke Vs Anderson Vs Biesse Vs Omnitech
    A message posted at WOODWEB's CNC Forum (4/27) -- I think the most important thing is actually the software to drive the machine. Without integrated ...

    Re: Weeke Vs Anderson Vs Biesse Vs Omnitech
    A message posted at WOODWEB's CNC Forum (4/27) -- Woodwop is unbelievable crippled in my opinion, unless you want to treat your machine like a point- ...

    CNC Woodworking Seminar
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- Hi everyone, My company (Rangate) is hosting a seminar called "Innovations in ...

    Re: Weeke Vs Anderson Vs Biesse Vs Omnitech
    A message posted at WOODWEB's CNC Forum (4/27) -- Jeff, I have been running a Biesse Rover for several years. I like the machine. The Klever is a sma ...

    Re: Weeke Vs Anderson Vs Biesse Vs Omnitech
    A message posted at WOODWEB's CNC Forum (4/27) -- Jeff, Just a couple of points, the machine across town is new, but the techs have been in nearly da ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Kevin Yes, most Secretaries of State say the same thing. I had an employee a wh ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Mel, Is there an employee handbook at your workplace? If so, it should cover ev ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/27) -- "Putting male/female pay disparities aside, do you really mean to say that ...

    Does gang ripping make straight boards?
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- When cutting boards off of let's say a 10" wide board and we want (3) 3" wide b ...

    Re: Mixed Light Industrial with Residential - Live/Work
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Great discussion. Look up "South Side Works Pittsburgh" on web or Wik ...

    Re: Mixed Light Industrial with Residential - Live/Work
    A message posted at WOODWEB's Business and Management Forum (4/27) -- I REALLY don't understand the negativity on this thread. Someone has asked for ...

    Ageing fir
    A message posted at WOODWEB's Finishing Forum (4/27) -- I have a 40+ year old fir ceiling that I have to match several replaced boards on. I think it ...

    Re: Pricing prefinished trim
    A message posted at WOODWEB's Finishing Forum (4/27) -- don't glaze it, tone it. I've done this with poplar trim to match the existing walnut cabinet ...

    Dekker Vacuum Pumps
    A message posted at WOODWEB's CNC Forum (4/27) -- Looking for some advice from Dekker Vacuum pump users. Is anyone using the 25 HP on a 5'x10'? I've ...

    Re: Weeke Vs Anderson Vs Biesse Vs Omnitech
    A message posted at WOODWEB's CNC Forum (4/27) -- Jeff, If you have CV & S2M I think that would negate any advantage of the cut center. Might eve ...

    Re: Rough Cut Plastic Laminate on CNC
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/27) -- We cut most of our laminate on cnc. Works wonders for curved receptions ...

    beam saw cut
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/27) -- hello all hope your having a great day i would like to ask if any one ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Pat, Color me simpleminded but I don't think it is necessary to search for an i ...

    storing cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- We have a high end finished kitchen that contractor wants to store in a metal storage con ...

    Re: Cabinet Vision Essential Shop Drawings
    A message posted at WOODWEB's CAD Forum (4/27) -- You can also buy an older cpu with windows 98 and use it with kitchen builder only and use your new ...

    Re: Horizontal Boring
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Banding first provides a valuable visual reference when boring - the banded (or raw, e.g. ...

    Re: storing cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- There are plenty of climate controlled storage units around. Even if you tell him warrant ...

    Cabinet vision 9 backup restore
    A message posted at WOODWEB's CAD Forum (4/27) -- Hi I recently upgraded Cabinet vision to version 9 and I have some problems with transfer version 8 ...

    Re: The Death Of CabnetWare
    A message posted at WOODWEB's CAD Forum (4/27) -- Yes i read the obituary email as well,, RIP ole friend, made me some money over the years with it. ...

    Re: storing cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Get paid in full. Tell them the cabs are warrantied to 95F and stick a thermometer in the ...

    Re: Black Laminate- Best Way To Clean
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/27) -- Try some mr.clean magic eraser. Not the abrasive kind, but the lightest ...

    Large Diameter Bar Rail
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- I'm looking for 3 to 4 inch diameter brass foot rail for a residential bar application. I ...

    Re: "Specks" in Chemcraft Pigmented Varnish
    A message posted at WOODWEB's Finishing Forum (4/27) -- Sorry to hear your still having trouble Larry.... Did you get the microscope like I suggested ...

    Re: Cleaning top and bottom planers
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/27) -- Try both and see what works best. Personally, AFAIK, we don't nee ...

    Re: Follow up and thoughts on the gender issue
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Dear Abby,Instead of continuing your education at the University of Oh Woe is M ...

    Re: Ageing fir
    A message posted at WOODWEB's Finishing Forum (4/27) -- I've used amber or garnet shellac to "yellow" new finish as a wash coat. No complai ...

    Re: Horizontal Boring
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- I drill everything (cnc) before edgeband. I don't want a chance that something the edgeba ...

    Re: The Death Of CabnetWare
    A message posted at WOODWEB's CAD Forum (4/27) -- "V-14 will work for me for many years to come." As long as you are able to maintain a pla ...

    Re: The Death Of CabnetWare
    A message posted at WOODWEB's CAD Forum (4/27) -- Cabnetware will live on....Im sure of it....maybe not thru VERO ....but some how it will.....too ma ...

    Re: The Death Of CabnetWare
    A message posted at WOODWEB's CAD Forum (4/27) -- I'm thinking that I may re open my CW4US CabnetWare Help Forum again. http://cabnetwareforus.forumo ...

    Re: storing cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- I wouldn't like it of it was my responsibility. Get your money up front and make it his b ...

    Re: Does gang ripping make straight boards?
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Stress is never eliminated. Only dealt with. You will have loss. ...

    Re: Cabinet Vision Essential Shop Drawings
    A message posted at WOODWEB's CAD Forum (4/27) -- There's no way to run Kitchen Builder on Windows 10, right? ...

    Re: Weeke Vs Anderson Vs Biesse Vs Omnitech
    A message posted at WOODWEB's CNC Forum (4/27) -- Any thoughts on Thermwood and there new Cut Center? ...

    Re: Large Diameter Bar Rail
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Online metals and speedy metals both have it. ...

    Re: Old Fashioned Cabinet Hinge Replacement
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Thanks, I'll try that out ...

    Re: The Death Of CabnetWare
    A message posted at WOODWEB's CAD Forum (4/27) -- Jim i should have participated more but i did lurk a lot ! ...

    Re: biesse
    A message posted at WOODWEB's CNC Forum (4/27) -- Have you gotten a solution? I'm curious to know what it was . ...

    Inventor for Casework
    A message posted at WOODWEB's CAD Forum (4/27) -- Does anyone use Inventor software for casework. ...

    Re: Moulder software
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- Pretty interesting spreadsheet. We have a similar one. Though not quite as fancy i ...

    Re: Starting a new company, what's most important?
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Hey Larry, it definitely sounds unusual I'll grant you that. There are two poin ...

    Re: CNC Vector speed
    A message posted at WOODWEB's CNC Forum (4/27) -- 100m/min is really flying, a typical cut is way slower, in the neighborhood of 10, 20 or 30 m/min f ...

    Re: Figuring Highs and lows of a room
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/27) -- Bernie said it best, however whoever measured for the cabinetry shoul ...

    Re: CNC Vector speed
    A message posted at WOODWEB's CNC Forum (4/27) -- If you are running that much, It is worth doing a time study to see just what kind of benefit you a ...

    Re: Angel investors
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Lets keep in mind that some of the first 3-d printing marvels were burgers and ...

    Re: Making 100% flat Table for Solid Wood Working
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- The table is only as flat as the floor. The floor is only as flat as the foundatio ...

    Re: Starting a new company, what's most important?
    A message posted at WOODWEB's Business and Management Forum (4/27) -- I'm glad to see things get turned back some. There have been some good posts he ...

    Re: Pricing
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Payroll percentage is a good guide, but you need to clarify what "payroll& ...

    Re: Sideboard - solid wood or plywood construction?
    A message posted at WOODWEB's Furniture Making Forum (4/27) -- Thanks for your input guys. Unfortunately frame and panel isn't an option because the ...

    Tite-joint fastners
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- I haven't used these "dog bones" in a long time, but I now have a need and don' ...

    Re: CNC Vector speed
    A message posted at WOODWEB's CNC Forum (4/27) -- Thanks for your response Mark. A little more info. We run parts on the CNC, it's not a nested machi ...

    Re: Tite-joint fastners
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Tite-joint are the ones with the ball with several holes that you use a steel pin to tigh ...

    Re: Starting a new company, what's most important?
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Huh? "If we get to a point where the workload demands full time employees ...

    is this junk?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- http://www.rockler.com/steam-bending-kit-w-free-bentwood-carryall-plan-download# I ...

    Re: Tite-joint fastners
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- I buy both from Richelieu Hardware, here in Canada. I believe they also sell in the USA. ...

    paint pvc trim and beadboard with CV?
    A message posted at WOODWEB's Finishing Forum (4/27) -- We have a client that wants us to paint some of their bathroom trim to match the cabinets. PV ...

    Re: Angel investors
    A message posted at WOODWEB's Business and Management Forum (4/27) -- While we are bio-printing could I put in an order for a three-armed cabinetmake ...

    Re: Who makes very good, High Quality chisels
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- Thx everyone, but im more confused than ever Im looking for the type of chisels th ...

    Re: Moulder software
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- I found this on Wood Web several years ago and have been using it ever since. You' ...

    Re: Angel investors
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Actually Pat in the same way we dispense with the cow and just grow the steak w ...

    Re: cnc accurecy
    A message posted at WOODWEB's CNC Forum (4/27) -- HI again. I tried rotating the parts it made no difference. tool diameter is perfect. I wold apprec ...

    Re: Tite-joint fastners
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- Thx andrew. I need to install a closet system's countertops (made an office of cabinets a ...

    Re: Hvlp gun
    A message posted at WOODWEB's Finishing Forum (4/27) -- You might want to try 3M's new 'Disposable' Accuspray PPS guns.....the heads are disposable.. ...

    Re: Starting a new company, what's most important?
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Like I said, have a good tax person BEFORE you start making cabinets. "Und ...

    Re: Best way to label parts
    A message posted at WOODWEB's Business and Management Forum (4/27) -- If you are producing cultists (as you state) the FBI will probably identify the ...

    Re: Figuring Highs and lows of a room
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/27) -- Yes Paul, youre right, i do have a facia board. Thank god! The bigges ...

    Re: Cabinet Vision - Label IT
    A message posted at WOODWEB's CAD Forum (4/27) -- Russell- looks like you cannot change that depth marker very easily. You can remove it and then add ...

    Re: Cabinet Vision - Label IT
    A message posted at WOODWEB's CAD Forum (4/27) -- we have labelit and its light years ahead of the basic label reports in cv. I bought a $250 touch s ...

    Plastic casework
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- We are currently doing a job that calls for cabinets made from solid plastic. The product ...

    Re: High school CNC
    A message posted at WOODWEB's CNC Forum (4/27) -- Get in touch with Michael Friedman from Grice Middle school http://www.hamilton.k12.nj.us/webpages/ ...

    Re: Hvlp gun
    A message posted at WOODWEB's Finishing Forum (4/27) -- My favorite gun is my Iwata HVLP400. It's an expensive gun made in Japan. I use it to paint c ...

    Re: Angel investors
    A message posted at WOODWEB's Business and Management Forum (4/27) -- All truth comes from Start Trek, the replicator for the food and an X rated hol ...

    Re: Starting a new company, what's most important?
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Yes they are a subcontractor and I would pay them like I do now for the house w ...

    Re: Best way to label parts
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Well, I know it's about cultists and The Doors. Maybe I should listen to " ...

    Re: Hearing loss and CNC machines
    A message posted at WOODWEB's CNC Forum (4/27) -- 29 years of machinery,, My hearing is (Hi frequency) is Gone,, Been wearing Hearing Aids for two ye ...

    Re: Hvlp gun
    A message posted at WOODWEB's Finishing Forum (4/27) -- Has any one tried the air gunso by iwata the impact az3 hvlp it's like 160.00 just wonder if ...

    Re: High school CNC
    A message posted at WOODWEB's CNC Forum (4/27) -- There are Educators on both the CAMheads and Shopbot forums, be a good place to send them to look ...

    Re: Best way to label parts
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Comrade Red, Were you able to decipher the coded message? ...

    Re: Angel investors
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Why not 8 arms? also have them CNC precise to a few .001 ...

    Re: Angel investors
    A message posted at WOODWEB's Business and Management Forum (4/27) -- Ooooo! Got me a fancy new pseudonym!! Heheh :) ...

    Re: Melamine
    A message posted at WOODWEB's Cabinetmaking Forum (4/27) -- $34 sheet 5 X 8 North Carolina ...

    Re: Solid surface shop set-up
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/27) -- Well you need a good panel saw if no cnc and lots of 3hp pc routers. You ...

    Re: SAC Planer problem Table Lift
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- Paul, powered tables? On my griggio the table lift is done with an independent mot ...

    Re: 230v motors on 208v 3phase
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- Hello Bill thanks for the response. I think you spot on. The scm and griggio both ...

    Re: SAC Planer problem Table Lift
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- Thank you for your response. Turns out I have a bad 3 position switch. Switch will ...

    Re: Millwork with Ipe
    A message posted at WOODWEB's Architectural Woodworking Forum (4/27) -- Thank you for the responses to my question, it was the kind of information I ...

    Re: 230v motors on 208v 3phase
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- I run standard shop equipment. 2 unisaws, 3 shapers, edge sander, dust collector, ...

    Re: 230v motors on 208v 3phase
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- Most motors specify +\- 10%. That's 23 volts so you should be ok. Running at a low ...

    Re: 230v motors on 208v 3phase
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- I run all my machines on 208v. I have a separate boost transformer for my tablesaw ...

    Re: univer feeder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- The beauty of 3 phase is that you just wire it up and see which way it goes. If it ...

    Re: 230v motors on 208v 3phase
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- thanks Leo, that's the kind of thing I like to hear. What are you running on the 2 ...

    Re: univer feeder
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- lacking any controls other than a on/off switch which the feeder is. So yes,thanks ...

    Re: Burning sawdust in a pellet stove
    A message posted at WOODWEB's Value Added Wood Processing Forum (4/27) -- Made a mistake in this post: Should read 25-30 gallons per day of sawdust. ...

    Re: shaper problem
    A message posted at WOODWEB's Solid Wood Machining Forum (4/27) -- I agree, absolutely the fence. ...

    Re: Suitability of plastic dust barrels
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/27) -- I'm not sure how flimsy your plastic barrels are. Generally they ...

    Re: Suitability of plastic dust barrels
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/27) -- I'm not sure how flimsy your plastic barrels are. Generally they ...

    Re: Suitability of plastic dust barrels
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/27) -- I'm encouraged by your remarks though on Pentz's site (I think th ...

    fine dust cling to doors ,will static bar help?? ???
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/27) -- I use 180 gr with cushion platnin to finish sand hardwood doors. ...

    Suitability of plastic dust barrels
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/27) -- I've got an old Torit 7-1/2 Hp cyclone I'm trying to adapt to a n ...

    Re: Very Large Oak Tree
    A message posted at WOODWEB's Value Added Wood Processing Forum (4/27) -- Dr. Sam Sherrill of Cincinnati (area), Ohio, is the author of "Harvest ...

    Re: Commercial Millwork Deliveries
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/27/24) -- The situation you've described sounds incredibly frustrating and i ...

    Re: Automatic Tool Change Alternative System
    A message posted at WOODWEB's CNC Forum (3/27/24) -- No, haven't tried a torque wrench since that was sold with the business. This is a simple Perske ...

    Re: CNC Bits Recommendation
    A message posted at WOODWEB's CNC Forum (3/27/24) -- Hi Guys, Thank you all so very much for taking the time to answer my questions with your recomme ...

    Re: Built In Bookcases
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/27/24) -- Good day! I would like to share a useful tip with you. If you need ...

    OMC press
    A message posted at WOODWEB's Solid Wood Machining Forum (3/27/24) -- We have an OMC press. The coin battery CR2032 in the back of the HMI screen wen ...

    Re: CNC Bits Recommendation
    A message posted at WOODWEB's CNC Forum (3/27/24) -- We use Vortex bits. I would download their app. It can be very helpful. I would also get on the ...

    Re: CNC Bits Recommendation
    A message posted at WOODWEB's CNC Forum (3/27/24) -- It's not a matter of stupid - I say the only stupid question is the one you don't ask. General q ...

    Re: Shellac
    A message posted at WOODWEB's Finishing Forum (3/27/24) -- I never take a chance. I use what the manufacturer recommends, and that is usually a vinyl ...

    Re: CNC Bits Recommendation
    A message posted at WOODWEB's CNC Forum (3/27/24) -- I don't see anything wrong with asking generalized and "stupid" questions for someone, ...

    Cosmos Sander by Stolbek
    A message posted at WOODWEB's Cabinetmaking Forum (3/27/24) -- Anyone have experience with this Cosmos Robotic arm sander from Stolbek? ...

    Shellac
    A message posted at WOODWEB's Finishing Forum (3/27/24) -- Can dewaxed shellac be used as a seal coat under pre/post catalyzed lacquer? Thanks ...

    Re: Automatic Tool Change Alternative System
    A message posted at WOODWEB's CNC Forum (3/27/24) -- Have you tried a torque wrench? ...

    wood species
    A message posted at WOODWEB's Finishing Forum (3/27/24) -- Does this look like Philippine Mahogany? ...

    Re: Shellac
    A message posted at WOODWEB's Finishing Forum (3/27/24) -- Sure it can, but why would you? ...

    Re: Source for prelaminated panels with realistic faux walnut?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/27/23) -- Santhiago, Thanks, I have ordered some TFL samples from wilsonart, bu ...

    Re: Anyone have a Minimax T124 Lathe?
    A message posted at WOODWEB's Furniture Making Forum (3/27/23) -- Here's a pic of my follower bearing / steady rest. Looks like your missing the oute ...

    Hidden Pantry Door
    A message posted at WOODWEB's Cabinetmaking Forum (3/27/23) -- We are designing a kitchen and the client wants the pantry door (1.75 th) to be hidden ...

    Re: Hinge replacement
    A message posted at WOODWEB's Cabinetmaking Forum (3/27/23) -- Dennis thank you for your response. The old hinge, looks like Mepla is imprinted on it ...

    Re: Anyone have a Minimax T124 Lathe?
    A message posted at WOODWEB's Furniture Making Forum (3/27/23) -- Thanks Thomas! I do have the horseshoe bearing retainer, and I'm going to have the ...

    Re: Source for prelaminated panels with realistic faux walnut?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/27/23) -- Here's a pic of Stevenswood L02 and L03 Alder, as well as the Egger w ...

    Re: brandt edgebander error?
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27/23) -- Good morning, did you manage to solve the problem with the reference point ...

    Re: Hidden Pantry Door
    A message posted at WOODWEB's Cabinetmaking Forum (3/27/23) -- SOSS 518 is a good choice for this. You client will choke on it's price though. ...

    Re: MASTER FINISHER
    A message posted at WOODWEB's Finishing Forum (3/27/23) -- I've never met a finisher looking for a job who wasn't a "Master Finisher" ...

    Corner cabinets backs and fronts. Look at mitered backs.
    A message posted at WOODWEB's Cabinetmaking Forum (3/27/22) -- Here is a base corner meant for a 33" dia standard susan stack. It is CNC cut, an ...

    Re: Staple gun for cab door panels
    A message posted at WOODWEB's Cabinetmaking Forum (3/27/22) -- yes they are plywood panels, I'm not sure why they do it but they do. I was just hopin ...

    Small CNC recommendations
    A message posted at WOODWEB's CNC Forum (3/27/22) -- Hi all, we are a 4 man shop with two sliders with tiger rip fences and great Bander and double l ...

    Cutting edges of cabinet backs for mitering
    A message posted at WOODWEB's CNC Forum (3/27/22) -- We don't cut. Our cabinet carcases are cut by a jobber, and we just program the work and email t ...

    Re: Spraying Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (3/27/22) -- That larger kitchen cabinet factories also has a couple of designer who talk about craftma ...

    Wide Belt sander platen material
    A message posted at WOODWEB's Solid Wood Machining Forum (3/27/22) -- I am getting crowning on parts no matter how light the pressure is on the plate ...

    Re: Spraying Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (3/27/22) -- The larger kitchen cabinet factories here in MN are paying at least $20.00 an hour to star ...

    Re: Operating vac pumps remotely
    A message posted at WOODWEB's CNC Forum (3/27/22) -- We set ours up remotely back in 2003. The pump is located in the compressor room. That keeps the ...

    Re: RE: Large Handheld Orbital Sander & Machine Sanders
    A message posted at WOODWEB's Solid Wood Machining Forum (3/27/22) -- A 37” or larger wide belt sander would do almost 100% of the sanding for you. T ...

    Re: Glue lines in paint
    A message posted at WOODWEB's Finishing Forum (3/27/22) -- Jeff, you're not alone. I have seen this myself with some outsourced doors we finished wit ...

    Re: Corner cabinets backs and fronts. Look at mitered backs.
    A message posted at WOODWEB's Cabinetmaking Forum (3/27/22) -- I only miter the back back at 45º. The other 2 are square and go over it. I use staple ...

    Re: Alternatives to Sayerlack clears
    A message posted at WOODWEB's Finishing Forum (3/27/22) -- Thanks Chris. I'll check them out. Meanwhile I am trying SIVAM that our local Richeleiu di ...

    Re: Operating vac pumps remotely
    A message posted at WOODWEB's CNC Forum (3/27/22) -- Is there a loss of suction with the distance? From my Understanding, the pump needs to be close ...

    Re: Production shoe moulding
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- Its feasible to do it that way. I haven't tried it myself though. Would just ...

    Re: Water based conversion varnish.
    A message posted at WOODWEB's Finishing Forum (3/27) -- Why do you need WB CV? There are plenty of great poly WB finishes out there. I personally hav ...

    Re: Solid wood scrap
    A message posted at WOODWEB's Solid Wood Machining Forum (3/27) -- Dustin: Not that there aren't already enough people making cutting boards, but.... ...

    Re: How to track all the change orders?
    A message posted at WOODWEB's Business and Management Forum (3/27) -- AIA. Lol. G702. G703. Would not be so chaotic if you charged for the paper work ...

    General 130 planer problem
    A message posted at WOODWEB's Solid Wood Machining Forum (3/27) -- The feed rollers on our General 130 planer are not engaging. I believe we got the ...

    Re: Time clock
    A message posted at WOODWEB's Business and Management Forum (3/27) -- I use TimeStation as well. It is pretty basic and is free for up to 10 employee ...

    Re: Getting Dark Brown Stain
    A message posted at WOODWEB's Finishing Forum (3/27) -- Saman stains are pretty intense, don't raise the grain, and water clean-up. ...

    Re: SBA Economic Injury Disaster Loans
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Matthew, There is another discussion about the virus, in yesterdays press confe ...

    Stain/glaze sealer for ceruse style hardwax oil finish
    A message posted at WOODWEB's Finishing Forum (3/27) -- We are trying to create a professional looking cerused oak finishing schedule using water bas ...

    Re: SBA Economic Injury Disaster Loans
    A message posted at WOODWEB's Business and Management Forum (3/27) -- The main thing about the current situation is that this is Not like 2008 Recess ...

    Re: SBA Economic Injury Disaster Loans
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Pat, The dilemma I see is that we are going to get the virus in check in a few ...

    Re: frameless inset cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- Used this method of construction to build cabinets with a beading surrounding the cabs th ...

    Re: SBA Economic Injury Disaster Loans
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Matthew That is true and hard to predict for sure, at some point the hyperbole ...

    Re: cabinet construction method question
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- If the cabinets are not going up to the ceiling, you can put a nailer up top where it won ...

    Re: SBA Economic Injury Disaster Loans
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Alan, Again, I'm trying not to be too pessimistic. I'm curious what you are bas ...

    Re: Labels that actually stick to cut MDF edges??
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- We use Relm West for labels. We over ordered in December and would like to sell some. Our ...

    Hettich Innotech drawer slide setup
    A message posted at WOODWEB's CAD Forum (3/27) -- I am using Mozaik and I am wondering if anyone has a set up for the Hettich innotech slides. I have ...

    Re: Stain/glaze sealer for ceruse style hardwax oil finish
    A message posted at WOODWEB's Finishing Forum (3/27) -- Sounds like a science experiment using dissimilar materials to see what'll stick. Won't the o ...

    Buffalo No. 18 drill press
    A message posted at WOODWEB's WOODnetWORK Forum (3/27) -- I have recently bought a Buffalo No. 18 drill press. I do not know much about it, but I can ...

    Re: cabinet construction method question
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- depends on what material your sides are out of. we do 3/4 sides and 1/4backs with nailers ...

    Re: finishing advice for vanity top
    A message posted at WOODWEB's Finishing Forum (3/27) -- 5 or more coats of Epifanes marine varnish. It's available in a matte sheen. I've used it on ...

    Re: Ipe Glue
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- I remember a job a lifetime ago. It was one of the first monster decks we did with ipe. I ...

    VT Solar Kiln Workshop 2019
    A message posted at WOODWEB's Sawing and Drying Forum (3/27) -- Drying Lumber with a Solar Kiln We will hold a two day program on drying lumber with ...

    Re: Crown molding
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/27) -- We've been using these since 2002. That video is an utter waste of ti ...

    Re: Ipe Glue
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- I built a pergola from ipe'. I used 3/4" and 1" ipe' dowels for the connections ...

    Re: Ipe Glue
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- Thanks for the well explained response Adam, I've done few outdoor decks out of Ipe, none ...

    Re: 1/2" or 3/4" pipe clamps?
    A message posted at WOODWEB's Furniture Making Forum (3/27) -- I too only use the 3/4" ones. Though they are a bit expensive I find them worth t ...

    Re: Ipe Glue
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- Adams advice needs to make it to HGTV and the like. Those are the prime drivers for our r ...

    Re: Ipe Glue
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- Sounds about like pressure treated to me. You take all the pains in the world to make thi ...

    Re: Spraying heavy table top at residence
    A message posted at WOODWEB's Finishing Forum (3/27) -- Get a zip wall system they work great. You can get them at most big box stores or ebay etc... ...

    Re: pocket/flipper door hardware
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- We use a cable system from Hafele. I will not use any pocket system that is not a cable s ...

    Re: Crown molding
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/27) -- There is no one in his right mind who would want to cut like that It ...

    Re: pocket/flipper door hardware
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- I like the KV. If you don't have any issues keep using them. ...

    Re: Biesse bSolid or Wood CAD Cam
    A message posted at WOODWEB's CAD Forum (3/27) -- Biesse Bsolid Hell portal ...

    Re: Still sawing
    A message posted at WOODWEB's Business and Management Forum (3/27) -- "I realized right then that I would have a lot better success closing sale ...

    Re: Still sawing
    A message posted at WOODWEB's Business and Management Forum (3/27) -- I had an oak breadbox business. I sold to every mom & pop kitchen store fro ...

    Re: Still sawing
    A message posted at WOODWEB's Business and Management Forum (3/27) -- When I first started, it was a slow go. Then I found 1 really good vendor for m ...

    Re: Door & Window Cladding
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- Euro cladding is easy to install with simple jigs for locating the clips. Whe ...

    Re: Stain issues
    A message posted at WOODWEB's Finishing Forum (3/27) -- Hey Mike, yes specifically I use ML Campbell Woodsong 2 stain base with no color to "sea ...

    Re: Rub Throughs
    A message posted at WOODWEB's Finishing Forum (3/27) -- I suggest not "sanding" between coats as just thinking that your sanding has you in ...

    Re: tambour doors
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- Another way to join them besides gluing to canvas, is to drill holes through the edges an ...

    Re: Still sawing
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Your time in production should be able to carry overhead and wages to the tune ...

    Having glue line problems with HolzHer bander
    A message posted at WOODWEB's Solid Wood Machining Forum (3/27) -- I've run into a problem with my HolzHer edgebanders glue flow. It seems as though ...

    Keeping Lumber Dry
    A message posted at WOODWEB's Sawing and Drying Forum (3/27) -- Not really sure where to post this, but I know Dr Gene is here at times, so.... We ha ...

    Re: Still sawing
    A message posted at WOODWEB's Business and Management Forum (3/27) -- I PM'ed you yesterday with my contact details. Why in the world would you want ...

    Re: Line boring or CNC boring
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- Dont forget to look at used market. I sold my Biesse Rover B with a 4x10 flat table that ...

    Re: Still sawing
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Hey, Dumbass (I do like saying that), I like your idea of sending free samples ...

    Re: Door & Window Cladding
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- Thank you Joe for your clarity. I build all types of windows and can use the ...

    Best router bit to cut expanded polyethylene foam?
    A message posted at WOODWEB's CNC Forum (3/27) -- Can someone advise on the best router bit to use to cut 30mm thickness expanded polyethylene foam – ...

    Re: tambour doors
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- Yes it would need to go over the top. So maybe I need to make it interlocking or a cable ...

    Re: Stain issues
    A message posted at WOODWEB's Finishing Forum (3/27) -- Jeff, I used Mohawk vandyke brown dye on the raw door, I didn’t drench it. Then I used Mohawk ...

    Grizzly G0525
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (3/27) -- I have a grizzly G0525 collector that I have been using on a 36&q ...

    Re: Best router bit to cut expanded polyethylene foam?
    A message posted at WOODWEB's CNC Forum (3/27) -- Have machined through 63.5mm (2.5" thick) polystyrene with many of the bits offered by Onsrude ...

    Cross country furniture shipping
    A message posted at WOODWEB's Business and Management Forum (3/27) -- This question may have been posted in the past- Looking for a way to get two ch ...

    Re: Still sawing
    A message posted at WOODWEB's Business and Management Forum (3/27) -- "Dont know what else to tell you." No mention of labor costs. Materia ...

    Re: Best router bit to cut expanded polyethylene foam?
    A message posted at WOODWEB's CNC Forum (3/27) -- Try Datron. They make some pretty nice bits for foam. Not cheap. https://www.datron.com/tools/foam- ...

    Re: tambour doors
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- I think that sounds feasible. Maybe if I also had a set of springs and block in the back ...

    Re: Should cabinet backs be recessed?
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- I've read somewhere to use recessed backs for the sake of ventilation. ...

    Re: deep mortise bit
    A message posted at WOODWEB's CNC Forum (3/27) -- Gary, So you over cut by .005 for the first .375" depth? Or am I not understanding. Thanks, Ge ...

    Re: Hiring Employees
    A message posted at WOODWEB's Business and Management Forum (3/27) -- I agree with Bill about hiring inexperienced people rather than veterans. Most ...

    Re: 180° Curved Staircase
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- @Adam: I'm at the point where I'm experimenting with my methods. The basement ...

    Re: can I ask for advice on buying a dependable 4wd truck to use in the woo
    A message posted at WOODWEB's Forestry Forum (3/27) -- My truck has a private party sale price estimate of about $11,000. I expect the same truck wit ...

    Re: Total Cost of Ownership pickup Truck example
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Hi, You need a CPA that is both a good accountant and can help with business. M ...

    Re: How fast will mold show up on green lumber?
    A message posted at WOODWEB's Sawing and Drying Forum (3/27) -- I agree with Gene and the speed also. 95% of the time I sticker mine every few hours ...

    Re: 180° Curved Staircase
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- The stick work in the last photo is the heart of the curved stairs, with 1-1/ ...

    Re: Swirl Marks in Unfinished Wood
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- The biggest tricks to avoiding swirls is light pressure and not over sanding. You don't m ...

    Re: Tinting Sherwood Sealer T67F3
    A message posted at WOODWEB's Finishing Forum (3/27) -- BAC (Blend-a-color) is very bland pigment. It looks muddy, and never really penetrates (just ...

    Re: Total Cost of Ownership pickup Truck example
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Mr. Alan, Sounds like you are a good businessman and have found a good tax pro ...

    Re: 180° Curved Staircase
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- I think this system is a labor, material, weight and fuss saver over other me ...

    Re: 180° Curved Staircase
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- I get my vac bags from Ed Ferri @ qualityvak.com here in MA. Nice to deal wit ...

    Re: Tinting Sherwood Sealer T67F3
    A message posted at WOODWEB's Finishing Forum (3/27) -- l agree with BAC assessment; muddy with no binder pretty much sums it up. That said l use it ...

    Calculating timber deflection
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- I'm trying to find a calculator online that will tell me how much deflection ...

    How fast will mold show up on green lumber?
    A message posted at WOODWEB's Sawing and Drying Forum (3/27) -- I lack experience for a situation, and I'm sure many of you sawyers out there have de ...

    best way to paint trees for a first SYP plantation thin
    A message posted at WOODWEB's Forestry Forum (3/27) -- What are the standard ways or marks and colors to paint trees for a first SYP plantation thin ...

    Re: Finishing water based finishes
    A message posted at WOODWEB's Finishing Forum (3/27) -- Kem-Aqua is my go to WB and l get good results with it. Both the clear and the pigmented. As ...

    Re: 180° Curved Staircase
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- I'm no expert curved stair builder by any means but I have made three so far ...

    cabnetworks 10.0 drawer issues
    A message posted at WOODWEB's CAD Forum (3/27) -- cabnetworks 10.0 drawer issues. I just bought a new computer running windows 10 switched over my pr ...

    Re: Finishing water based finishes
    A message posted at WOODWEB's Finishing Forum (3/27) -- i've heard great things about the ICA line..... we have the 06-072 tip, and we were told the ...

    Re: 180° Curved Staircase
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- David, those look like they are half lapped poplar frames? With a plywood rei ...

    Re: 180° Curved Staircase
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- I build my stairs quite differently, but the outcome is very good. I learned ...

    Re: Finishing water based finishes
    A message posted at WOODWEB's Finishing Forum (3/27) -- We have been using ICA water base coatings had lots of trouble with getting a great finish wi ...

    Re: Tinting Sherwood Sealer T67F3
    A message posted at WOODWEB's Finishing Forum (3/27) -- Wow. Well, being that I am in the sample stage of this project, I can change it up. I was usi ...

    Re: Tinting Sherwood Sealer T67F3
    A message posted at WOODWEB's Finishing Forum (3/27) -- Here is a photo of the first sample I played with. It is the schedule above, with different t ...

    Re: scuffing between coats of CV
    A message posted at WOODWEB's Finishing Forum (3/27) -- I would recommend our 5" 5 hole fine or very fine sanding pads. I like the 5 hole in the ...

    NC Hops CAM software
    A message posted at WOODWEB's CAD Forum (3/27) -- Hallo! We have been using NC Hops software for Holzher Evolution machine in our factory. Due to som ...

    Re: sanding
    A message posted at WOODWEB's Finishing Forum (3/27) -- Look into the carborundum premier red paper. Im sure there are others as good, but its the be ...

    Re: Hiring Employees
    A message posted at WOODWEB's Business and Management Forum (3/27) -- We have had good luck with craigslist. We have many friends of friends anf fami ...

    Re: Tinting Sherwood Sealer T67F3
    A message posted at WOODWEB's Finishing Forum (3/27) -- Exactly.... We have the full line of D59 Tints with a 3 row fillon dispensing machine and gra ...

    Re: 180° Curved Staircase
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- David, it looks like you are applying a thick skin to your stringer frame wor ...

    Re: AutoCad vs All others
    A message posted at WOODWEB's CAD Forum (3/27) -- As others have said draftsight could probably work for you. One feature it lacks is dynamic input, ...

    Re: Calculating timber deflection
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- Perfect! Thanks very much. Funny thing is I tried that calculator before and ...

    Re: Long media cabinet top
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- Actually you can do some cool finishes directly on mdf,, as a flat surface on regular mdf ...

    Re: Finishing water based finishes
    A message posted at WOODWEB's Finishing Forum (3/27) -- Use denatured alcohol as your final wash. Its very aggressive on wb, drys the moisture out of ...

    Re: Question, sandingmaster convert to 220v
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- The best thing to convert a sandingmaster to is a boat anchor. I'm sad to see so many sti ...

    Re: Long media cabinet top
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- stanard textured toolpathing in vectric VCP or aspire, I use a 2" ball nose bit and ...

    Re: double end tenoner work
    A message posted at WOODWEB's Solid Wood Machining Forum (3/27) -- Simple parts all the same. About 14" long, 2" wide, 3/4" thick with ...

    Re: Hiring Employees
    A message posted at WOODWEB's Business and Management Forum (3/27) -- When it comes to other shops employees, look at why they would leave and how th ...

    Re: How fast will mold show up on green lumber?
    A message posted at WOODWEB's Sawing and Drying Forum (3/27) -- it depends on how warm it is. Mold can begin in a day of warm weather, especially if ...

    Re: Finishing water based finishes
    A message posted at WOODWEB's Finishing Forum (3/27) -- Try Valspar's Zenith line of finishes. I've been using it for years and have no complaints. I ...

    Re: Tinting Sherwood Sealer T67F3
    A message posted at WOODWEB's Finishing Forum (3/27) -- Ditto about BAC stains. Extremely MUDDY. Perfect for cheap builders using Poplar as a 'stain ...

    Re: Glue and Dowels
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- I done extensive testing before committing and the preglued held as well or better,and a ...

    Re: Tinting Sherwood Sealer T67F3
    A message posted at WOODWEB's Finishing Forum (3/27) -- Here is the photo of the sample board along with the casing they gave me to match for the cab ...

    Re: Calculating timber deflection
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- Try this site: http://www.woodbin.com/calcs/sagulator/ ...

    Re: Long media cabinet top
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- I would like to see it. Apparently that is still popular? ...

    Re: Long media cabinet top
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- Jim what did you use to cad/cam that finish? ...

    Re: double end tenoner work
    A message posted at WOODWEB's Solid Wood Machining Forum (3/27) -- I meant to say what is it? ...

    Re: Long media cabinet top
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- And Profitable ! ...

    Re: Crating fees
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Every time I have done this, it seems it ends up including my time, plus the ti ...

    Alphacam training resources
    A message posted at WOODWEB's CNC Forum (3/27) -- I work in a small shop that's just getting started with our first CNC machine (Weeke Vantage 200). ...

    Re: Priming Poplar Wood Trim
    A message posted at WOODWEB's Finishing Forum (3/27) -- I use Chemcraft Aquaprime, dry time seems to be about like the primer mentioned above. As far ...

    Re: cleaning trunnions
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (3/27) -- I have seen Marvel Mystery Oil in auto parts stores, and also in ...

    epoxy glue for solid edge plywood
    A message posted at WOODWEB's Adhesives Forum (3/27) -- hi, i need to glue 1/4 solid birch to 3/4 plywood edges, (should dry 30min or 45 most , I don ...

    Re: Designed to fail
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- In a recent contract and on the drawings , I wrote we can not and will not gu ...

    Re: CNC Reviews and Support
    A message posted at WOODWEB's CNC Forum (3/27) -- Not sure what your budget is, but our shop is similar in scope and size. I have driven most of the ...

    Re: Pull out spacers.
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- All drawers would be easy for me as well, but at the end, is not my decision, i do try to ...

    Re: Designed to fail
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- Sometimes, if they want it upside down and purple, you make it upside down an ...

    Re: Designed to fail
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- Just make the first line of your contract read something like; Built per desi ...

    Re: Crating fees
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Unless you bring in some cheap help to build the crates, they cost the same hou ...

    Re: Crating fees
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Check with the shipping company as some offer this service and they will insure ...

    Re: CNC Reviews and Support
    A message posted at WOODWEB's CNC Forum (3/27) -- Thank You everyone for the great responses. This is the kind of information I was looking for. ...

    time saver
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- looking to buy a time saver what would 20,000 get me what are cabinet makers using thanks ...

    Re: Counter Profile Shoe - 5 head molder
    A message posted at WOODWEB's Solid Wood Machining Forum (3/27) -- Thanks for the responses. I think i'll try a couple of these. ...

    Re: Portfolio
    A message posted at WOODWEB's Business and Management Forum (3/27) -- I'm on to something. I'll report in a few. ...

    Re: Insulated Glass spacer blocks
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- To all: I am Mark Ledvina from Green Mountain Glass. I am very honored to be ...

    Re: Started charging for design/bids
    A message posted at WOODWEB's Business and Management Forum (3/27) -- We will not bid a job without a customer meeting at our Shop/office. We do prov ...

    Plagued by lacquer orange peel
    A message posted at WOODWEB's Finishing Forum (3/27) -- I have been spraying lacquer for 15 years in my garage but I have only had consistent success ...

    TPS, idealism and the rest.
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Seeing as I'm a messy thinker and you folks are good at untangling knots.... So ...

    Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
    A message posted at WOODWEB's Business and Management Forum (3/27) -- The mechanism by which the money supply is increased: Federal reserve makes new ...

    Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
    A message posted at WOODWEB's Business and Management Forum (3/27) -- "1) Do you think the money supply should be regulated? If so, by what mech ...

    Re: Started charging for design/bids
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Agree with Tim and much that has been said here. We take a calculated risk goin ...

    Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
    A message posted at WOODWEB's Business and Management Forum (3/27) -- As long as we are going to go full magilla on this, Mel should look up fraction ...

    Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Paul, So true, so once again it comes back to the politicians. I also only inte ...

    Full overlay diagonal corner cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- I am doing full overlay for the first time and am wondering where to fudge on the corner ...

    Re: WideBelt Sander problem....
    A message posted at WOODWEB's Solid Wood Machining Forum (3/27) -- Hi Adam, I was using an 80 grit belt to flatten the panels. Except it just wasn't ...

    CNC cut issues
    A message posted at WOODWEB's CNC Forum (3/27) -- Wondering if anyone has some trouble shooting ideas. I am having some issues with my dowel hole loc ...

    Re: Started charging for design/bids
    A message posted at WOODWEB's Business and Management Forum (3/27) -- I have been charging for estimates and design for a while now. I feel that if s ...

    Re: Old tablesaw
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- I used to have a Unisaw for which I rigged up a dust chute attached to the dust deflector ...

    Re: Aromatic cedar for decking
    A message posted at WOODWEB's Sawing and Drying Forum (3/27) -- I have 2 acres of structures that are sided with ERC including our house. Our house h ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (3/27) -- This machine is a pin router. It can be used for many types of pattern work, shape ...

    Re: Split headboard
    A message posted at WOODWEB's Furniture Making Forum (3/27) -- What's the joinery to the leg? Hopefully not glued mortise and tenons top and bottom. ...

    Re: Which low-cost Spindle Shaper/moudler
    A message posted at WOODWEB's Solid Wood Machining Forum (3/27) -- First question is - if you know nothing about them, why do you think you need one? ...

    Re: TPS, idealism and the rest.
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Did you finish "The Goal"? The 2014 Kindle edition has a postscript o ...

    Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Pat (Revere), I have two questions that may or not be related: 1) Do you think ...

    Re: Managerial Advice
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Hey again everyone, Thanks again to all who have posted. So far it's been going ...

    Split headboard
    A message posted at WOODWEB's Furniture Making Forum (3/27) -- I recently built this solid cherry bed. After delivery (bout 2 weeks) the client calle ...

    Re: Wood Identification
    A message posted at WOODWEB's Sawing and Drying Forum (3/27) -- The image itself is large enough but not clear enough, and even if it had been unfort ...

    Re: CNC cut issues
    A message posted at WOODWEB's CNC Forum (3/27) -- There can be a variety of reasons. Is this a pod and rail machine, or a nested based router? Need t ...

    Re: Uneven widebelt sanding
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- Thanks Adam. You described exactly what was going on. Too much pressure from the platen. ...

    Re: planer sanders
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- We have a 37" planer sander and can take as little off as we would like. Want to rem ...

    Re: Uneven widebelt sanding
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- Adam, You have the most informative posts on sanding, equipment, technique etc. that I've ...

    Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Huh! Funny, i always thougt it was a simple question, but ever failed to get a ...

    Re: Surfprep sander! We're talking airsanding moulding here, folks.
    A message posted at WOODWEB's Solid Wood Machining Forum (3/27) -- David, Adam is right, he's not blowing smoke. I have found the SurfPrep system to ...

    Re: Plagued by lacquer orange peel
    A message posted at WOODWEB's Finishing Forum (3/27) -- Probably nothing to do with the spray system, you're trying to get material to flow in a refr ...

    Pocketing MDF
    A message posted at WOODWEB's CNC Forum (3/27) -- Good morning All. Is there any bit style/geometry that is better than others for the bottom of a po ...

    Re: Full overlay diagonal corner cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- I drew it w/ 3/4" overlay on the doors and a 3/4" strip by the fridge. Everythi ...

    Re: Wood Identification
    A message posted at WOODWEB's Sawing and Drying Forum (3/27) -- Here's a fresh cut from a piece of the trim I had leftover. I hope this helps better. ...

    Quality Grizzly 30 sawmill
    A message posted at WOODWEB's Sawing and Drying Forum (3/27) -- Has anyone ever owned used or seen a Grizzly 30 hydraulic bandmill? They are made in ...

    Re: Stave core stiles & rails supplier West Coast
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- Not exactly coastal but I bought a nice product from Aegeson @ http://www.doo ...

    Re: What are you using to spray water based paints and finishes?
    A message posted at WOODWEB's Finishing Forum (3/27) -- Denny, have you also used the apollo and fuji top quality guns? But still prefer the accuspra ...

    Re: Aromatic cedar for decking
    A message posted at WOODWEB's Sawing and Drying Forum (3/27) -- It is quite soft. It will turn grey quickly. Unless you use old growth and all heartw ...

    Re: Clamp for conference table
    A message posted at WOODWEB's Cabinetmaking Forum (3/27) -- Try the P-system from Lamello. We've run a couple of test slots here in Corian and it wor ...

    Re: TPS, idealism and the rest.
    A message posted at WOODWEB's Business and Management Forum (3/27) -- Confirmed. You are a messy thinker. What is the question? ...

    Re: Plagued by lacquer orange peel
    A message posted at WOODWEB's Finishing Forum (3/27) -- Use a reducer and turn the heat up in the shop. ...

    Domino df 700
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- pros cons tips suggestions of Domino df 700. ...

    Re: Steam Bending 2" thick walnut
    A message posted at WOODWEB's Furniture Making Forum (3/27) -- Thank you all for your suggestions. It's funny, I actually was looking to steam becaus ...

    refectory table slides
    A message posted at WOODWEB's Furniture Making Forum (3/27) -- A customer ordered a dutch pullout table, then changed his mind; instead he wants a re ...

    Re: Scribing a loose stile
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/27) -- You asked, "Chuck, when you set the loose stile back an inch and ...

    Re: Exterior Bay Window
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- Jim, Red cedar will work, but I would go with African Mahogany if you have ac ...

    Cantek EM-12 Endmatcher
    A message posted at WOODWEB's Solid Wood Machining Forum (3/27) -- Anyone have any experience with Cantek EM-12 end matcher? We just bought one a few ...

    Exterior Bay Window
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- Looking for advice on building an large arched bay window. It doesn't have an ...

    Re: Veneer over solid ash
    A message posted at WOODWEB's Veneer Forum (3/27) -- I would stay away from MDF for drawers. It has a hard time supporting itself, much less files. I ...

    Veneer over solid ash
    A message posted at WOODWEB's Veneer Forum (3/27) -- I have some file drawers about 13" wide and anywhere from 14-33" long. Two rows of the ...

    Re: Steam Bending 2" thick walnut
    A message posted at WOODWEB's Furniture Making Forum (3/27) -- Selection of your walnut stock will really be important. Only stock that has the grain ...

    Re: Coping saw teeth direction
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/27) -- Mark, Thanks for the response. I hope that you will have the time to ...

    Re: Coping saw teeth direction
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/27) -- In response to Rick- I do have a higher bench (42") for my chop ...

    Re: Microvellum 6.7
    A message posted at WOODWEB's CAD Forum (3/27) -- Try right clicking on the upper edge, or is it the inboard edge. I can't remember. I am using toolb ...

    Re: Coping saw teeth direction
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/27) -- It's just 2 pieces of stock screwed together at 90 deg. with a cleat ...

    Re: Veneer over solid ash
    A message posted at WOODWEB's Veneer Forum (3/27) -- Thanks Dave. Its an applied drawer front with a profile on the top edge instead of a pull... fin ...

    Re: Microvelum with RouterCim
    A message posted at WOODWEB's CAD Forum (3/27) -- While it would be an additional expense using routerCIM to do the nesting and machining would be a ...

    Re: Shaper Spindle
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- You might look at the parts list for a similar Grizzly shaper. They might hav ...

    Re: Steam Bending 2" thick walnut
    A message posted at WOODWEB's Furniture Making Forum (3/27) -- Green lumber is better than air dried for steam bending. It is also helpful to have a ...

    Re: Shaper Spindle
    A message posted at WOODWEB's Architectural Woodworking Forum (3/27) -- Contact this company. I believe they can help. It's the people who used to se ...

    Re: Veneer over solid ash
    A message posted at WOODWEB's Veneer Forum (3/27) -- To add to this.... ash is 1/16" thick for face....Would be pressed with unibond in a bag... ...

    Re: Laminating IPE
    A message posted at WOODWEB's Adhesives Forum (3/27) -- The adhesive mentioned is a PUR. It cures using moisture in the wood. With such a dense wood, ...

    Re: Steam Bending 2" thick walnut
    A message posted at WOODWEB's Furniture Making Forum (3/27) -- and then there is compressed wood. google it ...

    Re: Question about pressure sensitive veneer over latex paint
    A message posted at WOODWEB's Veneer Forum (3/27) -- as long as the paint is sound and not chipping or flaking off and there is no potential for the ...

    Edge jointing: Festool Domino vs. biscuit jointer
    A message posted at WOODWEB's WOODnetWORK Forum (3/27) -- I have been disappointed in the biscuit jointer's ability to align boards edge-joined into ...

    Re: Question about pressure sensitive veneer over latex paint
    A message posted at WOODWEB's Veneer Forum (3/27) -- I have used the 3m product many times over alot of painted surfaces only after they were sanded ...

    Suggestions on a color spectrometer?
    A message posted at WOODWEB's Finishing Forum (2/27/24) -- We're at a point now in our finishing that we're considering buying a spectrometer. We are ...

    Refaceing cabonets with a paint grade veneer choice
    A message posted at WOODWEB's Finishing Forum (2/27/24) -- Refacing veneer. My client has red oak face frames. The want to not see any grain. I am pa ...

    Re: Is this a balanced panel?
    A message posted at WOODWEB's Veneer Forum (2/27/24) -- Considering the requirement for the backer to be the same thickness as the face panel, you mi ...

    Re: Dry Pine log weight estimation
    A message posted at WOODWEB's Sawing and Drying Forum (2/27/24) -- I’m not so sure that your photo matches what you stated for the diameter. If the d ...

    Re: Edgebander restarts
    A message posted at WOODWEB's Business and Management Forum (2/27/24) -- What are some common causes for random frequent restarts in computers, and w ...

    General Table Saw 550 parts
    A message posted at WOODWEB's Cabinetmaking Forum (2/27/24) -- I bought a used General 550 Table saw 7.5 HP. The gears that let it raise and lower th ...

    Re: Refaceing cabonets with a paint grade veneer choice
    A message posted at WOODWEB's Finishing Forum (2/27/24) -- Do not resurface the face frames with veneer. That will fail. Use 1/4" solid maple st ...

    Edgebander Grease
    A message posted at WOODWEB's Cabinetmaking Forum (2/27/24) -- What is everyone using for edgebander grease for the gluepots? What temp rating does i ...

    Re: Finish Stripping
    A message posted at WOODWEB's Finishing Forum (2/27/24) -- Contact Benco sales They sell industrial grade stripper. They will know whom to contact in ...

    Re: CNC cutting Aluminum panel Materials.
    A message posted at WOODWEB's Cabinetmaking Forum (2/27/23) -- Nothing simple about cutting aluminum in my book. Lots of different alloys and some ar ...

    Re: CNC cutting Aluminum panel Materials.
    A message posted at WOODWEB's Cabinetmaking Forum (2/27/23) -- I may be wrong but the Wilsonart product is probably an aluminum foil bonded to a HPL ...

    Re: New Sawyer w/new solar kiln needs help
    A message posted at WOODWEB's Sawing and Drying Forum (2/27/23) -- I bought a Delmhorst moisture meter J-2000 used for $190.00 on Facebook. It works ...

    SCM Pratix hand held device
    A message posted at WOODWEB's CNC Forum (2/27/23) -- Hi The hand held device on my SCM pratix doesn't show more than one loadable file at the time, e ...

    Re: CNC cutting Aluminum panel Materials.
    A message posted at WOODWEB's Cabinetmaking Forum (2/27/23) -- I was under the impression it’s pretty simple to cut aluminum. I’m getting set up to t ...

    Re: drying hickory
    A message posted at WOODWEB's Sawing and Drying Forum (2/27/23) -- After 3-4 years it will probably get as dry as it can by air drying. It depends on ...

    Re: CNC cutting Aluminum panel Materials.
    A message posted at WOODWEB's Cabinetmaking Forum (2/27/23) -- Any chance you can just cut them on a slider with a scoring blade, or no scoring blade ...

    Re: CNC cutting Aluminum panel Materials.
    A message posted at WOODWEB's Cabinetmaking Forum (2/27/23) -- Well then I might have run ahead of myself when I bought two bits for cutting aluminum ...

    Re: humidity control
    A message posted at WOODWEB's Finishing Forum (2/27/23) -- Thanks Leo. I dont know much about hvac. I had the unit professionally installed. Is there ...

    Re: humidity control
    A message posted at WOODWEB's Finishing Forum (2/27/23) -- Absolutely. Just about any house that has a forced air system will have one. ...

    Re: Library Ladder
    A message posted at WOODWEB's CAD Forum (2/27/23) -- https://freecadfloorplans.com/library-rolling-ladder-autocad-block/#google_vignett e ...

    Re: Maintenance cost of cnc
    A message posted at WOODWEB's CNC Forum (2/27/23) -- Depends on the machine and what you do with it and yours abilities. ...

    Re: drying hickory
    A message posted at WOODWEB's Sawing and Drying Forum (2/27/23) -- Thats great. I'll move them inside this summer. thanks! ...

    Hemisphere shelf
    A message posted at WOODWEB's CNC Forum (2/27/23) -- The original design solution. Does anyone have a model of this shelf? ...

    Re: Library Ladder
    A message posted at WOODWEB's CAD Forum (2/27/23) -- Google this ,, library ladder dxf file ...

    Re: Edge Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (2/27/22) -- Chris My version has the rollers on the top pressure beam and just a single fee ...

    Re: Hidden structural connector steel to wood
    A message posted at WOODWEB's Furniture Making Forum (2/27/22) -- MarkB: I would think that Rivnuts and the bedrail fasteners are the way to go. If t ...

    Re: Making large paint grade doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/27/22) -- I remember this form a few years ago I would never post it was too aggressive. I start ...

    Re: Edge Sander
    A message posted at WOODWEB's Solid Wood Machining Forum (2/27/22) -- I have the Kundig without the power feed and like it a lot. The split fence wor ...

    Re: Skinning
    A message posted at WOODWEB's Finishing Forum (2/27/22) -- We have light metal fab in the shop as well and have Argon and CO2 mix gas bottles for mig ...

    Ritter style clamp system build
    A message posted at WOODWEB's Cabinetmaking Forum (2/27/22) -- Just interested if anyone has built a clamp similar to the Ritter one for use for buil ...

    Re: Intro to Marketing Cabinet Business
    A message posted at WOODWEB's Business and Management Forum (2/27/22) -- Your best source of leads are past customers. They’re also the cheapest lead ...

    Blum
    A message posted at WOODWEB's Cabinetmaking Forum (2/27/22) -- I was short 4 sets of 21” tandems,so I had to steal them from draws I had at shop.I ha ...

    Re: Hidden structural connector steel to wood
    A message posted at WOODWEB's Furniture Making Forum (2/27/22) -- Could you weld a 2”x1/2” rod onto the steel, drill a hole in the endgrain of the ma ...

    Re: Blum
    A message posted at WOODWEB's Cabinetmaking Forum (2/27/22) -- My New Yankee Workshop translator is currently down... Out of Blum? This can't be! Mig ...

    Re: Intro to Marketing Cabinet Business
    A message posted at WOODWEB's Business and Management Forum (2/27/22) -- Join your local Chamber of commerce, face to face marketing is awesome, it w ...

    Re: Hidden structural connector steel to wood
    A message posted at WOODWEB's Furniture Making Forum (2/27/22) -- Thanks Nate, Avoiding any welding/fabrication (liability) and we were moreso lookin ...

    Cabinet vision drafter
    A message posted at WOODWEB's CAD Forum (2/27/22) -- Looking for Cabinet vision drafter that can designs drawing for me. I will supply all dimensions ...

    Re: Skinning
    A message posted at WOODWEB's Finishing Forum (2/27/22) -- Good tips, I may try the Argon. Thanks ...

    Re: CAM
    A message posted at WOODWEB's CAD Forum (2/27) -- There are a lot of different software packages and system that people use out there. Many do many t ...

    Precise Cross Cut Sled
    A message posted at WOODWEB's Solid Wood Machining Forum (2/27) -- My 30 year old sleds did not fit new table saw due to spacing of miter slots. Gave ...

    Re: On site kitchen cabinet painting
    A message posted at WOODWEB's Finishing Forum (2/27) -- I can try to help you That's what I do 50% of my time As far as protecting walls,floors,etc B ...

    Re: Machinery values
    A message posted at WOODWEB's Business and Management Forum (2/27) -- I love tools, I have to have everyone I see. I could have retired years ago wit ...

    On site kitchen cabinet painting
    A message posted at WOODWEB's Finishing Forum (2/27) -- I've had several inquiries from customers to paint their kitchen cabinets on site but I've ne ...

    Re: On site kitchen cabinet painting
    A message posted at WOODWEB's Finishing Forum (2/27) -- Joel First thing first In my first reply,I stated that it is only 50% of my time so this is i ...

    Re: On site kitchen cabinet painting
    A message posted at WOODWEB's Finishing Forum (2/27) -- Seems like we think alike! I have a couple of compressor I have the rolair vt 25 a 2.5 hp tha ...

    Refinishing
    A message posted at WOODWEB's Finishing Forum (2/27) -- I have just installed a new quartz top on a set of existing cherry cabinets. Cabinets have be ...

    Re: Refinishing
    A message posted at WOODWEB's Finishing Forum (2/27) -- I've done it before Cabinets wasn't too bad,there was some spots that needed to be touched up ...

    Re: Maintaining MC After Kiln Drying
    A message posted at WOODWEB's Sawing and Drying Forum (2/27) -- I should have added that the idea of lasting wrap or even in a shipping container, is ...

    Re: Curved benches
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- Like others, I think these questions and ideas should have been hashed over b ...

    Re: CAM
    A message posted at WOODWEB's CAD Forum (2/27) -- David won't Microvellum do that? If not something in conjunction with Cadcode may do the trick To m ...

    Re: On site kitchen cabinet painting
    A message posted at WOODWEB's Finishing Forum (2/27) -- Stan I just use 1 compressor Most pump don't use as much air like your standard spray guns I ...

    Re: Refinishing
    A message posted at WOODWEB's Finishing Forum (2/27) -- Hire a finisher and then mark up their estimate and charge the customer. Refinishing is not e ...

    antique bar hardware
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I am refinishing an english art deco bar and am looking for a source for the rocker hardw ...

    Re: New Bander SCM ME-20
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Does anyone have any experience with the MAKSIWA brand? My machinery guy told me about th ...

    Re: kitchen island installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (2/27) -- I have seen a lot of projects where they either use a steel support p ...

    Re: On site kitchen cabinet painting
    A message posted at WOODWEB's Finishing Forum (2/27) -- Not to intrude but, where are you guys finding these re-paint customers? I was all about gett ...

    Re: On site kitchen cabinet painting
    A message posted at WOODWEB's Finishing Forum (2/27) -- Question for mastercabman.... are you using one of the compressors for spray gun and one for ...

    Re: On site kitchen cabinet painting
    A message posted at WOODWEB's Finishing Forum (2/27) -- Thanks guys!!! Joel, my jobs are coming mostly from customers that we built kitchens for year ...

    Re: On site kitchen cabinet painting
    A message posted at WOODWEB's Finishing Forum (2/27) -- Thanks mastercabman. I use MLC products also and have a CAT 14:1 AAA system. How do you provi ...

    Re: Refinishing
    A message posted at WOODWEB's Finishing Forum (2/27) -- Is that Magnklear a conversion varnish and I don’t think spraying in this house is a option. ...

    Re: SW Pre Cat Lacquer
    A message posted at WOODWEB's Finishing Forum (2/27) -- What you mean have to buy 5 gallons I have them mix me 1 gallon cans all the time. ...

    Re: Source for desk leg
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- This website also has a lot of replacement table legs and desk legs. ...

    Re: Maintaining MC After Kiln Drying
    A message posted at WOODWEB's Sawing and Drying Forum (2/27) -- Great - thanks again! ...

    Fusion 360 Pros and Cons
    A message posted at WOODWEB's CNC Forum (2/27) -- Curious on first impressions of Fusion 360. Someone I spoke to recently at an AWI event had an inte ...

    Re: Fusion 360 Pros and Cons
    A message posted at WOODWEB's CNC Forum (2/27) -- Ive been a Sketchp user from its start and have no loyalty. No comparison in my opinion. SU has zer ...

    Re: Fusion 360 Pros and Cons
    A message posted at WOODWEB's CNC Forum (2/27) -- I would agree that there isn't widespread adoption yet.I can think of two reasons for this;one is t ...

    Re: Loading and Unloading CNC Router
    A message posted at WOODWEB's CNC Forum (2/27) -- I think you need to watch your operator and make constant adjustments for them. Are all the panels ...

    Re: Twisted barn door
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Hey Mike, I sounds as if you were after some bit of a rustic look by the method you tried ...

    Melamine question
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- We don't do a lot of melamine work but occasionally run into a project that requires it. ...

    Re: Fusion 360 Pros and Cons
    A message posted at WOODWEB's CNC Forum (2/27) -- We run CabinetVision. After years of 20/20 and pattern systems with cut lists, I needed to make a d ...

    Re: Melamine question
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- We have a lot of issues with commodity melamine even with CNC. Parts through the bander, ...

    Re: Loading and Unloading CNC Router
    A message posted at WOODWEB's CNC Forum (2/27) -- Chris, let me see if I can answer your questions. 1, The Router is our current bottleneck. I need t ...

    Re: Fusion 360 Pros and Cons
    A message posted at WOODWEB's CNC Forum (2/27) -- For what it’s worth here is my work flow. Estimates, take offs, bids, RFI’s , project tracking, pun ...

    Re: Loading and Unloading CNC Router
    A message posted at WOODWEB's CNC Forum (2/27) -- Hi Rob, I usually do not comment here, I am a machinery salesman.... HAHA This subject is interesti ...

    Bypass doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Hey guys. I have an entertainment center to bid for a good previous customer of mine. The ...

    Twisted barn door
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I made a barn door out of pine 2x’s and the horizontal slats were done out of cedar fence ...

    Re: Bypass doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- We have a kitchen coming up with some bypass doors. I pinged my local Hettich rep to send ...

    Re: AutoCAD Detailing
    A message posted at WOODWEB's CAD Forum (2/27) -- The older method was to use FlatShot, and SectionPlane commands to get 3D Sections. For any "n ...

    AutoCAD Detailing
    A message posted at WOODWEB's CAD Forum (2/27) -- For the people that use AutoCad 3D for drafting, can you please share with me how you go about deta ...

    Re: Bypass doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Tony, can you take one of the doors off to see exactly what was used? I'm curious whether ...

    BIN under SW white lacquer
    A message posted at WOODWEB's Finishing Forum (2/27) -- HI I have to spray some book cases and some cabinets with Sherwin Williams white high build p ...

    Re: Stile/Rail door machine - opinions?
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Not sure why you wouldn't just invest in a couple basic shapers. Decent HD used shapers c ...

    Re: Stile/Rail door machine - opinions?
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Door Shop Guy, thank you for your input. Weaver tools setup look great but probably overk ...

    Re: BIN under SW white lacquer
    A message posted at WOODWEB's Finishing Forum (2/27) -- Nicko, Using laquer over BIN is a really bad idea. Dried BIN can be wiped off of surfaces wit ...

    Re: Stile/Rail door machine - opinions?
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I second the previous poster. For small scale production I bought an invicta 5 speed slid ...

    Re: Melamine question
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Jared, yeah, for just a few pieces that could work. I've done it before, but not practica ...

    Re: Fusion 360 Pros and Cons
    A message posted at WOODWEB's CNC Forum (2/27) -- Sketchup definitely seems to be on the rise but from what I've seen Fusion 360 has machining tools ...

    Re: Twisted barn door
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I built an interior door like that once a long time ago and i pretty much knew it would t ...

    Re: Fusion 360 Pros and Cons
    A message posted at WOODWEB's CNC Forum (2/27) -- I'm thinking the trend is more towards Sketchup because of ease of use and the ability to import co ...

    SCM Planer volt conversion 440v to 220v
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I recently purchased a 2001 SCM S630 planer that originally ran on 220volts, it now runs ...

    SCM Planer volt conversion 440v to 220v
    A message posted at WOODWEB's WOODnetWORK Forum (2/27) -- I recently purchased a 2001 SCM S630 planer that originally ran on 220volts, it now runs on ...

    Re: Sauna wood
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- Be careful using western red cedar. Some people are allergic to it. I know of ...

    Re: BIN under SW white lacquer
    A message posted at WOODWEB's Finishing Forum (2/27) -- If you are looking for problems down the road use the BIN. I wouldn't. I'd go and get some ap ...

    Re: Melamine question
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- If it's not a lot of parts, a good track saw might do a better job than your table saw if ...

    Re: Bypass doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I recommend the EKU bypass hardware. Sold by Hafele. I recently used the EKU 16 for a pro ...

    Re: Twisted barn door
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- no, just pull it, have a weiner roast (wait for the finish and stain to burn off before y ...

    Re: Help Fixing Mispaced Cabinet Drawer Pull Mounting Holes
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (2/27) -- Do yourself a favor and buy a tru position hardware jig.....you will ...

    Re: End Trimming on 45 Degree Shelves
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Quicktrim could you post a short video using this on end trims? Very interesting - didn't ...

    Re: SCM Planer volt conversion 440v to 220v
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Something doesn't add up. What country are we talking about? Are you talking 3 phase? I t ...

    Re: Bullet proof exterior wood coating
    A message posted at WOODWEB's Finishing Forum (2/27) -- Does anybody have any idea what a permitted spray booth is worth in So Calif? It's a 10' x 8' ...

    Re: Removing sharpie from raw veneer panel
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- Dry cleaners used to use acetone, they still might. But nothing is going to r ...

    Re: Twisted barn door
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Construction lumber is far from a little wet, it's really wet! Probably going to move eve ...

    Re: PROFILEMATIC V-1003 V-GROOVE MACHINE
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/27) -- Tom, Could you share those manuals with us as well. Please.... Kevin ...

    Re: Painting over melamine board
    A message posted at WOODWEB's Finishing Forum (2/27) -- I know some guys who run it thru a wide belt and spray 2k urethane on one side and the edges. ...

    Re: Value of Komo routers at auction
    A message posted at WOODWEB's CNC Forum (2/27) -- Mike But I don't see those at auction which may indicate the reality of Quick Trim's theory ...

    Re: BIN under SW white lacquer
    A message posted at WOODWEB's Finishing Forum (2/27) -- Thanks for the response Leo. Thats exactly what I'm going to do. Nicko ...

    Re: Bypass doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- if you wax the bottom edge of the doors they will slide without hardware. ...

    Re: Bypass doors
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- You might want to look at this hardware I have used this many times ...

    Spray Booth
    A message posted at WOODWEB's Finishing Forum (2/27) -- Does anyone have any idea what a certified spraybooth is worth in So Calif? ...

    Re: Twisted barn door
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- You need a stave core and veneers if you want a flat door ...

    Re: Melamine question
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- We have much better luck with mdf core melamine. ...

    Re: End Trimming on 45 Degree Shelves
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- looks like a sturdy little tool ...

    Re: Value of Komo routers at auction
    A message posted at WOODWEB's CNC Forum (2/27) -- Pat, Are you considering picking up a Komo ? ...

    Re: Finding older Grass
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- i have it tex310-3914750 ...

    Re: Sauna wood
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- Look into cypress ...

    Re: Parametric CAD/CAM for solid wood furniture machining
    A message posted at WOODWEB's CAD Forum (2/27) -- My business does not rely on iterations of previously designed items, but I do frequently have a pr ...

    Re: Parametric CAD/CAM for solid wood furniture machining
    A message posted at WOODWEB's CAD Forum (2/27) -- I hear the reservation not infrequently about doing things parametric, but i don't understand why. ...

    Re: 1" overlay euro hinge
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Hey Kevin, You’re pretty accurate about a solution here. I can think of 3 possibilities f ...

    Re: Reliable, simple touch-up spray gun for "in the house" touchup?
    A message posted at WOODWEB's Finishing Forum (2/27) -- Yes you can spray material super low pressure for touchups... what's more important here is h ...

    Re: Brandt Optimat KD 56
    A message posted at WOODWEB's Business and Management Forum (2/27) -- Look for a breaker in the second panel in the middle of the machine that's trip ...

    3D - Thoughts on system for drawing layers
    A message posted at WOODWEB's CAD Forum (2/27) -- Before i reinvent the wheel for the 1000th time ;-) do others of you out there use any sort of syst ...

    Re: latex paint drips on my vanity cabinet door
    A message posted at WOODWEB's Finishing Forum (2/27) -- Test a spot on a lower part of the vanity or the back of the door. Wipe some lacquer thinner ...

    Re: Reliable, simple touch-up spray gun for "in the house" touchup?
    A message posted at WOODWEB's Finishing Forum (2/27) -- Adam, thanks for that link to the Astro. About 10 years ago I worked at a shop that had a lit ...

    Re: CabinetPro
    A message posted at WOODWEB's CNC Forum (2/27) -- Been using CP for 15+ years. I started out before I had a CNC then upgraded to the CNC edition when ...

    Re: Veneer on softwood
    A message posted at WOODWEB's Veneer Forum (2/27) -- Since you would also have to edgeband the 3/4" edges why not use a decent grade of Walnut p ...

    Re: Reliable, simple touch-up spray gun for "in the house" touchup?
    A message posted at WOODWEB's Finishing Forum (2/27) -- I have found the small Preval system the best for in home touch up. Mix 5oz. of CV, 1 Tablesp ...

    Re: Knock-in insertion ram hinges
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Steven, Blum advises against using a mallet to knock in the hinges with soft close withou ...

    Re: pull outs
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Thank you for your responses. Since I wanted to use a 3/4" bottom in these I wasn't ...

    Polyline Direction
    A message posted at WOODWEB's CNC Forum (2/27) -- I have been using Biesse works for years. at a recent class the instructor informed me that in Auto ...

    Re: Parametric CAD/CAM for solid wood furniture machining
    A message posted at WOODWEB's CAD Forum (2/27) -- Scott I think it is useful to discern the difference between global parametrics and local pametrics ...

    Re: Reliable, simple touch-up spray gun for "in the house" touchup?
    A message posted at WOODWEB's Finishing Forum (2/27) -- We've used a couple of Astro's older mini guns for over 10 years. One is for stains and the o ...

    Re: Cabinetmaking
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I used to do a 3/8” panel, but switched to a 1/4” thick panel about two years ago and am ...

    Re: Wall backing
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- This is common in commercial jobs where metal studs are used but never seen it used in wo ...

    Re: pull outs
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I'm sorry about my last post, I must have made a mistake. I just fact checked myself and ...

    Re: 1" overlay euro hinge
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Correction on point #2: 2. If you must have the full 1” overlay, then your solution is co ...

    Re: Chemcraft Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (2/27) -- Hello ! The best way to compare those materials is to prepare a big panel, and apply side by ...

    Re: Knock-in insertion ram hinges
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Dennis, Thanks for the warning from Blum on damaging the soft close mechanism. I have to ...

    Veneer on softwood
    A message posted at WOODWEB's Veneer Forum (2/27) -- Hello all I currently have some doors to be done the interior architect want me to use poplar fr ...

    Re: Wall backing
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- We supply to a contractor that is remodeling a retirement village. All of it is steel fra ...

    Re: Veneer on softwood
    A message posted at WOODWEB's Veneer Forum (2/27) -- Thank u for the great tip He told me that i put the veneer on the jamb and he will stain them al ...

    Re: Edge Gluing Hard Maple
    A message posted at WOODWEB's Adhesives Forum (2/27) -- The first thing that caught my attention was "The wood is freshly cut using new planner ...

    Re: Reliable, simple touch-up spray gun for "in the house" touchup?
    A message posted at WOODWEB's Finishing Forum (2/27) -- Hello Gents, Adam and Shane, thank you very much for your información, those mini spray guns ...

    Re: Cabinetmaking
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- All of ours comes in stamped Weyerhauser. The 3/4" makes the best looking 1 piece md ...

    Re: 1" overlay euro hinge
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Thank you, Dennis. ...

    Re: Cabinet Pro software?
    A message posted at WOODWEB's CNC Forum (2/27) -- I have been using Cabinet Pro since 2004. When I started out, all I was looking for was a program t ...

    Re: Dealing with runs....
    A message posted at WOODWEB's Finishing Forum (2/27) -- Okay. I'm not sure of the ratio of my CA Tech pump. However, when my finish rep came to help ...

    Re: Restaurant Table Top
    A message posted at WOODWEB's Furniture Making Forum (2/27) -- You will definitely have a problem. Anytime I glue wood to a substrata, I always have ...

    Re: Questionable finishing practices
    A message posted at WOODWEB's Finishing Forum (2/27) -- Primer has two functions. Bonding and filling. If you are only using it for the bonding purpo ...

    Rail & stile size for large exterior doors
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- I'd like an informed opinion if the following size of the rails & stiles ...

    Re: Questionable finishing practices
    A message posted at WOODWEB's Finishing Forum (2/27) -- Primer also can serve as a stain blocker for wood with tannins that can bleed through the fin ...

    Re: Stave core vs. 10/4
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- Through wedged tenons were used in the US also. A lot of mass produced doors ...

    Re: insulated carriage doors
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- A huge factor in the design and success of these doors is their exposure to t ...

    Re: Cabinet Pro software?
    A message posted at WOODWEB's CNC Forum (2/27) -- I have been using Cabinet Pro for around 16 years. For my shop the flexibility of the program is wh ...

    Re: Univer power feeder oil change
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- There was a recent post here somewhere about the same issue. I just run straight Lucas in ...

    Re: Dust Collector Upgrade vs. Add On
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/27) -- Which part of your 15000 cfm is too small....the fan or the filte ...

    CNC cabinet fewer parts no flips
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Refining the design, changing backs to same 3/4 thickness as all other parts, machining v ...

    milesi poly 2k solvent based
    A message posted at WOODWEB's Finishing Forum (2/27) -- Any of you guys using milesi poly 2k white pigmented solvent based? My questions are: - Are y ...

    How do I achieve this look
    A message posted at WOODWEB's Finishing Forum (2/27) -- I just can't figure this one out. The finish is really thin and is peeling off. The owners lo ...

    Re: Ideal blades for slider & radial
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- One other thing if you bush a blade for other than it’s normal diameter in my ...

    Re: Questionable finishing practices
    A message posted at WOODWEB's Finishing Forum (2/27) -- For what it's worth, using latex paint as a cabinet finish is a questionable finishing practi ...

    Re: Univer power feeder oil change
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Makes sense! It's just a gearbox, right. Thank you. ...

    Re: Questionable finishing practices
    A message posted at WOODWEB's Finishing Forum (2/27) -- So this makes it acceptable to only apply one coat? ...

    Re: CNC cabinet fewer parts no flips
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Rest of the sequence, including the d'box. ...

    Re: Ideal blades for slider & radial
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- Forrest ...

    Re: Questionable finishing practices
    A message posted at WOODWEB's Finishing Forum (2/27) -- Yes, it does. ...

    Re: Business Outlook & Plan
    A message posted at WOODWEB's Business and Management Forum (2/27) -- Well, Tim, I see that you have many questions, some for me, some not. I'll star ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/27) -- "There is a thing called vetting." Yup, there sure is. Here's how &qu ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/27) -- Tim - You will wait forever as I'm sure you read all about the minor Flynn kerf ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/27) -- Econ 101, You sound like KellyAnne Conway. (I miss her. She could bob & wea ...

    Re: New Shop design
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/27) -- For the lighting get with your power company to see what programs ...

    Re: New Shop design
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/27) -- If you are building a building I would build for growth. If you d ...

    Re: Business Outlook & Plan
    A message posted at WOODWEB's Business and Management Forum (2/27) -- Huh. I refute you point by point, and all you want to talk about is evil Russki ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/27) -- Pat, I've been around, just somewhat rarely. Bob Dole (KS-R) used to be known a ...

    Re: First Big Wall-art: residual questions
    A message posted at WOODWEB's Finishing Forum (2/27) -- @rich c. I paid no attention at all to even how much was being removed, let alone considering ...

    Re: Business Outlook & Plan
    A message posted at WOODWEB's Business and Management Forum (2/27) -- Econ 101, You're doing the KellyAnne thing again. Obama is not the President. T ...

    Re: New Shop design
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/27) -- Thanks Bill. I have considered most of your points. As I start to ...

    correct primer under pigmented water based Lacquer?
    A message posted at WOODWEB's Finishing Forum (2/27) -- I used a gray pigmented water based Lacquer to prime under white-based, pigmented white water ...

    Re: Price matching competetor quotes
    A message posted at WOODWEB's Business and Management Forum (2/27) -- After ten years building cabinets, I decided to work for Lowes as an installer. ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/27) -- There is a thing called vetting. People who have hired and fired a lot of peopl ...

    Software for cabinet grade description
    A message posted at WOODWEB's Business and Management Forum (2/27) -- We would like to develop a grade level for residential cabinet construction. We ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/27) -- On the plus side the Trump people are considering Jon Huntsman for a role in th ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/27) -- "Flynn was pushed out of office for illegal contacts with the Russians.&qu ...

    Re: Induction Cooktop cutout
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I did a similar job a few years ago with basically the same set-up. It was inspected and ...

    Induction Cooktop cutout
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I am laying out a kitchen in which the homeowner is requesting a drop-in induction range ...

    Re: Festool Domino 500 or 700
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- "I hear people say they prefer a biscuit jointer, they are great for alignment, but ...

    Re: Quartz touchup coloring
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- I have seen some real miracles by smart stone men, they use "flowing&quo ...

    What our community is all about
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- A shout out to Jim Mcgrew. Jim went out of his way to come in this last satur ...

    Re: spindle repair
    A message posted at WOODWEB's CNC Forum (2/27) -- When rebuilding spindles. I would highly recommend sending the whole unit and not just the core. A ...

    Re: Cheap digitzer
    A message posted at WOODWEB's CNC Forum (2/27) -- I think we paid about 15k with training at the show last year, we just did a very large platform wi ...

    Holzher Edge Bander
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/27) -- I am looking to purchase a new edgebander and the machines I am looking ...

    Holzher Edge Bander
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I am looking to purchase a new edgebander and the machines I am looking at are the 1200 s ...

    Re: First Big Wall-art: residual questions
    A message posted at WOODWEB's Finishing Forum (2/27) -- David, You have made a major step in the right direction by getting Hoadley's book. We all ha ...

    Re: Price matching competetor quotes
    A message posted at WOODWEB's Business and Management Forum (2/27) -- I have told many that, lowes and big box cabinetry can look and work well, IF y ...

    Re: Quartz touchup coloring
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- Depending on how big the spots are, they can drill them out and repair to whe ...

    Adjusting panel thickness on SCM 208 edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I need help with adjusting panel thickness in my SCM K208 edge bander Some how panel thic ...

    Re: Software for cabinet grade description
    A message posted at WOODWEB's Business and Management Forum (2/27) -- Sounds like a simple text document will do the trick if you want to stay easy. ...

    Re: Quartz touchup coloring
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- I got ahold of the Cambria rep and he was extremely helpful and offered to ha ...

    Re: Spraying Existing Kitchen
    A message posted at WOODWEB's Finishing Forum (2/27) -- I tried the aquaprime about 6 weeks ago. Couldn't get it to spray out if anything I had. Try ...

    Weight and drying
    A message posted at WOODWEB's Sawing and Drying Forum (2/27) -- I have a 65 inch diameter pin oak that needs to come down due to gall infestation. He ...

    Re: drawer slides
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (2/27) -- Not sure what state you are in, but I just purchased 16" slides ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/27) -- And that is a reason to vote for Trump, he has had a lot of practice choosing p ...

    Re: Cheap digitzer
    A message posted at WOODWEB's CNC Forum (2/27) -- IIRC that is about 30k Ok so the break even on this item would be what 100 years? for me. if you di ...

    Re: Refinishing
    A message posted at WOODWEB's Finishing Forum (2/27) -- Probably - but you should do a test on the back of something to make sure. You're looking to ...

    Re: Business Outlook & Plan
    A message posted at WOODWEB's Business and Management Forum (2/27) -- So how can you hire a guy for NATIONAL SECURITY director and 24 days later have ...

    Re: Border Tax & Woodworking Equipment
    A message posted at WOODWEB's Business and Management Forum (2/27) -- You might add in Neil Gorsuch compared to either of dear leaders appointments. ...

    Re: Software for cabinet grade description
    A message posted at WOODWEB's Business and Management Forum (2/27) -- Is your crew nimble enough to work on three standards of quality? ...

    Re: Cheap digitzer
    A message posted at WOODWEB's CNC Forum (2/27) -- For you that makes sense. FWIW I have done similar handrail type jobs and found 3d drawings to be u ...

    Refinishing
    A message posted at WOODWEB's Finishing Forum (2/27) -- Can post catalysed solvent b ased conversion varnish be sprayed over a water based UV cure fi ...

    Re: spindle repair
    A message posted at WOODWEB's CNC Forum (2/27) -- Atlanta Spindle Services. Used them several times, good service, would use them again. ...

    Re: spindle repair
    A message posted at WOODWEB's CNC Forum (2/27) -- I'm with Brian, Atlanta Precision Spindles. I will send a spindle no where else. ...

    Re: Custom Radius Trim
    A message posted at WOODWEB's Solid Wood Machining Forum (2/27) -- https://www.curvedmouldings.com/about.html ...

    Re: Cheap digitzer
    A message posted at WOODWEB's CNC Forum (2/27) -- Well this wasn't cheap but it templates about anything. A- ...

    Re: rework
    A message posted at WOODWEB's Business and Management Forum (2/27) -- We make a recycle pullout that's probably the most robust on the planet. There ...

    SCM Basic 1 edgebander operation
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/27) -- Picked up a used Basic 1 recently and no nothing about it and the prior ...

    Re: Powermatic 2700 shaper spindle bearing replacement
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Yeah the Casadei is an industrial machine meant to get some work done. The Powermatic is ...

    Re: rework
    A message posted at WOODWEB's Business and Management Forum (2/27) -- My experience is that I get people to sign off on each step that they perform. ...

    Re: Powermatic 2700 shaper spindle bearing replacement
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Pre-load is designed to take all the end play out of an assembly. Production level machin ...

    Re: cnc Services pricing
    A message posted at WOODWEB's CNC Forum (2/27) -- Most mid level and up flat table machines can do that. You can get aggregates to do edge bore/routi ...

    Re: tooling for cabinet parts
    A message posted at WOODWEB's CNC Forum (2/27) -- Mark, we use 3/8 compression spirals from Onsrud with the Marathon coating. Use them on everything. ...

    Re: RE: Oliver Jointer Repair
    A message posted at WOODWEB's Solid Wood Machining Forum (2/27) -- Tommy, Eagle Machinery and Repair in Grand Rapids, MI bought all of the Oliver dra ...

    bidding job
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- I am bidding to build 50' curved bar, curved is slight, top is granite, but has cherry 5 ...

    Re: Best angle for grinding moulder knives
    A message posted at WOODWEB's Solid Wood Machining Forum (2/27) -- Dok I written a few brief but helpful articles on this subject I have attached bel ...

    Re: Textured Melamine Panels
    A message posted at WOODWEB's CNC Forum (2/27) -- It's been around for quite awhile. Runs fine, haven't had any problems holding cabinet size parts. ...

    Re: bidding job
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- 50' of ???/ Doesn't really matter what, I guess. You bid 50' using the same procedure you ...

    Re: Roll out shelves
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Drawers work better! If you still MUST do shelves, look in Hafele, they have lots of rail ...

    Re: MLC clawlock
    A message posted at WOODWEB's Finishing Forum (2/27) -- Dan. Are you required to add a catalyst to the Chemcraft water based product. TIA Brian ...

    Re: Carborundum Premier Red sandpaper
    A message posted at WOODWEB's Cabinetmaking Forum (2/27) -- Try Sia. I like them better, Richelieu selling them ...

    Re: rework
    A message posted at WOODWEB's Business and Management Forum (2/27) -- cabmaker: that was well written and right on point. Much success to you. ...

    Re: reversing switch
    A message posted at WOODWEB's Sawing and Drying Forum (2/27) -- thanks EC ...

    Re: Close the doors, move on?
    A message posted at WOODWEB's Business and Management Forum (2/27) -- Your training and experience, your shop capabilities, your network of resources ...

    Re: sprayers/what to buy
    A message posted at WOODWEB's Finishing Forum (2/27) -- You need to weigh out your options. If you are spraying finish all day it's a no brainer to g ...

    Re: Close the doors, move on?
    A message posted at WOODWEB's Business and Management Forum (2/27) -- Richard, more power to you, but I've never been able to understand how a one-ma ...

    Re: width of irregularly-shaped lumber for BF calculation
    A message posted at WOODWEB's Sawing and Drying Forum (2/27) -- I normally sell by the slab due to each has different characteristics that change the ...

    Buying weatherstripping...
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- I'm currently building a set of transom windows for interior use. However I w ...

    Re: "live edge veneer"??
    A message posted at WOODWEB's Sawing and Drying Forum (2/27) -- Veneer can be 2" thick...we just commonly assume the 1/16-1/4" thickness UN ...

    Re: Deleting a machining program-Weeke PTP
    A message posted at WOODWEB's CNC Forum (2/27) -- Jim, once you generate a Woodwop file it creates a program file. I believe it's extension is pr4. I ...

    Re: classic column design guidelines
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- One of the best is Chippendales Directory. You can get it free here :https:// ...

    Re: Close the doors, move on?
    A message posted at WOODWEB's Business and Management Forum (2/27) -- Tony, your story is the writing on the wall. As for the raising prices question ...

    Re: live edge weeping cherry tables
    A message posted at WOODWEB's Sawing and Drying Forum (2/27) -- ??"A sign of a non-woodworker" ???...look at my website, I must be a sorry ...

    Re: SCM owners
    A message posted at WOODWEB's CNC Forum (2/27) -- I use Team Viewer for personal stuff all the time, but there is a cost to the software if a company ...

    Re: live edge veneer
    A message posted at WOODWEB's Veneer Forum (2/27) -- Hello Jason, Live edge veneer is probably describing domestic veneer. When domestic veneer it is ...

    Re: Close the doors, move on?
    A message posted at WOODWEB's Business and Management Forum (2/27) -- An old guy once said to me," you never run out of money, you only run out ...

    Re: sprayers/what to buy
    A message posted at WOODWEB's Finishing Forum (2/27) -- Airless is meant for spraying walls in houses. A lot of material at high pressure, not suitab ...

    Re: Evolution for Buselatto
    A message posted at WOODWEB's CNC Forum (2/27) -- Update, thanks Bill for the suggestions. I did try again and one thing I forgot to mention before. ...

    Water based contact cement
    A message posted at WOODWEB's Adhesives Forum (2/27) -- We are currently spraying 3m 94 ca out of the canister type spray system. We mainly build ver ...

    Re: SCM owners
    A message posted at WOODWEB's CNC Forum (2/27) -- I use a different, higher end machine(one that competes with SCM large format) and on occasion have ...

    Water based finishes
    A message posted at WOODWEB's Finishing Forum (2/27) -- We specialize in high end conference tables that require thick and very durable finishes. We ...

    Re: Close the doors, move on?
    A message posted at WOODWEB's Business and Management Forum (2/27) -- "Should I quit while I'm still young, or stick it out and hope I don't hav ...

    Re: Satin Finish
    A message posted at WOODWEB's Finishing Forum (2/27) -- I would stop at 600 grit wet sanding, then maybe 500 or 1000 or the Abralon. I suggest you ge ...

    Re: Evolution for Buselatto
    A message posted at WOODWEB's CNC Forum (2/27) -- Hi Tom, A couple of ideas if they weren't already suggested: Have you re-installed from scratch? Un ...

    Re: Evolution for Buselatto
    A message posted at WOODWEB's CNC Forum (2/27) -- Try another uninstall, reinstall, delete C:\evol and this time reboot before the re-installation. A ...

    Re: Cabnetware Intelliparts
    A message posted at WOODWEB's CAD Forum (2/27) -- You can attach a Template from S2M to a construction file in your parameters setting but not a spec ...

    Re: What do you do with your bent lumber?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/27) -- We do a fair amount of raised panel doors, and only raise the front, so the backs ...

    Re: Water based contact cement
    A message posted at WOODWEB's Adhesives Forum (2/27) -- I've had good success with most water based contacts when bonding laminates or poly back vene ...

    Re: Cleaning Solvents and Waterlox
    A message posted at WOODWEB's Finishing Forum (2/27) -- According to Waterlox webesite, this may be the problem that you are having: Follow the link ...

    Re: SCM owners
    A message posted at WOODWEB's CNC Forum (2/27) -- Team viewer is free for one on one use, I use it Often, even between my own computers, a company pa ...

    Re: How Much Does Wood Move
    A message posted at WOODWEB's Furniture Making Forum (2/27) -- Thanks for sharing a information with us.. If wood has been shrinking and the RH is lo ...

    Corner oak tambour appliance garage
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (2/27) -- Looking for a source for a well made unfinished oak corner appliance ...

    Re: Using glue instead of bondo to fill cracks for paint grade
    A message posted at WOODWEB's Adhesives Forum (2/27) -- Activator and super glue or autobody glazing. Apply both sparingly as they both dry very quic ...

    Turbosand
    A message posted at WOODWEB's CNC Forum (2/27) -- I am considering a Turbosand sanding head to sand raised panel profiles with my CNC. My question is ...

    Re: Water based finishes
    A message posted at WOODWEB's Finishing Forum (2/27) -- I cannot imagine a waterborne finish that mimics any polyester coating....even a 2K poly. I w ...

    Re: SCM owners
    A message posted at WOODWEB's CNC Forum (2/27) -- i hope their service is good. i have heard of other companies that do this and the support is not g ...

    Re: What do you do with your bent lumber?
    A message posted at WOODWEB's Solid Wood Machining Forum (2/27) -- I feel your pain. I do the same thing and then in the spring I cut it up and use i ...

    sprayers/what to buy
    A message posted at WOODWEB's Finishing Forum (2/27) -- For doing fine finishes which is better. Airless sprayer or air assisted.Will be spraying cab ...

    Re: Buying weatherstripping...
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- These guys have a good product- http://www.conservationtechnology.com/buildin ...

    Re: Buying weatherstripping...
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- I second Steeliemark's plug- RCT has a very good line of seals and sweeps for ...

    Re: sprayers/what to buy
    A message posted at WOODWEB's Finishing Forum (2/27) -- tom a air assisted airless spray gun is the best gun for you spraying cabinets /or furniture ...

    Re: SCM owners
    A message posted at WOODWEB's CNC Forum (2/27) -- If they were to not Mask it as a fee, the price might not be so bad,, My CNC provider support is fr ...

    Re: width of irregularly-shaped lumber for BF calculation
    A message posted at WOODWEB's Sawing and Drying Forum (2/27) -- Thanks! That answers my question. ...

    Re: How much does wood move
    A message posted at WOODWEB's Architectural Woodworking Forum (2/27) -- Gene, that is very succinctly written. thanks. ...

    Re: SCM owners
    A message posted at WOODWEB's CNC Forum (2/27) -- Paid to SCM, so yes, it does appear they are charging for tech support. ...

    Re: 10 foot press
    A message posted at WOODWEB's Veneer Forum (2/27) -- Check with Navy Island Plywood 651-451-4454 ...

    Re: New church alter shrunk and imploded
    A message posted at WOODWEB's Furniture Making Forum (2/27) -- I don't think he's learned either unfortunately:>( Simply remaking it with thicker ...

    Re: Mottle Makore Veneer with Titebond Cold Press Glue
    A message posted at WOODWEB's Veneer Forum (2/27) -- The linear cracks are from wood movement in its environment and the finish not being able to exp ...

    VT Solar Kiln Course
    A message posted at WOODWEB's Sawing and Drying Forum (2/27) -- The Short Course, Drying Lumber with a Solar Kiln, will be held on Friday, May 30th, ...

    Re: Gluing endgrain heartpine over plywood
    A message posted at WOODWEB's WOODnetWORK Forum (2/27) -- Thanks for the response. I purchased the heartpine from a supplier. This wood was cut from ...

    I need a very basic sawmill that is relatively inexpensive
    A message posted at WOODWEB's Sawing and Drying Forum (2/27) -- I need to mill a bunch of timber for a house I am building. I have been using an Alas ...

    Re: Dust collector on off switches
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/27) -- I was thinking about wiring in multiple switches too. Our shop is ...

    Re: I need a very basic sawmill that is relatively inexpensive
    A message posted at WOODWEB's Sawing and Drying Forum (2/27) -- Do a "bing" or "google" search for bandsaw mills... you will find ...

    Re: I need a very basic sawmill that is relatively inexpensive
    A message posted at WOODWEB's Sawing and Drying Forum (2/27) -- I bought a Burg (burgbandsawmills.com) for the 38" cutting width but you need to ...

    Re: Gluing endgrain heartpine over plywood
    A message posted at WOODWEB's WOODnetWORK Forum (2/27) -- I wouldn't do any edge gluing, and make sure that your pine is dry enough for this. I would ...

    Re: I need a very basic sawmill that is relatively inexpensive
    A message posted at WOODWEB's Sawing and Drying Forum (2/27) -- I'll bet you could find a used LT 40, which would be ideal and then you could sell it ...

    Re: Dust collector on off switches
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/27) -- On second thought, the less expensive remote units are not rated ...

    Re: New church alter shrunk and imploded
    A message posted at WOODWEB's Furniture Making Forum (2/27) -- I don't understand why you would have used solid wood in the first place. It didn't ma ...

    Re: AutoLISP for cabinets anyone?
    A message posted at WOODWEB's CAD Forum (2/27) -- I'm thorry, but I couldn't rethitht think a thoftware named lithp was funny. Upward and onward fell ...

    Re: threaded rod table legs-Hardware
    A message posted at WOODWEB's Furniture Making Forum (2/27) -- I don't get it. A t nut? Do a google, there are hundreds of sources. ...

    Re: SmartLister
    A message posted at WOODWEB's CAD Forum (2/27) -- Just call me if you still have interest. My numbers in the demo. ...

    Re: Testing moisture resistance in particleboard
    A message posted at WOODWEB's WOODnetWORK Forum (2/27) -- Two things: You can ask your vendor to supply whatever documentation he has on 'moisture re ...

    Re: exterior redwood door
    A message posted at WOODWEB's Adhesives Forum (2/27) -- Thanks for the reply Kilgore, Yes, it is known that a glue joint will be stronger than the wo ...

    Re: Bonding Copper to Plywood
    A message posted at WOODWEB's Adhesives Forum (2/27) -- OK, interior cosmetic use rather that industrial or exterior application. Contact Cement is t ...

    Re: Testing moisture resistance in particleboard
    A message posted at WOODWEB's WOODnetWORK Forum (2/27) -- Moisture resistance is a relative - subjective - term that is not measured or quantified by ...

    Re: Testing moisture resistance in particleboard
    A message posted at WOODWEB's WOODnetWORK Forum (2/27) -- David, Yeah SGS are an inspection/testing company. Its defiantly difficult to guarantee the ...

    Re: exterior redwood door
    A message posted at WOODWEB's Adhesives Forum (2/27) -- Since you are a professional, you already know that any commercially available wood glue, pro ...

    Re: Testing moisture resistance in particleboard
    A message posted at WOODWEB's WOODnetWORK Forum (2/27) -- That's interesting. So if our customer asks for some type of guarantee or warranty that the ...

    Re: Bonding Copper to Plywood
    A message posted at WOODWEB's Adhesives Forum (2/27) -- Don't understand your question. I want to bond the copper to plywood in a way that they will ...

    Cable spools or drums
    A message posted at WOODWEB's WOODnetWORK Forum (2/27) -- I manage a sawmill that primarily processes wood for the pallet industry. In order to diver ...

    Re: Testing moisture resistance in particleboard
    A message posted at WOODWEB's WOODnetWORK Forum (2/27) -- Ok, I found EN 318 might have something to do with it. Its a European standard that tests c ...

    Re: Bonding Copper to Plywood
    A message posted at WOODWEB's Adhesives Forum (2/27) -- Why are you sticking copper to wood? (permanent or cosmetic bond?) You could choose from epox ...

    Re: glass door solutions?
    A message posted at WOODWEB's Furniture Making Forum (2/27) -- Try C.R. Laurence- ...

    Re: Bonding Copper to Plywood
    A message posted at WOODWEB's Adhesives Forum (2/27) -- Thanks Jim. ...

    Re: shaving mills
    A message posted at WOODWEB's Value Added Wood Processing Forum (2/27) -- I have a shavings (cedar/pine) mill for sale in Alabama...compete, ready to ...

    Re: Edgebander selection advice
    A message posted at WOODWEB's Business and Management Forum (1/27/24) -- Similar to you I have had 4 edgebanders in the last 4 years. First was a 200 ...

    Re: Edgebander selection advice
    A message posted at WOODWEB's Business and Management Forum (1/27/24) -- PO is polyolefin glue. We prefer to run unfilled glue because it works for 9 ...

    Re: Edgebander selection advice
    A message posted at WOODWEB's Business and Management Forum (1/27/24) -- What is unfilled PO glue ? Is that different from eva and PUR ? I like the i ...

    Re: Hanging brackets for wall cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (1/27/24) -- "French Cleat" Works great for us. Requires a 3/4" inset for the 1/4&qu ...

    Re: Wood interior doors in the making
    A message posted at WOODWEB's Furniture Making Forum (1/27/24) -- Your project seems like a fascinating undertaking! It seems like a good idea to use ...

    Re: Hanging brackets for wall cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (1/27/24) -- Suspension rail we call and a bracket that attaches to the side of the box. its made o ...

    Re: PART LABELS FOR NESTED PARTS
    A message posted at WOODWEB's CNC Forum (1/27/24) -- We use it. It works good, personally everything is to expensive now but it works seamlessly. Cv ...

    Re: Edgebander selection advice
    A message posted at WOODWEB's Business and Management Forum (1/27/24) -- I like your thinking , that's my current opinion as well . I will try the ne ...

    Re: Raffix connectors for closet
    A message posted at WOODWEB's Cabinetmaking Forum (1/27/23) -- Al, oh, how I wish I could have you attend one of my connector classes! There's nothin ...

    Widebelt Sander Dimensioning Roller
    A message posted at WOODWEB's Solid Wood Machining Forum (1/27/23) -- Which roller is supposed to handle stock dimensioning: the first rubber roller ...

    Re: Widebelt Sander Dimensioning Roller
    A message posted at WOODWEB's Solid Wood Machining Forum (1/27/23) -- I understand what you're saying and I think you're right. I'm not sure I want t ...

    Re: Widebelt Sander Dimensioning Roller
    A message posted at WOODWEB's Solid Wood Machining Forum (1/27/23) -- Hi we had the exact same problem with our sander and the reason that's happenin ...

    Re: Laced splice in a replacement sander conveyor belt
    A message posted at WOODWEB's Solid Wood Machining Forum (1/27/23) -- I just replaced mine the earlier this week. I got a new continuous belt made - ...

    Metal drawer side
    A message posted at WOODWEB's Cabinetmaking Forum (1/27/23) -- Does anyone recognize this metal drawer side? There's a Snaidero name plate, but I thi ...

    Re: Laced splice in a replacement sander conveyor belt
    A message posted at WOODWEB's Solid Wood Machining Forum (1/27/23) -- I haven't tried it, but I think replacing it with wool is easy to mess up and b ...

    Re: Buffing/smoothing a painted finish
    A message posted at WOODWEB's Finishing Forum (1/27/23) -- micromesh purple pad with a spray bottle filled with soapy water ...

    Re: Fire rated jambs
    A message posted at WOODWEB's Architectural Woodworking Forum (1/27/23) -- which type of jamps and fire rated you need? please explain! ...

    Re: Metal drawer side
    A message posted at WOODWEB's Cabinetmaking Forum (1/27/23) -- Blum, older style, might still be available, not sure ...

    Re: Buffing/smoothing a painted finish
    A message posted at WOODWEB's Finishing Forum (1/27/23) -- Polishing you should paint two coats. ...

    Re: Edge bander problems
    A message posted at WOODWEB's Business and Management Forum (1/27/22) -- This brings up a point I've stressed in the past. Shop equipment requires re ...

    Material price increases
    A message posted at WOODWEB's Business and Management Forum (1/27/22) -- I am a small one person trim and custom cabinetry business that does residen ...

    Re: Is this "spray booth setup" dangerous?
    A message posted at WOODWEB's Finishing Forum (1/27/22) -- I'm a safety/ environmental manager for a large mill work co. I also finished for many yea ...

    Challenging finish
    A message posted at WOODWEB's Finishing Forum (1/27/22) -- I have a finishing project that has figured cherry veneer field with 1/4" mahogany ve ...

    Re: Material price increases
    A message posted at WOODWEB's Business and Management Forum (1/27/22) -- Usually in a one man shop, the material is the smallest part of the bid. Are ...

    Re: Wide belt sander feed belt grip.
    A message posted at WOODWEB's Cabinetmaking Forum (1/27/22) -- This is not the same problem as yours, but the rubber finally fell apart on the drive ...

    Re: Material price increases
    A message posted at WOODWEB's Business and Management Forum (1/27/22) -- Your only option is to put a clause in your bids and contracts that pricing ...

    Re: tool changer options
    A message posted at WOODWEB's CNC Forum (1/27/22) -- Our machine has both. I prefer the carousel changer and load it with more frequently used tools. ...

    rover b7 no band sensor down error
    A message posted at WOODWEB's CNC Forum (1/27/22) -- hello i have the above error coming up when i go to machine something which i understand is eith ...

    Re: Table base design
    A message posted at WOODWEB's Furniture Making Forum (1/27/22) -- What is the diameter of the legs? I would turn the legs out of solid stock. Make a ...

    Re: rover b7 no band sensor down error
    A message posted at WOODWEB's CNC Forum (1/27/22) -- One of 3 things assuming the cylinder is in the right position: The sensor has moved and is not ...

    Closet Load up Boxes
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/27/22) -- I’ve done a couple videos on our load up boxes for our closet comp ...

    Re: MDF Shaker CNC doors warping
    A message posted at WOODWEB's Cabinetmaking Forum (1/27/22) -- HDF (Door Grade) melamine back, is the best for non deflection, moisture and tension m ...

    Re: MDF Shaker CNC doors warping
    A message posted at WOODWEB's Cabinetmaking Forum (1/27/22) -- Wondering if anyone else uses Cabinet Vision to machine Shaker MDF doors? We are wonde ...

    Re: Blind Corner Cabinet Advise
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/27/22) -- Seems like You Tube should have the answer ...

    Re: MDF Shaker CNC doors warping
    A message posted at WOODWEB's Cabinetmaking Forum (1/27/22) -- James do you guys sand and paint the melamine back? ...

    Re: Drawer box material
    A message posted at WOODWEB's Cabinetmaking Forum (1/27/22) -- Dido what Leo said ...

    Re: Challenging finish
    A message posted at WOODWEB's Finishing Forum (1/27/22) -- Any photos? ...

    Re: Cnc technology
    A message posted at WOODWEB's CNC Forum (1/27) -- If you have a CNC, the best way to "figure it out" would be to just start using it as a p ...

    To buy or not to buy...
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Looking for my first band saw on the cheap and I found a 14" Reliant on sale for $50 ...

    Re: Tracking jobs
    A message posted at WOODWEB's Business and Management Forum (1/27) -- We use TSheets. The payroll processing is faster, installers can clock in and o ...

    Wire vibration in conduit on motor startup safe?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/27) -- Title sums it up. I've encountered a few machines over the years ...

    Re: What Kind og bander for smal shop
    A message posted at WOODWEB's Adhesives Forum (1/27) -- Late to this one, and know your not in the US, but we are a small shop with an older Holzher ...

    Re: Wire vibration in conduit on motor startup safe?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/27) -- Im no electrician but consider myself pretty savvy but you often ...

    Re: Inset blind corner 94* soft close Salice
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Hi Al, I spoke with Rob about this last night. Here is what we have available for inset, ...

    Re: Inset blind corner 94* soft close Salice
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Al, I have not seen it used with the blind corner hinges before so an experiment was nece ...

    Re: Table Top and Skirt Shrinkage
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- Knowing that wood moves, I find it helpful to plan ahead. If the top to apron connect ...

    James Taylor Hydraulic Clamp Carrier
    A message posted at WOODWEB's Architectural Woodworking Forum (1/27) -- We own a James Taylor 80 section clamp carrier and this is commissioned in Sr ...

    Re: Tracking jobs
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Over the years I have had several employers in construction who tortured their ...

    Re: Cnc technology
    A message posted at WOODWEB's CNC Forum (1/27) -- In my opinion, you can search on Google according to your question, and there will be many websites ...

    Re: Parting out Rover 20 CNC - Does anyone need anything?
    A message posted at WOODWEB's CNC Forum (1/27) -- I would be interested in some locating pin assemblies, if they are the same as those on my 2001 Rov ...

    Re: Inset blind corner 94* soft close Salice
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Blum sells a 95° blind corner hinges, https://publications.blum.com/2016/catalogue/en/128 ...

    Re: Inset blind corner 94* soft close Salice
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Al, My recommendations above are all soft close. Thanks, Dennis ...

    Re: Inset blind corner 94* soft close Salice
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Dennis, Does the restricter clip work on any of these? ...

    Re: Inset blind corner 94* soft close Salice
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Much appreciated Dennis. Thanks ...

    Re: Blum tandom vs grass dynapro
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- I ran dynapros exclusively until we lost distribution which was a sad day. I've never bee ...

    Re: SS countertop software / Andi Stratos
    A message posted at WOODWEB's CNC Forum (1/27) -- Call Ross Goble at DES in North Carolina. My competition that uses auto cad, alpha cam does fine. I ...

    Re: SS countertop software / Andi Stratos
    A message posted at WOODWEB's CNC Forum (1/27) -- Thanks cabinetmaker, That helps, I used the widebelt to flatten the table saw ripped edges to a con ...

    Re: vacuum pump
    A message posted at WOODWEB's CNC Forum (1/27) -- There is a wave or ripple on the inside wall of the cylinder. We don't know if it's big enough to b ...

    Re: Blum tandom vs grass dynapro
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Hey Mark B, Thanks for those kind words. I enjoy reading the posts here on Wood-web and h ...

    stop for chop saw fence
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/27) -- We have a 2x4 turned on edge with a self adhesive tape on it for a fe ...

    Re: Blum tandom vs grass dynapro
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Ive used grass dynapro for the last 6 years. I love the lateral adjustment. It seems to b ...

    Re: SCM Maestro out of memory issue
    A message posted at WOODWEB's CNC Forum (1/27) -- I really dislike Maestro. It is very limited as to what you can do and not all that user friendly. ...

    Re: vacuum pump
    A message posted at WOODWEB's CNC Forum (1/27) -- Trust but verify. Very expensive to second guess or to get mis information. I have had them, you ne ...

    Measuring Wood Whiteness
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- Does anyone have experience measuring the whiteness of kiln dried lumber? Drying whit ...

    Re: stop for chop saw fence
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/27) -- This is what I have. The handles only require a half turn to lock up ...

    Re: stop for chop saw fence
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/27) -- This is what I have. The handles only require a half turn to lock up ...

    Greasing aggregate
    A message posted at WOODWEB's CNC Forum (1/27) -- Hello all hope your having a good day I start using this aggtegate does any one know if i shoould g ...

    Re: Copy lathe templates
    A message posted at WOODWEB's Architectural Woodworking Forum (1/27) -- I have seen 1/8" to 1/4" aluminum used for templates. Cuts easily o ...

    Re: SCM Maestro out of memory issue
    A message posted at WOODWEB's CNC Forum (1/27) -- Ryan, Not to change the subject, but I am wondering what machine you are using? ...

    Re: Any Info on Using an Altendorf Duplex Miter Gauge?
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Thanks for sharing the manual Ken. ...

    Re: Outsourcing Acrylic Doors & Panels
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Try Hardwoods inc. ...

    Newbie In Over My Head
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- Hi All - we live in the Atlanta area and had to cut down a few big red oaks in mid-No ...

    Re: The SCM saga continues
    A message posted at WOODWEB's CNC Forum (1/27) -- What exactly is the error when loading parameters ? Some of the controllers require a change to Eng ...

    Re: Door/Drawer bumpers
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- I switched a number of years ago from the clear plastic bumpers. I had trouble with them ...

    Re: 1-3/4" Lock Miters
    A message posted at WOODWEB's Architectural Woodworking Forum (1/27) -- A quick CAD drawing shows that the 60mm ht. will cut a bit more than 1.625&qu ...

    Re: Cabinet hinges
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- I too like to install doors prior to finishing to verify the fit. I've used Blum Inserta ...

    Re: Best quality door butt hinges?
    A message posted at WOODWEB's Architectural Woodworking Forum (1/27) -- Well, it turns out Baldwin is having some quality issues from a new plant. My ...

    Re: Shop Pricing Strategies
    A message posted at WOODWEB's Business and Management Forum (1/27) -- I'm not a cabinet builder but will throw in my two cents as a consumer. Your pr ...

    Re: 1-3/4" Lock Miters
    A message posted at WOODWEB's Architectural Woodworking Forum (1/27) -- I am planning to use Resorcinol Glue since it is still the best on earth and ...

    Re: Chemlife24
    A message posted at WOODWEB's Finishing Forum (1/27) -- Yes I have used both clawlock and the level primers under the Chemlife 24 and did not see any ...

    Re: Cabinet hinges
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Thanks for all the input. I find that for both hinges and drawer slides, a lot of custome ...

    Re: 1-3/4" Lock Miters
    A message posted at WOODWEB's Architectural Woodworking Forum (1/27) -- I've done this very thing in teak, by tilting a glue-joint cutter (Amana 6126 ...

    Re: 1-3/4" Lock Miters
    A message posted at WOODWEB's Architectural Woodworking Forum (1/27) -- I have not lock mitered such thick stock, but I have made corners like this a ...

    Re: Blum minipress
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- It does not appear to be there, the part snaps on the depth adjusting shaft directly behi ...

    Re: Painting Flex Trim Mouldings
    A message posted at WOODWEB's Finishing Forum (1/27) -- this is from their website looks like no lacquer or primer https://flexiblemouldingconcepts.c ...

    alphacam help
    A message posted at WOODWEB's CNC Forum (1/27) -- i need help with programming for cnc mdf doors using alphacam im in mississauaga i have alot of pre ...

    Re: Door/Drawer bumpers
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- 3M ones are great, but expensive. We have switched to ones from Marathon Hardware and the ...

    Re: Chemlife24
    A message posted at WOODWEB's Finishing Forum (1/27) -- Thanks Gerry. So you use clawlock under chemlife, no issues? I really like clawlock. Not an i ...

    Re: Rover J 1530
    A message posted at WOODWEB's CNC Forum (1/27) -- Please post a picture Pull all the estops and reset the safety cable if you have one. If you have a ...

    Re: Alphacam+SCM+Homag
    A message posted at WOODWEB's CNC Forum (1/27) -- if your in the toronto area i can hire you fulltime to work on my alphacam and hein tables we make ...

    Re: Finding people?
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Reading the Chris Rock quote cracked me up. We are in a rural area where access ...

    Re: Finding people?
    A message posted at WOODWEB's Business and Management Forum (1/27) -- "These people like success" Funny you should mention that. I was chat ...

    Panel processing for other shops
    A message posted at WOODWEB's CNC Forum (1/27) -- Im sure this has to have been covered but have spent a bunch of time with every search string I cou ...

    Re: burning wood scraps
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- I agree that with very dry wood, the speed of burning and the heat that results is of ...

    resawing moulder blanks
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- Hi all, We mainly deal with reclaimed wood, and we have a Baker ABXX horizontal resaw ...

    Re: Finding people?
    A message posted at WOODWEB's Business and Management Forum (1/27) -- I have made a lot of really great hires out of Craigslist. It's relatively easy ...

    Re: Seriously purchasing two stager compressor for spraying
    A message posted at WOODWEB's Finishing Forum (1/27) -- To all members in this thread please reply back to this. Yesterday my 80 gallon Home Depot, H ...

    Re: Software question
    A message posted at WOODWEB's CAD Forum (1/27) -- JM what about optimize drill head? While I doubt the machine he is looking at comes with a drill he ...

    Re: Edgeing doors and fronts
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- i run 8 different door edge profiles only two of them cut only on the top corner of the p ...

    Re: Finding people?
    A message posted at WOODWEB's Business and Management Forum (1/27) -- These are perhaps potential resources: Madison College Cabinetmaking Millwork P ...

    Re: RE: Questions regarding the color of Walnut, and when to cut it
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- Walnut color when first sawing can be quite greenish. It will quickly darken as it ox ...

    Re: 6.6 kw electrospindle
    A message posted at WOODWEB's CNC Forum (1/27) -- Your question is somewhat vague. A 1.2KW spindle could handle the hardest of hardwoods if you have ...

    Searching for a router bit
    A message posted at WOODWEB's CNC Forum (1/27) -- I need to back cut a MDF flat panel for shaker type doors. They will go in a wood frame. I have don ...

    Re: Finding people?
    A message posted at WOODWEB's Business and Management Forum (1/27) -- I've had the most success hiring out of our local high school wood shop. Of cou ...

    Re: Software question
    A message posted at WOODWEB's CAD Forum (1/27) -- JM what about optimize drill head? what about labeling? what about optimize the cutting order to av ...

    Narrow Closet
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Looking for input on layout for a long, narrow closet (3' x 11' with a small door at one ...

    Re: Edgeing doors and fronts
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- I offer 32 different edge profiles as well as will match any sample my customers are need ...

    Dovetail tool for CNC machines?
    A message posted at WOODWEB's CNC Forum (1/27) -- I am considering purchasing a dovetail drawer tool for our shops CNC. I am concerned that the produ ...

    Re: AlphaCam V7.5
    A message posted at WOODWEB's CAD Forum (1/27) -- Thanks guys for the help. It turned out that the engineer sourced an exact pc on eBAY from the USA ...

    Re: 6.6 kw electrospindle
    A message posted at WOODWEB's CNC Forum (1/27) -- Be more specific. Hardwood. 8/4 hickory is hardwood. That’s borderline to run hardwood all day for ...

    Re: Dovetail tool for CNC machines?
    A message posted at WOODWEB's CNC Forum (1/27) -- I personally ran the dovetail bit from vortex ,,with cabinet vision ,,and it is spot on,,,,, It’s a ...

    Re: 6.6 kw electrospindle
    A message posted at WOODWEB's CNC Forum (1/27) -- I am looking for a cnc router and i checked scm pratix s 6.6 kw on the onther hand other cnc router ...

    Re: Finding people?
    A message posted at WOODWEB's Business and Management Forum (1/27) -- In my opinion, CL is a waste of time. I suggest Indeed. When I am looking for s ...

    6.6 kw electrospindle
    A message posted at WOODWEB's CNC Forum (1/27) -- hi all can anyone clarify to me if a 6.6 kw electrospindle is good enough to work with hardwood , s ...

    Re: S4S machine
    A message posted at WOODWEB's Solid Wood Machining Forum (1/27) -- I researched a SCM Sintex further and the side heads are not adjustable for height ...

    Re: Dovetail tool for CNC machines?
    A message posted at WOODWEB's CNC Forum (1/27) -- Here is the vortex video. You can judge yourself. https://www.youtube.com/watch?v lEi5xU3-mbk ...

    Re: Sealing green wood (entire board)
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- Hi Gene, I didn't think about the rot factor. Thank you for the info. ...

    Re: compressed air lines
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Steel black pipe here for 33 years still going strong. ...

    Re: Titebond 2 is NOT water resistant as claimed
    A message posted at WOODWEB's Adhesives Forum (1/27) -- TB2 is indeed water resistant, meaning that water does not dissolve or affect the glue for oc ...

    Re: Wilsonart 1731 adhesive delamination problems
    A message posted at WOODWEB's Adhesives Forum (1/27) -- Just like everyone else, we're going through the same thing. Seems like every week, I get a c ...

    Re: waterproof mdf
    A message posted at WOODWEB's Value Added Wood Processing Forum (1/27) -- Where are you located? I'm in north jersey and I get it delivered from Robe ...

    Re: CRM choices
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Nutshell Easy set up, fairly intuitive, fantastic support does way more than yo ...

    Re: TEAK MATS FOR SHOWER FLOORS
    A message posted at WOODWEB's Furniture Making Forum (1/27) -- When I first did these 20 yrs ago, I had no precedent to follow. I went with thin and ...

    Pre-dryer???
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- Boss has got this idea about re-engineering our t-sheds we use for air drying. Instal ...

    Re: water borne finishes
    A message posted at WOODWEB's Finishing Forum (1/27) -- Ok. This is a pet peeve for me. If I hear one more "professional finisher" complain ...

    Re: door sanding
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- You need to get really good at proper setup and glue up. Many shops just slap them togeth ...

    Re: Attaching Rail/Apron to Table Top
    A message posted at WOODWEB's Furniture Making Forum (1/27) -- Pocket holes will work fine to attach your apron to the top. However, as the others ha ...

    Re: Compressor tank size vs cfm
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Our Surge electric sanders with the "on-board" power supply weighs close to the ...

    Re: Prefinish Panel
    A message posted at WOODWEB's Finishing Forum (1/27) -- Just wipe some stain or sealer on the panel edges. The movement is minor and as long as there ...

    Re: Price matching competetor quotes
    A message posted at WOODWEB's Business and Management Forum (1/27) -- How are you going to prove better product for better value? It's too objective ...

    Re: door sanding
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- uhhh?jack plane, sharp with eye for grain. i do use an adjustable orbit rigid 6in, and a ...

    Re: water borne finishes
    A message posted at WOODWEB's Finishing Forum (1/27) -- Thanks Bart for that highly informative/veiled insult response. I've only been using WB (excl ...

    Re: Wonky cuts on diagonal???
    A message posted at WOODWEB's CNC Forum (1/27) -- Regarding the ball screw assembly on the Y-axis there might be some back lash adjustment built into ...

    Re: door sanding
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Sorry, I should clarify, its not the stub tenon to groove joint I am concerned about, I g ...

    Byrd head on scmi s520 planer
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Would like to change from straight knife head to spiral on this planer. Anybody done this ...

    Re: Problems with Wilsonart 1730 contact adhesive
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (1/27) -- Yes, we are having similar issues in the same time frame that you mentio ...

    Re: door sanding
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- I drum sand before I build doors, then use my 6" Bosch ROS65VC with 150 grit after g ...

    Re: Price matching competetor quotes
    A message posted at WOODWEB's Business and Management Forum (1/27) -- That is the road to ruin. There's always someone who will build cabinets for le ...

    Re: Price matching competetor quotes
    A message posted at WOODWEB's Business and Management Forum (1/27) -- I was thinking of advertising the following, we guarantee we will either price ...

    Price matching competetor quotes
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Im trying to decide if price matching competetor quotes might or might not be a ...

    Re: Dyeing expoxy
    A message posted at WOODWEB's Architectural Woodworking Forum (1/27) -- I've used black toner cartridge powder mixed into clear epoxy as a filler on ...

    Re: Wonky cuts on diagonal???
    A message posted at WOODWEB's CNC Forum (1/27) -- When you engage the pinions into the rack, with the drives disengaged, if you wiggle the gantry bac ...

    Re: Price matching competetor quotes
    A message posted at WOODWEB's Business and Management Forum (1/27) -- You may want to consider other competitive advantages you have and consider tha ...

    Re: Price matching competetor quotes
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Those are some totally valid points. Thanks for your input! Back to the drawing ...

    Re: Wonky cuts on diagonal???
    A message posted at WOODWEB's CNC Forum (1/27) -- Maurice, Pinion looks good 2mm flat on type with even wear, no slop on ball in Y axis either, belt ...

    Re: door sanding
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Also get a good 6" sander. Bosch, Makita, or Festool if you've got the cash. ...

    Re: Joining wet planks
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- I suspect the original question is about jointing wood and not joining wood. ...

    Re: Brush sander
    A message posted at WOODWEB's Solid Wood Machining Forum (1/27) -- There’s a reason why they switch manufacturers. The old saying can be true, someti ...

    Re: Strategy for growth
    A message posted at WOODWEB's Business and Management Forum (1/27) -- On the subject of the shop foreman. I have a shop foreman by name. That being s ...

    Re: Pewter finish
    A message posted at WOODWEB's Finishing Forum (1/27) -- Sounds like a challenging project and the time is running out. I would opt for powders as you ...

    Re: New CNC versus lightly used
    A message posted at WOODWEB's CNC Forum (1/27) -- If it is apples to apples and you are confident on the condition of the used machine there I say go ...

    Re: IKEA coming to town (Small cabinet Company)
    A message posted at WOODWEB's Business and Management Forum (1/27) -- What's your target market? If it's not low end DIY people you should be fine. T ...

    Re: Strategy for growth
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Nick - I would highly recommend reading Paul Down's book and reading ASAP. It's ...

    Cabinet Vision for Shop Drawings
    A message posted at WOODWEB's CNC Forum (1/27) -- I work at a small shop doing really high-end cabinetry and woodwork. We are in the middle of making ...

    Re: IKEA coming to town (Small cabinet Company)
    A message posted at WOODWEB's Business and Management Forum (1/27) -- I agree, I don't think we will offer services for ikea, in regards to installin ...

    Re: Strategy for growth
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Gauges? Gauges could be the mission or the reason for being in business. I'm in ...

    Re: Brush sander
    A message posted at WOODWEB's Solid Wood Machining Forum (1/27) -- Please always want to try to find a magical solution and they go with machines lik ...

    Re: Strategy for growth
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Nick, There is no magic blueprint in terms of what person to add when. The main ...

    Re: Cabinet Vision for Shop Drawings
    A message posted at WOODWEB's CNC Forum (1/27) -- Nice work Leland Patrick Either way you slice it, you have got to get down on paper clear and conci ...

    one dust collector or two
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- we're in need of an upgrade to our dust collector. right now, we have a 5hp cyclone and h ...

    Re: Shelix cutterhead on Makita 2040
    A message posted at WOODWEB's Solid Wood Machining Forum (1/27) -- I would have a hard time putting that kind of money into that machine.I used to ha ...

    Re: Built-in Field Face Frame install or prefab?
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Check out the Lamello P system connectors. I've used these for flat finishing cabinet com ...

    New CNC versus lightly used
    A message posted at WOODWEB's CNC Forum (1/27) -- We are almost ready to purchase a CNC. We had been leaning toward a new Thermwood CS43 5x10, but I ...

    Re: how much for a sqft
    A message posted at WOODWEB's Finishing Forum (1/27) -- Unless your a production shop producing stock cabinetry, using a sqft number to quote is not ...

    Re: Getting a C6 (CA) license or not.
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Thanks, Alan and Pat for the response. Apologies for not getting back sooner. I appreciat ...

    Re: Being bad mouthed by competitors
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Don't spend time on what you can't control. Anyone that has been in business fo ...

    Re: Spray Booth Decisions - New Shop
    A message posted at WOODWEB's Finishing Forum (1/27) -- I am in about the same exact situation. Would like to go with the curtain booth to get multi ...

    Business Mentor
    A message posted at WOODWEB's Business and Management Forum (1/27) -- I would like to find a mentor. My wish in life has been to try and build a busi ...

    Re: tack cloth
    A message posted at WOODWEB's Finishing Forum (1/27) -- The reason you might have heard not to use a tackcloth is if you are using a waterbased finis ...

    Custom Cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Need to have a custom cabinet built but it's quite unusual in size and need lock out slid ...

    Re: Cabinet Vision for Shop Drawings
    A message posted at WOODWEB's CNC Forum (1/27) -- Hello Patrick, I do all of my shop drawings and machining with cabinet vision. I can help with trai ...

    Re: Strategy for growth
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Use Lean, read the E-Myth, make your policies well known. You probably don't re ...

    Re: Fish eyes in Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (1/27) -- Did you ask the client if they used Pledge on the surface. Because if they did, sanding down ...

    Re: Looking for high temp thermostat
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- Make sure you need a thermostat separate from the one in the Nyle system. Usually you ...

    Re: Strategy for growth
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Nick, you are onto a good idea. Creating an organizational chart then pulling p ...

    Re: one dust collector or two
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- We run a few different size collectors, the little 1hp ones work great on stuff like a po ...

    Re: Byrd tool
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Actually i just was able to get in contact with them. They had a bad storm and power & ...

    Re: Pewter finish
    A message posted at WOODWEB's Finishing Forum (1/27) -- Sorry, no experience with iridescent powders. I've only used the "wax" patinas. I l ...

    Re: New CNC versus lightly used
    A message posted at WOODWEB's CNC Forum (1/27) -- can you see the used one in operation. Is there any software that will come with it. for $30000 you ...

    Re: Fish eyes in Conversion Varnish
    A message posted at WOODWEB's Finishing Forum (1/27) -- Thanks for the response. I did use fish eye additive to no avail. So I'm back to bare wood an ...

    Re: Photo design question
    A message posted at WOODWEB's CAD Forum (1/27) -- I use Photoshop but pixlr is my go to when I'm out of the office. It will handle all of the basics. ...

    Re: one dust collector or two
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- I have three collectors and like it. I run a small shop, but the I like it because there ...

    Re: Software
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Mozaik? Not sure if it will address your specific needs, but they have been awesome for o ...

    Lean Installations
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/27) -- Have any of you guys applied Lean to installations? If so please shar ...

    Re: tack cloth
    A message posted at WOODWEB's Finishing Forum (1/27) -- I use tack cloths on everything, post-cats, CV, 2K's, pigmented, clears, and have never had a ...

    Re: Strategy for growth
    A message posted at WOODWEB's Business and Management Forum (1/27) -- BTW flying an airplane is a lot easier with some gauges. What are your gauges? ...

    Re: one dust collector or two
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- We run 6 collectors ranging from 25hp to 5 hp, saves electricity ...

    Re: Where can I buy Trestle Table Leg components.
    A message posted at WOODWEB's Furniture Making Forum (1/27) -- www.hansonwoodturning.com ...

    Re: Byrd tool
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- Byrd is still around and doing a great job ...

    Re: metal tambour
    A message posted at WOODWEB's Cabinetmaking Forum (1/27) -- We've had good luck with Tape ease. ...

    Re: How man hours are related to Production
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Nick, I don't want to sound simplistic, but it is easy to get wrapped up in all ...

    finishing hemlock ceiling with fir glue-lams
    A message posted at WOODWEB's Finishing Forum (1/27) -- Im refinishing a ceiling in a 6000 sq ft house where the owner of my company lives. Extensive ...

    Re: custom shaper idea
    A message posted at WOODWEB's Solid Wood Machining Forum (1/27) -- Thanks for the heads up about those particular machines from Unique Machinery. I h ...

    Advance Kiln Drying Workshop
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- Penn State Extension in partnership with the Keystone Kiln Drying Association will be ...

    Re: Cabinet Door Profile
    A message posted at WOODWEB's Architectural Woodworking Forum (1/27) -- While I agree that putting this bead on/around a solid panel is not a good id ...

    Re: Spraying waterborne in the winter
    A message posted at WOODWEB's Finishing Forum (1/27) -- I don't even know what checking is. At 60-65 you've got nothing to worry about w/WB. I'm in S ...

    Crosscut slab section of raw wood
    A message posted at WOODWEB's Architectural Woodworking Forum (1/27) -- 1st - I am not a woodworker so am a complete novice when it comes to if this ...

    317 Masterwood X axis message
    A message posted at WOODWEB's CNC Forum (1/27) -- Good morning all, I have just put a 1999 Masterwood 317 with version 2 Masterworks online. I have h ...

    Re: closing shop and working for competition
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Joe: Hate to break it to you, but you never had a business! What you had was a ...

    Re: closing shop and working for competition
    A message posted at WOODWEB's Business and Management Forum (1/27) -- Hi John, yes I know all too well and I couldn't agree more. I too read the E-my ...

    Re: Cheap Airless Rig Finish Quality
    A message posted at WOODWEB's Finishing Forum (1/27) -- Just had to add this regarding Cheap Pumps. Last year in a grocery store parking lot a guy no ...

    Tabu veneer
    A message posted at WOODWEB's Veneer Forum (1/27) -- Hello Guys Bidding a job now with Tabu veneer, never use this product before, So i call the dist ...

    Re: Collet nuts
    A message posted at WOODWEB's CNC Forum (1/27) -- I have done what you are suggesting without any problems, but only in a pinch. I usually have a LH ...

    Re: Biesse/Microvellum code error
    A message posted at WOODWEB's CNC Forum (1/27) -- We had kind of the same problem when checking the post with the machine during integration. We ran ...

    Spraying waterborne in the winter
    A message posted at WOODWEB's Finishing Forum (1/27) -- Other than flow out issues and dry times, are there any concerns about spraying waterborne in ...

    Re: custom shaper idea
    A message posted at WOODWEB's Solid Wood Machining Forum (1/27) -- "...applying linear motion to the spindle assembly" Unique Machine makes ...

    Biesse/Microvellum code error
    A message posted at WOODWEB's CNC Forum (1/27) -- Hello everyone, We have a Biesse/Microvellum setup and there has been a problem that has surfaced r ...

    Re: Biesse/Microvellum code error
    A message posted at WOODWEB's CNC Forum (1/27) -- Look @ the post right as you get to G40 turning off correction and see what the last lines of code ...

    Re: Spraying waterborne in the winter
    A message posted at WOODWEB's Finishing Forum (1/27) -- Keeping the finish in a warm box(old refrigerator with a small ceramic heater) along with you ...

    Re: Spraying waterborne in the winter
    A message posted at WOODWEB's Finishing Forum (1/27) -- when i turn off my fan in the winter i run a propane torpedo heater for about ten minutes to ...

    Re: Poplar Sheet Goods
    A message posted at WOODWEB's Architectural Woodworking Forum (1/27) -- Here in CT, Home Depot sells 4X8 VC sheets for $40 each with poplar faces. tr ...

    Re: Cheap Airless Rig Finish Quality
    A message posted at WOODWEB's Finishing Forum (1/27) -- Does that ED655 have wink like some airless pumps? It does look interesting, I have a Binks A ...

    Re: Biesse/Microvellum code error
    A message posted at WOODWEB's CNC Forum (1/27) -- I have the updates. I have copied the machining lines over and over but the error happens on parts ...

    Re: Tabu veneer
    A message posted at WOODWEB's Veneer Forum (1/27) -- Hello John Thanks for the reply, how did you handle with the fact that they don't have edgebandi ...

    Re: Crosscut slab section of raw wood
    A message posted at WOODWEB's Architectural Woodworking Forum (1/27) -- This is a common question here - search the knowledge base on how to preserve ...

    Re: Tabu veneer
    A message posted at WOODWEB's Veneer Forum (1/27) -- I've worked with Tabu veneer several times over the years without issue, at least not with the m ...

    Re: Biesse/Microvellum code error
    A message posted at WOODWEB's CNC Forum (1/27) -- Ill find an old part and compare. I dont square the nest, never had to. Havent stopped it yet. ...

    Re: Biesse/Microvellum code error
    A message posted at WOODWEB's CNC Forum (1/27) -- Is this a nested part because it looks like a lead in or out from an adjacent part? ...

    Re: Collet nuts
    A message posted at WOODWEB's CNC Forum (1/27) -- We use bearing collet nuts on LH tools every day. Never had a problem. ...

    Re: wood movement in 55" dia table top
    A message posted at WOODWEB's Furniture Making Forum (1/27) -- If you think about the solid wood moving in width from any point, then you will see th ...

    Re: black spotting when flattening veneer
    A message posted at WOODWEB's Veneer Forum (1/27) -- This was tried with cherry, various cuts. It spotted with the softening formula and plain water ...

    Cornice Shields
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/27) -- Have a decent size cornice Job that the client requested has these sh ...

    Re: Start to complete
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- Thanks JS, I like that top...is it maple?? on a walnut base??? did you do the base al ...

    Re: black spotting when flattening veneer
    A message posted at WOODWEB's Veneer Forum (1/27) -- As mentioned, the mold may have been in the glue. I would suggest all fresh ingredients and dist ...

    Re: Start to complete
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- Nice rockers Tt! Very creative use of those crotch slab pieces, were those commission ...

    Re: Drying Pine
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- Gene, that does't seem to work. In NW Florida. I keep Fans on the lumber 24/7.Any oth ...

    Re: Drying Pine
    A message posted at WOODWEB's Sawing and Drying Forum (1/27) -- Do not run the fans when the humidity is over 90% RH. ...

    Re: Aluminum Straightedge
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/27) -- +1 on a piece of jointed stock. I edged a piece of 1" plywood wi ...

    Re: Which program to use for designing cabinets
    A message posted at WOODWEB's CAD Forum (12/26/23) -- There are several programs that you can use for designing cabinets, and the choice often depend ...

    Cutting a Lute/Oud neck on a table saw
    A message posted at WOODWEB's Architectural Woodworking Forum (12/26/23) -- Folks, I'm trying to make my first Lute and Oud, as an experiment in inst ...

    Re: Best Software for Automating Submittals
    A message posted at WOODWEB's CAD Forum (12/26/23) -- Cabinet vision has a pretty nice submittal package, we’ve been doing all of our commercial work ...

    Re: Buying a millwork business in this economic climate
    A message posted at WOODWEB's Business and Management Forum (12/26/22) -- “ Seems like a bizarre idea for someone with no millwork experience to inve ...

    Still trying to figure out a good spoilboard configuration for my machine
    A message posted at WOODWEB's CNC Forum (12/26/22) -- Hi, I have a 8 by 4 Chinese nesting machine with a pvc table with t slots, 6 vacuum inlets and ...

    Re: My first solo project : a wooden bar ! (ash olive tree)
    A message posted at WOODWEB's Furniture Making Forum (12/26/22) -- @Thomas Gardiner: Thank you very much for you advice Sir !!! i didn't know about t ...

    Re: Still trying to figure out a good spoilboard configuration for my machi
    A message posted at WOODWEB's CNC Forum (12/26/22) -- Forgot to mention that right now I am using the spoilboard with just the vacuum suction which w ...

    Re: My first solo project : a wooden bar ! (ash olive tree)
    A message posted at WOODWEB's Furniture Making Forum (12/26/22) -- There are plenty of threads on this forum you could read to explain how wood expan ...

    Re: Loose p-lam
    A message posted at WOODWEB's Adhesives Forum (12/26/22) -- Im thinking the WB is your problem. Loose spots (rare for us) if they happen are dealt wi ...

    Re: Still trying to figure out a good spoilboard configuration for my machi
    A message posted at WOODWEB's CNC Forum (12/26/22) -- if you have a machined grid for gaskets, you shouldn't need any fasteners. When initially placi ...

    Re: Any good book for intermediate/advanced cnc machining in wood
    A message posted at WOODWEB's CNC Forum (12/26/22) -- Found this nice little manual online https://www.eoasaw.com/wp-content/uploads/CNC-MANUAL-PDF-N ...

    Re: Buying a millwork business in this economic climate
    A message posted at WOODWEB's Business and Management Forum (12/26/22) -- Karl— If you’re sharing the risk, you’re sharing the profits too, right? ...

    Re: Teak veneer.
    A message posted at WOODWEB's Cabinetmaking Forum (12/26/21) -- Epoxy resin medium to slow hardner with a vacuum bag, I have wrinkled tiger strip wal ...

    Re: Laser measurer
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/26/21) -- Oh lord. We're going down the rabbit hole of finish trim installa ...

    Re: Teak veneer.
    A message posted at WOODWEB's Cabinetmaking Forum (12/26/21) -- Unibond looks good but I don't have clamping capabilities. I wonder if epoxy resin wi ...

    Re: Clear over pigmented
    A message posted at WOODWEB's Finishing Forum (12/26/21) -- We use MLC Krystal over dark tinted Resisrant . They say it’s not needed but we definitel ...

    Re: Laser measurer
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/26/21) -- Markb… If you don’t have anything nice to say, practice what your ...

    Re: Teak veneer.
    A message posted at WOODWEB's Cabinetmaking Forum (12/26/21) -- Can't use a vacuum bag either. ...

    New Foreman in Outdated Shop
    A message posted at WOODWEB's Business and Management Forum (12/26) -- I have recently become the foreman of a cabinet and millwork shop that is very ...

    Re: Alphacam Vba for Geometry Z-level
    A message posted at WOODWEB's CAD Forum (12/26) -- I have never coded for Alphacam. Generally speaking, when I want to bottom z of something, certain ...

    Re: 1/4'' shelf pin hole drill with stop collar
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- The festool track with system holes and the router setup with spring loaded plate is a g ...

    Re: Sawstop Jobsite saw
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- Dustin I'm calling foul on their stopping Bosch from trying to sell something similiar I ...

    Re: heating and cooling for furniture shop
    A message posted at WOODWEB's Business and Management Forum (12/26) -- I also am taking a gander at placing in a halogen radiator so would be keen on ...

    Re: New Foreman in Outdated Shop
    A message posted at WOODWEB's Business and Management Forum (12/26) -- Seems to me that the owner has to be sold on this idea otherwise it is a moot ...

    Deck Finishing
    A message posted at WOODWEB's Finishing Forum (12/26) -- I’m helping out a friend who is building a deck. I told him is best to finish all sides of t ...

    Re: Alphacam Vba for Geometry Z-level
    A message posted at WOODWEB's CAD Forum (12/26) -- Are points not defined by x y and z? ...

    Re: Wood lathe question
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- Not sure of your lathe drive but change of either drive pulley or driven pulley would be ...

    Re: What to do with painted HeartPine Flooring to Sell
    A message posted at WOODWEB's Sawing and Drying Forum (12/26) -- Appreciate that there is no way using appearances even with a microscope, to identif ...

    Re: Removing paste wax (over tung oil)
    A message posted at WOODWEB's Finishing Forum (12/26) -- as far as I know you have to strip to get rid of the wax. Swirl marks in wax are easily remo ...

    Re: Wood lathe question
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- Thanks for all the information, I guess I probably don't need to go slower by the sounds ...

    Re: biesemeyer fence on shaper
    A message posted at WOODWEB's Architectural Woodworking Forum (12/26) -- I doubt it would be rigid enough. I really like fence I put together. Cheap ...

    biesemeyer fence on shaper
    A message posted at WOODWEB's Architectural Woodworking Forum (12/26) -- We do almost all outboard fence setups on our shapers wondering if anyone ha ...

    Re: Microvellum Library
    A message posted at WOODWEB's CAD Forum (12/26) -- Sorry, we are running v67 - they are very similar but different enough I could hurt you more than ...

    Plywood veneer quality... am I the only one that can't get decent stuff?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/26) -- The past few years, but especially 2018, I've noticed that getting d ...

    Re: shop size
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- I agree with making a drawing and some scale machinery & scale materials. It is easi ...

    Whats the minimum toe kick height you've used?
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- I have a customer with a very small galley style kitchen that is wanting to cram every i ...

    Re: Plywood veneer quality... am I the only one that can't get decent stuff
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/26) -- I hear ya. I really don't know how they can get is so thin and still ...

    Re: shop size
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- I concur with John B in making a scale template of building design and equipment. When I ...

    Re: Whats the minimum toe kick height you've used?
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- I did furniture toekicks that were 4" tall with a 3" space cut out for the kic ...

    Re: Replacement cartridge filters
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/26) -- We have 6 -13 x 34 nano fiber filters on a 15hp cyclone. We have ...

    Re: Best work van?
    A message posted at WOODWEB's Business and Management Forum (12/26) -- Tony, I had a 2005 and put over 325,000 miles on it. The price difference betw ...

    Re: Whats the minimum toe kick height you've used?
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- 2-1/2" is a standard rubber base and about 5-10% of commercial casework jobs utiliz ...

    Re: Paper backed veneer on maple ply
    A message posted at WOODWEB's Veneer Forum (12/26) -- I prefer the PVA glue and will experiment with the iron technique. Has anyone used the FSV glue ...

    Re: Whats the minimum toe kick height you've used?
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- Dishwasher matches a standard toe kick ...

    Actual material thickness vs. Plans
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- Hello everyone, I have been thinking about changing the way I make my cabinets. Using th ...

    Re: Help with Virutex EB25 wiring issue
    A message posted at WOODWEB's Veneer Forum (12/26) -- Well, we have alittle problem. I don’t have a grey wire on my machine, but I think that’s ok. N ...

    Re: Advice on a trestle table with leaves
    A message posted at WOODWEB's Furniture Making Forum (12/26) -- Thanks for the responses. Both were helpful. Rich, I had planned to make a framework ...

    Re: CNC recommendation for school
    A message posted at WOODWEB's CNC Forum (12/26) -- Aaron, what you are considering teaching would have been relevant 15 years ago, but the other cont ...

    Re: Help with Virutex EB25 wiring issue
    A message posted at WOODWEB's Veneer Forum (12/26) -- Matt, I've sent another email, followed up with a voicemail, (not sure if it's a futile attempt ...

    Re: Finishing Products
    A message posted at WOODWEB's Finishing Forum (12/26) -- I used SW products for 20 years encountering so many problems it'd be impossible to list the ...

    Re: Help with Virutex EB25 wiring issue
    A message posted at WOODWEB's Veneer Forum (12/26) -- Matt, I hate to bug you again. I'm having a difficult time determining which post the black wir ...

    Re: Powermatic 201 22" Planer 7.5HP 1PH 230V
    A message posted at WOODWEB's Solid Wood Machining Forum (12/26) -- I had that planer with the helical insert head and a three phase motor. It was OK ...

    Re: Advice needed for new spray system
    A message posted at WOODWEB's Finishing Forum (12/26) -- I use a regular HVLP gravity feed gun with a DeVilbiss bag syatem. https://www.amazon.com/De ...

    Re: Financial Read
    A message posted at WOODWEB's Business and Management Forum (12/26) -- The sky is falling, again! Oh hell, lets have another beer and watch it on CNN ...

    Re: Outboard Fence
    A message posted at WOODWEB's Architectural Woodworking Forum (12/26) -- A really thick (like 1/4" thick) hardened washer or plate would be of g ...

    Re: Outboard Fence
    A message posted at WOODWEB's Architectural Woodworking Forum (12/26) -- Clamping the fence to the table surface before tightening the bolts is an ex ...

    Re: Is this the future of CNC?
    A message posted at WOODWEB's CNC Forum (12/26) -- Could be useful for field work where information isn't known until you are on site, sink cutouts, ...

    Re: Bit type
    A message posted at WOODWEB's CNC Forum (12/26) -- I use an Onsrud 1/16 diameter downshear with a cutting length of somewhere around .280 I believe, ...

    Powermatic 201 22" Planer 7.5HP 1PH 230V
    A message posted at WOODWEB's Solid Wood Machining Forum (12/26) -- Any Reviews / Experience w/ Powermatic 201 22" Thickness Planer? Appreciate ...

    Re: Upgrading existing dustcollector
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/26) -- Sorry Correy I can’t help with that. Good luck. ...

    Re: Is this the future of CNC?
    A message posted at WOODWEB's CNC Forum (12/26) -- Nope, it's a little toy. Did you see depth of cut? Definitely NOT the future of CNC. ...

    Re: Actual material thickness vs. Plans
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- What problem are you attempting to solve? ...

    Re: Is this the future of CNC?
    A message posted at WOODWEB's CNC Forum (12/26) -- In what context? Production? No. Small scale creativity? Maybe. ...

    Re: Thoughts on New Holzher dynestic 7521
    A message posted at WOODWEB's CNC Forum (12/26) -- And what is the z clearanc of this machine?? ...

    Re: What is the sketchiest thing you've ever seen done with a machine?
    A message posted at WOODWEB's Solid Wood Machining Forum (12/26) -- Maybe not sketchy, maybe not insane, but foolish and stupid- I set up a shaper, s ...

    Re: Barrier coat question
    A message posted at WOODWEB's Finishing Forum (12/26) -- Pete D, you're writing about waterborne systems but this discussion is about solvent plural ...

    Re: Opinions of Laguna SmartShop II and III
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- Brandon, I have a Smartshop 2 that I got new 7 years ago. I had a few electrical problem ...

    Re: Cabnetware Transition
    A message posted at WOODWEB's CNC Forum (12/26) -- I checked out the supposed better cabinet vision.Found out that it is not better as the sales pers ...

    Kremlin 04.120 pump
    A message posted at WOODWEB's Finishing Forum (12/26) -- I picked up some spray equipment and one of the items that came with the lot is a Kremlin 04 ...

    Mattison 202 SLR Wiring and Setup
    A message posted at WOODWEB's Solid Wood Machining Forum (12/26) -- I am wiring a Mattison 202 straight line rip in a new shop. The serial number, 20 ...

    Re: Biomass Furnace
    A message posted at WOODWEB's Business and Management Forum (12/26) -- Scott, Biomass Combustion Systems, Worcester, MA. If you decide it's the type ...

    Re: Biomass Furnace
    A message posted at WOODWEB's Business and Management Forum (12/26) -- Mark, What is the manufacturer of the furnace that you are using? Scott ...

    Re: Tipping Delivery Drivers?
    A message posted at WOODWEB's Business and Management Forum (12/26) -- That is a good story from Chicago, an absolute pit of extortion, as you put it ...

    Re: Tipping Delivery Drivers?
    A message posted at WOODWEB's Business and Management Forum (12/26) -- My wife has a great story about tipping/bribery from years ago in Chicago. She ...

    Re: alaska chainsaw mill
    A message posted at WOODWEB's Sawing and Drying Forum (12/26) -- I use a Husqvarna 385XP (85 cc) with a 42" bar on my home built rolling chainsa ...

    Re: Spindle clamp down sensor alarm
    A message posted at WOODWEB's CNC Forum (12/26) -- Dave- We used to run into this daily where the plc would tell us it hit a time out in a tool chang ...

    Re: can't find the right help
    A message posted at WOODWEB's Business and Management Forum (12/26) -- El Guopa, $15/hr might be considered a poverty wage for people who feel like t ...

    License A Patent
    A message posted at WOODWEB's Business and Management Forum (12/26) -- Don't laugh but I am in the process of filing for a provisional patent on a wo ...

    Re: Question for the small shop guys
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- JP, If all the things the CNC could do for you were absolutely free, how many of your ot ...

    recoat primer or shoot extra top coat?
    A message posted at WOODWEB's Finishing Forum (12/26) -- I am painting Baltic birch plywood including the edge grain. I am currently sanding the raw ...

    Re: Question for the small shop guys
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- I have a 4x8 table off the back of my saw and a 4x4 off the left side. I just set up a s ...

    waterborne primer, anyone use Kilz Max?
    A message posted at WOODWEB's Finishing Forum (12/26) -- I am currently using BIN over Baltic birch plywood. I want to switch to all waterborne, my m ...

    Edgebander options advice
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- I'm looking to upgrade my edgebanding capability in the shop and am considering one of t ...

    Re: Need to kill some bugs
    A message posted at WOODWEB's Sawing and Drying Forum (12/26) -- A 120V base board heater can be made to work. They come with a built in safety therm ...

    Re: Question for the small shop guys
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- If possible, I have a local bigger shop cut sheets down into 24" (or whatever width ...

    Re: Basic CAD solution for submittals?
    A message posted at WOODWEB's CAD Forum (12/26) -- Its been actually quit easy dealing with them. We simply send them the scope of work and the archi ...

    Re: Shelf Construction
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- Torsion box shelves. They are strong. MDF? I'm not sure about that. I always use plywood ...

    Re: Tipping Delivery Drivers?
    A message posted at WOODWEB's Business and Management Forum (12/26) -- I know a GC who tips himself on the front and backend and even after that ask ...

    Re: Looking for marketing ideas for shop
    A message posted at WOODWEB's Business and Management Forum (12/26) -- David , join your local chamber of commerce , it will put you in touch with hu ...

    Re: Alphacam on Windows 10
    A message posted at WOODWEB's CNC Forum (12/26) -- Do you need a newer version ,,,email me and I'll send you over a copy Number000073@gmail.com To gi ...

    Re: building a bench cabinet over a radiator?
    A message posted at WOODWEB's Cabinetmaking Forum (12/26) -- If you look this up in the knowledge base you should find some information, it has come ...

    Re: waterborne primer, anyone use Kilz Max?
    A message posted at WOODWEB's Finishing Forum (12/26) -- Wurth Baer Supply carries MLC Aqualente, they should be able to ups ground ship it to you ...

    Re: waterborne primer, anyone use Kilz Max?
    A message posted at WOODWEB's Finishing Forum (12/26) -- Agualente WB Pigmented Primer is also available at Pond Cove Paint. John ...

    Re: starting small funiture shop
    A message posted at WOODWEB's Furniture Making Forum (12/26) -- If you are going to be doing this to keep yourself occupied in retirement, then go fo ...

    Re: Windows Emulators for the Mac
    A message posted at WOODWEB's CAD Forum (12/26) -- Thanks RSI. I ended up getting Parallels V10, running it on an iMac OSX 10.9.5 with Windows 8.1. I ...

    Re: carving cavity in tree trunk
    A message posted at WOODWEB's Sawing and Drying Forum (12/26) -- mark . The tree top will more than likely start to die back when you carve a cavity ...

    Re: uneven cut on bandsaw mill
    A message posted at WOODWEB's Sawing and Drying Forum (12/26) -- I have had to get my blade guides squared up on a lathe and a bit taken off the fron ...

    Re: How do I machine a base like this? (The scalloped out part)
    A message posted at WOODWEB's Solid Wood Machining Forum (12/26) -- That's not how Osborne did it, they have production machinery to do it, but witho ...

    Using tobacco kiln to dry lumber?
    A message posted at WOODWEB's Sawing and Drying Forum (12/26) -- I have a bunch of white oak boards that i cut about a month ago. I would like to use ...

    Re: carving cavity in tree trunk
    A message posted at WOODWEB's Sawing and Drying Forum (12/26) -- Thanks but that's a nest box. The purpose of this project is look at the feasibility ...

    Re: Nap Gladu AirPro Collet
    A message posted at WOODWEB's CNC Forum (12/26) -- Finally got it. I was shipped to BVC across the county and they had to reship it to me. The paper ...

    Re: How do I machine a base like this? (The scalloped out part)
    A message posted at WOODWEB's Solid Wood Machining Forum (12/26) -- Heres an example of part of the look im going for. http://www.tomsprice.com/dinin ...

    Re: Windows Emulators for the Mac
    A message posted at WOODWEB's CAD Forum (12/26) -- I agree with Rich as I am running parallels on a macbookpro as well. I use cabinet vision perfectl ...

    Re: How do I machine a base like this? (The scalloped out part)
    A message posted at WOODWEB's Solid Wood Machining Forum (12/26) -- Thx. Its a table for a childhood friend. I suggested we use that and id add some ...

    How do I machine a base like this? (The scalloped out part)
    A message posted at WOODWEB's Solid Wood Machining Forum (12/26) -- http://www.osbornewood.com/1173.cfm ...

    Re: smooth wavy lines in ACAD w/o faceting?
    A message posted at WOODWEB's CAD Forum (12/26) -- Thanks for your feedback folks. :) ...

    Re: Cabinet Software
    A message posted at WOODWEB's CAD Forum (12/26) -- Cabinet Pro CNC is software that will take you from design to bidding, to cutlists, to panel optim ...

    Re: bad crown miters
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/26) -- 1/4 gaps are hard to fill and profile after the fact. Each corner do ...

    Re: Cabinet Software
    A message posted at WOODWEB's CAD Forum (12/26) -- Hi Brian, I work for KCD Software, we have software that will go from Design straight thru creatin ...

    Re: Cabinet Software
    A message posted at WOODWEB's CAD Forum (12/26) -- Take a look at Cabinet Pro Software. I have used it exclusively for the past 12 years. I design, b ...

    Re: Cracking paint/caulk where crown meets ceiling
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/26) -- Thank you for the detailed response! Where can I buy Phenoseal? Is i ...

    Re: AutoCAD courses, fork in the road
    A message posted at WOODWEB's CAD Forum (12/26) -- Hi All, I found here some discussion regarding Auto Cad, If you want more discussing & better ...

    epoxy vs glue
    A message posted at WOODWEB's Adhesives Forum (12/26) -- When it comes to laminating up stock for thickness I have always use 2 part West System Epox ...

    Re: Aluminum Straightedge
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/26) -- I use MDF with high pressure laminate glued to both sides (leftover ...

    Re: Not much activity here ............
    A message posted at WOODWEB's Value Added Wood Processing Forum (12/26) -- I am here and new to this site because of this forum :) I run a wood shop ...

    Re: Uses for hardwood waste
    A message posted at WOODWEB's Value Added Wood Processing Forum (12/26) -- Wish I had that trouble. I have a lot of soft wood and little hardwood her ...

    Re: Larch / Tamarack properties
    A message posted at WOODWEB's Value Added Wood Processing Forum (12/26) -- Is it larch is similar to douglas fir in properties. It is good for struct ...

    Re: Homag/Brandt edgebander parts
    A message posted at WOODWEB's Cabinetmaking Forum (11/26/23) -- Too much $ for an old machine and unknown ETA from Europe. ...

    Re: Shaping Question
    A message posted at WOODWEB's WOODnetWORK Forum (11/26/22) -- Zero clearance sub fences can close the opening between the fence halves when removing ...

    Thickness sanding MDF?
    A message posted at WOODWEB's Architectural Woodworking Forum (11/26/22) -- I have never had a need for an odd ball thickness of MDF bit I am matchin ...

    Re: Thickness sanding MDF?
    A message posted at WOODWEB's Architectural Woodworking Forum (11/26/22) -- RE the MDF Ive definitely seen issues if your just removing one face of t ...

    Re: Curved Glass
    A message posted at WOODWEB's Cabinetmaking Forum (11/26/22) -- Small rounds of curved glass are never going to be had for a reasonable price. It's a ...

    Re: When will it end....
    A message posted at WOODWEB's Architectural Woodworking Forum (11/26/22) -- It appears the resin/wood panels are stopped into a conventional doweled ...

    Re: Thickness sanding MDF?
    A message posted at WOODWEB's Architectural Woodworking Forum (11/26/22) -- In a previous shop we edged with 1/4" under veneer then hot pressed ...

    Curved Glass
    A message posted at WOODWEB's Cabinetmaking Forum (11/26/22) -- I’m building a violin cabinet, with the violin set horizontally (as in Krenov’s Violi ...

    Re: Thickness sanding MDF?
    A message posted at WOODWEB's Architectural Woodworking Forum (11/26/22) -- Definitely sand both sides of the MDF, and you will want to use a crossba ...

    Re: dovetails on prefinished stock
    A message posted at WOODWEB's Cabinetmaking Forum (11/26/22) -- not sure ...

    Re: Curved Glass
    A message posted at WOODWEB's Cabinetmaking Forum (11/26/22) -- Thank you, Leo. ...

    Re: Book
    A message posted at WOODWEB's Cabinetmaking Forum (11/26/21) -- Thank you gentlemen. I hope you enjoy the read. Let me know if you have suggestions o ...

    Re: Mdf sheets cutout
    A message posted at WOODWEB's CNC Forum (11/26/21) -- I wouldnt bother with PCD for MDF. I'd just run solid carbide or insert depending on what your ...

    Heating up the shop
    A message posted at WOODWEB's Business and Management Forum (11/26/21) -- Hello everyone. I have a medium-sized shop with no gas connection or space ...

    Re: Heating up the shop
    A message posted at WOODWEB's Business and Management Forum (11/26/21) -- Depending on your location and insulation an air source heat pump might be ...

    Re: Is this "spray booth setup" dangerous?
    A message posted at WOODWEB's Finishing Forum (11/26/21) -- Sounds like the whole operation is operating under the radar. Are you being paid as an in ...

    Re: cherry sap stain
    A message posted at WOODWEB's Finishing Forum (11/26/21) -- The trouble with matching cherry heartwood to sapwood when new, is what happens in 5 year ...

    Re: Heating up the shop
    A message posted at WOODWEB's Business and Management Forum (11/26/21) -- What kind of insulation? If not already, spend the money on the spray foam. ...

    Re: Heating up the shop
    A message posted at WOODWEB's Business and Management Forum (11/26/21) -- The only electric heater I would suggest is a couple of mini-split units ba ...

    Re: Planer indeed rollers
    A message posted at WOODWEB's Solid Wood Machining Forum (11/26/21) -- Decide which one to use according to the size of your raw materials, the size ...

    Re: Mdf sheets cutout
    A message posted at WOODWEB's CNC Forum (11/26/21) -- Thank you for your response I have to cut to size squares and curve shapes with some grooves in ...

    Re: Book
    A message posted at WOODWEB's Cabinetmaking Forum (11/26/21) -- Wish I'd have seen this sooner to have some reading on the holiday. Thanks a bunch Da ...

    Re: Book
    A message posted at WOODWEB's Cabinetmaking Forum (11/26/21) -- Just ordered a copy from Amazon , looking forward to stair book also. Thanks Dave! ...

    Re: Book
    A message posted at WOODWEB's Cabinetmaking Forum (11/26/21) -- I ordered one as well, Looking forward to getting it. ...

    Re: Trouble Importing DXF's to Mozaik
    A message posted at WOODWEB's CAD Forum (11/26) -- Into ACAD2014 and scaled down (as mentioned above), I hit OVERKILL to see if there were duplicated ...

    William and Hussey users
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- I have been looking for a used William and Hussey moulder, I have noticed that there are ...

    Stair jig for depot bought treads and riser kit
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/26) -- I am doing a job with 27 treads and risers, using the pre-made kit s ...

    Re: Backsplash caulking pulling away from countertop
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/26) -- I personally use Tower Tech caulk. The black tube for better quality ...

    Re: 3/8 overlay soft close hinges
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- As an example. For partial overlay, it's usually half an inch. I use Blum hardware. A st ...

    Re: 3/8 overlay soft close hinges
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- thanks for the replies. I should have mentioned that these are face frame cabinets. I fo ...

    Re: William and Hussey users
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- I've never changed the bearings, but nobody uses custom ball bearings. I've never seen a ...

    3/8 overlay soft close hinges
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- I'm looking for soft close hinges with a 3/8" overlay. I need 50 of them. Any recom ...

    Re: 3/8 overlay soft close hinges
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Mike. Thank you for the info. That’s what I need. Thanks for the help. Do you know if th ...

    Re: 3/8 overlay soft close hinges
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- not sure if i am missing something but the book shows 38N355b.06 is a 3/8 overlay face f ...

    Re: William and Hussey users
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- What Rich wrote. What you see on their website is what’s available. We’ve used ours a to ...

    Re: 3/8 overlay soft close hinges
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- A 4.5 mm plate with a straight arm overlay hinge will do what you're looking for. ...

    Re: William and Hussey users
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- for what its worth harrisburg, pa craigslist has one listed right now ...

    Re: 3/8 overlay soft close hinges
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Thicker plate with the hinges you normally use? ...

    Re: 3/8 overlay soft close hinges
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- 5/16 but not 1/4 ...

    Re: Laser Wood Business Cards
    A message posted at WOODWEB's Business and Management Forum (11/26) -- A card that is perceived as unusual will hang around longer. Like the holiday ...

    Re: Shaper fence setup
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Used to be, and probably still is, when you buy a top of the line Weinig, they give you ...

    Stiles Machinery
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Big thanks to Stiles Machinery Michigan My 2000 low hour Weeke Bp60 hard drive died a co ...

    Re: Widebelt Sander Help Needed
    A message posted at WOODWEB's Solid Wood Machining Forum (11/26) -- To adjust the hold down rollers you can run in a pair of boards, one on each side ...

    Re: Vacuum Lift information for 5X12 CNC
    A message posted at WOODWEB's CNC Forum (11/26) -- Great help, guys, thanks! Lee, you may be right about the track system. We're laying out a scale m ...

    Re: Vacuum Lift information for 5X12 CNC
    A message posted at WOODWEB's CNC Forum (11/26) -- Matt I don't know your situation and layout. You may move your operation soon or never. The track ...

    Biesse Akron 645, presser not working correctly
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Hi, I own an edgebander Biesse Akron 645 running sintra software, but I am having a prob ...

    Re: Vacuum Lift information for 5X12 CNC
    A message posted at WOODWEB's CNC Forum (11/26) -- Matt, my two cents on this is if I had to do it again I would go with the track system. The boom w ...

    Re: Contrasting wood banding on table
    A message posted at WOODWEB's Furniture Making Forum (11/26) -- Well, I am one taking another look at wood movement. After 45 years as a professional ...

    Opaque Finish for Kitchen Cab Doors
    A message posted at WOODWEB's Finishing Forum (11/26) -- Almost all of the work I do is lacquer/cv clear finishing but my client wants her doors in a ...

    Re: Laser Wood Business Cards
    A message posted at WOODWEB's Business and Management Forum (11/26) -- It seems it was over 30 years ago I bought several orders of cards from Cards ...

    Re: brand of caulking
    A message posted at WOODWEB's Finishing Forum (11/26) -- Bolt White Lightning. For door panels I like to get the toothpaste type tube. I use my edge ...

    Re: Resin resources
    A message posted at WOODWEB's Furniture Making Forum (11/26) -- We jumped on the slab and river tables as quick as we could. All we do is flatten the ...

    Re: Annual merit raises, etc
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Sea44 - If for nothing else, cost of living is 3% a year. $20.00/hr becomes $2 ...

    Re: Vacuum Lift information for 5X12 CNC
    A message posted at WOODWEB's CNC Forum (11/26) -- We'll probably look into a boom style, I don't think we'll need to spend the cash to get the extra ...

    Hotel Renovation and Improvements
    A message posted at WOODWEB's Finishing Forum (11/26) -- We are looking for more information on woodworking skills and best practices in the industry ...

    Re: You're welcome
    A message posted at WOODWEB's Business and Management Forum (11/26) -- The sky is falling, run for cover. Err that was just a pigeon flying over. You ...

    Re: Great resources
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Try the link below Woodwork Career Alliance (WCA) is to support workforce development fo ...

    Re: Modern smooth face on exterior doors
    A message posted at WOODWEB's Architectural Woodworking Forum (11/26) -- We used medex for exterior raised panels on one of the big houses. They abso ...

    Re: RE: Tersa Blades-- Re-sharpening
    A message posted at WOODWEB's Solid Wood Machining Forum (11/26) -- Unimerco in Saline, MI sharpens CARBIDE tersa blades (only). they will not sharpe ...

    thermoforming
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/26) -- Im in the process of purchasing an italpresse estrema air membrane pres ...

    brand of caulking
    A message posted at WOODWEB's Finishing Forum (11/26) -- looking for opinions for the best brand of caulking when caulking the center panel of doors ...

    Re: Finish problems
    A message posted at WOODWEB's Finishing Forum (11/26) -- i'm using Chemcraft aquaprime for primer and their CV for topcoat. Anyone else here use Chem ...

    Re: Source for desk leg
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- If you just need one or two, I'd suggest cannibalizing some from a used office furniture ...

    Re: Finish problems
    A message posted at WOODWEB's Finishing Forum (11/26) -- We stopped using the Aquaprime a few months ago. My finisher was pending to much time strain ...

    Great resources
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- We would like to be directed to a place with info on basic woodworking skills to help so ...

    Re: Opaque Finish for Kitchen Cab Doors
    A message posted at WOODWEB's Finishing Forum (11/26) -- Just have the color tinted to the product of CV you usually use. They get the color they wan ...

    Source for desk leg
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Does anyone know where to get a desk leg similiar to what is shown in the picture? Not t ...

    Re: Finish problems
    A message posted at WOODWEB's Finishing Forum (11/26) -- Yes the stuff has to constantly be strained! What is MLC? And is the adhesion good for refin ...

    Re: Finish problems
    A message posted at WOODWEB's Finishing Forum (11/26) -- Actually, in this case I'm remembering I used the Chemcraft Plastiprimer (solvent base) for ...

    Re: Source for desk leg
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- relatively wide selection there is another site but I can't remember it. ...

    Re: White spots on catalyzed varnish
    A message posted at WOODWEB's Finishing Forum (11/26) -- possible catalyst bloom ...

    Re: Finish problems
    A message posted at WOODWEB's Finishing Forum (11/26) -- Is that agualente from ML Campbell? ...

    Re: Source for desk leg
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Great idea, thanks Jim ...

    Re: thick bar tops
    A message posted at WOODWEB's CNC Forum (11/26) -- 400 ipm is too fast. Slow it down to 150 ipm at the same rpm. I've done this for years on 1" ...

    Re: Pivot Door Jamb
    A message posted at WOODWEB's Architectural Woodworking Forum (11/26) -- There is no given reason for eliminating the stop on the head of the door. I ...

    Re: Business And Management
    A message posted at WOODWEB's Business and Management Forum (11/26) -- I would recommend college courses, night classes, managing a business for some ...

    Re: Business And Management
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Ryan, MarkB and the google Thanks guys, that was very informative. I am now 10 ...

    Velvet jewelery drawers
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- I am trying to find a supplier for velvet/felt jewelry drawers. We are trying to do a si ...

    Re: thick bar tops
    A message posted at WOODWEB's CNC Forum (11/26) -- A rougher tool for the first passes will speed it up, or you could use a bit with a chip breaker. ...

    Laminated Wood Flooring Moisture Content
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/26) -- We are making 15mm thick laminated wood flooring. 4mm thick White Oak t ...

    Re: Door stop
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- We use Blum 110 insertas for 99% of doors. This model hinge has a restrictor clip that m ...

    Laminated wood flooring moisture content
    A message posted at WOODWEB's Veneer Forum (11/26) -- We are making 15mm thick laminated wood flooring. 4mm thick White Oak top layer, 11mm of birch ...

    Re: Raised panel shaper passes
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- The 7/8" is what we are comfortably getting out of this lot of 4/4 rough sawn Cherr ...

    Ambrosia MAple
    A message posted at WOODWEB's Sawing and Drying Forum (11/26) -- A colleague of mine asked about some ambrosia maple that has been kilned dried, but ...

    Re: thick bar tops
    A message posted at WOODWEB's CNC Forum (11/26) -- You might want to call CR Onsrud or Vortex if you are doing much of this. Here is a video of a CR ...

    Re: thick bar tops
    A message posted at WOODWEB's CNC Forum (11/26) -- Im thinking that the doubling of the bit reducing the stiffness by a factor of 4 is whats going on ...

    Re: Prop 65
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Easy to say but not easy to do when they have filed a lawsuit against you. Loo ...

    Re: thick bar tops
    A message posted at WOODWEB's CNC Forum (11/26) -- Have to be surprisingly careful with long tools. Just cut very shallow cuts and will be fine, and ...

    Re: Lighting for a Cabinet Making / Furniture Making Shop
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- I switched all of my fixtures from fluorescent to LED. My local power company paid for a ...

    Re: thick bar tops
    A message posted at WOODWEB's CNC Forum (11/26) -- Don't forget that when you double the length of the bit you cut the stiffness by a factor of four. ...

    Raised panel shaper passes
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- 7.5hp shaper 1hp power feeder, 6" diameter raised panel cutter. How many passes for ...

    Re: Velvet jewelery drawers
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Hey Joe- we used this company a long time ago, and they did a great job: https://www.ste ...

    Re: thick bar tops
    A message posted at WOODWEB's CNC Forum (11/26) -- They have an advantage by putting the part on pods and doing a full depth cut - no need to worry a ...

    Re: Velvet jewelery drawers
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- You can build and divide them, then spray flocking on them. Flockit.com for supplies. ...

    Re: Prop 65
    A message posted at WOODWEB's Business and Management Forum (11/26) -- I'd tell that lawyer that he'd make more money chasing ambulances than chasing ...

    Re: Velvet jewelery drawers
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Search " the October company" They did a great job for me. ...

    Re: Raised panel shaper passes
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- 1 pass. Those are going to be heavy doors with a 7/8" panel. ...

    Re: Velvet jewelery drawers
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- I've also used October Company several times with good results. ...

    Re: Raised panel shaper passes
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- 1 Pass 6000 rpm. Ends first of course. ...

    Re: Ambrosia MAple
    A message posted at WOODWEB's Sawing and Drying Forum (11/26) -- Yes it needs to be dried and sterilized again. ...

    Re: Raised panel shaper passes
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- 1 pass at 5600 rpm here. ...

    Re: Employees
    A message posted at WOODWEB's Finishing Forum (11/26) -- Aren't we all looking for that person!! ...

    Re: Raised panel shaper passes
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- One here also ...

    Re: Raised panel shaper passes
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Single pass. ...

    Re: Shop drawings being used as design documents
    A message posted at WOODWEB's Business and Management Forum (11/26) -- That is very frustrating. We've been there. Because of this we have a clause i ...

    Re: Programs to Draw Furniture Designs
    A message posted at WOODWEB's Furniture Making Forum (11/26) -- Another SketchUp user. As said, there is a free version and it does everything I need ...

    Re: Peeled Tree Stumps
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- You thought that kind of thing is commercially available? Hope you didn't give them a bi ...

    Re: dust removal
    A message posted at WOODWEB's Finishing Forum (11/26) -- We use air and on flat surfaces (dining tables and conference tables) air and tack rags. We ...

    Peeled Tree Stumps
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Okay, I have a client who wants about 32' of rustic bookshelves in their chalet. They wo ...

    Re: Blades for new slider
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- I like FS tools XL series of blades. This is the one I use on my slider when using a sco ...

    Re: Peeled Tree Stumps
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- When looking for random, rustic stuff like this, I've had luck recruiting guys that cut ...

    Re: dust removal
    A message posted at WOODWEB's Finishing Forum (11/26) -- I have been using Endust on CV and precat for 4 years now. No problems to date. Always do a ...

    Re: Blades for new slider
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Years ago we made the switch to Forrest and never tried any other blade since then. They ...

    Re: dust removal
    A message posted at WOODWEB's Finishing Forum (11/26) -- I use Endust sprayed on a rag. It pulls all the dust out. and NO it doesn't bother the finis ...

    molder heads
    A message posted at WOODWEB's Solid Wood Machining Forum (11/26) -- I am setting up a weineg 23e 6 head molder, It came with 2 insert side heads that ...

    Re: Bar Foot Rail
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- I did a bar on a US army fort o club a few years ago.. for anything beyond polished Bras ...

    cnc post
    A message posted at WOODWEB's CAD Forum (11/26) -- Desperately need help to set a post on vcarvpro software to cnc omnitech spectra with syntech cont ...

    Faulty bandsaw switch?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/26) -- I've got an SCM 3 phase 220v 7.5hp bandsaw motor that will buzz when power button ...

    Re: Appliance installation callbacks policy
    A message posted at WOODWEB's Business and Management Forum (11/26) -- I have added it to my contract as well that we are not responsible for applian ...

    Anyone using LED shop lights?
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- I'm currently using 8' fluorescent lights in the shop, recently bought a 4' LED for a sm ...

    Hebron hot air edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Hi all, I found a used hebrock akv83 edgebander for a good price. Just wondering if anyo ...

    Re: Anyone using LED shop lights?
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Just replaced my shop with them and have been really impressed. The light is much bright ...

    Re: Small parts moving
    A message posted at WOODWEB's CNC Forum (11/26) -- Question, since you are doing a onion skin ...are you cutting your parts on the first pass, leavin ...

    Re: Appliance installation callbacks policy
    A message posted at WOODWEB's Business and Management Forum (11/26) -- I have it in my contract that I'm not responsible for appliance installation. ...

    Re: Appliance installation callbacks policy
    A message posted at WOODWEB's Business and Management Forum (11/26) -- I fight this battle quite often as well.. I have just added a few labor hours ...

    Re: Faulty bandsaw switch?
    A message posted at WOODWEB's Solid Wood Machining Forum (11/26) -- I would recheck the electrical connections. If one leg has a bad connection that ...

    Re: Small parts moving
    A message posted at WOODWEB's CNC Forum (11/26) -- This is just a picture I found online , I don't have any of my own work using tabs . But you'll se ...

    Re: Small parts moving
    A message posted at WOODWEB's CNC Forum (11/26) -- Vac has a lot of variables, the first and probably most common fix for small parts it to cut them ...

    Re: Anyone using LED shop lights?
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Yes, I have been replacing them at the rate of one or two a month as bulbs in the old fl ...

    Re: gluing slab tables
    A message posted at WOODWEB's Furniture Making Forum (11/26) -- We gave up even putting glue on biscuits when gluing up panels. I've seen enough prin ...

    Re: Hebron hot air edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- It was my first edgebander prior to automatic one and it saved us a ton of time. Very we ...

    Re: Small parts moving
    A message posted at WOODWEB's CNC Forum (11/26) -- We do use onion skinning approach but when it is making the final through cuts, that's when the pa ...

    Re: Anyone using LED shop lights?
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- They are great. Our local utility had a rebate program that paid for most of the cost of ...

    Re: Anyone using LED shop lights?
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- I use T5HO 54 watt. LEDs are not brighter. Might be less expensive to run though. ...

    Re: ml campbell ww vinyl sealer
    A message posted at WOODWEB's Finishing Forum (11/26) -- Vinyl sealer is an isolation barrier and water layer. Not designed to do anything more. ...

    Re: Small parts moving
    A message posted at WOODWEB's CNC Forum (11/26) -- I cut small parts first and use tabs as required. Very seldom have an issue with this approach. ...

    Re: recoating of feeder rollers on edge bander
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- http://www.padsmore.com/edgebanders-rollers.htm ...

    Re: Small parts moving
    A message posted at WOODWEB's CNC Forum (11/26) -- The picture is from Vcarve Pro. My Thermwood router does this in the nesting software also. ...

    Re: Tineo veneer match
    A message posted at WOODWEB's Veneer Forum (11/26) -- Less expensive? price range is .95 to 3.00 a square foot. Seems pretty cheap to me. ...

    Re: Small parts moving
    A message posted at WOODWEB's CNC Forum (11/26) -- Tabs are little bridges between parts or between parts and waste areas. ...

    Re: Small parts moving
    A message posted at WOODWEB's CNC Forum (11/26) -- This is the picture ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- If you have worked out your plan that includes a plan B, go for it. I've been ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- I don't think a hot air bander cares what the substrate is any more than a glu ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Marketing to woodworkers is a bit easier because of sites like this. Also, mar ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Larry, I didn't know what a hot air bander was (thought they were cheap pos &l ...

    Problem with kreg Forman pocket hole machine
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- My kreg Forman pocket hole machine, which is fully pneumatic, is bogging down and comple ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Blake, I actually had a person buy into my business in 1995 as a partner. He p ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- My answer to your marketing ideas are Meh As Socrates stated the biggest barri ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Pat, I do understand what you are saying and I add that more than just a marke ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Rich, This forum is full of people who are successful owner/operators of small ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Blake, I do think it's possible to pull off what you're considering. Everythin ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Advertising and marketing are two different things, hopefully you realize that ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Blake, why don't you burn 50K and kick yourself in the nuts a few times. It wo ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Pat I feel like a business is an integrated whole such that any one part affec ...

    Re: wrinkling in veneer....causes?
    A message posted at WOODWEB's Veneer Forum (11/26) -- Ironically the wrinkling happened inside of the border on both sides. It went in about 4' and l ...

    Re: wrinkling in veneer....causes?
    A message posted at WOODWEB's Veneer Forum (11/26) -- Because I'm using a flat press I am using the bottom platen to press down against the table. Th ...

    Re: wrinkling in veneer....causes?
    A message posted at WOODWEB's Veneer Forum (11/26) -- Because I'm using a flat press I am using the bottom platen to press down against the table. Th ...

    Re: wrinkling in veneer....causes?
    A message posted at WOODWEB's Veneer Forum (11/26) -- It is unclear from your pick where the wrinkling is. I press stuff with the veneer going in all ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- When I started doing custom woodworking, I liked the idea of doing custom wood ...

    Re: edgebander glue
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Better bond? Maybe, more depends on doing the correct setup. Slow machines typically hav ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- And you think you're the first person to think of that? Lean is about CONSTANT ...

    Re: Sketchup to Xilog Maestro
    A message posted at WOODWEB's CNC Forum (11/26) -- Hi Yaacov, You are right in your observation, but essentially there is no reason for this differen ...

    Re: edgebander glue
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Stay away from the filled glue. Use the unfilled glue which is a 280.30(natural) 280.60 ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Don't get all supercilious with me. You are taking this personally. BTW the en ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Another thing that strikes me is how successful people are at marketing to woo ...

    Re: edgebander glue
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- HI Chris. Thanks for the info. I was wondering what glue can with the machine? how do yo ...

    Re: Problem with kreg Forman pocket hole machine
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- I hadn't thought about that Pat. I did have trouble with that once before but I can't re ...

    Scm fs 410 adjustment
    A message posted at WOODWEB's Solid Wood Machining Forum (11/26) -- Hi,i recently bought a Scm fs 410,year 1996.the tables are not lining up very wel ...

    Re: Problem with kreg Forman pocket hole machine
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- Look at the activation switch, especially if it is a foot switch. Look for debris build ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Engineers also routinely suffer from earning a healthy 6 figure salary.....do ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- The marketplace is going to be in your face plenty (especially if you get into ...

    Re: Attaching floor to ceiling panels to wall
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/26) -- The "blue " star hanger idexes and snaps on from the front ...

    Re: wrinkling in veneer....causes?
    A message posted at WOODWEB's Veneer Forum (11/26) -- What's the substrate? Was it dry? Is that frame around the outside solid wood, or veneer? What ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- Then you fail to realize that the marketing plan dictates every other aspect o ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- My bad, yea I did take that a little personal. I have yet to cross the year 35 ...

    Re: Determining Vacuum Holddown
    A message posted at WOODWEB's CNC Forum (11/26) -- We run a Quincy 15hp rotary screw vacuum pump on a 5x12 with no issues, and uses very little power ...

    Re: considering a partnership
    A message posted at WOODWEB's Business and Management Forum (11/26) -- What strikes me about this thread is the absence of a marketing plan. EVERYTHI ...

    Re: edgebander glue
    A message posted at WOODWEB's Cabinetmaking Forum (11/26) -- One other question. Will i get a better bond with an unfilled glue? ...

    Re: Biesse Rover 24 or 23FT and Vcarve Pro
    A message posted at WOODWEB's CNC Forum (11/26) -- Yaakov what does the polyboard package cost? ...

    Re: 5000 cfm limit
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/26) -- Bob, it all relates to the NFPA 654. Google it and you will find ...

    Re: Back splashes popping off everywhere!
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/26) -- I could see where your kicker strips could easily be adding a lot of ...

    Re: cnc camparison
    A message posted at WOODWEB's CNC Forum (11/26) -- I really don't think it matters what controller you have, or what cnc you have. What matters is wh ...

    Re: Reclaimed Fence Boards on Plywood
    A message posted at WOODWEB's Furniture Making Forum (11/26) -- Bill, that is one of my major concerns too. I live in Las Vegas where humidity is gen ...

    Re: What software to use?
    A message posted at WOODWEB's CAD Forum (11/26) -- Jack Dave has some videos of how to use Autocad in 3d. If you private email me I will try to put t ...

    Re: Delta DC-33 parallel thickness issue
    A message posted at WOODWEB's Solid Wood Machining Forum (11/26) -- This is the best indicator for jointer knives and all planer adjustments. The but ...

    Re: Software for Corbels & Legs
    A message posted at WOODWEB's CNC Forum (11/26) -- Mike Mezalik did these files for me, You can get Quite crafty with Aspire yet as with any software ...

    Re: Reclaimed Fence Boards on Plywood
    A message posted at WOODWEB's Furniture Making Forum (11/26) -- John, You do know that solid wood shrinks and expands, right? So what moisture conten ...

    Re: 5mm holes chipping out in melamine
    A message posted at WOODWEB's CNC Forum (11/26) -- We switched to solid carbide brad points and have never gotten any chipping again. We used to get ...

    Re: What software to use?
    A message posted at WOODWEB's CAD Forum (11/26) -- Hi Pat, Thanks, I've sent Dave an e-mail for now as I'm still getting to grips with 3D autocad in ...

    Re: LSL Lamination Failure
    A message posted at WOODWEB's Architectural Woodworking Forum (11/26) -- To me, it looks like the first and third picture show LVL core and the third ...

    Re: 5mm holes chipping out in melamine
    A message posted at WOODWEB's CNC Forum (11/26) -- Fly cut the spoil board so it is flat. Take a machinist level and check for a level bed. Have you ...

    Re: Reclaimed Fence Boards on Plywood
    A message posted at WOODWEB's Furniture Making Forum (11/26) -- Sorry, last response was meant for Rich C. in regards to the wood movement --- it's a ...

    Re: Wide Belt Sander Tracking Issue
    A message posted at WOODWEB's Furniture Making Forum (11/26) -- Lots of good advice here. Another problem could be to low of air pressure and/or two ...

    Re: Software for Corbels & Legs
    A message posted at WOODWEB's CNC Forum (11/26) -- Adam, Here is a picture of a support that I am going to cut on my CNC..The file is almost finished ...

    Re: PCD and MDF edges
    A message posted at WOODWEB's CNC Forum (11/26) -- No painting MDF has always been a challenge in my shop.... Diamond will give you a better surface ...

    Re: Sit/Stand Desk
    A message posted at WOODWEB's Furniture Making Forum (11/26) -- Check out Workrite bases for adjustable height workstations. They offer electric, cou ...

    Re: LSL Lamination Failure
    A message posted at WOODWEB's Architectural Woodworking Forum (11/26) -- I meant to say the fourth picture shows either PSL or LSL. I think the first ...

    Re: cnc camparison
    A message posted at WOODWEB's CNC Forum (11/26) -- The shop I work at is considering one of these machines. Any thoughts about one vs the other? ...

    Enchancing a .bmp image in Cabnetware
    A message posted at WOODWEB's CAD Forum (11/26) -- Howdy. I'm having some issues... I scanned in an image of a melamine sample called Linen Canvas. I ...

    Re: ---Walnut Countertop growth rings orientation ???---
    A message posted at WOODWEB's Furniture Making Forum (11/26) -- I agree with Chris on growth rings and biscuits. I would add that any movement you se ...

    Re: If you were to do it all over again?
    A message posted at WOODWEB's WOODnetWORK Forum (11/26) -- An old woodworker I knew when I started told me you only make sweat with your hands. You m ...

    Re: a purchase
    A message posted at WOODWEB's WOODnetWORK Forum (11/26) -- Mark: Having been at this for 30 years I think that from my perspective anyway, in the old ...

    Re: MDF edge showing up through finished veneer
    A message posted at WOODWEB's Veneer Forum (11/26) -- the glue i used on the larger box was hot hide glue and the smaller boxes i used cold press glu ...

    Re: birds eyes
    A message posted at WOODWEB's WOODnetWORK Forum (11/26) -- I've experienced the same thing now and again and it always comes down to contamination! S ...

    Re: MDF edge showing up through finished veneer
    A message posted at WOODWEB's Veneer Forum (11/26) -- Mike, What is the glue that you used and how was the veneer applied? If you are positive that t ...

    Richlite
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (11/26) -- i am going to build cabinet boxes out of richlite, 3/4 inch material. C ...

    Re: Tightest radius for paper back veneer bending?
    A message posted at WOODWEB's Veneer Forum (11/26) -- B.H. Davis, You should be fine making a 4" bend with paperbacked veneer even across the gr ...

    Re: boice crane shaper
    A message posted at WOODWEB's WOODnetWORK Forum (11/26) -- the motor pulley in flat. just use vee belts. any place the sells motors would have a swit ...

    Re: boice crane shaper
    A message posted at WOODWEB's WOODnetWORK Forum (11/26) -- thanks perley ...

    Re: a purchase
    A message posted at WOODWEB's WOODnetWORK Forum (11/26) -- well said cj, thanks ...

    542125.html
    A message posted at WOODWEB's Value Added Wood Processing Forum (11/26) -- Here is some of Joey's burl quarter-matched in a handscraped wood floor in ...

    Re: Door making any suggestions
    A message posted at WOODWEB's CNC Forum (10/26/23) -- Hi Anthony, As David mentioned, we would need to know a little bit more information to give the ...

    finishing techniques
    A message posted at WOODWEB's Finishing Forum (10/26/23) -- I get some customers that bring pics of cabinets that they would like me to do from many ...

    Re: In house door makers: What 1 piece of equipment increased your efficien
    A message posted at WOODWEB's Cabinetmaking Forum (10/26/23) -- I wouldn't climb cut unless the grain of the wood required that without chipping. If ...

    Re: Filter Media for Spray Booth
    A message posted at WOODWEB's Finishing Forum (10/26/23) -- We really like accordion. Lasts a long time. https://www.amazon.com/Accordion-Standard-Pa ...

    Re: Help! Keep getting dark grain when staining white oak
    A message posted at WOODWEB's Finishing Forum (10/26/23) -- Much appreciate the responses Leo and Jeff! I’m gonna look into both of those suggestions ...

    Re: Help! Keep getting dark grain when staining white oak
    A message posted at WOODWEB's Finishing Forum (10/26/23) -- Much appreciate the responses Leo and Jeff! I’m gonna look into both of those suggestions ...

    Re: finishing techniques
    A message posted at WOODWEB's Finishing Forum (10/26/23) -- They have used the same background color that's on the cabinets, not sure if the woods wh ...

    Re: finishing techniques
    A message posted at WOODWEB's Finishing Forum (10/26/23) -- You also have to remember it can be fake and not reproducible in real wood. They've gotte ...

    Re: finishing techniques
    A message posted at WOODWEB's Finishing Forum (10/26/23) -- Holy smokes now I can see it and that makes sense. Web site says its red oak. It gets old ...

    Re: finishing techniques
    A message posted at WOODWEB's Finishing Forum (10/26/23) -- Could even been a dark grey stain with a dark dye used in place of a pigment to get to th ...

    Re: finishing techniques
    A message posted at WOODWEB's Finishing Forum (10/26/23) -- I see what you're saying. I'm going to run several samples and your comment will be one o ...

    Re: RE: Lightening Red Oak
    A message posted at WOODWEB's Finishing Forum (10/26/23) -- 2 part bleach will remove all color and will be left whitish. You can thin the bleach wit ...

    SW gallery
    A message posted at WOODWEB's Finishing Forum (10/26/23) -- Anyone using SW Gallery? 1k waterborne they claim to have the properties of a 2K... thoug ...

    RE: Lightening Red Oak
    A message posted at WOODWEB's Finishing Forum (10/26/23) -- To lighten red oak, can bleach or a similar product be used, to get red oak slightly whit ...

    Re: Good used lathes
    A message posted at WOODWEB's Architectural Woodworking Forum (10/26/23) -- A lot of lathes come up for sale on this page here https://www.facebook.c ...

    Style CNC
    A message posted at WOODWEB's CNC Forum (10/26/23) -- Has anybody had any experience purchasing or using a CNC lathe from a company called style CNC? ...

    Re: Respirator Cartridges
    A message posted at WOODWEB's Finishing Forum (10/26/23) -- I use the 3M 6003 cartridge. Organic/acid. ...

    Re: finishing techniques
    A message posted at WOODWEB's Finishing Forum (10/26/23) -- maybe this url works ...

    Re: Hot air edgebanding - can you get edgeband
    A message posted at WOODWEB's Cabinetmaking Forum (10/26/22) -- Joseph Stahl- this is what I have heard over and over from my customers regarding hot ...

    Re: is hot air edgebanding for production edgebanders available
    A message posted at WOODWEB's Business and Management Forum (10/26/22) -- Bob- I'm happy to introduce myself and share my knowledge on this topic as ...

    Re: Variability in thickness of UV2
    A message posted at WOODWEB's Cabinetmaking Forum (10/26/22) -- this is why i use Garnica UV2. it's consistent - apparently the core is sanded to a u ...

    Re: hsk63f
    A message posted at WOODWEB's CNC Forum (10/26/22) -- anyone else wanna take a stab at this one? lead times for customs are 8-12 weeks. thx mike ...

    Re: a add on dust collection for mdf dust
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/26/21) -- Some business owners are not going to spend a lot of money to ...

    Re: Pump selection
    A message posted at WOODWEB's Finishing Forum (10/26/21) -- CAT AAA guns have interchangeable parts. The difference between the 2 guns is that the la ...

    Re: a add on dust collection for mdf dust
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/26/21) -- Bernie's solutions are good also. No matter what fix you use, ...

    Mixing MLC Resistant and Krystal
    A message posted at WOODWEB's Finishing Forum (10/26/21) -- I need to repaint a few cabinet door fronts and have just a little bit of resistant left. ...

    Re: Construction Details for Vent Hood with Duct Access for Hookup
    A message posted at WOODWEB's Cabinetmaking Forum (10/26/21) -- The hoods are typically designed to be fastened to the wall. The cabinetry simply hid ...

    Re: Troubleshooting SCM Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (10/26/21) -- My SCM edgebanders first trimmer won't return home for the next operation. It will wo ...

    Re: Sac shaper
    A message posted at WOODWEB's Solid Wood Machining Forum (10/26/21) -- Yep. Far right is the lock I believe, and the middle one is the brake. I haven ...

    Re: Construction Details for Vent Hood with Duct Access for Hookup
    A message posted at WOODWEB's Cabinetmaking Forum (10/26/21) -- Get the Specs for the Hood itself as a first start. ...

    Floors
    A message posted at WOODWEB's Finishing Forum (10/26/21) -- Does anyone have any pics of carts you use to spray flooring on thanks in advance ...

    Re: Tax question for the self-employed
    A message posted at WOODWEB's Business and Management Forum (10/26) -- OK. First of all, the amount of tax you pay will depend on your profit. That w ...

    Re: Table saw incident
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- Muscle memory also dangerous. After three years on a regular table saw without a single ...

    Re: CV mixing by volume or weight ?
    A message posted at WOODWEB's Finishing Forum (10/26) -- we use pail liners to mix quickly for less than 5 gal. batches.... We made stir sticks from ...

    CV mixing by volume or weight ?
    A message posted at WOODWEB's Finishing Forum (10/26) -- Do most of you mix by volume or by weight ? I've been mixing by volume for 20 years with nev ...

    Re: SCM K400 Edgebander (No Power to Heating Elements)
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- Hey there, The last time a tech came by to perform some maintenance on our edge bander, ...

    Re: CV mixing by volume or weight ?
    A message posted at WOODWEB's Finishing Forum (10/26) -- Mixing large amounts by weight is a pain in the ass for a number of reasons. Like others, i ...

    Re: tax deduction for church cabinets
    A message posted at WOODWEB's Business and Management Forum (10/26) -- Your labor is not deductible. Since you are reimbursed for materials, there ap ...

    Re: CODA Primer
    A message posted at WOODWEB's Finishing Forum (10/26) -- You answered your own question.... change your tip size to at least a .15 thousandths for th ...

    Re: CV mixing by volume or weight ?
    A message posted at WOODWEB's Finishing Forum (10/26) -- what we did is cut a slot into a sacrificial pail vertical that will act like a window to se ...

    Re: CV mixing by volume or weight ?
    A message posted at WOODWEB's Finishing Forum (10/26) -- It doesn't have to be that accurate. I have varied mine a lot depending on the temperature. ...

    Re: CV mixing by volume or weight ?
    A message posted at WOODWEB's Finishing Forum (10/26) -- Most measuring cups aren't that accurate either, in fact some are quite a bit off. ...

    Re: Varathane oil-based semi-gloss polyurethane
    A message posted at WOODWEB's Finishing Forum (10/26) -- I just build and finished a hickory wood top with the same product (satin) Was not my choice ...

    Re: Homemade blade sharpener from a chainsaw sharpener
    A message posted at WOODWEB's Sawing and Drying Forum (10/26) -- Yes, I agree with the one side sharpening issue of Oregon 511ax. But as a better rep ...

    Re: Contour Edgebanding
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- I haven’t done a full part like that, but the cutters they have work great. You can alwa ...

    Re: Contour Edgebanding
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- One of the pieces I will need to do has banding all the way around. How do you finish it ...

    Re: Contour Edgebanding
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- Festool bander is awesome. I have had 1 for over 4 years and had zero problems. Works gr ...

    Re: High Build Piano Style Finishing
    A message posted at WOODWEB's Finishing Forum (10/26) -- This stuff sounds like a dream. Ive been wondering how the pianolac thing was coming along.. ...

    Re: Varathane oil-based semi-gloss polyurethane
    A message posted at WOODWEB's Finishing Forum (10/26) -- Only the top is new. Base is 20 years old. ...

    Western Red Cedar Solvent Soluble Extractives??
    A message posted at WOODWEB's Finishing Forum (10/26) -- I’m having a bit of difficulty finishing exterior WRC. The house is 4 years old and is being ...

    Re: defect in select white oak KD
    A message posted at WOODWEB's Sawing and Drying Forum (10/26) -- White oak does indeed develop this white streaky color in the living tree from time ...

    Western Red Cedar Solvent Soluble Extractives
    A message posted at WOODWEB's Forestry Forum (10/26) -- I’m having problems with finish blistering on Western Red Cedar as a result of what appears t ...

    Re: can I ask for advice on buying a dependable 4wd truck to use in the woo
    A message posted at WOODWEB's Forestry Forum (10/26) -- I have a 2000 F-250 Ext Cab Super Duty, 7.3l turbo, 4WD, standard trans. Strong, reliable eng ...

    Re: How do I accomplish this finish?
    A message posted at WOODWEB's Finishing Forum (10/26) -- Here's something else you could experiment with. If you have access to lacquer based stains, ...

    Re: Sealer under epoxy coating
    A message posted at WOODWEB's Finishing Forum (10/26) -- The trouble is, if you are trying to fill open grain with a fast drying sealer, they will ei ...

    Re: Cancelled Project
    A message posted at WOODWEB's Business and Management Forum (10/26) -- I think everyone who responded will stay small .A construction company like El ...

    Re: LVL & Garage Door Build??
    A message posted at WOODWEB's Architectural Woodworking Forum (10/26) -- We rabbet the stops and attach an aluminum backed brush strip. When set, it ...

    Re: LVL & Garage Door Build??
    A message posted at WOODWEB's Architectural Woodworking Forum (10/26) -- Thanks for your response David! Yep, I have re-thought my approach and will ...

    Help with Casmec 250-510 Post
    A message posted at WOODWEB's CNC Forum (10/26) -- I am having a problem with a Post for a Cosmec 250 drill bank g-code . looking for g-code Lines th ...

    Re: Scissor lift table
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- Check out the Felder FAT 300XL or 500. Or Barth makes a few differen models. The best pr ...

    Re: How do I accomplish this finish?
    A message posted at WOODWEB's Finishing Forum (10/26) -- Try tempering is first with a reagent such as iron acetate followed by an “oil” dye such as ...

    Re: Another software advice question
    A message posted at WOODWEB's CAD Forum (10/26) -- I've decided to go with Mozaik. ...

    Re: Contractor Change Order for Cabinet Mistake
    A message posted at WOODWEB's Business and Management Forum (10/26) -- Myself, I find this concept appalling, as my policy with customers, be they in ...

    Re: Hiring New Shop Employees
    A message posted at WOODWEB's Business and Management Forum (10/26) -- I mention the Zillow report as this is part of how I help customers manage exp ...

    Re: Measure New Job
    A message posted at WOODWEB's Business and Management Forum (10/26) -- Ryan, You are onto something with the custom note pad for collecting customer ...

    Re: looking to achieve that NC look on walnut using WB
    A message posted at WOODWEB's Finishing Forum (10/26) -- I've been using mostly General Finishes WB products for about 8 years. You can get any look ...

    Re: Contractor Change Order for Cabinet Mistake
    A message posted at WOODWEB's Business and Management Forum (10/26) -- Do you have a Contractors License? If not, you should and not a Specialty Cont ...

    Re: truing an import slr
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- google: One thing that occurs to me is that if you are just buzzing the edge of a board ...

    Re: Measure New Job
    A message posted at WOODWEB's Business and Management Forum (10/26) -- What is your experience level of woodworking ? Are you looking to get a job ? ...

    truing an import slr
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- i've got a 2012 grizzly slr. it appears to be the same as the entry level oliver, cantek ...

    Re: edge gluing direct from s4s/molder
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- I don't mind running panel staves S4S rather than just gluing off of a saw. It makes it ...

    Re: truing an import slr
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- thanks for your replies. i had the same thought about shimming the arbor housing/mount s ...

    Re: Contractor Change Order for Cabinet Mistake
    A message posted at WOODWEB's Business and Management Forum (10/26) -- Do I have this right, you simply supplied the cabinetry to specs provided and ...

    Re: Hafele EKU-Forte pull-out adjustments
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/26) -- I feel your pain and have installed one of these. The top has an adj ...

    Re: Measure New Job
    A message posted at WOODWEB's Business and Management Forum (10/26) -- I used to have a laptop and would let the client scroll through pictures but I ...

    Frameless Finished Ends with Melamine Interiors
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- I don't run into this issue very often, but has anyone applied white cabinet liner to in ...

    Re: Uses of a cnc router ?
    A message posted at WOODWEB's CNC Forum (10/26) -- A CNC router can be used in the production of many different items, such as door carvings, interio ...

    Re: Measure New Job
    A message posted at WOODWEB's Business and Management Forum (10/26) -- One other thing to note: A list like this is tedious to make but you are alrea ...

    Re: truing an import slr
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- I have very little knowledge of the machine but there must be a way to adjust it. Shimmi ...

    Re: Frameless Finished Ends with Melamine Interiors
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- Ive just made melamine boxes, then made a wide panel that matches the door, which gets s ...

    Re: Best CAD /CAM for solid stock woodwork mfg
    A message posted at WOODWEB's CAD Forum (10/26) -- alphacam is what i use . it is real simple . but like most other programs they will eat u up on an ...

    Re: edge gluing direct from s4s/molder
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- thanks for all the help. i messed with it some more and kept getting slightly imperfect ...

    Re: Measure New Job
    A message posted at WOODWEB's Business and Management Forum (10/26) -- I take a tape, a laser measure, and I've started wearing a go-pro camera. I ju ...

    Re: truing an import slr
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- tony - thanks for the thoughts. we're normally cutting away 1/2" + worth of materia ...

    Re: Frameless Finished Ends with Melamine Interiors
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- As in most of the popular veneers you can get 1 side Alder and 1 side white melamine tha ...

    Re: looking to achieve that NC look on walnut using WB
    A message posted at WOODWEB's Finishing Forum (10/26) -- Valspar makes an 'amber' sealer waterborne lacquer coating in the Zenith line. Use of a yell ...

    Spay gun cases
    A message posted at WOODWEB's Finishing Forum (10/26) -- I have a few Anest Iwatas and am looking for a case that will carry em all. supernova ls400 ...

    Re: truing an import slr
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- You should be able to adjust the fence ever so slightly. If it is tailing off towards th ...

    Re: Contractor Change Order for Cabinet Mistake
    A message posted at WOODWEB's Business and Management Forum (10/26) -- The change order has to be provided before the work, and all parties must sign ...

    Re: Grout residue on finish
    A message posted at WOODWEB's Finishing Forum (10/26) -- Answering my own question for others who may happen upon this thread. Murphy's oil soap and ...

    Re: Frameless Finished Ends with Melamine Interiors
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- I usually go the other way. Use a glue back melamine and put a veneer on the glue back s ...

    Re: looking to achieve that NC look on walnut using WB
    A message posted at WOODWEB's Finishing Forum (10/26) -- They have been trying for over 40yrs, ain't gonna happen. WB is getting better, but that's i ...

    Re: looking to achieve that NC look on walnut using WB
    A message posted at WOODWEB's Finishing Forum (10/26) -- Zinsser sealcoat. Add amber Transtint dyes if you want. The seal coat pops the grain. ...

    Re: truing an import slr
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- Well, see how the motor or trunnion is mounted. Maybe there is a place where you can ins ...

    Re: Spay gun cases
    A message posted at WOODWEB's Finishing Forum (10/26) -- Get one of the system boxes by Festool, Milwaukee or DeWalt etc, get some foam and cut out h ...

    Re: Measure New Job
    A message posted at WOODWEB's Business and Management Forum (10/26) -- A clip board with some blank white paper, a mechanical pencil and tape measure ...

    Re: Sinker Log Process Help
    A message posted at WOODWEB's Sawing and Drying Forum (10/26) -- Sorry for the typo errors. I am having eye surgery next month to improve things. As ...

    Re: Sinker Log Process Help
    A message posted at WOODWEB's Sawing and Drying Forum (10/26) -- As you might know or suspect, logs normally float in water. So, what made your logs ...

    Re: Table legs
    A message posted at WOODWEB's Furniture Making Forum (10/26) -- Keith and rich have it right. Combine their info and you can have something worth mak ...

    Re: Is Selling And Installing Rollout Shelves A Viable Business
    A message posted at WOODWEB's Business and Management Forum (10/26) -- Pat, Its not an anomoly, its a market segment that some of us have figured out ...

    Re: pigmented waterbourne
    A message posted at WOODWEB's Finishing Forum (10/26) -- For the past 6 months I've been using SW's Kem-Aqua Plus and I am very satisfied; dries fast ...

    Re: Light Duty Shaper Comparisons
    A message posted at WOODWEB's Solid Wood Machining Forum (10/26) -- A shaper is a pretty simple machine. Couple bearings, motor and starter. There is ...

    Re: True divided Muntin bars in CNC
    A message posted at WOODWEB's CNC Forum (10/26) -- See if this video exemplifies the process in question. He doesn't do the end copes, but it would c ...

    Re: Light Duty Shaper Comparisons
    A message posted at WOODWEB's Solid Wood Machining Forum (10/26) -- Thanks Bill, I remember about 10 years ago here in California there was an auctio ...

    Re: Which turbine air gun to look at?
    A message posted at WOODWEB's Finishing Forum (10/26) -- You might consider trying one of the Accuspray 3M guns with the disposable tips. I think it' ...

    Re: Light Duty Shaper Comparisons
    A message posted at WOODWEB's Solid Wood Machining Forum (10/26) -- I see your point. Depending on how you approach it a larger shaper can be cheaper ...

    Sketchup "Skooter" extension
    A message posted at WOODWEB's CAD Forum (10/26) -- Has anyone heard of or used this extension for sketchup? It promises to go from drawing in sketchu ...

    Intake Air
    A message posted at WOODWEB's Finishing Forum (10/26) -- I would like to install an intake louver in my shop to allow the booth fan to draw in outsid ...

    pigmented waterbourne
    A message posted at WOODWEB's Finishing Forum (10/26) -- I've got an upcoming pigment job to do and have used both Target and MLC water based finishe ...

    Re: AlphaCam and open contours
    A message posted at WOODWEB's CNC Forum (10/26) -- Thanks for all the responses. I have it working for me now. I'm not sure what I was doing wrong bu ...

    Re: Table legs
    A message posted at WOODWEB's Furniture Making Forum (10/26) -- Is that for real? I just blew up the photo and I advise you to at least read up on ho ...

    Re: Is Selling And Installing Rollout Shelves A Viable Business
    A message posted at WOODWEB's Business and Management Forum (10/26) -- As far as not over 60 , it depends on your location , in my area about 50% of ...

    Re: pigmented waterbourne
    A message posted at WOODWEB's Finishing Forum (10/26) -- A quick side note. If you haven't used the new MLC Agualente Plus yet, do not expect it to a ...

    Pocket doors hardware for cabinet doors
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/26) -- What hardware is everyone using? I prefer overlay doors to match the ...

    Burned I/O modules on Holzher 1411-3 bander
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- A lightning strike burned both I/O modules. ACS industrial has deemed them "unrepai ...

    CMT solid carbide drill bit sharpening
    A message posted at WOODWEB's CNC Forum (10/26) -- We use 8mm solid carbide CMT HWM 14-6346 drill bits in our boring machine. Our normal sharpener Vo ...

    Re: Burned I/O modules on Holzher 1411-3 bander
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- We have worked with Chris at Lakeside for years. She was out; but Gordon at Pettit think ...

    Re: Light Duty Shaper Comparisons
    A message posted at WOODWEB's Solid Wood Machining Forum (10/26) -- On this auction a griggio with a feeder went for 1700. You might be in it for $25 ...

    Re: Sinker Log Process Help
    A message posted at WOODWEB's Sawing and Drying Forum (10/26) -- Dr. Gene - I am unfamiliar with the technical term you used - what does "Synk&q ...

    Re: 12 foot Teak veneer
    A message posted at WOODWEB's Architectural Woodworking Forum (10/26) -- Raw, unbacked veneer, in small quantities is available from Certainly Wood. ...

    Re: Sketchup "Skooter" extension
    A message posted at WOODWEB's CAD Forum (10/26) -- There are a couple other options but as you say, there is no perfect solution. The phlat plugin gi ...

    Re: Burned I/O modules on Holzher 1411-3 bander
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- Call Lakeside Industrial Parts Supply. Call Pettit Technical Service. Both are a long sh ...

    12 foot Teak veneer
    A message posted at WOODWEB's Architectural Woodworking Forum (10/26) -- Anyone know where we can get 12 foot long teak veneer? Oakwood goes to 10 ft ...

    Re: Is Selling And Installing Rollout Shelves A Viable Business
    A message posted at WOODWEB's Business and Management Forum (10/26) -- That would be an anomaly. What state are you located in? ...

    What species of wood is this?
    A message posted at WOODWEB's WOODnetWORK Forum (10/26) -- Does anyone know what type of wood this is? I wonder if it is hickory, locust or elm? Than ...

    Re: 12 foot Teak veneer
    A message posted at WOODWEB's Architectural Woodworking Forum (10/26) -- If you are looking for a whole flitch, you might try M. Bohlke Veneer Co. or ...

    Re: Burned I/O modules on Holzher 1411-3 bander
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- Gordon is top shelf. Good luck. ...

    Re: What species of wood is this?
    A message posted at WOODWEB's WOODnetWORK Forum (10/26) -- Looks like gray Elm to me. ...

    Re: Sinker Log Process Help
    A message posted at WOODWEB's Sawing and Drying Forum (10/26) -- sink. ( Typo.) ...

    Re: What species of wood is this?
    A message posted at WOODWEB's WOODnetWORK Forum (10/26) -- Yes its Elm ...

    Re: Slide or Panel
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- My shop is currently a two man, 2500sq/ft shop. I do all of the cut out. For processing ...

    Re: Using old wood for new projects?
    A message posted at WOODWEB's Sawing and Drying Forum (10/26) -- Yes...the insects lay eggs on the rough surface of the wood. The eggs hatch and the ...

    Re: How long do you keep customer files?
    A message posted at WOODWEB's Business and Management Forum (10/26) -- I keep paper records on average 10 years. All files on computer, generated fro ...

    Re: SW Conversion Varnish, 2K Poly over Shellac
    A message posted at WOODWEB's Finishing Forum (10/26) -- I for one wouldn't be applying a catalyzed finish over shellac. I'd put it over a vinyl seal ...

    Re: How long do you keep customer files?
    A message posted at WOODWEB's Business and Management Forum (10/26) -- There are two issues, one is what is legally required, two what do you want to ...

    SW Conversion Varnish, 2K Poly over Shellac
    A message posted at WOODWEB's Finishing Forum (10/26) -- I have been using General Finish's High Performance Poly over Shellac on coffee tables etc a ...

    Re: Slide or Panel
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- I had a SCMI slider several years ago. I have been running a Striebig vertical for the l ...

    Re: CNC Electro-Spindle Tool Sticking - HSK
    A message posted at WOODWEB's CNC Forum (10/26) -- Oh boy, it seems you guys need a little HSK101 along with HSD101. 1. Do you hear the valve trying ...

    Re: CNC Electro-Spindle Tool Sticking - HSK
    A message posted at WOODWEB's CNC Forum (10/26) -- Hi Mike McClaran, Mate - thanks so much for the info. I am not a machinist by trade but I do have ...

    nailing 1 3/8 Jatoba flooring directly to joists
    A message posted at WOODWEB's Architectural Woodworking Forum (10/26) -- building my home in the US Virgin Islands. We've milled Jatoba flooring (1 3 ...

    Re: Using old wood for new projects?
    A message posted at WOODWEB's Sawing and Drying Forum (10/26) -- For what its worth I made a king size bed for some folks a number of years ago that ...

    Re: How long do you keep customer files?
    A message posted at WOODWEB's Business and Management Forum (10/26) -- I am not advocating that anybody scan old paper documents, that would be entir ...

    Re: Should I invest in a cabinet company?
    A message posted at WOODWEB's Business and Management Forum (10/26) -- Extreme risk, at the best. Without knowing more about the company, I say " ...

    Re: How long do you keep customer files?
    A message posted at WOODWEB's Business and Management Forum (10/26) -- Cabmaker, We store lots of stuff digitally now-a-days, but 20 years ago...not ...

    Re: How long do you keep customer files?
    A message posted at WOODWEB's Business and Management Forum (10/26) -- Thanks Alan, The 7 year date is one that I've known about, and since our custo ...

    Re: Slide or Panel
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- For flat panel processing you can't beat the Striebig. You don't have to pick up the pan ...

    Re: Ritter Line Borrer
    A message posted at WOODWEB's Architectural Woodworking Forum (10/26) -- I did not know Ritter had gone out of business, but I will say this. I bough ...

    Feed speed on plywood parts (CDX)
    A message posted at WOODWEB's CNC Forum (10/26) -- I am looking for the best feed speed/bits to cut a very large quantity of CDX and HDO plywood shee ...

    Slide or Panel
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- Hello If you could buy an Altendorf Slide saw or a Striebig Panel saw which would you pr ...

    Are there anybody rember americam or visoioncam software
    A message posted at WOODWEB's CNC Forum (10/26) -- Looking to replace americam with a software silmar to it but lot new and so we runa newer operatin ...

    Re: CNC Electro-Spindle Tool Sticking - HSK
    A message posted at WOODWEB's CNC Forum (10/26) -- Likely not available in your country and if so probably very expensive. We ship to Australia all t ...

    Re: Are there anybody rember americam or visoioncam software
    A message posted at WOODWEB's CNC Forum (10/26) -- Not familar with Americam but if you are using AutoCAD to draw parts there are a number of softwar ...

    Re: How long do you keep customer files?
    A message posted at WOODWEB's Business and Management Forum (10/26) -- We were cleaning out the house and I found an old USB "A" drive (3 1 ...

    Re: 2 ply vs 10 mil?
    A message posted at WOODWEB's Veneer Forum (10/26) -- Sorry. Yes I meant 2 ply as in 2 plys of veneer. This is a completely flat vanity face - no cur ...

    Re: SW Conversion Varnish, 2K Poly over Shellac
    A message posted at WOODWEB's Finishing Forum (10/26) -- try it and let us know how that works for you - may take a year or so;. or you can use sw's ...

    Re: How long do you keep customer files?
    A message posted at WOODWEB's Business and Management Forum (10/26) -- Typically a customer will call two to 4 weeks after you have disposed of all d ...

    Re: Feed speed on plywood parts (CDX)
    A message posted at WOODWEB's CNC Forum (10/26) -- A week or so ago I was cutting poplar ply 1/2 deep at 1100 IPM with a 3 flute up-cut roughing bit. ...

    Ritter Line Borrer
    A message posted at WOODWEB's Architectural Woodworking Forum (10/26) -- I am about to purchase a Ritter line boring machine for my shop, with Ritter ...

    Re: Using old wood for new projects?
    A message posted at WOODWEB's Sawing and Drying Forum (10/26) -- I also use wood that I dried in my attic. In the summer, it is over 133 F up there, ...

    Re: How to achieve this look-Gold/silver
    A message posted at WOODWEB's Finishing Forum (10/26) -- This looks like leaf over wood or gesso. Try New York Central Art Supply http://www.nycentra ...

    Re: Slide or Panel
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- I would by the slider I think there's a lot more you can do with it so if room is a ques ...

    Re: How long do you keep customer files?
    A message posted at WOODWEB's Business and Management Forum (10/26) -- Derek, Sorry for the inappropriate response. I gather you don't store anything ...

    Re: Bandsaw Blade Re-Sharpening
    A message posted at WOODWEB's Sawing and Drying Forum (10/26) -- The Dinasaw sharpeners will sharpen any tooth profile and spacing without changing c ...

    Re: How to achieve this look-Gold/silver
    A message posted at WOODWEB's Finishing Forum (10/26) -- We do it with silver leaf and a very light glaze over the top then seal and lacquer. ...

    Re: CNC Safety Matt Option
    A message posted at WOODWEB's CNC Forum (10/26) -- At BVC we are a TapeSwitch dealer. Extremely strong and likely will last the life of the machine. ...

    Re: boss 5 x 12 cnc router
    A message posted at WOODWEB's CNC Forum (10/26) -- Maybe to import the CNC router from a reliable manufacturer in China is a good choice. ...

    Re: Slide or Panel
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- Thanks, Yes I have room for the slider. What's the opinion on safety? ...

    Re: Slide or Panel
    A message posted at WOODWEB's Cabinetmaking Forum (10/26) -- Personally I think the slider is safe also the panel saw is safe ...

    Re: Fleece back vs Kraft back on edge banding
    A message posted at WOODWEB's Veneer Forum (10/26) -- I read this before on edgemates website. I cannot comment beyond this info. sorry its kind of l ...

    Re: Life After SketchUp - which way to go?
    A message posted at WOODWEB's CAD Forum (10/26) -- Pat, this may be at odds with your apparent techno-utopianism, but the US standard of living hasn' ...

    Re: Life After SketchUp - which way to go?
    A message posted at WOODWEB's CAD Forum (10/26) -- Don, I enjoyed the Pit Stop Video but after thinking about it for a while I don't think I have eno ...

    Re: Troubles with the New Unibond 800 Formula
    A message posted at WOODWEB's Veneer Forum (10/26) -- Several problems with the new lower formaldehyde (4% to .04%) Unibond 800. Partial sheet lifts ...

    Re: dual hook heads
    A message posted at WOODWEB's Solid Wood Machining Forum (10/26) -- I went with Schmidt, It's very nice. Depending on the size of head you get some s ...

    Re: Life After SketchUp - which way to go?
    A message posted at WOODWEB's CAD Forum (10/26) -- The point is simple. Technology changes, Always bet on technology. It is the very reason that the ...

    Re: tearout issues
    A message posted at WOODWEB's Solid Wood Machining Forum (10/26) -- Also can contact Russ about Super helical heads. These are a curved style knife a ...

    Re: Life After SketchUp - which way to go?
    A message posted at WOODWEB's CAD Forum (10/26) -- While i thought the comparison was interesting, it is a zero sum game. If some of the pit crews at ...

    Re: Top Solid
    A message posted at WOODWEB's CAD Forum (10/26) -- Sorry guys, I should have been more specific. What I meant wasn't CNC output...It will create a pr ...

    Re: dual hook heads
    A message posted at WOODWEB's Solid Wood Machining Forum (10/26) -- Yes give Russ a chance for doing any drawings template and of course knives. His ...

    Re: Biesse Arrow TE059 Error
    A message posted at WOODWEB's CNC Forum (10/26) -- don't delete the tables, put a semi colon in front and this disables them. Measure all your tools ...

    Re: Any proficient Mozaik users here? I am considering it and have question
    A message posted at WOODWEB's CAD Forum (10/26) -- By the way Stephan, here is a screenshot taken from our website showing hinge locations on both th ...

    Re: Life After SketchUp - which way to go?
    A message posted at WOODWEB's CAD Forum (10/26) -- you can do anything with SU pro, you can write dynamic components, it can help you to explore your ...

    Re: tearout issues
    A message posted at WOODWEB's Solid Wood Machining Forum (10/26) -- I have attached an article I wrote that may help you have a better understanding ...

    Re: Biesse Arrow TE059 Error
    A message posted at WOODWEB's CNC Forum (10/26) -- Thanks. I'm trying to figure out the relationship between the tool database and the tool table. Th ...

    Re: Biesse Arrow TE059 Error
    A message posted at WOODWEB's CNC Forum (10/26) -- One other small issue. I have tool T1 in pocket 10. When I call for T1 (pocket 10) the magazine mo ...

    Re: Any ideas what this is?
    A message posted at WOODWEB's Furniture Making Forum (10/26) -- I have seen it before and thought it was from some mineral perhaps. ...

    Re: Any ideas what this is?
    A message posted at WOODWEB's Furniture Making Forum (10/26) -- Thanks Rich. ...

    Re: shaving mills
    A message posted at WOODWEB's Value Added Wood Processing Forum (10/26) -- We have a small Salsco mill in New England and are having a terrible time ...

    Busellato Tech
    A message posted at WOODWEB's CNC Forum (9/26/23) -- I recently purchased a 2016 Busellato 5 axis cnc at an auction in California from a company that ...

    Polyurethane and rubbing alcohol
    A message posted at WOODWEB's Finishing Forum (9/26/23) -- This table was stained with Varathane Classic wood stain, the paint is Behr Ultra semi-glo ...

    Re: Pledge/Silicone contamination
    A message posted at WOODWEB's Finishing Forum (9/26/23) -- A good way to check for contamination on your kitchen cabinet doors before spraying the fi ...

    Re: Fancier than white (melamine boards)
    A message posted at WOODWEB's Cabinetmaking Forum (9/26/23) -- There are a number of linen fabric looking products for cabinets on the market. Nothin ...

    Re: Straight cuts have an Arc.
    A message posted at WOODWEB's CNC Forum (9/26/23) -- I did have a crash where the fly cutter to surface the spoilboard got jammed in to the table, so ...

    Add more edges banding in Cabinet vision
    A message posted at WOODWEB's Architectural Woodworking Forum (9/26/23) -- Dear All, I would like to add more edges banding in Cabinet vision. It onl ...

    Re: Straight cuts have an Arc.
    A message posted at WOODWEB's CNC Forum (9/26/23) -- Could be the spindle or the plate that the spindle mounts to is a little loose. Had that problem ...

    Re: Cleaning paint room stainless steel table
    A message posted at WOODWEB's Finishing Forum (9/26/23) -- Thanks for the ideas, fellas. I'll give them a try and report back. ...

    Re: Pledge/Silicone contamination
    A message posted at WOODWEB's Finishing Forum (9/26/23) -- Sorry krud kutter ...

    Re: Door Reveals are off using cnc and edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (9/26/22) -- There are a few places to check in CV: First, make sure Cabinet Vision knows that you' ...

    Re: "Money I'll Never Get Back"
    A message posted at WOODWEB's Architectural Woodworking Forum (9/26/22) -- Machinery operators who think they're millwrights. Don't drill, cut, grind ...

    Re: Switching to Waterbase
    A message posted at WOODWEB's Finishing Forum (9/26/22) -- I have tried a number of waterbase finishes over the years but my favorite overall is Saye ...

    Digital readout for my Powermatic 66
    A message posted at WOODWEB's Cabinetmaking Forum (9/26/22) -- I have a Powermatic 66 tablesaw that I am currently using a Wixey Digital readout and ...

    Re: Digital readout for my Powermatic 66
    A message posted at WOODWEB's Cabinetmaking Forum (9/26/22) -- Go to accurate technologies website. They have the best digital guages for professiona ...

    Holzher sprint 1310 troubleshooting , help!
    A message posted at WOODWEB's Cabinetmaking Forum (9/26/22) -- I have a used Holzher sprint 1310 edgebander 1996 model and needing help getting it ru ...

    Water base primers
    A message posted at WOODWEB's Finishing Forum (9/26/22) -- Curious as to what is the favorite primer for water base finish guys. I've been using MLC& ...

    Re: Need help identifying lumber
    A message posted at WOODWEB's Sawing and Drying Forum (9/26/22) -- Catalpa. I think it also grows in Texas. I see why some day elm but it's not. Look ...

    Re: What do you use as a topcoat?
    A message posted at WOODWEB's CNC Forum (9/26/22) -- RichC No, I'm not. I just demonstrate on which machine it was made, if, of course, it is interes ...

    Re: How to zero machine coordinates on the Richauto A18
    A message posted at WOODWEB's CNC Forum (9/26/22) -- After the Home capture is triggered, when the Home capture is restarted, the capture trigger fla ...

    Re: What do you use as a topcoat?
    A message posted at WOODWEB's CNC Forum (9/26/22) -- Just thought it was peculiar to post the machine you support on a question about finishing. ...

    Re: Digital readout for my Powermatic 66
    A message posted at WOODWEB's Cabinetmaking Forum (9/26/22) -- Ty mike. Any specific model you recommend or is there only one? ...

    Re: What cutters do I need for milling beech?
    A message posted at WOODWEB's CNC Forum (9/26/22) -- @Matthew Madigan I'm glad I could help. ...

    Re: RE: Eastern Red Cedar
    A message posted at WOODWEB's Forestry Forum (9/26/22) -- Yes, of course. Its excellent siding. ...

    Re: What do you use as a topcoat?
    A message posted at WOODWEB's CNC Forum (9/26/22) -- Thank you Ian ...

    Re: Figuring out trim per LF
    A message posted at WOODWEB's Business and Management Forum (9/26/21) -- RichC. I do appreciate your input, but I would appreciate everyone involved ...

    Dustless sandpaper
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (9/26/21) -- Hi, I carry the Joest germany brand of dustless sandpaper. Thi ...

    Re: Figuring out trim per LF
    A message posted at WOODWEB's Business and Management Forum (9/26/21) -- My comments about being surprised that calculating the quote by lineal feet ...

    Re: 25" vs 37" Wide Belt Sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/26/21) -- I guess everyone has their specific purpose for having a wide belt sander, and of cour ...

    Re: Bed design help
    A message posted at WOODWEB's Furniture Making Forum (9/26/21) -- WOW! Really nice project and looks perfect! Thank you for the idea. I got a favorit ...

    Re: Figuring out trim per LF
    A message posted at WOODWEB's Business and Management Forum (9/26/21) -- Why don’t all of you who are being Karen’s on my thread, stop. If you feel t ...

    Re: table top
    A message posted at WOODWEB's Finishing Forum (9/26/21) -- It all depends on how smooth is the existing finish. Wet sand flat with 600 or 1000 sandpa ...

    Re: Figuring out trim per LF
    A message posted at WOODWEB's Business and Management Forum (9/26/21) -- This isn't junior high school Dill Weed. Why don't you identify yourself so ...

    Re: cnc
    A message posted at WOODWEB's CNC Forum (9/26/21) -- You will most likely have voltage problems as Europe and USA do not use the same ...

    Laser Projector accuracy for Parts/Pod Placement
    A message posted at WOODWEB's CNC Forum (9/26) -- I am considering purchasing an overhead Laser Projector for positionng pods and parts. We have a fl ...

    Re: Frameless boxes per day
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Very true. I should have prefaced by saying that my goal is to be the most efficient one ...

    Re: Frameless boxes per day
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- The problem is too variable to compare shops. 1st guy has a cnc, slider, good bander, and ...

    Re: Soss hinges
    A message posted at WOODWEB's Architectural Woodworking Forum (9/26) -- Jorge Lasso: Yes, you should be able to open a standard or barrel Soss hinge ...

    Re: Frameless boxes per day
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Having a somewhat larger space for that amount of machinery would probably help you much ...

    Re: Putsch edgebanders
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- I run holzher banders, Been very pleased with them That bander looks almost just like a s ...

    Soss hinges
    A message posted at WOODWEB's Architectural Woodworking Forum (9/26) -- Hi everyone, Do soss hinges work on by fold doors? ...

    Re: Soss hinges
    A message posted at WOODWEB's Architectural Woodworking Forum (9/26) -- Thank you Tony! ...

    Re: You're welcome
    A message posted at WOODWEB's Business and Management Forum (9/26) -- Pat, ""Nobody would disagree that sales are the most important activi ...

    Re: You're welcome
    A message posted at WOODWEB's Business and Management Forum (9/26) -- Pat, Investment advisors work a sliding percentage (the more you have the less ...

    Re: veneer problems
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- the google: For flat work I made a frame press that will accommodate a 4x8 sheet; I would ...

    Re: veneer problems
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- the google: Perhaps I did not state it clearly. The face that gets veneered, whether it i ...

    Re: X-Mullion Doors
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Thanks for the reply... Currently, we are not coping them. They are just a butt joint, gl ...

    Re: spraying paint on cabinet door cope and stick profiles
    A message posted at WOODWEB's Finishing Forum (9/26) -- We call it an "air trap" where the air rebounding from the corner defeats the air t ...

    Re: Making trim in a non-millwork shop....
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Long ago I started making reproduction moldings on a decent shaper, 4 wheel feed, lock ed ...

    Re: X-Mullion Doors
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- We used to make these for a cabinet shop almost every month. I made a custom sled that he ...

    Re: veneer problems
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- tony - thanks for your reply. i appreciate you sharing your approach and suggestions. my ...

    Re: Making trim in a non-millwork shop....
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- I’m with Larry, it’s hard to beat a good shaper for short runs of moulding. We have a S4S ...

    Re: You're welcome
    A message posted at WOODWEB's Business and Management Forum (9/26) -- Alan Fair enough, and I have stated mine I agree to disagree, I'm pretty sure t ...

    Re: Best adhesive for thin plastic veneer to wood picture frames
    A message posted at WOODWEB's Adhesives Forum (9/26) -- I think if it were me I would be inclined to try a spray contact adhesive. Contact adhesive a ...

    Re: Best adhesive for thin plastic veneer to wood picture frames
    A message posted at WOODWEB's Adhesives Forum (9/26) -- I agree with the spray contact as well though what the "raw wood" is may play a par ...

    Re: Making trim in a non-millwork shop....
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- I would agree with this statement. A shaper would be much more beneficial to a shop than ...

    Re: General 3hp Dual Drum Sander
    A message posted at WOODWEB's Furniture Making Forum (9/26) -- Not sure about the general but you may want to check to make sure your conveyor runs o ...

    Re: Power feeder recomendations
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Why do you want a 1 hp feeder for a router table. You can use a 1/2hp for a 3hp shaper an ...

    Re: Making trim in a non-millwork shop....
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- I'm not sure what product or service you provide but I'm thinking that there may be 100 w ...

    Re: X-Mullion Doors
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- You need a sliding shaper. Simply use a fences set at 45 degrees to the cutter head. How ...

    Re: Power feeder recomendations
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- well after deciding that bigger was just way to big i ordered the 1/4 comatic will be her ...

    Re: Best adhesive for thin plastic veneer to wood picture frames
    A message posted at WOODWEB's Adhesives Forum (9/26) -- Thank you. ...

    Re: Insert rabbeting cutter
    A message posted at WOODWEB's Architectural Woodworking Forum (9/26) -- In theory I think you're correct, the cutter body could also be milled to acc ...

    Re: Finishing bar top live edge with epoxy
    A message posted at WOODWEB's Finishing Forum (9/26) -- Regardless if you like it or not epoxy is at the very least a good starting point. I built an ...

    Re: Insert rabbeting cutter
    A message posted at WOODWEB's Architectural Woodworking Forum (9/26) -- Gerry, When a straight knife is slanted in a round cutter body, to create the ...

    Insert rabbeting cutter
    A message posted at WOODWEB's Architectural Woodworking Forum (9/26) -- We recently purchased a 2" x 4" diameter insert style rabbeting cut ...

    Re: What vacuum pump would you recommend?
    A message posted at WOODWEB's CNC Forum (9/26) -- Paul, those are good pumps. Check your Vanes, there easy to check and easy to replace if needed, yo ...

    Re: mdf finishing
    A message posted at WOODWEB's Finishing Forum (9/26) -- We struggled with this too until we switched to a 2K primer and topcoat. Much higher solids c ...

    Re: Removing Blue Tape Residue
    A message posted at WOODWEB's Finishing Forum (9/26) -- Have you (or anyone else reading) had the blue tape leave a pink discoloration on your finish ...

    Re: Spraying Waterbased Finish
    A message posted at WOODWEB's Finishing Forum (9/26) -- I spray on a daily bases about 20 gallons of Sherwin Williams Sayerlack Water base. I have an ...

    Re: Home made door clamp
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- even with the 1/4" steel + 1/8" uhmw (for easy glue clean up) the table still f ...

    conversion varnish turning soft
    A message posted at WOODWEB's Finishing Forum (9/26) -- I have been spraying CV for many years. Recently a couple of pieces have had issues. Pieces a ...

    Maggi System 32 boring clamps
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- I have a Maggi System 23 horz/very borer. Lately the boring head drills and retracts norm ...

    Re: How to achieve this look?
    A message posted at WOODWEB's Finishing Forum (9/26) -- It's a pretty standard distressed look. You can leave it roughsawn and distress it with a ham ...

    Re: Shop vac to clean shop
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Gary, the issue is principally spark combustion of all the saw dust in and around, and in ...

    Re: Finishing bar top live edge with epoxy
    A message posted at WOODWEB's Finishing Forum (9/26) -- Mirror cast would be a nightmare on the edges. It's going to run off and have runs and drips ...

    Re: Home made door clamp
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- I was going to say Izzy on youtube but its a face frame clamp not a door clamp but still ...

    How to achieve this look?
    A message posted at WOODWEB's Finishing Forum (9/26) -- I am not quite sure how to achieve this look for a customer. It looks like someone ran the wo ...

    Re: Insert rabbeting cutter
    A message posted at WOODWEB's Architectural Woodworking Forum (9/26) -- Hi Pete, Why could the body of the cutter not be milled to have the blade mov ...

    Re: Home made door clamp
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Ryan, No problem, it is not rocket science, so not that hard to figure out. I will do the ...

    Re: Spraying Waterbased Finish
    A message posted at WOODWEB's Finishing Forum (9/26) -- Hello Gary. Does the automated spray line do the boards in the pictures? Does is spray then s ...

    Re: Home made door clamp
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Take a look as some of the clever homemade clamps that the Youtuber Izzy Swan has shared. ...

    Re: Removing Blue Tape Residue
    A message posted at WOODWEB's Finishing Forum (9/26) -- Pink is usually a sign of over-catylization. I've never had the tape turn my finish pink. I u ...

    Re: How to achieve this look?
    A message posted at WOODWEB's Finishing Forum (9/26) -- The image is so dark, I can't tell at all. It just looks like they hit it with a hatchet from ...

    Sample Software
    A message posted at WOODWEB's Finishing Forum (9/26) -- Does anyone know of a software program for samples that will produce sample numbers, labels a ...

    Re: Finishing bar top live edge with epoxy
    A message posted at WOODWEB's Finishing Forum (9/26) -- That melamine shelf would be a task since the slab is natural edge. ...

    Re: PCD feed/spin speeds for mfc
    A message posted at WOODWEB's CNC Forum (9/26) -- So any update regarding this post ...

    Re: conversion varnish turning soft
    A message posted at WOODWEB's Finishing Forum (9/26) -- Not with Krystal ...

    Re: Onload/Offload
    A message posted at WOODWEB's CNC Forum (9/26) -- Thanks, Derrek, that would be really helpful! ...

    Re: Balanced tooling in insert planer heads
    A message posted at WOODWEB's Solid Wood Machining Forum (9/26) -- I'm with Bill on this one. It's the chip that is taking away the heat. Also the sh ...

    Re: Aldi Grocery Store: Benefits of standardization
    A message posted at WOODWEB's Business and Management Forum (9/26) -- Pat, You are right that government creates cronyism but this concept is prevale ...

    S2M and Label It Problem
    A message posted at WOODWEB's CAD Forum (9/26) -- Vero Software has supplied us with a package which was promised to produce real time label printing ...

    Spraying Sayerlack Hydroplus with a CATech Bobcat
    A message posted at WOODWEB's Finishing Forum (9/26) -- We're starting to use this product and really like it. However, we're having a little trouble ...

    Re: Best spray equipment for waterborne.
    A message posted at WOODWEB's Finishing Forum (9/26) -- FWIW - We spray just water based stuff & reasonable quantity (several hundred gallons a y ...

    Re: Can't get separation between wet and dry bulbs...
    A message posted at WOODWEB's Sawing and Drying Forum (9/26) -- You should not let an L53 run over 120F wet bulb and you should avoid running it over ...

    Re: Safety Manuals
    A message posted at WOODWEB's Business and Management Forum (9/26) -- Your safety meetings might be more interesting and effective if the group made ...

    Edging High gloss doors
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- I will need suggestion for edge banding high gloss doors. I don’t know what corner radius ...

    Plastic Laminate Glues
    A message posted at WOODWEB's Adhesives Forum (9/26) -- I want to laminate 30 sheets of plywood for countertops. I've used a stack of melamine as a c ...

    Re: Aldi Grocery Store: Benefits of standardization
    A message posted at WOODWEB's Business and Management Forum (9/26) -- Some compromise may be useful on healthcare. But to compromise on federalism is ...

    Re: Countertop finish
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- The story apparently is that all finishes are food safe once cured. The two basic camps a ...

    Re: What’s the deal with the deep refrigerators these days?
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- I've done a stud pocket for those fat-assed fridges on occasion, and gain another 3.5&quo ...

    Re: DNC Mode on SCM Pratix N
    A message posted at WOODWEB's CNC Forum (9/26) -- Thanks. We thought about that, but wanted to run the entire program for part accuracy. Turns out th ...

    Re: Aldi Grocery Store: Benefits of standardization
    A message posted at WOODWEB's Business and Management Forum (9/26) -- The problem is that centralized government creates more power and more cronyism ...

    Re: S2M and Label It Problem
    A message posted at WOODWEB's CAD Forum (9/26) -- To Greg who sent me this via email: Hello, I work for Cabinet Vision. What is your company name and ...

    Re: Plastic Laminate Glues
    A message posted at WOODWEB's Adhesives Forum (9/26) -- My first suggestion would be to use a different substrate for gluing the laminate to. Plywood ...

    Re: Countertop finish
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Chemcrafts Verde 2k poly is good and it’s not a thick build, resembles an oil finish. Moh ...

    Re: Safety Manuals
    A message posted at WOODWEB's Business and Management Forum (9/26) -- I love that guy, but I never thought of him and safety in the same thought. Be ...

    Finishing wood bar top
    A message posted at WOODWEB's Finishing Forum (9/26) -- I have a customer in Southern Calif. that is having a Black Walnut bar top made and needs a d ...

    Re: Plastic Laminate Glues
    A message posted at WOODWEB's Adhesives Forum (9/26) -- Yes I'd much prefer to use mdf, or particle board but the Architect is specing Marine Grade P ...

    Re: Spraying Sayerlack Hydroplus with a CATech Bobcat
    A message posted at WOODWEB's Finishing Forum (9/26) -- Clogging at the tip like buildup? or clogging in the pump? Gotta be more specific. ...

    Re: DNC Mode on SCM Pratix N
    A message posted at WOODWEB's CNC Forum (9/26) -- Can you break up the program into sections? I know that Sheetcam has a drip feed function. Never us ...

    Re: CNC routing services near Woodland Hills CA
    A message posted at WOODWEB's Furniture Making Forum (9/26) -- Thanks Luke, do you have a shop I can visit? ...

    Re: Countertop finish
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- So you suggesting oil which would be best and food safe?? ...

    Re: CNC routing services near Woodland Hills CA
    A message posted at WOODWEB's Furniture Making Forum (9/26) -- Yes - just sent you a message. ...

    Re: spraying white
    A message posted at WOODWEB's Finishing Forum (9/26) -- Mike what do you mean by 15 minute sweat it? thanks.......nicko ...

    Re: Plastic Laminate Glues
    A message posted at WOODWEB's Adhesives Forum (9/26) -- I've always had good luck with Titebond cold press HPL ...

    Re: Plastic Laminate Glues
    A message posted at WOODWEB's Adhesives Forum (9/26) -- Yes titebond cold press or titebond original. ...

    Re: Plastic Laminate Glues
    A message posted at WOODWEB's Adhesives Forum (9/26) -- Thanks I'll check it out. ...

    Re: Finishing wood bar top
    A message posted at WOODWEB's Finishing Forum (9/26) -- 2K Poly or Polyester. ...

    Re: DNC Mode on SCM Pratix N
    A message posted at WOODWEB's CNC Forum (9/26) -- Glad to hear it worked out. ...

    Re: Finishing wood bar top
    A message posted at WOODWEB's Finishing Forum (9/26) -- Agreed. ...

    Re: Time Per 3/4 ply sheet on CNC
    A message posted at WOODWEB's CNC Forum (9/26) -- Mike, I am curious what kind of spoil board material you are using. I only ask because I know that ...

    Spraying assembled drawers
    A message posted at WOODWEB's Finishing Forum (9/26) -- Hi there- wondering about some tips in spraying drawers that are assembled. I used to spray t ...

    Re: Trying to solve a problem
    A message posted at WOODWEB's Finishing Forum (9/26) -- They do, but it will not perform to your standards in regards to dry times ect... What part o ...

    Re: Trying to solve a problem
    A message posted at WOODWEB's Finishing Forum (9/26) -- I too use wurth louis and co. The MLC stuff is not great. Chemcraft waterbased products are g ...

    Re: Magnetic Door Switch for microwave cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- I cant imagine the liability of modifying a customer purchased UL listed appliance. The l ...

    Upholstered curved chair backs
    A message posted at WOODWEB's Furniture Making Forum (9/26) -- We are looking at making some arm and side chairs that have an upholstered seat and ba ...

    Re: Spraying assembled drawers
    A message posted at WOODWEB's Finishing Forum (9/26) -- The idea of taking the bottom out would sure help keep the gun and my face much cleaner. Neve ...

    Re: Trying to solve a problem
    A message posted at WOODWEB's Finishing Forum (9/26) -- Yes they do have GF but it's the retail/diy stuff Not professional GF won't let Woodcraft sel ...

    Re: Edge Joint Machine
    A message posted at WOODWEB's Solid Wood Machining Forum (9/26) -- I current use 16" Jointer to joint the edge before jointing 9-10 pieces of 7' ...

    Re: Blum aventos bi fold doors for upper cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Al, you do need to allow for the right clearance. Ask your sales rep for a blum Aventos b ...

    Re: Spraying assembled drawers
    A message posted at WOODWEB's Finishing Forum (9/26) -- When i make drawers i cut the back short of the groove so i can slide the bottom in and nail ...

    Re: Spraying assembled drawers
    A message posted at WOODWEB's Finishing Forum (9/26) -- Aren't you using an HVLP gun? Why all the bounce back? Turn the air and the fluid down if you ...

    Re: Magnetic Door Switch for microwave cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Remove cover from microwave, locate the door switch that turns off the microwave when it' ...

    Re: Cabnetware to Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/26) -- To go over to the dark side ? I face the same delema.....S2M ? If you can could figure out if I cou ...

    Re: How Can This Be?
    A message posted at WOODWEB's Architectural Woodworking Forum (9/26) -- I will do a test panel or two this week. The current thought is a 1/4" c ...

    Re: Wood Species and Supply
    A message posted at WOODWEB's Architectural Woodworking Forum (9/26) -- it's hard to say exactly but to me it looks like what we call Blue Pine , whi ...

    Cut Small Triangles on Production Basis
    A message posted at WOODWEB's Solid Wood Machining Forum (9/26) -- Hi there! I am looking for ways to cut small white oak triangles that will be used ...

    Tracking Employee Production
    A message posted at WOODWEB's Business and Management Forum (9/26) -- We have a mid sized Custom Cabinet Shop with 45 employee's our main product is ...

    Re: Trying to solve a problem
    A message posted at WOODWEB's Finishing Forum (9/26) -- Well forget GF My nearby Woodcraft does not sell the professional stuff And I'm not playing t ...

    Re: Makita 2012NB Adjust Plate
    A message posted at WOODWEB's Solid Wood Machining Forum (9/26) -- no more adjust plate for 2012NB. you need to order special set plate and screws fr ...

    Re: Drying black locust
    A message posted at WOODWEB's Sawing and Drying Forum (9/26) -- I've had some locust honey before and I say it is my third favorite, after sourwood a ...

    Wood Species and Supply
    A message posted at WOODWEB's Architectural Woodworking Forum (9/26) -- I am looking for help identifying the wood species in the attached photo. Als ...

    Re: machine repair person
    A message posted at WOODWEB's Solid Wood Machining Forum (9/26) -- Not sure how close they are to you, but these guys are excellent. They have worked ...

    Re: Edge Joint Machine
    A message posted at WOODWEB's Solid Wood Machining Forum (9/26) -- What info are you looking for? How they compare in quality of cut? Production rate ...

    Edge Joint Machine
    A message posted at WOODWEB's Solid Wood Machining Forum (9/26) -- Jointer, Straight rip line, Anyone please list down all the edge joint machine ava ...

    Re: Magnetic Door Switch for microwave cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Forget the above, It would keep the light on in the microwave. Sorry ...

    Re: bed out of the ceiling
    A message posted at WOODWEB's Business and Management Forum (9/26) -- The link to those retracting beds is pretty rad... I never even knew! Lol ...

    Re: Cabnetware to Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/26) -- Paul, does this offer expire September 30th? ...

    Re: Cabnetware to Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/26) -- Yes, That's what it said ...

    Re: Pay parity with other trades?
    A message posted at WOODWEB's Business and Management Forum (9/26) -- Gary Which industries? Trade and offshoring are not a bad thing. It is just tha ...

    Re: Staining maple
    A message posted at WOODWEB's Finishing Forum (9/26) -- I realize that you have likely already solved this issue but thought I'd give you a couple ti ...

    Re: Breaking into Design
    A message posted at WOODWEB's CAD Forum (9/26) -- I spent 30 years in the industry. From student, to benchmans helper, machinest, installer, finisher ...

    Tannin Reactive Staining Methods
    A message posted at WOODWEB's Finishing Forum (9/26) -- Hello. New guy here. Although, I have spent countless hours reading various threads.. Not sur ...

    Re: Mirka Deros vs. Ceros random orbit sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Door shop guy- What "bugs" did you think the sander had? I know after 2 1/2 yea ...

    Re: Pay parity with other trades?
    A message posted at WOODWEB's Business and Management Forum (9/26) -- This is getting far from my original question which is why our trade is paid le ...

    Re: Mirka Deros vs. Ceros random orbit sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Hi Leo It is an excellent sander...my favorite for sure besides my Dynabrades. Mine would ...

    Re: Engineering Club
    A message posted at WOODWEB's CAD Forum (9/26) -- This is right in line with something I have been organizing myself .... would love to join in or pa ...

    Re: How much deposit
    A message posted at WOODWEB's Business and Management Forum (9/26) -- Commercial is not zero, if you are not getting a deposit then we must be doing ...

    Re: Mirka Deros vs. Ceros random orbit sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Never had mine overheat. It never stalled or stopped. Only time I had a problem is when t ...

    Re: Wide Band Mill
    A message posted at WOODWEB's Sawing and Drying Forum (9/26) -- I have experience from log band saws with blade with of 27 mm up to 40 mm, we mostly ...

    Re: Mirka Deros vs. Ceros random orbit sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- I bought the 5" duros. It quit after 30 minutes, something with the electronic switc ...

    Re: Mirka Deros vs. Ceros random orbit sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Like most things, you usually hear the most from those who have had issues. Guys like me ...

    Re: Wide Band Mill
    A message posted at WOODWEB's Sawing and Drying Forum (9/26) -- Thanks Per-Olov on the blades. 1.5" blades seems like the standard for these. We ...

    Finish Products & Techniques
    A message posted at WOODWEB's Finishing Forum (9/26) -- I've recently taken on some small batch production work making wood plaques, trophy stands, s ...

    Re: Mirka Deros vs. Ceros random orbit sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- I sure hope Mirka finally has all the bugs worked out with the ceros. I went thru 3 of th ...

    Re: 0ak cabinet refinishing job
    A message posted at WOODWEB's Finishing Forum (9/26) -- I wipe the MOS twice with a clean sponge and have never had adhesion problems. Of course, I n ...

    Re: Mirka Deros vs. Ceros random orbit sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- I have the Ceros. Great sander when it ran. First, as with others the board went out. The ...

    Re: Wide Band Mill
    A message posted at WOODWEB's Sawing and Drying Forum (9/26) -- I built a light wide band mill. I'm using an 1 1/2'' blade in the video below.It was ...

    Re: Mirka Deros vs. Ceros random orbit sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Dust Collection......We swap out the pad that it comes with for some fancy thing that has ...

    Re: Mirka Deros vs. Ceros random orbit sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- I'd really like to have one of these sanders but I'm a little hesitant because of all of ...

    Re: Bookcase design software
    A message posted at WOODWEB's CAD Forum (9/26) -- Second on the Ecabs/Sketchup combo. I was on ECabs for years, and then moved to Mosaic to work with ...

    Wide Band Mill
    A message posted at WOODWEB's Sawing and Drying Forum (9/26) -- Has anyone had experience with a light, wide-band mill like the Hudson Oscar 52" ...

    Re: Bookcase design software
    A message posted at WOODWEB's CAD Forum (9/26) -- I use eCabinets. It is free and is a very robust program that rivals programs costing 20K. It does ...

    Re: Pay parity with other trades?
    A message posted at WOODWEB's Business and Management Forum (9/26) -- I got my journeyman carpenter card in the late 70s. IMO what I'm talking about ...

    Re: Finish Products & Techniques
    A message posted at WOODWEB's Finishing Forum (9/26) -- This is why nobody else is doing it. Small items have a high cost to finish and without the r ...

    Re: Pay parity with other trades?
    A message posted at WOODWEB's Business and Management Forum (9/26) -- Pat, I follow Mike Rowe, he was recently on a podcast I frequent. Most of the j ...

    Re: Bookcase design software
    A message posted at WOODWEB's CAD Forum (9/26) -- Thank you JM and Karl for your great input concerning eCabinets. With support like this and somethi ...

    Re: Wall panel installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/26) -- Photos of Wall installation,, this was a community center without maj ...

    fan reversals
    A message posted at WOODWEB's Sawing and Drying Forum (9/26) -- We have our kiln fans set to reverse every 2 hours. i was considering lowering the re ...

    Re: 0ak cabinet refinishing job
    A message posted at WOODWEB's Finishing Forum (9/26) -- Maybe consider trying Rubio Monocoat. It's a hard wax oil that goes on with one application. ...

    Re: Mirka Deros vs. Ceros random orbit sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Anyone do the math on power cost to run a Dynabrade vs a high end electric? Seems like RO ...

    Re: Wall panel installation
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/26) -- This install went really well and now the guys are using these things ...

    Re: Mirka Deros vs. Ceros random orbit sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- My buddy has a Fein vacuum with the auto on for an air sander. Not sure if it came that w ...

    Re: Using auto feeder on jointer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (9/26) -- One of the best thing I have consider. Flattening one side of rough stoc ...

    Re: Bookcase design software
    A message posted at WOODWEB's CAD Forum (9/26) -- Thank you Scott for the information. I will definitely look into it and let you know how I make out ...

    Re: How much deposit
    A message posted at WOODWEB's Business and Management Forum (9/26) -- Paul you are conflating all commercial work together, you can't do that as it j ...

    Re: Bracket Feet
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- Wouldn't the pull out ride above the feet similar to were the doors are now? If not make ...

    biesse rover 15
    A message posted at WOODWEB's CNC Forum (9/26) -- Is anyone using bobcad cam v26 software on a nc 410 controller. If so how does it work? ...

    Re: Bookcase design software
    A message posted at WOODWEB's CAD Forum (9/26) -- Michael, Here is a link to a gallery of eCabinet Systems Designs ...

    Re: Mirka Deros vs. Ceros random orbit sander
    A message posted at WOODWEB's Cabinetmaking Forum (9/26) -- No compressor required ...

    Re: Bookcase design software
    A message posted at WOODWEB's CAD Forum (9/26) -- take a look at cabinet planner as well. ...

    Re: Barcode scanner issues
    A message posted at WOODWEB's CNC Forum (9/26) -- Thom, In the C:\evol\bin folder is a file called tpa.ini. Make a copy of the file in case you need ...

    Re: Morbidelli CNC Nested base router - Buy or not Buy?
    A message posted at WOODWEB's CNC Forum (9/26) -- i would be careful in trusting anyone on these boards. You need to make the decision for yourself. ...

    What species of wood veneer is this?
    A message posted at WOODWEB's Veneer Forum (9/26) -- Hey everyone. I am trying to find this exact veneer. I believe it is quartered Ebony but I could ...

    Re: Tool Compensation
    A message posted at WOODWEB's CNC Forum (9/26) -- This may help - each have advantages and all are application/process specific. People machining pla ...

    Floating cabinets in steel stud walls
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/26) -- I typically install in high-end residential projects, and was just as ...

    Blow out dust bags
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (9/26) -- I have a 2 bag powermatic dust bag collection in my shop it's onl ...

    Re: slide saws
    A message posted at WOODWEB's Solid Wood Machining Forum (9/26) -- I was told the f45's carriage will have some side to side play when fully extended ...

    Re: 2 pc MDF doors in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/26) -- I am a bit confused. Everyone seems to suggest CV can handle the job. Why not just get up to date w ...

    Re: 2 pc MDF doors in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/26) -- I believe Panelmetrix 7 is the latest Version, not sure what build. But keep in mind Panelmetrix is ...

    Re: Tool Compensation
    A message posted at WOODWEB's CNC Forum (9/26) -- Chris, do you mean I should program the tool's sharpened (new) diameter in Alphacam too? Or keep th ...

    Re: 2 pc MDF doors in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/26) -- Bob What's the deal ??? I have the MDF door maker from plaint and can make almost anything with the ...

    Re: 2 pc MDF doors in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/26) -- Paul I trying to make 2 pc MDF Doors with separate frame and panels. Any idea how to do that ? ...

    Re: What species of wood veneer is this?
    A message posted at WOODWEB's Veneer Forum (9/26) -- Definitely reconstituted veneer, but I couldn't quickly find one to match. ...

    Re: 2 pc MDF doors in Cabinet Vision
    A message posted at WOODWEB's CAD Forum (9/26) -- I have Omnitech seelex pal cnc ...

    Re: Torsion Box Floating Shelves into Side of Kitchen Cabinets?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (9/26) -- Melanie, use 10" L-brackets. One leg would be screwed to the ins ...

    Re: conference table questions
    A message posted at WOODWEB's Veneer Forum (9/26) -- good points. My major issue is a tight delivery timeframe. Right now I don't have the extra time ...

    What glue to use for laminated utensils
    A message posted at WOODWEB's Adhesives Forum (9/26) -- I'm making laminated utensils used for cooking. What type of glue can be safe and hold up to ...

    Re: Round Veneer Flush Trimmer
    A message posted at WOODWEB's Veneer Forum (9/26) -- My first thought was Pinske, but I don't see it on their website. ...

    spanish cedar vs sapele mahogony
    A message posted at WOODWEB's WOODnetWORK Forum (9/26) -- Im doing a project that requires Spanish Cedar. I have worked with this type of wood in the ...

    Re: Fumigating Recycled barn wood
    A message posted at WOODWEB's Value Added Wood Processing Forum (9/26) -- Rand... Do you test for lead.....I would assume that kiln heating does noth ...

    Re: Fumigating Recycled barn wood
    A message posted at WOODWEB's Value Added Wood Processing Forum (9/26) -- We specialize in making furniture accented with antique barnboard. You will ...

    Re: Interior door construction question
    A message posted at WOODWEB's Architectural Woodworking Forum (8/26/23) -- There are some door gurus on here that can give you a good answer. One eve ...

    Re: Two-phase and three-phase motors in a machine, what are they?
    A message posted at WOODWEB's CNC Forum (8/26/22) -- My first reaction was to echo LeoG and say there is no such thing as a two-phase motor. People o ...

    Re: Drill for Hinges on CNC / Edgebander
    A message posted at WOODWEB's CNC Forum (8/26/22) -- Each trimmer usually has a large copy wheel that rides on the panel and you adjust trimmer to it ...

    Re: Rising prices
    A message posted at WOODWEB's Business and Management Forum (8/26/22) -- The countertop guys are the last one in on a job. Most jobs are at deadline ...

    Re: Rising prices
    A message posted at WOODWEB's Business and Management Forum (8/26/22) -- I'm curious, what's the story with countertops shops? I have recently used s ...

    Re: Drill for Hinges on CNC / Edgebander
    A message posted at WOODWEB's CNC Forum (8/26/22) -- We had this issue previously. We cut mdf plugs that fit in hinge hole to keep copy wheel running ...

    Re: Drill for Hinges on CNC / Edgebander
    A message posted at WOODWEB's CNC Forum (8/26/22) -- Something new everyday. I have 4 CNC,s 2 of them Biesse, and have no idea what a nesting shoe is ...

    Re: Glue Rotation
    A message posted at WOODWEB's Adhesives Forum (8/26/22) -- 1 RPM motor to spin the jug. Just make a holder that spins on a bearing and a wheel to con ...

    Re: Two-phase and three-phase motors in a machine, what are they?
    A message posted at WOODWEB's CNC Forum (8/26/22) -- I've heard of split phase motors myself ...

    Kremlin vs ca tech.
    A message posted at WOODWEB's Finishing Forum (8/26/22) -- What’s the preference for spraying 2k poly? Pros and cons? Opinions? ...

    Re: Kremlin vs ca tech.
    A message posted at WOODWEB's Finishing Forum (8/26/22) -- Kremlin for me.... I don't have a CA Tech pump. ...

    Re: Drill for Hinges on CNC / Edgebander
    A message posted at WOODWEB's CNC Forum (8/26/22) -- Thanks. ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/26/21) -- OP here... First off - apologies to those that think is isn't suitable for this forum. ...

    Re: Building Shutters / Cutting Louvers
    A message posted at WOODWEB's Architectural Woodworking Forum (8/26/21) -- Oh - Movable slat shutters! That is something else. The better movable sla ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/26/21) -- I will say this the pictures of the kitchen and the pictures of the drawers don't matc ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/26/21) -- As some of the others have posted, we have all miss-drilled drawer boxes, we've all ex ...

    Re: Building Shutters / Cutting Louvers
    A message posted at WOODWEB's Architectural Woodworking Forum (8/26/21) -- Thanks for your responses. Just to be clear, (not that it makes a differen ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/26/21) -- Greetings Zach,I think a bit of touch up work will clear up your complaints. I cant he ...

    Holzher edgebander troubleshooting
    A message posted at WOODWEB's Cabinetmaking Forum (8/26/21) -- We own a well used Holzher 1437 edgebander that has work perfectly until recently. The ...

    Re: some sort of flexible sander???
    A message posted at WOODWEB's Cabinetmaking Forum (8/26/21) -- thanks everyone. i forgot about the surfprep. we have the 4" rectangular sander w ...

    Re: some sort of flexible sander???
    A message posted at WOODWEB's Cabinetmaking Forum (8/26/21) -- Like Karla mentioned, you need a sander with a thick flexible pad, the best one on the ...

    Re: Building Shutters / Cutting Louvers
    A message posted at WOODWEB's Architectural Woodworking Forum (8/26/21) -- Try this place for machinery. I just went to Google, but looks like these ...

    Re: Is this acceptable quality for a custom kitchen install???
    A message posted at WOODWEB's Cabinetmaking Forum (8/26/21) -- On frame and panel drawer faces I started fastening the box to the face under the bott ...

    Re: Modular table
    A message posted at WOODWEB's Architectural Woodworking Forum (8/26/21) -- All it takes is a tap on the wedge if the joint loosens. ...

    Re: some sort of flexible sander???
    A message posted at WOODWEB's Cabinetmaking Forum (8/26/21) -- Look at 3:59 in this video ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- I will start off by saying I am a firm believer of chasing your dreams . I wish ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Adam, I am a small shop compared to most, and I would simply warn you not to se ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- I am in AZ we have no union cabinet shops, it's a right to work state. My wife ...

    Re: Free Webinar, 8/26/2020 Drying oak And Maple
    A message posted at WOODWEB's Sawing and Drying Forum (8/26) -- Gene, and others, I will not be able to attend the Webinar due to work, but have the ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- ditto the other negative comments. i'm 12 years in and don't think i would do a ...

    Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Hello new here, I have read many discussions on both business and CNC parts of ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- I'd have been a lot more positive if you had CNC and software experience. When ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- the google.... The social media star thing is dead and dying as well. All the o ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Scott: "I would figure out how many sheets of plywood you need, How much e ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Gee, seems like the perfect time to quit a union paying job with benefits and o ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Rich i understand where you are coming from in most respects other than the mon ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Adam, Okay, so I come across as grouchy old fart that doesn't give out hugs to ...

    How do you guys do a back bevel finger pull
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- This keeps coming up. Paint grade is no problem but stain grade is. Id like the process t ...

    Re: SCMI 24" WIN CS 63 Widebelt Tracking - Pneumatic to Electric Eye Conver
    A message posted at WOODWEB's Solid Wood Machining Forum (8/26) -- I did this same conversion on a large double belt sander many years ago (Mid 80's) ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- We are booked out 6 months so I know the work is out there but there's no way I ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Ryan's post is spot on. Spend your money on the stuff to do the pool table and ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Give me a call. We are a 38 year old custom furniture manufacturer and make ple ...

    Solid ebony glue ups
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- I need to build a vanity top to look like a surf board. I am mixing wider 8/4 sapele a ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- So after scotts detailed response it really opened my eyes and was info i despe ...

    Covering yellow poly on oak walls
    A message posted at WOODWEB's Finishing Forum (8/26) -- I have a customer with solid oak paneling on their walls. It has a light gray stain with 20+ ...

    attaching removable desk to cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- I'm trying to determine some good options to attach a removable solid wood desk top to ne ...

    Re: Omnitech-Selexx Pal- Locating Pins not coming up
    A message posted at WOODWEB's CNC Forum (8/26) -- Thanks Pat. In the end we were able to get it resolved. Turns out that we had to move the Z axis Do ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- these last 2 responses are exactly what ive been looking for, excellent ideas. ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- startup i have bout 60k without cards, air dust collection I have, no forklift ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Adam, Check out Cabinet Notch, they are a component manufacture. I believe they ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Adam, The easiest way to get going would be building frameless cabinets out of ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Cranky old bastard. :-) Cabinet shops are not the biz to be in if you enjoy fin ...

    Re: Covering yellow poly on oak walls
    A message posted at WOODWEB's Finishing Forum (8/26) -- Thinned white acrylic paint will stick to the poly. The bad thing is it dries very quickly, s ...

    Re: attaching removable desk to cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- Pretty much depends on what you want the shelving unit to look like when the desk is take ...

    Omnitech-Selexx Pal- Locating Pins not coming up
    A message posted at WOODWEB's CNC Forum (8/26) -- Hello All, I am having trouble with am Omnitech. The locating pins are no longer popping up. We rec ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- I think if your pool table buddy was serious about his custom made pool tables ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Mark thank you very much for your thourough input that means alot and definitel ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- thanks bob, yes i definitely would like to be doing those cheaper cabs but a de ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Mark B, Thanks for clarifying that pricing information, that is so very true. M ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Scott this response is by far and away what i have been looking for very detail ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- to be clear the 60k is after the cnc and dust collection and other stuff that I ...

    Re: Solid ebony glue ups
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- I haven't found Ebony gluing to be difficult. Have had no problems gluing Ebony guitar ...

    Re: attaching removable desk to cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- What will the owner do with the desk when pulled out of the way? It might be more useful ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- my first response was directed at rich since the others came in as I was writin ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- why would i want to look into door and drawer suppliers though if they can all ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Rich, you left out all the other fun stuff! Power,air,dust collection, maybe a ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Absolutely , time is money... As a 1 men shop anything you can outsource will h ...

    Re: And its about to get much worse
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Anything else? There's a day when the last door doesn't open. ...

    Re: Free Webinar, 8/26/2020 Drying oak And Maple
    A message posted at WOODWEB's Sawing and Drying Forum (8/26) -- The NHLA does record and distribute the Webinar ...

    Re: Omnitech-Selexx Pal- Locating Pins not coming up
    A message posted at WOODWEB's CNC Forum (8/26) -- I would check the incoming air on the piston is not clogged ...

    Re: attaching removable desk to cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- Maybe a table leaf latch similar to this? ...

    Re: And its about to get much worse
    A message posted at WOODWEB's Business and Management Forum (8/26) -- That last door is on the crematorium. ...

    Re: Starting cnc cabinet business
    A message posted at WOODWEB's Business and Management Forum (8/26) -- How much start up capital do you have? ...

    Re: Dye Color Before black
    A message posted at WOODWEB's Finishing Forum (8/26) -- Are you looking for something like this? ...

    Re: Source to outsource shop drawings
    A message posted at WOODWEB's CAD Forum (8/26) -- genius. Thanks ...

    Re: Source to outsource shop drawings
    A message posted at WOODWEB's CAD Forum (8/26) -- Try Google ...

    Re: Shop layout help
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- I see you intend to use the slider to cut your lumber. I suspect you will soon tire of th ...

    Re: chairs
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- There is no need to resort to a reinvention of the wheel, er dining table and chair, f ...

    Re: salary for manager/installer
    A message posted at WOODWEB's Business and Management Forum (8/26) -- I may well be wrong, and a lot of us in the self employed world even with the a ...

    Re: really high-end finishes for commercial fixtures/surfaces
    A message posted at WOODWEB's Finishing Forum (8/26) -- For those characteristics, the only thing i can think of off the top of my head would be poly ...

    Re: Sticky wood finish
    A message posted at WOODWEB's Finishing Forum (8/26) -- Agreed with the above. Personally I'd clean them off like they said, using a solvent. Naptha ...

    Re: Small/Open End Wide Belt Sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- One consideration often overlooked is belt length. The longer the belt, the better the he ...

    Re: vinyl sealer with CV
    A message posted at WOODWEB's Finishing Forum (8/26) -- If you are wanting a product specifically to fill the pores on wood, then vinyl sealer isn't ...

    Re: Shop layout help
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- You are right, I don’t have a jointer. Currently my supplier runs lumber for me with 1 jo ...

    Re: Organizing/Labeling Job Materials
    A message posted at WOODWEB's Business and Management Forum (8/26) -- We have one person in charge of ordering & receiving. Panels that are order ...

    Re: Selling to design/install shops
    A message posted at WOODWEB's Business and Management Forum (8/26) -- One place that we have long sold to adds 25% for the sale only, no design, inst ...

    Re: salary for manager/installer
    A message posted at WOODWEB's Business and Management Forum (8/26) -- I would be surprised if he would come to work with you. He is independent for a ...

    really high-end finishes for commercial fixtures/surfaces
    A message posted at WOODWEB's Finishing Forum (8/26) -- i'm curious to learn what i don't know. we spray a 2k poly now and i understand it to be one ...

    Re: really high-end finishes for commercial fixtures/surfaces
    A message posted at WOODWEB's Finishing Forum (8/26) -- danny - understood. i'm not looking to be able to provide the volume for a custom product, bu ...

    Re: Considering Taking Doors / Drawers In House
    A message posted at WOODWEB's Business and Management Forum (8/26) -- I think in your market you will be much better off buying boxes and doors. If y ...

    Re: Red cloud coming thru grey paint
    A message posted at WOODWEB's Finishing Forum (8/26) -- Rich is correct, that is a symptom of over-catalyzation but that doesn't make it a sure bet. ...

    Need Parts For Hinge Boring Machine
    A message posted at WOODWEB's Solid Wood Machining Forum (8/26) -- Hi, I've got an older model European hinge boring and insertion machine. It was ma ...

    Re: Shop layout help
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- No joiner? How do you get solids flat? Our process is: rough length, rough width, face an ...

    Re: Small/Open End Wide Belt Sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- I found a 37” Speedsaver for $4000 within driving distance. I think it’s a much better ch ...

    Re: PEX for air lines
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- Different Larry, If you use Pex you need to take into consideration the restrictions caus ...

    Re: Options for drilling
    A message posted at WOODWEB's CNC Forum (8/26) -- If you are only boring holes in panels that are already sized, go with the point to point style mac ...

    Re: Small/Open End Wide Belt Sanders
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- The Speedsander will serve you much better than the open arm. Widebelt sanders are very s ...

    Re: Options for drilling
    A message posted at WOODWEB's CNC Forum (8/26) -- If it's many many sheets I would find an old light duty cnc or a cheap Chinese one and add some pne ...

    Re: really high-end finishes for commercial fixtures/surfaces
    A message posted at WOODWEB's Finishing Forum (8/26) -- What are the characteristics you are looking for? For most things people look for in polyuret ...

    Re: really high-end finishes for commercial fixtures/surfaces
    A message posted at WOODWEB's Finishing Forum (8/26) -- danny - scratch-resistancy and/or ease of repair. also, coating needs to be thin enough to ma ...

    Options for drilling
    A message posted at WOODWEB's CNC Forum (8/26) -- We are looking for options to drill rows of holes in 4' X 8' X 3/4" panels. This will be the s ...

    Re: Red cloud coming thru grey paint
    A message posted at WOODWEB's Finishing Forum (8/26) -- Thanks for the responses, I suggested that they have the painter sand, prime and finish, but ...

    Re: Slow Exit To Retirement
    A message posted at WOODWEB's Business and Management Forum (8/26) -- We check with BL and state DOE and ask a local staffing agency that finds us em ...

    Re: Hertz Air Compressors?
    A message posted at WOODWEB's CNC Forum (8/26) -- They seem to have just started pushing their US operation (AFAICT) Compressorworld now started carr ...

    Re: salary for manager/installer
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Have a few long talks with him before you commit. Try to determine attitude. Th ...

    Re: choosing between SCM and Stiles
    A message posted at WOODWEB's Business and Management Forum (8/26) -- My personal limited experience has been that SCM has been good. Schelling & ...

    Re: salary for manager/installer
    A message posted at WOODWEB's Business and Management Forum (8/26) -- I was going to mention what Paul is saying. If nothing else look at getting an ...

    Re: Slow Exit To Retirement
    A message posted at WOODWEB's Business and Management Forum (8/26) -- We pay about $32 in NE. S CA seems like it should be considerably more (to put ...

    Re: Options for drilling
    A message posted at WOODWEB's CNC Forum (8/26) -- Dropout - many times. Probably 1-1/2 - 3" spacing. Thanks! ...

    Re: Options for drilling
    A message posted at WOODWEB's CNC Forum (8/26) -- Once or many times? Hole spacing? ...

    Re: How long to heat to sterilize wood
    A message posted at WOODWEB's Sawing and Drying Forum (8/26) -- Thanks for the advice. I believe the wood is finally sterilized. I kept it over 150 f ...

    Re: Teak dining table refinishing
    A message posted at WOODWEB's Finishing Forum (8/26) -- Thx sir. I’m looking to ensure the Isolante from Milesi will work for putting a 2K over the T ...

    Re: Push off & clean effectiveness?
    A message posted at WOODWEB's CNC Forum (8/26) -- Derreck, That solution to not having a CNC sweep is simple genius. Thank you so much. Two regret i ...

    Re: Teak dining table refinishing
    A message posted at WOODWEB's Finishing Forum (8/26) -- I am not familiar with the Milesi product but the Chemcraft acts as both the tie-coat and sea ...

    Re: Teak dining table refinishing
    A message posted at WOODWEB's Finishing Forum (8/26) -- Talk to the product tech rep and see what they say. We do tons of teak and do a 2k PU simulat ...

    Re: Teak dining table refinishing
    A message posted at WOODWEB's Finishing Forum (8/26) -- the Chemcraft isolante is sold in quarts and gallons...if you can find it. ...

    Dust collector question
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- My shop is out in the sticks, I own a lot of property and no neighbors. I dump my dust co ...

    Re: Ergonomic Mouse for drafting
    A message posted at WOODWEB's CAD Forum (8/26) -- I have done quite a bit of drafting sheets for many years as personal use now long retired, and so ...

    Re: Transition from Autocad to Wood cad/cam or Giotto or BSolid
    A message posted at WOODWEB's CAD Forum (8/26) -- Gary MV has alienated plenty of shops with English as their first language. I shutter to think what ...

    Re: Dust collector question
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- I blow the exhaust from my 1200 CFM DC outdoors. I live in western NY and it is cold here ...

    Ergonomic Mouse for drafting
    A message posted at WOODWEB's CAD Forum (8/26) -- Was wondering if any of you drafters have struggled with carpal tunnel and made a change in the typ ...

    Re: Dust collector question
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- Bob's point will probably be a killer; at the end of the run sudden drop of pressure woul ...

    Re: Transition from Autocad to Wood cad/cam or Giotto or BSolid
    A message posted at WOODWEB's CAD Forum (8/26) -- Pat, The OP never answered me on where he is located, or what the primary language is there. I beli ...

    Re: Dust collector question
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- Run the end of the pipe into the side of a plywood box with no bottom. Maybe a 2 or 3' cu ...

    Re: Woodworking software
    A message posted at WOODWEB's CAD Forum (8/26) -- That question has been asked numerous times on the Canadian Woodworking & Home Imp Forum (CWWF) ...

    Re: Difficult handle detail
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- I just finished a job just like that on Rift White Oak. My process was: *Edge band the sl ...

    Re: finishing wood tops
    A message posted at WOODWEB's Finishing Forum (8/26) -- We've been using Waterlox on all our wood tops for over 15 years. I had met the owner of wate ...

    Re: Cabinet Vision Processing Speed
    A message posted at WOODWEB's CAD Forum (8/26) -- Your OP is too vague to provide any meaningful reply but as Dave says, if Shocked means more than a ...

    Re: Ergonomic Mouse for drafting
    A message posted at WOODWEB's CAD Forum (8/26) -- Logitech track ball once you learn them you will never use a conv. mouse again. Plus you can stand ...

    Re: Transition from Autocad to Wood cad/cam or Giotto or BSolid
    A message posted at WOODWEB's CAD Forum (8/26) -- What are the odds that a non English speaking company is going to be able to navigate the nuanced a ...

    Re: Dust collector question
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- I see no real issues in doing this. Just pipe straight to the blower output to the pipe l ...

    Re: Dust collector question
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- What about moisture problem from humidity & rain? I would imagine the pipe would get ...

    Re: Dust collector question
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- Just get a wagon with hydraulic lift, or manure spreader with higher sides added. Blow it ...

    Re: Dust collector question
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- I don't know about the climate in your area, but if it get's cold in the winter you're go ...

    Re: Dust collector question
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- I hadn't thought about that Bob, might have to put a downward angle on it as it leaves th ...

    Re: Dust collector question
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- Duster, I hadn't thought about the heat issue, that probably kills the whole idea. Thanks ...

    Tool bags
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/26) -- What is your preferred tool bag configuration? ...

    Re: Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (8/26) -- You'll get a wide variety of answers to your basic questions. I would follow ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/26) -- My best results for Level sealer , are to put a couple fat coats of the level sealer .... Thi ...

    Re: Curly Maple Mantle piece
    A message posted at WOODWEB's Finishing Forum (8/26) -- Ken , I like to use dye or wipe stain , .dye stain keeps the wood a little more vibrant . A c ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/26) -- James, my knowledge is somewhat vintage. It's been many years since I worked in a production ...

    Re: Entry Door
    A message posted at WOODWEB's Architectural Woodworking Forum (8/26) -- John S., You seem to have some experience with Timberstrand for doormaking, a ...

    Re: Porter Cable Dovetail Omni Jig
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- You can use the dovetail jig to make any width drawer you want. You just have to set i ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/26) -- Peter , sorry for late response . yes Level can go directly over dye stains . No , I personal ...

    Re: Employee Side Work
    A message posted at WOODWEB's Business and Management Forum (8/26) -- We had a situation once in our shop where, as Chipboard recommends, we negotiat ...

    Re: how much would you pay?
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- I agree with Rich C. The SCMI is a far better machine - assuming it is in reasonable shap ...

    Re: Compensation for neighbor giving up space
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Stefan, no one on this site is a stranger to me. I have been an active member s ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/26) -- Thanks Leo , . I just pulled up the info on The interior sealer . We're in Florida ... So I'm ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/26) -- Thanks Leo ,we do a lot of custom faux finishes so I was just wondering . Usually a lot of di ...

    Re: Drum Sander Conveyor Belt
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- I agree. Start with the switch. You might try spraying the guts of the switch with an ...

    Re: Ballpark equip costs to start milling reclaimed wood flooring??
    A message posted at WOODWEB's Sawing and Drying Forum (8/26) -- Cost is tough to nail down and versatility would be something to consider but my list ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/26) -- Well, 8 mil is a lot better than 5 mil you get with CV. If you need to sandwich layers you ca ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/26) -- That's why I got away from Level Sealer. It takes to long for it to fully cure and if you don ...

    Re: Is My D C Too Small?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/26) -- Only problem is it usually makes you take 3 passes. I'm old schoo ...

    Re: Compensation for neighbor giving up space
    A message posted at WOODWEB's Business and Management Forum (8/26) -- How is it that a successful (we assume) businessman needs to consult a forum of ...

    Buying a CNC machine
    A message posted at WOODWEB's CNC Forum (8/26) -- I have small business ,have 4 guys. We build custom cabinets tradeshow booths and display fixtures. ...

    Re: Log pricing
    A message posted at WOODWEB's Sawing and Drying Forum (8/26) -- Market value depends on where you are, species, and grade of the log. Most are happy ...

    Re: Ballpark equip costs to start milling reclaimed wood flooring??
    A message posted at WOODWEB's Sawing and Drying Forum (8/26) -- Thanks for the reply. I have no idea as to what exactly I need. Very very new to this ...

    Re: What species of wood are you using for painted cabinets?
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- Adam, We have considered 1 pc. mdf doors but we have yet to try them. I'm not sure mdf do ...

    Re: What species of wood are you using for painted cabinets?
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- Soft maple and have used hard maple a few times . We make our doors and can't remember ev ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/26) -- I don't have an answer for you about sandwiching coats. I basically use it for working surfac ...

    Re: Stationary Log Carriage for 40' Logs - Best Options for a Newbie
    A message posted at WOODWEB's Sawing and Drying Forum (8/26) -- Peterson & Lucas mills can add as many extension as you want. I'd contact them fi ...

    Re: Porter Cable Dovetail Omni Jig
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- The problem with letting it be asymmetrical is there tends to be a gap at the top of t ...

    Re: how much would you pay?
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- He wants $2200 for it. I would switch out the head to a byrd (another $1300 and maybe a d ...

    Re: Lacqure finish cracking over paint
    A message posted at WOODWEB's Finishing Forum (8/26) -- Not trying to be a wise guy, but save the doors, glaze the wrinkles and call it your "di ...

    Re: Shellac on top of wood wax
    A message posted at WOODWEB's Finishing Forum (8/26) -- Are you using the Bullseye Universal shellac seal coat ..? That Goes over a lot of problem pi ...

    Re: Making Wine rack cabinet in Cabinet vision
    A message posted at WOODWEB's CAD Forum (8/26) -- the view in polyboard is just view the real calculate is according parameters(size of squre,min fro ...

    Re: Lacqure finish cracking over paint
    A message posted at WOODWEB's Finishing Forum (8/26) -- That's not a crack, it's a wrinkle, probably because you didn't allow enough dry time between ...

    Re: Small tool dust collection.
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/26) -- Mirka Ceros is connected to a Fein Turbo II. Not enough suction p ...

    Re: Drum Sander Conveyor Belt
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- had same problem with my grizz. it was very regular with rotation of tension/tracking ...

    Re: how much would you pay?
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- $3500 for a 3ph solid machine or $3100 for a 1ph question mark. Kind of like $7000 for a ...

    Re: Black Walnut Finishing
    A message posted at WOODWEB's Finishing Forum (8/26) -- i was always under the impression that you take the bark off because it will eventually fall ...

    drum sander
    A message posted at WOODWEB's Solid Wood Machining Forum (8/26) -- anyone replaced feed belt on their drum sander with lace on replacement from mcleo ...

    Re: What species of wood are you using for painted cabinets?
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- Definitely soft maple. The grain in poplar will telegraph through the finish no matter ho ...

    Re: Parametric Programing for Frog 3D
    A message posted at WOODWEB's CNC Forum (8/26) -- Loop program like this are a life saviors. You just need to change the amount of part you need. Why ...

    Re: Shellac on top of wood wax
    A message posted at WOODWEB's Finishing Forum (8/26) -- Thanks for the tip-we use Zinsser Clear(waxed I think, ironically) Shellac. Will try some Bul ...

    Re: Porter Cable Dovetail Omni Jig
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- Hey the Omni jig is a nightmare...I know from experience...ugh ..bought a Keller jig n ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/26) -- James, do you typically spray a thinned seal coat of Level or something else first or just go ...

    Re: how much would you pay?
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- You are right, they have been around a long time, but I bet they don't have parts for mac ...

    Re: Ballpark equip costs to start milling reclaimed wood flooring??
    A message posted at WOODWEB's Sawing and Drying Forum (8/26) -- Planer, straight line rip saw, cut off saw,moulder and a mentor. Good luck, Bob ...

    Re: Is My D C Too Small?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/26) -- Hey Leo, good advice about only taking of .015, that helps a lot ...

    Re: Compensation for neighbor giving up space
    A message posted at WOODWEB's Business and Management Forum (8/26) -- I wonder if Harold's willingness to consider other points of view is part of hi ...

    Re: Grain Filling Mohogany
    A message posted at WOODWEB's Finishing Forum (8/26) -- Just emailed a message to my MLC rep about the glazing and toning. If he answers I'll convey ...

    Re: Veneer Edgebanding around Tight Radius
    A message posted at WOODWEB's Veneer Forum (8/26) -- Festool makes a hand held edgebander that might work good for your application. ...

    Re: Making Wine rack cabinet in Cabinet vision
    A message posted at WOODWEB's CAD Forum (8/26) -- upgrade for polyboard yours life will be much bater ...

    Re: pedestal table base size
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- Really good looking table man ...

    Re: Is high end work dying?
    A message posted at WOODWEB's Business and Management Forum (8/26) -- I think folks like you and I have been asking that question for about 2,000 yea ...

    Re: How do you work with an open face booth
    A message posted at WOODWEB's Finishing Forum (8/26) -- You can add side panels and top panels to make a longer (deeper) booth. You will still have a ...

    Re: Is high end work dying?
    A message posted at WOODWEB's Business and Management Forum (8/26) -- I won't pretend I know, but I don't think so. I'm working on a $3m home right n ...

    Widebelt abrasive suppliers...
    A message posted at WOODWEB's Solid Wood Machining Forum (8/26) -- I'm curious as to who guys are buying their wide belt paper from and also what bra ...

    Re: Booking production hours.
    A message posted at WOODWEB's Business and Management Forum (8/26) -- LOL--not that bad. "Total production hours" are scheduled for jobs. B ...

    Re: Is high end work dying?
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Worked for a client that built a million dollar plus house. Made 3 vanities for ...

    Make Up Air
    A message posted at WOODWEB's Finishing Forum (8/26) -- Hello, We're installing a Reznor make up air unit in a new to us building. Are there guidelin ...

    Spoil Board
    A message posted at WOODWEB's CNC Forum (8/26) -- I got some Ultralight MDF for spoilboard's and we have not had good luck with it. I don't remember ...

    Re: Is high end work dying?
    A message posted at WOODWEB's Business and Management Forum (8/26) -- We do high end furniture both wood and frame up upholstered. We were dead all s ...

    Re: Make Up Air
    A message posted at WOODWEB's Finishing Forum (8/26) -- how close is it to your gas line. in winter it will be using close to 1 million BTU so you ne ...

    Re: Spoil Board
    A message posted at WOODWEB's CNC Forum (8/26) -- We use Plum Creek mdf and we seal the edges with spray contact cement or we run it through our edge ...

    Anderson CNC Tool Carousel Problem
    A message posted at WOODWEB's CNC Forum (8/26) -- I have an Anderson SUP/Stratos with what appears to be a tool magazine/carousel problem. I think th ...

    Re: Spoil Board
    A message posted at WOODWEB's CNC Forum (8/26) -- Been using 5x10 sheets of ultralight for years with no problem. Before that we used the cheapest pa ...

    Re: Smallest Possible Gap Face Frame Hinge?
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- Blum 38/39 series compact faceframe hinges are available in 1-1/4" plus can adjust u ...

    Re: Make Up Air
    A message posted at WOODWEB's Finishing Forum (8/26) -- We have a non heated one that opens when the booths are on but we have it near the booths. Th ...

    Biessenest
    A message posted at WOODWEB's CNC Forum (8/26) -- Does anyone know what the password is to "Unprotect" the worksheets in BiesseNest. I want ...

    Re: Biessenest
    A message posted at WOODWEB's CNC Forum (8/26) -- Danny not sure what you are trying to do..are you wanting to rename the material sheets? Contact me ...

    Re: Spoil Board
    A message posted at WOODWEB's CNC Forum (8/26) -- I think we had Ultralight the first time. We skim off both sides in the beginning no matter the boa ...

    Re: Booking production hours.
    A message posted at WOODWEB's Business and Management Forum (8/26) -- Seriously ? Are you guys bidding with no hours thrown out on the jobs ? Are you ...

    Re: Widebelt abrasive suppliers...
    A message posted at WOODWEB's Solid Wood Machining Forum (8/26) -- I use SIA belts and get a good price on them through Industrial Finishes in Eugene ...

    Quick Wood vacuum
    A message posted at WOODWEB's Cabinetmaking Forum (8/26) -- Hi All We have a new to us Quick Wood sanding machine with vacuum through the belt. We ar ...

    Re: Widebelt abrasive suppliers...
    A message posted at WOODWEB's Solid Wood Machining Forum (8/26) -- Baer supply carries them Supergrit.com has great turnaround time Klingspor abrasiv ...

    Re: Help with creating finish
    A message posted at WOODWEB's Finishing Forum (8/26) -- Spray the wood with a black stain or paint, seal it, use a gray glaze or paste filler to fill ...

    Re: Furniture Makers Identification
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- Taylor, how about checking with the historical society. They be willing to do the rese ...

    Re: 3MM pvc on curve counter tops
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/26) -- I thought the ones that applied the glue to the part worked better. And ...

    Re: HSK Lubricant
    A message posted at WOODWEB's CNC Forum (8/26) -- Spray it on a couple tool holders, wipe off leaving a light film. Call out tool changes. Never put ...

    Shape and Sand wheels
    A message posted at WOODWEB's Solid Wood Machining Forum (8/26) -- Where would I find the wheels for the top pressure beam on a Crouch (Larick) shape ...

    Re: How do you work with an open face booth
    A message posted at WOODWEB's Finishing Forum (8/26) -- Try not to piss into the wind when you gotta go? ...

    Re: Green White Oak
    A message posted at WOODWEB's Architectural Woodworking Forum (8/26) -- I'd be surprised that the oil is drying on the wet oak. ...

    Re: Spoil Board
    A message posted at WOODWEB's CNC Forum (8/26) -- I use ultra lite mdf but at work they just use regular mdf with good results ...

    Re: HSK Lubricant
    A message posted at WOODWEB's CNC Forum (8/26) -- http://www.cronsrud.com/store/index.php/metaflux-grease-400ml.html ...

    Re: Spoil Board
    A message posted at WOODWEB's CNC Forum (8/26) -- Kirk that is regular MDF? We paint the edge with latex paint. ...

    Re: HSK Lubricant
    A message posted at WOODWEB's CNC Forum (8/26) -- Can you like to a source, the earlier link is a paste. ...

    Re: HSK Lubricant
    A message posted at WOODWEB's CNC Forum (8/26) -- How are you applying that? ...

    Re: HSK Lubricant
    A message posted at WOODWEB's CNC Forum (8/26) -- Thanks, ordered some up. ...

    Re: Steam Bending 2" thick walnut
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- Okay, so I finally got around to this project and here are some pics of the finished r ...

    Re: Problem - upholstery rippled edge
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- Mark - Google it. I bought it from Hancock's Fabrics - a better fabric chain store wit ...

    Re: Vertical Machining Center
    A message posted at WOODWEB's CNC Forum (8/26) -- I looked at them also but not seriously. They suffer the same drawbacks and advantages that pod &am ...

    Re: Problem - upholstery rippled edge
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- Hi David, thanks for the Ultrasuede tip. Where can I buy Ultrasuede from? Turns out, g ...

    Re: Problem - upholstery rippled edge
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- I have worked leather wet and it allows it to stretch and shrink to go around corners ...

    Re: Entry doors glass
    A message posted at WOODWEB's Architectural Woodworking Forum (8/26) -- Glass stops are made on the shaper, with wide stock being profiled and then r ...

    Re: Exterior bench of stainless steel and wood
    A message posted at WOODWEB's Architectural Woodworking Forum (8/26) -- A frequently overlooked item is that all stainless steels are not created equ ...

    Re: change Scmi moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (8/26) -- Russ,sorry for the delay on the response but everything has been checked out and c ...

    Re: charging for planing lumber
    A message posted at WOODWEB's Sawing and Drying Forum (8/26) -- Let's assume that the typical piece is 6" x 12'. This is 12 BF if 8/4. If have s ...

    Re: charging for planing lumber
    A message posted at WOODWEB's Sawing and Drying Forum (8/26) -- We pay $0.27 for S2S SLR1E. I think the breakdown is 17 cents for the S2S and 10 for ...

    Re: Problem - upholstery rippled edge
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- It's still not going to be easy even if you don't glue on the suede. It's going to tak ...

    Re: change Scmi moulder from 440v to 220v
    A message posted at WOODWEB's Solid Wood Machining Forum (8/26) -- Jumpers: The motors should have plates that show which winding leads need to be ti ...

    Re: Moving Machinery
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/26) -- Thanks - we were able to safely move the machine after removing t ...

    Re: Legrand Under Cabinet Lighting
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/26) -- Convince whoever to use different lighting, is that an option? 4" ...

    Re: Problem - upholstery rippled edge
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- Half inch is very thin. We use 1" and never glue the fabric ever. ...

    Re: kuper FW1150 stitching veneer trouble
    A message posted at WOODWEB's Veneer Forum (8/26) -- Is it hot air heated or direct heated tube ? May not have the right thread ...

    Re: Best Wood Glue In Caulk Tube?
    A message posted at WOODWEB's Adhesives Forum (8/26) -- You might want to describe your application. ...

    Re: Problem - upholstery rippled edge
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- This is what I'm making. FYI ...

    Re: Steam Bending 2" thick walnut
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- Looks really nice. ...

    Re: Cabinet design software
    A message posted at WOODWEB's CAD Forum (8/26) -- Hi Don, Cabinet Pro LLC offers Rental, Rent-To-Own, as well as Purchase options for software that c ...

    Re: Corian to steel adhesive?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/26) -- Your application is getting into territory that is starting to fall outs ...

    Re: Cabinet design software
    A message posted at WOODWEB's CAD Forum (8/26) -- Hi Don, I saw your post about a Cabinet Design Software. I work for KCD Software and we have a prog ...

    Re: Cabinet design software
    A message posted at WOODWEB's CAD Forum (8/26) -- Hi again, Don To be clear about the timeline I mentioned above, one to three days is usually requir ...

    Corian to steel adhesive?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/26) -- I made 2 tops, using 1/4" Corian, which covered a 3/4" square ...

    Re: Steel table legs with timber feet
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- Bore out the logs, epoxy the steel pipe inside it. If you bore deep enough, the epoxy ...

    Re: Tooling and techniques for chair parts
    A message posted at WOODWEB's Furniture Making Forum (8/26) -- The shared link by GAW is really very helpful specifically workshop, technology and te ...

    Re: Cabinet design software
    A message posted at WOODWEB's CAD Forum (8/26) -- http://www.cabinetsensesoftware.com/ ...

    Re: Cabinet design software
    A message posted at WOODWEB's CAD Forum (8/26) -- cabinetplaner.com ...

    Re: Milesi Waterbourne
    A message posted at WOODWEB's Finishing Forum (7/26/23) -- I am new to spraying Milesi Waterbourne. I am using a 2.5 tip at 25 psi. I thin the produc ...

    Re: 3m 100’ hose for supplied air
    A message posted at WOODWEB's Finishing Forum (7/26/23) -- how long can these hoses be used before they should be replaced? mine is probably 10 years ...

    Toughest/most reliable 12" miter saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (7/26/22) -- Does ANYONE make a reliable 10-12" miter saw any more? I don't care if it ...

    Re: Toughest/most reliable 12" miter saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (7/26/22) -- For durability, safety, and ease of use, it's hard to beat a pneumatic upcut sa ...

    RE: Dust Collection
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (7/26/22) -- For approximately a 2500 sq. ft. woodshop, what type of DUST F ...

    RE: Medullary Rays
    A message posted at WOODWEB's Finishing Forum (7/26/22) -- In red oak, how can we HIGHLIGHT Medullary Rays, so that they would "pop off" th ...

    Re: RE: Medullary Rays
    A message posted at WOODWEB's Finishing Forum (7/26/22) -- I add a little dye to the finish schedule to change the background color. The oak will dar ...

    Re: Shaping 3/4 ply
    A message posted at WOODWEB's Cabinetmaking Forum (7/26/22) -- Making French cleats. We have the tilting shaper and power feeder so no out of pocket ...

    Re: Toughest/most reliable 12" miter saw?
    A message posted at WOODWEB's Solid Wood Machining Forum (7/26/22) -- I'd recommend a vintage Dewalt radial arm saw. Nothing beats them for toughness ...

    Re: KV Standard Cutter
    A message posted at WOODWEB's Cabinetmaking Forum (7/26/22) -- This cutter was sold a long time ago. I cannot get logged in to remove the post. ...

    Re: RE: Dust Collection
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (7/26/22) -- Cyclone with no filter vented outside. ...

    Re: Blum slides back ordered
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Hey FM, Sorry for not replying until now but I was traveling all weekend. Here is informa ...

    Re: Planer bed coating
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Ill have to give the lundmark a try. Wax here too but Ive always just used el-cheapo minw ...

    Re: A warning to newbies
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Niche market and skills. Identify both, then develop them in yourself. John McG ...

    Re: A warning to newbies
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Just to cut down on the conjecture In So Cal the price for high end cabinets is ...

    Re: A warning to newbies
    A message posted at WOODWEB's Business and Management Forum (7/26) -- I very glad you all did so well. What I am saying is that on the ground, reside ...

    Re: Veneering solid wood panels for exterior
    A message posted at WOODWEB's Veneer Forum (7/26) -- We make 7 ply panels for exterior doors frequently. The 7 plies comer from a core, solid wood fo ...

    Re: dust/shavins into enclosed trailer
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (7/26) -- You are the reason there are professionals that can design and bu ...

    Re: Planer bed coating
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- We always used to use Minwax, then I tried Johnson. No going back. Minwax has way more st ...

    Re: dust/shavins into enclosed trailer
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (7/26) -- Correct, hence the question, looking for general advice, tips ect ...

    Re: Planer bed coating
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- I have a piece of ply that I shove thru with a squirt of molder bed lube in front of it. ...

    Re: Bsolid Programming
    A message posted at WOODWEB's CAD Forum (7/26) -- David, that would be great. We do all of our design in Mozaik, so I really know nothing about Bsoli ...

    Re: A warning to newbies
    A message posted at WOODWEB's Business and Management Forum (7/26) -- I would agree with Anonymous, Harold and David, There are those who are cabinet ...

    Re: Planer bed coating
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- the Lundmark paste wax is the best paste wax i've ever used for machinery. you don't have ...

    Re: Shop based miter saw length gage
    A message posted at WOODWEB's Solid Wood Machining Forum (7/26) -- I have seen the one Mitch is talking about, built like a tank. https://scotchman.c ...

    Re: Planer bed coating
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Appreciate responses. Will give paste wax a try again. Previous use didn't seem to last. ...

    Re: 3D Cabinetry Rendering Website
    A message posted at WOODWEB's CAD Forum (7/26) -- I've added fillers to all cabinets but the upper corner cabinet. Just use the filler of the cabinet ...

    Re: Planer bed coating
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Good selection of waxes. Is it the 1lb can of wax? ...

    Re: problem with 2k AAA pump, time to replace?
    A message posted at WOODWEB's Finishing Forum (7/26) -- Do I need catalyst flush, or okay to leave CV acid in it all year? I don't spray much volume ...

    Re: problem with 2k AAA pump, time to replace?
    A message posted at WOODWEB's Finishing Forum (7/26) -- Sorry I’ve never sprayed CV through mine.only2 K urethane. I find that if I have a problem wi ...

    Re: The need for outsourcing in the new economy
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Outsourcing is controversial and often politically manipulated to make claims about job l ...

    Re: Machining small parts
    A message posted at WOODWEB's Architectural Woodworking Forum (7/26) -- Could you do all the machining on the CNC on a single board and then rip the ...

    Re: Best place to order TORX screws online
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- GRK makes something to do just about anything. ...

    Re: Best place to order TORX screws online
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- McFeely's, Fastenal, E.B. Bradley,Wurth Lewis ...

    Re: Best place to order TORX screws online
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Also look up QuickScrews. ...

    Re: Assembly workstation in action - 78 cabinets assembled in 7.5 hours
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Now that youve got us all thinking about it, staying in your current format, shaving seco ...

    Toying with an idea
    A message posted at WOODWEB's Furniture Making Forum (7/26) -- Without getting into too much detail because the idea is still bouncing around in my h ...

    Re: Removing Wood Glue
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- To ask how to remove water based glue amongst a few professionals shows a weakness in pro ...

    Re: Assembly workstation in action - 78 cabinets assembled in 7.5 hours
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- You may enjoy the challenge of that kind of record setting pace. But not me. I do this ki ...

    Re: Foreman uses the Buddy System
    A message posted at WOODWEB's Business and Management Forum (7/26) -- It happened again..........this is the third Saturday in a row "The Buddie ...

    Re: Toying with an idea
    A message posted at WOODWEB's Furniture Making Forum (7/26) -- Why insist on an unbalanced finish on the top? Just do it right so you don't have to d ...

    Re: sound enclosure for 10 hp siemens vacuum pump
    A message posted at WOODWEB's CNC Forum (7/26) -- My hearing is Gone, Smart move on your part. Mine is in a small room behind CMU with plenty of area ...

    Re: Toying with an idea
    A message posted at WOODWEB's Furniture Making Forum (7/26) -- The sliding dovetail option has been done many times. Reasonable fit (not so tight tha ...

    Re: Removing Wood Glue
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- I soften PVA with a rag and methyl hydrate. Denatured alcohol. Even cured glue turns to a ...

    Re: Assembly workstation in action - 78 cabinets assembled in 7.5 hours
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- I think its great for your style of work. Out of a kitchen with 50 sheets of 3/4 we get l ...

    Re: sound enclosure for 10 hp siemens vacuum pump
    A message posted at WOODWEB's CNC Forum (7/26) -- We keep our 40hp pump in the compressor room. Keeps the noise and heat away from the operator and d ...

    Re: Standardization of Lumber Sizes
    A message posted at WOODWEB's Sawing and Drying Forum (7/26) -- Yes...all legitimate mills use the same standard. Look for the grading stamp from NeL ...

    Re: Assembly workstation in action - 78 cabinets assembled in 7.5 hours
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- You work at that pace for 8 hrs? How much coffee do you drink? ...

    Re: Cabinet vision
    A message posted at WOODWEB's CAD Forum (7/26) -- Yes you can totally control face up and down by selecting as said above a good face in the cabinet ...

    Re: Assembly workstation in action - 78 cabinets assembled in 7.5 hours
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- You're better than me. I do ten on a good day. ...

    Re: sound enclosure for 10 hp siemens vacuum pump
    A message posted at WOODWEB's CNC Forum (7/26) -- Sometimes venting the exhaust outside drops the noise. Not familiar with that pump. ...

    Re: Removing Wood Glue
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Your next question will be: "Which kind of Titebond?" ...

    Re: 2K poly
    A message posted at WOODWEB's Finishing Forum (7/26) -- ML Campbell CODA is amazing! Contact your local distributor to try it out! ...

    Re: Rate your Nested Based CNC
    A message posted at WOODWEB's CNC Forum (7/26) -- Machine: Spectrum by Anderson America Year: 2015 Table: 5 x 10 Vacuum: 2 Becker 10 hp linked togeth ...

    Frameless with 1/8'' reveals
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Hey everyone, I know this subject has been beat to death many times. We're from northern ...

    Re: Rate your Nested Based CNC
    A message posted at WOODWEB's CNC Forum (7/26) -- Northwood 265 IH 2003 Two 5’ x 6’ Tables Full 5’ x 12’ coverage by all tools Travaini Oil Vane 40HP ...

    Re: Painted White Oak
    A message posted at WOODWEB's Architectural Woodworking Forum (7/26) -- What needs to be recognized is that rift and flat sawn sort of move in differ ...

    Re: Help Want Adds
    A message posted at WOODWEB's Business and Management Forum (7/26) -- We were finally forced to turn to Indeed. It was a good experience and you get ...

    Maestro MICRO-FASTENERS
    A message posted at WOODWEB's CNC Forum (7/26) -- I'm using Xilog Maestro on my SCM Patrix s22. I've been using it for a while and am trying to explo ...

    Re: Producing a modular line of cabinet? To build in a semi custom shop?
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Charlie- We did it! Although, it didn't end up exactly how I had envisioned it, ...

    Ayen Magnum Dowel Inserter setup
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Hi, I just bought a used Ayen Magnum with no manual. I'm wondering if anyone has advice o ...

    Re: mdf glue with good open time
    A message posted at WOODWEB's Adhesives Forum (7/26) -- Look into PPR glues like Unibond plastic resin, or Ultra-CAT PPR. I use them in vac bag layup ...

    Re: Help Want Adds
    A message posted at WOODWEB's Business and Management Forum (7/26) -- secret marketing tool. Email your architects/contractors/homeowners you are in ...

    slot mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (7/26) -- Hello I am looking for an old style Laguna slot mortiser.(see pics) I need to make ...

    Re: cutting thick wood
    A message posted at WOODWEB's CNC Forum (7/26) -- thank you all for the tip dropout the link you sent doesn't work i need to cut all the way threw a ...

    Re: slot mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (7/26) -- Hi Shane, We have something similar unfortunately I cant down load any pictures to ...

    Re: Help Want Adds
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Vets !! look to your local VA, i found some who had taken jobs in call centers ...

    Shuffleboard table
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Got a request to build a custom shuffleboard table anyone ever built one? Just wondering ...

    Re: Producing a modular line of cabinet? To build in a semi custom shop?
    A message posted at WOODWEB's Business and Management Forum (7/26) -- ted thanks you. I would love to know more. ...

    SKB 50 doweling machine
    A message posted at WOODWEB's Solid Wood Machining Forum (7/26) -- Does anyone out there have an SKB 50 wood dowel boring machine I can ask a few que ...

    Re: What is your busiest time of year?
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Interesting, thanks for the responses everyone. Love your input. ...

    Re: Can anyone recognize this control?
    A message posted at WOODWEB's CNC Forum (7/26) -- 1. Did you contact Felder? 2. What software package is the post processor for? ...

    Re: Frameless with 1/8'' reveals
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Blum Tandems. I use 5/64" reveals (2mm). ...

    Re: slot mortiser
    A message posted at WOODWEB's Solid Wood Machining Forum (7/26) -- Sorry, must have Del. the Email. fred@rivercity,ca ...

    Re: Weeke Venture 2.5
    A message posted at WOODWEB's CNC Forum (7/26) -- Have you tried Stiles? ...

    Just put them on sanding...
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Bit of a rant. I get a kick out of it every time someone local or someone I kno ...

    Re: Disruptive Economies
    A message posted at WOODWEB's Business and Management Forum (7/26) -- That used to work David, but not anymore. Rural America is running out of groce ...

    Re: How To Adhere Metal to a Backer Board
    A message posted at WOODWEB's Veneer Forum (7/26) -- I want to add to a comment I made above. Be sure you clean off the steel before you glue it. Ste ...

    Re: Just put them on sanding...
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Sweeping drives me nuts. I can spend 20 m8nutes with a guy showing him how and ...

    Re: new VPS creating issues with edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- After experimenting with a number of blades recommended by tooling suppliers, I found the ...

    Re: Cabinet Vision question
    A message posted at WOODWEB's CAD Forum (7/26) -- yes. but to import the the dxf files they have to be properly prepared for import and that depends ...

    Re: new VPS creating issues with edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- It is actually a new blade (although now dull blade). A different type I am trying with n ...

    Re: Large area glue up
    A message posted at WOODWEB's Adhesives Forum (7/26) -- I agree with Tom's remarks. I would add that the the (thinner) top surface should be balanced ...

    Re: Rubber gasket
    A message posted at WOODWEB's CNC Forum (7/26) -- I typically use 1/8" x 1/4" gasket material without adhesive. I cut a 1/8" x 3/16&qu ...

    Re: bit life
    A message posted at WOODWEB's CNC Forum (7/26) -- Eric, Its hard to put a firm number on the number of sheets that you will get. Everyone's applicati ...

    Re: Apply Face Frames after Finsh
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- We pocket screw non finished ends and on finished ends we switched to the Lamello Tenso a ...

    Re: Disruptive Economies
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Take a look at what Uber and Lyft are doing to cab medallion holders, those guy ...

    Re: cnc nested machine
    A message posted at WOODWEB's CNC Forum (7/26) -- Can't speak for the Biesse, but I have a similar Vantech and use CV mostly, with oddball parts draw ...

    Re: Just put them on sanding...
    A message posted at WOODWEB's Business and Management Forum (7/26) -- I think you had a good point when you said you had a girl that was good at that ...

    Re: Large area glue up
    A message posted at WOODWEB's Adhesives Forum (7/26) -- Good luck with that. Whatever you do, don't use a glue with any water whatsoever. 3/16" ...

    Re: Tigerstop or Razorgage
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- I can't speak for Tiger Stop but we have had a razor gage for around 10 years and we have ...

    Re: Apply Face Frames after Finsh
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- I have a bunch of shops using the Lamello Tenso P-14 connectors with pre-load clips for t ...

    Re: Exterior Wood Door Questions
    A message posted at WOODWEB's Architectural Woodworking Forum (7/26) -- David, I love the picture of all the muntions, stiles and rails. That looks s ...

    Re: Need help finishing wood coffee table
    A message posted at WOODWEB's Finishing Forum (7/26) -- There is no distressing in that letter M, it's just fresh off a band saw mill. The table unde ...

    Rubber gasket
    A message posted at WOODWEB's CNC Forum (7/26) -- Hi All I usually do sheet goods so I'm a little out of my depth here. I need to make a fixture with ...

    Re: Porter Cable 505
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- To the OP, as Guy says, get one and you'll like it so much you'll acquire more of the Fes ...

    Re: Drying Black Spruce dead straight
    A message posted at WOODWEB's Sawing and Drying Forum (7/26) -- Gene, if you would, could you post a drawing or similar way of seeing just what you m ...

    Re: Disruptive Economies
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Alan, I wouldn't worry too much about cabinetmaking being a mature industry. We ...

    Re: Tigerstop or Razorgage
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Steve, if you advise the configuration of your TigerStop, I would be happy to provide a q ...

    Re: new VPS creating issues with edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Try finding a hollow ground blade from Leitz tooling. We have a ton of these for out Holz ...

    Re: Salice hinge question
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- Thank you so much Dennis. Great to know Salice stands behind their product. I will defini ...

    Re: Chiseling corners in MDF shaker door
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- A big thanks to Marty for helping me out on this one. A CNC wizard! worked it out in the ...

    Re: new VPS creating issues with edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- How fresh is the blade in the panel saw? I'd switch blades before trying anything else. ...

    Re: Drying Black Spruce dead straight
    A message posted at WOODWEB's Sawing and Drying Forum (7/26) -- Consider a pie that you cut into four equal pieces. That is what you do with the end ...

    Re: Disruptive Economies
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Bring back Drop City!! Or Soleri's Arcosanti! The hippies had it right all alon ...

    Re: Large area glue up
    A message posted at WOODWEB's Adhesives Forum (7/26) -- +1 for Tom's idea. Epoxy and a one-off bag from visquine & butyl tape is the way to go. ...

    Re: Just put them on sanding...
    A message posted at WOODWEB's Business and Management Forum (7/26) -- All hand machine sanding (orbital) or do you have a widebelt? ...

    Re: Porter Cable 505
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- I have the festool half sheet best half sheet i have ever used ...

    Re: Need help finishing wood coffee table
    A message posted at WOODWEB's Finishing Forum (7/26) -- Thanks for the suggestion, i will try it out. ...

    Re: Pernicious Regulation & Govt mandated hearing protection
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Target rich if you want to volley buzzwords back and forth, yes. But if you con ...

    Re: Pernicious Regulation & Govt mandated hearing protection
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Pat, All you guys that say "vote with your feet" crack me up. You act ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- This has come up in the past. I have a 5hp 220v Curtis with only a 23gallon tank. It all come ...

    Re: Pernicious Regulation & Govt mandated hearing protection
    A message posted at WOODWEB's Business and Management Forum (7/26) -- One other remark regarding this. The overarching argument generally goes that y ...

    Re: Pernicious Regulation & Govt mandated hearing protection
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Pat, Your arguments provide a target rich environment. Local government was bes ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- No on the 30 gallon unless you are doing small projects. Air temp will go too high in an over ...

    Re: Pernicious Regulation & Govt mandated hearing protection
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Oh I never thought of that. Except what about the people/families who come from ...

    Re: Pernicious Regulation & Govt mandated hearing protection
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Very little of my thinking comes from Ayn Rand. I do agree that it is best to v ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- Re: Line and connector size. I switched to all 3/8 fittings and hose thinking I could get mor ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- Sata pressure feed rp and hvlp spray guns use a lot of air;. a 5 hp 17cfm 80 gallon tank comp ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- Thanks Robert I know next to nothing about the technical side of finishing,. Ivdont currently ...

    Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- Hello fellow finishers, I am setting up a small finishing shop at my house in a 20x40' stand ...

    Cabinet Doors
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- I've done many pieces of furniture in the past, but I'm now tackling my first cabinet job ...

    Re: epoxy vs bondo on flooring
    A message posted at WOODWEB's Architectural Woodworking Forum (7/26) -- That Rangate looks like hot melt! Getting Bondo black enough would be a task ...

    Re: Cabinet Doors
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- We always find it's faster & easier to do the door and drawer installation in the sho ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- Sata 3000k hvip consumes just shy of 20cfm and the Sata rp just over 15cfm. like somebody sai ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- What is your Gun or Pump cfm requirement? Most guns will require at least 10cfm to operate... ...

    Re: epoxy vs bondo on flooring
    A message posted at WOODWEB's Architectural Woodworking Forum (7/26) -- Bondo is okay for filling dings or screw holes in paint grade cabinets. We ha ...

    Re: Pernicious Regulation & Govt mandated hearing protection
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Pat, What we have to start thinking about is not how we want life to be but how ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- Nick is correct. I had that size system and used high transfer guns like the ones Michael men ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- add to the larger diameter lines, high flow connectors...using these high volume connectors m ...

    Re: hickory table tops
    A message posted at WOODWEB's Finishing Forum (7/26) -- Clear casting resin is about the only "clear". Epoxy has an amber cast. No idea how ...

    Re: Wood Shower
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/26) -- I did a couple of showers in cypress some years ago, they sprayed a p ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- Just a follow up on what Nick was saying about the odor etc... You should probably think real ...

    Re: Which 26"-32" Thickness Planer for various kind of woods
    A message posted at WOODWEB's Solid Wood Machining Forum (7/26) -- cutterhead diameter 98mm cuttinf circle 101mm what ia the maximum planing depth? t ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- Why no to the 30 gal I've used them on job sites with no problem, care to elaborate? ...

    Re: Pernicious Regulation & Govt mandated hearing protection
    A message posted at WOODWEB's Business and Management Forum (7/26) -- reconcilable irreconcilable ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- Greatly appreciate all the help. God Bless you all Michael ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- RECOMMENDATION (sp) is no for the 30 gallon tank. ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- And what is a rotary screw? ...

    Re: Air compressor recomendation
    A message posted at WOODWEB's Finishing Forum (7/26) -- rotary screw ...

    Re: Coffered ceilings...
    A message posted at WOODWEB's Architectural Woodworking Forum (7/26) -- Thanks for the responses guys! I've been thinking about it over the last week ...

    Re: Mitred Boxes
    A message posted at WOODWEB's CNC Forum (7/26) -- I forgot to add. If I was running these boxes I would rip lengths on the saw first, edgeband then p ...

    Re: Red Oak for Barn Siding
    A message posted at WOODWEB's Sawing and Drying Forum (7/26) -- Thank you fellas, guess I'm not too far off then. 10-4 on the plantings Doc., I ain't ...

    Re: GF EnduroVar
    A message posted at WOODWEB's Finishing Forum (7/26) -- I wonder when (if?) GF started adding cross linker to the Clear Poly. Their tech. data sheet ...

    Re: Custom Furniture market data
    A message posted at WOODWEB's Business and Management Forum (7/26) -- It can be very difficult to navigate, but the US dept. of commerce keeps extens ...

    Re: Mitred Boxes
    A message posted at WOODWEB's CNC Forum (7/26) -- I mitre fold boxes every day on the CNC. We use MDF, Veneered MDF, ply and solid stock. I do not us ...

    Re: Edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (7/26) -- I absolutely Was livid with the stiles service department over a shut down issue within t ...

    Re: GF EnduroVar
    A message posted at WOODWEB's Finishing Forum (7/26) -- As far as a tack cloth I used a slightly damp rag, no tack cloth. Surface was dry when next c ...

    Re: milling quartered red oak
    A message posted at WOODWEB's Sawing and Drying Forum (7/26) -- The quartered logs will take several years to reach air dry (around 14% moisture cont ...

    Re: milling quartered red oak
    A message posted at WOODWEB's Sawing and Drying Forum (7/26) -- Hey Andy, Though I don't know the answer to your question, I do know that the Doc and ...

    Bonehead conversion varnish mistake
    A message posted at WOODWEB's Finishing Forum (7/26) -- I got ready to topcoat a 3d cnc cutout that took 20 hours to cut out, and like an idiot, I us ...

    Re: What is the best miter saw setup?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/26) -- I am looking at the new virutex combo chop saw and rip saw. our work ...

    Re: Bonehead conversion varnish mistake
    A message posted at WOODWEB's Finishing Forum (7/26) -- Call the techs for the manufacturer of that finish product. If you have to strip it there pro ...

    Re: Red Oak for Barn Siding
    A message posted at WOODWEB's Sawing and Drying Forum (7/26) -- Cedar would work well-- very durable, but hard to get large logs, and doesn't have ne ...

    Re: Looking for ideas on how you organize my tools for installations
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/26) -- We use the festool system. everything stacks and bottom box is attach ...

    Re: Looking for ideas on how you organize my tools for installations
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/26) -- Pat, I'm sure Tim Schultz has this figured out to perfection, althoug ...

    Re: GF EnduroVar
    A message posted at WOODWEB's Finishing Forum (7/26) -- John B. if you want to do a fair comparison you need to apply an equal number of coats of End ...

    Re: Anyone in Vegas?
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Paul, Same here as Leland. I would have loved to hear you speak but I left befo ...

    Re: Apps for tracking expenses
    A message posted at WOODWEB's Business and Management Forum (7/26) -- Thanks Jason. I checked out QB online and was a bit put off by the subscription ...

    Re: Delta 20" Bandsaw Tire Replacement...
    A message posted at WOODWEB's Solid Wood Machining Forum (7/26) -- Thanks Dave, I didn't see what I need on their website, but I'll give them a call ...

    Re: Trespa Panels
    A message posted at WOODWEB's Architectural Woodworking Forum (7/26) -- Try Sargents in Gardner, Contact me if you need a recommendation on who NOT t ...

    Re: What is the best miter saw setup?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/26) -- How do you like the Makita chop saw? ...

    Re: Failed glue joint
    A message posted at WOODWEB's Furniture Making Forum (7/26) -- I am going to slightly disagree with the other responses due to that if the wood stile ...

    Re: Entering the entry door Business
    A message posted at WOODWEB's Architectural Woodworking Forum (7/26) -- Pat - I get humbled weekly. Hell, sometimes more. Its like getting a splinter ...

    Re: Entering the entry door Business
    A message posted at WOODWEB's Architectural Woodworking Forum (7/26) -- David, I have great respect for your work. with that said, I am a commercial/ ...

    Re: turbocad v8 mac
    A message posted at WOODWEB's CAD Forum (7/26) -- Hey Tim, I have tried to use Mac for professional level cad/cam results for a number of years but r ...

    Re: Failed glue joint
    A message posted at WOODWEB's Furniture Making Forum (7/26) -- It is the stiles at the corners that caused the miter joint to fail. The width of the ...

    Re: Failed glue joint
    A message posted at WOODWEB's Furniture Making Forum (7/26) -- I cannot see how the deck is made, or grain, or solid or veneer or ? But, the two vert ...

    Re: Entering the entry door Business
    A message posted at WOODWEB's Architectural Woodworking Forum (7/26) -- "No disrespect intended, but this is a little bit like a bird house buil ...

    Re: Solar kiln : Leave Circulation fans on after sunset
    A message posted at WOODWEB's Sawing and Drying Forum (7/26) -- We do want to achieve 100% RH with lumber so that we remove a small amount of drying ...

    Re: Entering the entry door Business
    A message posted at WOODWEB's Architectural Woodworking Forum (7/26) -- A follow-up question I just thought of. What software is available for simple ...

    Re: Failed glue joint
    A message posted at WOODWEB's Furniture Making Forum (7/26) -- Yep, is the top built like a raised panel door or is it just a slab? With widths like ...

    Re: Failed glue joint
    A message posted at WOODWEB's Furniture Making Forum (7/26) -- Not wishing to be unhelpful, but that is not a "failed glue line" nor a &quo ...

    Re: Teak Talk
    A message posted at WOODWEB's Forestry Forum (7/26) -- Its funny (to me ) that this post appears today. i pulled into my drive last night with a trai ...

    Bullnose $
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/26) -- What is the standard upcharge for a 1-1/2" Laminate bullnose front ...

    Using Vacuum Forming Table to Heat Bend Soild Surface
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/26) -- I know this is a bit unconventional, but we are trying to heat bend 1/2& ...

    Re: burning saw dust
    A message posted at WOODWEB's Value Added Wood Processing Forum (7/26) -- i think a bucket of water mixed with a small amount of flower would make a ...

    Re: Hemlock board cupped at one end
    A message posted at WOODWEB's Sawing and Drying Forum (6/26/23) -- sounds like you got a MC imbalance OR it wasn't as dry as you expected. A lot of v ...

    Kremlin Original AirMix Spray Tips or Aftermarket?
    A message posted at WOODWEB's Finishing Forum (6/26/23) -- I want to check with the group to see if anybody has noticed any differences between the f ...

    Re: cnc tool holders thread direction vs spindle rotation
    A message posted at WOODWEB's CNC Forum (6/26/23) -- We sell both rh and lh cnc tool holders U can also purchase a holder with a bearing nut and that ...

    Re: cnc tool holders thread direction vs spindle rotation
    A message posted at WOODWEB's CNC Forum (6/26/23) -- I only have one left handed tool in a regular tool holder that isn't used often. I'd assume prop ...

    Re: Kremlin Original AirMix Spray Tips or Aftermarket?
    A message posted at WOODWEB's Finishing Forum (6/26/23) -- I buy CAT tips which are $10-20 cheaper than the Kremlin tips. They don't snap into the ca ...

    Re: dust collection
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/26/23) -- So many variables here. What are you making? How much fine dus ...

    cnc tool holders thread direction vs spindle rotation
    A message posted at WOODWEB's CNC Forum (6/26/23) -- New cnc owner my question is that the thread rotation on 1 tool holder left handed, I would assu ...

    Re: cnc tool holders thread direction vs spindle rotation
    A message posted at WOODWEB's CNC Forum (6/26/23) -- LH tool holders are for LH routerbits. Safer to run than putting a LH tool in a RH holder. Typic ...

    Re: finishing
    A message posted at WOODWEB's Finishing Forum (6/26/23) -- Not enough info...what type of finish was or is on there now.? Is it a pigmented finish or ...

    Re: Kremlin Original AirMix Spray Tips or Aftermarket?
    A message posted at WOODWEB's Finishing Forum (6/26/23) -- I bought some Kremlin after-market tips and they were not great, one didn't work at all. I ...

    dust collection
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/26/23) -- Im interested in finding out more about what everyone uses for ...

    adhesive advice
    A message posted at WOODWEB's Adhesives Forum (6/26/23) -- Whats the best adhesives to use for a large project of industrial cabinets . Looking for a ...

    finishing
    A message posted at WOODWEB's Finishing Forum (6/26/23) -- Looking for advice on finishing. what is best to use for repainting an art deco dressing t ...

    cleaning wood
    A message posted at WOODWEB's Finishing Forum (6/26/23) -- What is a good tool to powerwash furniture before painting ? ...

    Re: cleaning wood
    A message posted at WOODWEB's Finishing Forum (6/26/23) -- I usually get a 5 gallons bucket of elbow grease ...

    Re: cleaning wood
    A message posted at WOODWEB's Finishing Forum (6/26/23) -- A power washer! ...

    Re: cleaning wood
    A message posted at WOODWEB's Finishing Forum (6/26/23) -- None ...

    Re: Am I wrong to expect a Drawer Supplier to finish the entire drawer?
    A message posted at WOODWEB's Cabinetmaking Forum (6/26/22) -- Joseph, I had a similar experience many years ago when we started outsourcing drawers. ...

    Re: Long drill bits
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- As a suggestion, since wood grain can misdirect long drill bits, is to plough l ...

    Re: Long drill bits
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- What type of drilling? You mean like auger style bits? The application (doesnt ...

    Re: Long drill bits
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- Not an auger bit, I do a lot of work on wood doors and I need to drill across t ...

    Re: Long drill bits
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- If the shank is stiff and the grind is accurate and sharp even a bit of gnarly ...

    Re: Long drill bits
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- You may try searching for "bell hanger bits". The stiff shank version ...

    Re: Long drill bits
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- The jig clamps the the edge of the door and the bit goes through a bronze bushi ...

    Re: Flex hose for CNC, everything is splitting in less than a year
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/26/22) -- Wynn Environmental sells really nice, heavy duty polyurethane ...

    Re: Thermofoil
    A message posted at WOODWEB's Cabinetmaking Forum (6/26/22) -- How about doing a thermafoil (IKEA) Kitchen . Except having a portion above the stove ...

    Long drill bits
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- I am looking for a source for 24 and 36 inch drill bits, specifically 1/2" ...

    Re: Long drill bits
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- Doors are already made and I use a jig that does a pretty good job of keeping t ...

    Re: Long drill bits
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- Ahh, I wondered. You can source standard 36" twist drills easily but I thi ...

    Re: Long drill bits
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- Assumption was OP is working on completed doors not fabricating and drilling af ...

    Re: Long drill bits
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- I 2nd Rich on this, I've seen long bits got deterred by grain direction or othe ...

    Re: Long drill bits
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- How does a jig help when the end of the bit if 3' away? ...

    Re: Long drill bits
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- https://www.gmesupply.com/bell-hanger-wood-bit-(12x36) ...

    Re: Motor brake for table router.
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26/22) -- stepper motor? ...

    Re: Pump selection
    A message posted at WOODWEB's Finishing Forum (6/26) -- I'm using a Graco Merkur ES 30:1 pump, 1'8" ID fluid hose. There's 2 CAT 14:1 pumps next ...

    Re: RF gluer shuts down
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- Having had a rf glue machine in the dim past there are a few things you could check. Is t ...

    Re: CV as opposed to 2K poly for tops
    A message posted at WOODWEB's Finishing Forum (6/26) -- Ok thanks I am going to look into it I do have some questions about 2K poly I never used it b ...

    Re: CV as opposed to 2K poly for tops
    A message posted at WOODWEB's Finishing Forum (6/26) -- Mastercabman, If you want a "bullet proof" topcoat try using a 2K polyester. Super ...

    Re: Design corner cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- I make mine square in the back corner, 45 degree was a pain. The end panels are standard ...

    Re: CV as opposed to 2K poly for tops
    A message posted at WOODWEB's Finishing Forum (6/26) -- Arroyo is a waterbase finish. It's thick, 50 seconds through a Ford #4 cup. Maximum dry film ...

    Re: CV full curing time
    A message posted at WOODWEB's Finishing Forum (6/26) -- My information comes from Akzo-Nobel.....CV cure times is like this, 80% cure within the firs ...

    Re: How the heck can I give pricing?
    A message posted at WOODWEB's Business and Management Forum (6/26) -- We don't give prices. We give budget ranges based on today's material costs. Or ...

    Re: Tablesaw Blades
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- Ken, I am still using an old stack Systematic dado blade from the early 90's. Best dado b ...

    Re: CV as opposed to 2K poly for tops
    A message posted at WOODWEB's Finishing Forum (6/26) -- To answer your question of "how comfortable would you be using CV on a top that is going ...

    Re: RF gluer shuts down
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- If you have a schematic, a good tech of any sort should be able to trace the problem. Jus ...

    Re: Design corner cabinets
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- Note it is 12" deep so this is a wall cab , no need for the clip to get through door ...

    Re: Pump selection
    A message posted at WOODWEB's Finishing Forum (6/26) -- i found the Graco Merkur ESpump to have such a small fluid section the that darn thing pump a ...

    Re: CV as opposed to 2K poly for tops
    A message posted at WOODWEB's Finishing Forum (6/26) -- I spray 2 k urethane from Ilva. I normally use a kremlin 10-14 AAA but I sometimes use a basi ...

    Re: CV as opposed to 2K poly for tops
    A message posted at WOODWEB's Finishing Forum (6/26) -- Never heard of a 2K polyester. Always thought they were 3K. What's the brand and name? ...

    Re: custom handrail parts supplier
    A message posted at WOODWEB's CNC Forum (6/26) -- You might try David R Sochar at Acorn Woodworks ...

    Re: Too much time estimating
    A message posted at WOODWEB's Business and Management Forum (6/26) -- These our our broad brush steps when we determine whether to bid or not. There ...

    Re: Phones, Bathroom,.... Again I know..
    A message posted at WOODWEB's Business and Management Forum (6/26) -- When I was in the army some of the facilities were equipped with squat toilets ...

    Re: Dedicated dowel or biscuiting machine, suggestions?
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- Maybe not exactly what you're asking for, but the Versidex table is the first (and least ...

    Re: Too much time estimating
    A message posted at WOODWEB's Business and Management Forum (6/26) -- Joe, The danger with giving a rough estimate is that the low number sticks in t ...

    Re: Type II pva and Western red cedar
    A message posted at WOODWEB's Adhesives Forum (6/26) -- I've been making cedar signs with WRC for almost 20 yrs. I use LePages "Outdoor Weatherp ...

    Re: Vises
    A message posted at WOODWEB's CNC Forum (6/26) -- The way we do it most of the time is screwing a closed grain board to the bottom of it, just make s ...

    Re: Vises
    A message posted at WOODWEB's CNC Forum (6/26) -- The little pod and rail is a Rover 20. I also have 2 flat table Biesse Arrows and I'm setting one u ...

    Re: New Dust Collection Design
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/26) -- I can help you out with this Steve. Go to my website, check out t ...

    Re: Best bit style for panel sizing
    A message posted at WOODWEB's CNC Forum (6/26) -- I still don't understand we get better edges from our panel saw than an edge on a router. why do yo ...

    Re: Preparing SYP logs for hand hewing?
    A message posted at WOODWEB's Sawing and Drying Forum (6/26) -- Talk to the guy on the show Barn Wood Builders..Mark Bowe I think is his name. They h ...

    Re: Dedicated dowel or biscuiting machine, suggestions?
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- I would avoid Pillar Machine. If you want details PM me. ...

    Re: Best bit style for panel sizing
    A message posted at WOODWEB's CNC Forum (6/26) -- In some instances we can't even be 1mm out of square so we want to square the panel up. ...

    Re: Vises
    A message posted at WOODWEB's CNC Forum (6/26) -- Here's a picture, wasn't sure if I had one. Pretty sure they're Holzher WS- 6 if I remember right ...

    Re: Best bit style for panel sizing
    A message posted at WOODWEB's CNC Forum (6/26) -- How many axis machine is this pod and rail, 3 or 5? ...

    Re: Vises
    A message posted at WOODWEB's CNC Forum (6/26) -- Here's a quick video from yesterday's runs, I hope you can see it well enough ...

    Re: Vises
    A message posted at WOODWEB's CNC Forum (6/26) -- I was going to say cocaine and hookers.... VISES, not vices.... ...

    Re: Vises
    A message posted at WOODWEB's CNC Forum (6/26) -- Hi Ian. Can't see the video for some reason. ...

    Re: Vises
    A message posted at WOODWEB's CNC Forum (6/26) -- Thanks Ian. Any pics of the pneumatic vises? ...

    Re: Best bit style for panel sizing
    A message posted at WOODWEB's CNC Forum (6/26) -- Good idea mark ...

    Re: Vises
    A message posted at WOODWEB's CNC Forum (6/26) -- Thanks. Just what I was looking for. ...

    Re: Vises
    A message posted at WOODWEB's CNC Forum (6/26) -- What machine are you running? ...

    Re: Best bit style for panel sizing
    A message posted at WOODWEB's CNC Forum (6/26) -- 3. ...

    Re: Certifications
    A message posted at WOODWEB's Business and Management Forum (6/26) -- FSC has value if you are doing LEEDS projects or working for companies that wan ...

    Re: Cherry / Maple Project
    A message posted at WOODWEB's Architectural Woodworking Forum (6/26) -- BH, I have always avoided design like the Plague, Kinda a You goota live with ...

    Re: Cherry / Maple Project
    A message posted at WOODWEB's Architectural Woodworking Forum (6/26) -- Years ago I made a blanket box from cherry with a bird's eye maple lid panel. ...

    Re: Woodtek Wide belt sander
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- I've had to do this a few times during the 25 years I've had my sander. Take a new belt ( ...

    Re: wide belt sander
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- CW is right. Everything in the shop is now electronically controlled. OEM parts are usual ...

    Re: Tabu veneer
    A message posted at WOODWEB's Veneer Forum (6/26) -- Hi, Correct, we do not sell or stock edgeband. We have 555 colors and with all the variables tha ...

    Woodtek Wide belt sander
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- I'm looking for replacement parts for my Woodtek 36 inch wide belt overhead sander. Does ...

    Re: Salice hinge & plate
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- HI Bob, One solution would be to use an inset hinge with a 6mm mounting plate and a 6mm e ...

    Re: Cherry / Maple Project
    A message posted at WOODWEB's Architectural Woodworking Forum (6/26) -- Tom reminded me that it is better to have a focal point. A painting will have ...

    Re: Selco Mechanic Charlotte NC area
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- Ahhh He did such a good Job for Us a couple of years ago that the machinery has needed No ...

    Re: Cherry / Maple Project
    A message posted at WOODWEB's Architectural Woodworking Forum (6/26) -- Cherry and Maple age nicely together, just like the Ash and Walnut. I built 1 ...

    Re: Woodtek Wide belt sander
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- There are places that recover them. If it isn't in too bad of shape you can dress it by g ...

    Re: Woodtek Wide belt sander
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- Hi Larry, Just take the belt off and run the abrasive sheet through and take off maybe a ...

    Re: Selco Mechanic Charlotte NC area
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- unfortunately Johann is no longer independent. He can't work on other machinery. ...

    Re: Certifications
    A message posted at WOODWEB's Business and Management Forum (6/26) -- OSHA Hazard Training might be required on government jobs ...

    Re: Salice hinge & plate
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- Thank you Dennis. I will get them ordered. ...

    Re: Cherry / Maple Project
    A message posted at WOODWEB's Architectural Woodworking Forum (6/26) -- aka The Hippie Sandwich ...

    Re: MLC Magnamax H2O Precat Water Borne Poly
    A message posted at WOODWEB's Finishing Forum (6/26) -- I just finished a large job with MagnaMax H20 and learned a lot. I used both Aqualente and Sh ...

    Re: tools from the past
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- Thanks for all the stories, I am always coming across cool stuff as I read the classified ...

    Re: Shipping
    A message posted at WOODWEB's Business and Management Forum (6/26) -- Matt We use a company that is also a Mayflower rep as well as Tabatha Beltramo ...

    Re: Repairing an exterior door gouge
    A message posted at WOODWEB's Finishing Forum (6/26) -- Quality touch-up person should be able to handle that with no problem..... fill , shape and s ...

    Re: Shipping
    A message posted at WOODWEB's Business and Management Forum (6/26) -- I have shipped to Southeast Alaska, Juneau. We did not crate it. We did box eve ...

    Smallest field spray setup. Post cat.
    A message posted at WOODWEB's Finishing Forum (6/26) -- I am trying to put together the smallest spray touch-up kit I can. My manufacturer uses post- ...

    Re: introducing a business partner
    A message posted at WOODWEB's Business and Management Forum (6/26) -- I had actually worked on a construction crew and that company had 2 owners. Fro ...

    Re: polishing CV
    A message posted at WOODWEB's Finishing Forum (6/26) -- You are right JM customers change their minds. Even though they signed off on Dull sheen it w ...

    Re: Adding Texture to .STL file
    A message posted at WOODWEB's CAD Forum (6/26) -- Sorry about the delay. Here is the image I want to use plus the STL file. I had to rename as a.jpg ...

    Re: Batch Rotating DXF files
    A message posted at WOODWEB's CAD Forum (6/26) -- Richard, Do you have any experience with Lisp routines? Someone in the know could make that work I' ...

    Re: polishing CV
    A message posted at WOODWEB's Finishing Forum (6/26) -- Put 3 more coats of CV on it in gloss sheen. You're going to need it if you want to polish to ...

    Re: Repairing an exterior door gouge
    A message posted at WOODWEB's Finishing Forum (6/26) -- Its a gouge not a dent. Steam won't work. If it was paint grade bondo would be the go. Shane ...

    Re: Drawing Compound radius moulding
    A message posted at WOODWEB's CAD Forum (6/26) -- Yes, It looks to me like 5 sections through a 180° arc gets me close enough. Most curved walls will ...

    Re: Removing 5 axis spindle For repair
    A message posted at WOODWEB's CNC Forum (6/26) -- Can't be that hard. Everything out in the open. Get a manual. Take lots of pics. Make sure you bloc ...

    Re: Removing 5 axis spindle For repair
    A message posted at WOODWEB's CNC Forum (6/26) -- Sorry I don't have anything for you. That I would imagine is complex. Putting it back on is likely ...

    Re: Cabinet design program options
    A message posted at WOODWEB's CAD Forum (6/26) -- I second Ryan's response with Mozaik. Its affordable and does a nice job. Has a great forum also. ...

    Re: Removing 5 axis spindle For repair
    A message posted at WOODWEB's CNC Forum (6/26) -- do you know anyone or have you ever taken out the motor. the bearings are damaged ...

    Re: Removing 5 axis spindle For repair
    A message posted at WOODWEB's CNC Forum (6/26) -- yes I am still waiting for a tech. I was told about 2 weeks. ...

    Re: Removing 5 axis spindle For repair
    A message posted at WOODWEB's CNC Forum (6/26) -- Nice. I shy away from stiles now. Things changed. ...

    Re: Removing 5 axis spindle For repair
    A message posted at WOODWEB's CNC Forum (6/26) -- Have you called Stiles? ...

    Dark Stain on Wire Brushed Oak
    A message posted at WOODWEB's Finishing Forum (6/26) -- I am trying to match the finish of engineered hardwood floors on our solid oak stair treads. ...

    Re: Trying to veneer a mini fridge
    A message posted at WOODWEB's Veneer Forum (6/26) -- In the late 19th Century, the industrial revolution arrived in the wood shop and large slicers c ...

    Forced (heat) curing, small batches.
    A message posted at WOODWEB's Finishing Forum (6/26) -- Good afternoon folks, I'm curious, we are at a point where some heat forced curing (conversio ...

    Re: Cleaning Poplar for tinted lacquer
    A message posted at WOODWEB's Finishing Forum (6/26) -- It is coming together! This pic is a two surfacer coats and lacquer tack coat and one full co ...

    Re: installing painted 1 piece mdf doors in new construction before A/C
    A message posted at WOODWEB's Finishing Forum (6/26) -- You warehouse doesn't have curing concrete in the basement, curing plaster on the walls, and ...

    Re: Solvent recycling worth it?
    A message posted at WOODWEB's Finishing Forum (6/26) -- Thanks for the input guys. We had the same concerns that JM brought up. At least I know now t ...

    Cleaning return air
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/26) -- Recently installed a 16,000 cfm collector in my shop. how do I re ...

    installing painted 1 piece mdf doors in new construction before A/C
    A message posted at WOODWEB's Finishing Forum (6/26) -- we have a large home where we have already installed cabinets for laundry,kitchen and bathroo ...

    Re: Metallic Gold Spray Paint
    A message posted at WOODWEB's Finishing Forum (6/26) -- Make sure you don't sand the MDF too slick, especially the flat surfaces. I know you have to ...

    Re: Overspray
    A message posted at WOODWEB's Finishing Forum (6/26) -- It is very tricky to remove overspray with the 'brown paper bag' method. Raising the sheen le ...

    Re: installing painted 1 piece mdf doors in new construction before A/C
    A message posted at WOODWEB's Finishing Forum (6/26) -- we didnt install. just getting advice. just spoke to the finisher that sprayed the doors. he ...

    Re: Mayer Saw running Ardis Optimizer
    A message posted at WOODWEB's CNC Forum (6/26) -- Thanks for the reply. It seems like that is the problem. What format is the license file? I install ...

    Re: Cleaning Poplar for tinted lacquer
    A message posted at WOODWEB's Finishing Forum (6/26) -- I might add that through trial and error a few coats were sanded a little heavy handed which ...

    spraying latex paint
    A message posted at WOODWEB's Finishing Forum (6/26) -- I am wanting advice on spraying latex paint. I am using a Graco hvlp sprayer ( 7.0 with edge ...

    Re: Dark Stain on Wire Brushed Oak
    A message posted at WOODWEB's Finishing Forum (6/26) -- I think Rich is on to it. Try a medium brown/black stain (mission oak), thin as necessry to g ...

    Re: making my own cabinet jack
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/26) -- My most humble apology sir. I too have built one out of wood. It was ...

    Re: installing painted 1 piece mdf doors in new construction before A/C
    A message posted at WOODWEB's Finishing Forum (6/26) -- I would not have installed. Humidity is very high there anyway, then add in all the gallons a ...

    Re: Metallic Gold Spray Paint
    A message posted at WOODWEB's Finishing Forum (6/26) -- I went and got the yellow "Frog Tape" and that seems to have worked......also, I ac ...

    Re: Cleaning return air
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/26) -- If the cyclone and bags are doing the job correctly, nothing else ...

    Enviromax by MLC
    A message posted at WOODWEB's Finishing Forum (6/26) -- Anyone have experience with MLC Enviromax? That's the pre-cat version I'm thinking of trying ...

    Re: Dark Stain on Wire Brushed Oak
    A message posted at WOODWEB's Finishing Forum (6/26) -- Get the color of the stain and make sure you have some gilsonite in it. the gilsonite is what ...

    Re: Favorite downgrade from undermounts
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- full extension side mounts . Richelieu has their own knock off of the blum undermount whi ...

    Re: spraying latex paint
    A message posted at WOODWEB's Finishing Forum (6/26) -- you are simply under-powered. When it comes to latex paint; an airless with a fine finish tip ...

    Re: Overspray
    A message posted at WOODWEB's Finishing Forum (6/26) -- We use 0000 steel wool. Be careful, you may get a little higher sheen. Go lightly and feather ...

    Re: installing painted 1 piece mdf doors in new construction before A/C
    A message posted at WOODWEB's Finishing Forum (6/26) -- House has all floors tiled and walls are already painted. Just waiting for air. ...

    Re: Dark Stain on Wire Brushed Oak
    A message posted at WOODWEB's Finishing Forum (6/26) -- You might want to try a lighter stain, clear seal coat, then glaze. I haven't done it, just a ...

    Re: Cleaning Poplar for tinted lacquer
    A message posted at WOODWEB's Finishing Forum (6/26) -- Thanks Chris! I have buffed a few boats but have always heard nightmares with clears and lacq ...

    Re: Cleaning Poplar for tinted lacquer
    A message posted at WOODWEB's Finishing Forum (6/26) -- dont use a buffer until finish has cured. for a pre cat i would wait at least a couple of wee ...

    Re: making my own cabinet jack
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/26) -- I'm skeptical that it is worth the trouble, just buy one if it is rea ...

    Re: Interesting Read
    A message posted at WOODWEB's Business and Management Forum (6/26) -- Interesting read, funny! ...

    Re: Overspray
    A message posted at WOODWEB's Finishing Forum (6/26) -- I'm with Rich, Mirka Mirlon. ...

    Re: Tracking Jobs
    A message posted at WOODWEB's Business and Management Forum (6/26) -- We use a combo of Trello and Dropbox. Currently tracking 40 some projects. On p ...

    Beaded Inset Door Thickness & Non-Mortise Hinges
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- Working on a kitchen with beaded inset doors and drawers. After picking up rough and mill ...

    Insurance?
    A message posted at WOODWEB's Business and Management Forum (6/26) -- Another year has passed by and it's time to review my insurance... I'm hoping f ...

    Re: Fitting a very thick slab?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/26) -- 1.Unless I'm missing something just set up a straight edge and cut it ...

    Re: Insurance?
    A message posted at WOODWEB's Business and Management Forum (6/26) -- That is about what I pay here in GA. $1575 per quarter. Very close to same cove ...

    Re: Fitting a very thick slab?
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (6/26) -- That is a tough one. I think I would turn it upside down and cut a ra ...

    Re: grain match
    A message posted at WOODWEB's CAD Forum (6/26) -- Thank you Bob and Jonah, I prefer the manual setting and that's why the Auto-Group is always turned ...

    Re: Beaded Inset Door Thickness & Non-Mortise Hinges
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- I recently used the Horton Brasses hinges they don't wrap so it will work. They are very ...

    Re: Beaded Inset Door Thickness & Non-Mortise Hinges
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- Because those wrap 7/8" stock won't work unless you feel like making a routing jig t ...

    Re: grain match
    A message posted at WOODWEB's CAD Forum (6/26) -- No, you can manually select grain match group as the original poster indicated. Probably your mater ...

    Re: Source for plywood cylinders
    A message posted at WOODWEB's Veneer Forum (6/26) -- Check with North Creek Woodworks. They specialize in custom veneered products including cylinder ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/26) -- Harold---oh yes :) That is the stuff that makes a life. Several generations of ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/26) -- Mel, You are a fairly smart and engaged person. Most people on this forum and p ...

    Re: elliptical templates
    A message posted at WOODWEB's Architectural Woodworking Forum (6/26) -- If you want to use the string method to get in the ball park with a template, ...

    Re: elliptical templates
    A message posted at WOODWEB's Architectural Woodworking Forum (6/26) -- Quick question, why don't you trace around the template you created to get th ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/26) -- Mel, as an ex montreal, i was told to suck it up and take a 30% drop in pay whe ...

    Magnamax or Resistant
    A message posted at WOODWEB's Finishing Forum (6/26) -- Hello All We have been using Magnamax for the last 5 years, but once and while we came across ...

    Re: Using PVA with HPL
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/26) -- Most of those questions can and should be answered by your glue supplier ...

    Too much dust collection?
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (6/26) -- My shop is a small, 2500as/ft, two man shop. I'm currently runnin ...

    Re: Walnut photo sensitivity
    A message posted at WOODWEB's Furniture Making Forum (6/26) -- Walnut is very light sensitive, both in lumber and veneer form. It's not likely to san ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/26) -- Could be that they need a capable person at this station and you were it . Your ...

    Re: edgebander tape roll finish sensor
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- We installed a photo switch that the edging runs thru. when it runs out the piston that p ...

    Re: lamello zeta machine and hardware
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- Thanks Guys, Well, i bit the bullet and ordered one and 300 pr of the connectors. I have ...

    Re: lamello zeta machine and hardware
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- You'll find you go through 300 pretty quick. I also use the connections that snap togethe ...

    Re: Using PVA with HPL
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/26) -- Ideally you will need a panel cleaner and glue spreader. Panel cleaner p ...

    Re: lamello zeta machine and hardware
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- Hello, I bought one about six months back and continually find uses for it. I find it exc ...

    Laminating for panels and cabinet doors
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/26) -- Hi, We are purchasing a nesting table and edge bander for production of ...

    Routed MDF Doors
    A message posted at WOODWEB's CNC Forum (6/26) -- Hi, I am trying to do a feasability study for purchasing a Homag Vantage 200 nesting table for prod ...

    Re: Loox lighting system
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- We like the Loox LED lighting from Hafele for it's versatility, quality and price. The 24 ...

    Re: Clear on copper
    A message posted at WOODWEB's Finishing Forum (6/26) -- Ed, My first choice would be to take the copper to a powder coater and have them clear coat i ...

    Excel fraction w/ "
    A message posted at WOODWEB's WOODnetWORK Forum (6/26) -- I've been searching google all day and I am not finding what I need. Excel is so close but ...

    Red Oak for Barn Siding
    A message posted at WOODWEB's Sawing and Drying Forum (6/26) -- I will be using White Oak and Post Oak for the poles and Red Oak for the Batt and Boa ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/26) -- You are an employee and they are an employer. They pay you to do tasks of their ...

    Re: Attaching large square table top
    A message posted at WOODWEB's Furniture Making Forum (6/26) -- I have a 6' square dining table that I built in my dining room. Its about 7 years old, ...

    Re: RITTER R26
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- i have a detel 44 spindle model that has pins,but also has flip stops. As someone else me ...

    Re: Vegas or Bust Update
    A message posted at WOODWEB's Business and Management Forum (6/26) -- Bill, Send me your current contact information at bbuckleyt32@gmail.com and I w ...

    Re: Loox lighting system
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- I was told the 12v is more an accent light and the 24v more a task light. Does anyone kno ...

    Re: Laminating for panels and cabinet doors
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/26) -- Yes, I will be laminating both sides using the single sided machine. I w ...

    Vcarve and Weeke
    A message posted at WOODWEB's CNC Forum (6/26) -- Is anyone using Vcarve and Weeke Woodwop 4.0. We have a project with some artwork than needs to be ...

    Re: cabinet pro
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- Hands down. Cabinet vision and mozaik are the way to go. I have both of them and am reall ...

    Re: Clear on copper
    A message posted at WOODWEB's Finishing Forum (6/26) -- I did google first, came up with several options. Asking here to see if anyone has 1st hand i ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/26) -- I do the work more then fine. "Just" do the work--like don't think ab ...

    Re: anyone ever charred wood for perseving aka Shou sugi ban
    A message posted at WOODWEB's Sawing and Drying Forum (6/26) -- Don't know anything about charring to preserve jaycee but I sure do like it's appeara ...

    Re: lamello zeta machine and hardware
    A message posted at WOODWEB's Cabinetmaking Forum (6/26) -- I have had mine for about a year, it's a great tool.Like mentioned above, it makes angled ...

    Re: Everyone is an idiot, apparently?
    A message posted at WOODWEB's Business and Management Forum (6/26) -- Why do I have to read this cr.... constantly. Can't you just work? And contain ...

    Re: Clear on copper
    A message posted at WOODWEB's Finishing Forum (6/26) -- Sherwin Williams Opex® Clear Lacquer Or Bronzing Lacquer Opex® Clear Bronzing Lacquer is desi ...

    BOM's and cutlists
    A message posted at WOODWEB's WOODnetWORK Forum (6/26) -- Anybody willing to share a sample BOM and or just your cutlist? I'm interested in what it l ...

    Re: Laminating for panels and cabinet doors
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/26) -- Why single sided don't you need to balance the panels with laminate on b ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/26) -- None of that is relevant to my post about just doing the work. ...

    Re: Magnamax or Resistant
    A message posted at WOODWEB's Finishing Forum (6/26) -- CV! That's all I can say Every cabinet manufacturer that I install uses CV ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/26) -- I am woodworker... ...therefore I sand. ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/26) -- To Leo , I sand therefore I am ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/26) -- How could what I'm saying be true? ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/26) -- Then explain it better. ...

    Re: Getting shoehorned into a repetitive task
    A message posted at WOODWEB's Business and Management Forum (6/26) -- You still don't get it. ...

    Re: Veneering a mdf raised panel
    A message posted at WOODWEB's Veneer Forum (6/26) -- Those type of panels are made with a membrane press to force the veneer down into the coves. I t ...

    Veneering a mdf raised panel
    A message posted at WOODWEB's Veneer Forum (6/26) -- I have extra lg. panels to create and would like to use the method of a mdf substrate w/ a cove ...

    Re: shelix problem--
    A message posted at WOODWEB's Solid Wood Machining Forum (6/26) -- I have not heard of anyone getting the entire head exactly the way it was when the ...

    Storing wood rounds/slices
    A message posted at WOODWEB's Sawing and Drying Forum (6/26) -- Hi all! I am getting into cutting large rounds/slices from hardwood. Is it ok to stor ...

    Re: Veneering a mdf raised panel
    A message posted at WOODWEB's Veneer Forum (6/26) -- Well that's not good news. Thanks for the feedback. You rang a bell. I do remember seeing a shop ...

    1/4 thick panels
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/26) -- i need to make 1/4 inch thick laminated sliding panels (12 x 18 inch) to ...

    aluminum
    A message posted at WOODWEB's Adhesives Forum (6/26) -- I want to adhere 0.04 aluminum photo print to furniture grade plywood or mdf (with edgebading ...

    Microvellum custom moulding and door styles
    A message posted at WOODWEB's CAD Forum (6/26) -- anyone using Microvellum on here knows how to import custom moulding profiles and door/drawer style ...

    Re: Veneering a mdf raised panel
    A message posted at WOODWEB's Veneer Forum (6/26) -- You could make the Cove a separate piece, hold it down about 1/16", to create a step in the ...

    Re: Veneering a mdf raised panel
    A message posted at WOODWEB's Veneer Forum (6/26) -- Rather not. A whole face veneer will finish much better and uniformly. Thanks for the suggestion ...

    Re: Veneer from Marquetry?
    A message posted at WOODWEB's Veneer Forum (6/26) -- Not to get off the subject. What kind of laser is that your using on your website ? ...

    Re: laminate substrates
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/26) -- thanks for the feedback ...

    Re: Laminating Beams Advice
    A message posted at WOODWEB's Adhesives Forum (6/26) -- There are two issues that need to be addressed. First is the strength of the wood. Although y ...

    Re: undermoutsink on SS
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/26) -- You have probably finished your counter top. Dark colors can be tough if ...

    2020 design catalog tools
    A message posted at WOODWEB's CAD Forum (6/26) -- I want to learn how to make my own catalog with 2020 design program, is there a tutorial available ...

    Re: who owns a design?
    A message posted at WOODWEB's Furniture Making Forum (6/26) -- Send me a copy of the design and I'll uh... look it over for you. Yeah, that's right I ...

    Re: Laminating Beams Advice
    A message posted at WOODWEB's Adhesives Forum (6/26) -- Some pretty impressive work on your site Joe. ...

    Wa H2o?
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (6/26) -- I normally use fastbond nf 30 but $$$$ can anyone tell me if H2o is like ...

    Shelf pin holes
    A message posted at WOODWEB's Cabinetmaking Forum (5/26/23) -- I recently purchased a used 13 spindle line drill to drill our shelf pin holes. I boug ...

    Re: Curved cabinet top
    A message posted at WOODWEB's Cabinetmaking Forum (5/26/23) -- I press almost exclusively with PVA. Call me stubborn or cheap but I rarely have a glu ...

    Re: Shelf pin holes
    A message posted at WOODWEB's Cabinetmaking Forum (5/26/23) -- It could just be the batch of pins that you got are slightly smaller. I have noticed v ...

    Re: Curved cabinet top
    A message posted at WOODWEB's Cabinetmaking Forum (5/26/23) -- You will have less spring back with plastic resin glue ...

    Re: Curved cabinet top
    A message posted at WOODWEB's Cabinetmaking Forum (5/26/23) -- Based on my experience I agree with Tom. ...

    Re: Festool Belt Dander
    A message posted at WOODWEB's Cabinetmaking Forum (5/26/23) -- Thanks Karl, I'll look into it! ...

    Live Oak Sandbox - Rot Resistance and Drying
    A message posted at WOODWEB's Sawing and Drying Forum (5/26/22) -- I am building a live oak sandbox for my kids, due to its rot resistance, but have ...

    Drying wood in a tropical climate
    A message posted at WOODWEB's Sawing and Drying Forum (5/26/22) -- I am in Thailand, where the RH on a normal day ranges from 45% to 80%, which IMHO ...

    Re: Inset doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/26/22) -- We break the edges for finishing. 150 grit with a block. The corners we round over a b ...

    Re: CNC Error
    A message posted at WOODWEB's CNC Forum (5/26/22) -- It's possible to restart matchining without restoring the machine ...

    Re: Inset doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/26/22) -- Sounds good that’s what I will do thanks ...

    Re: Who is stupid busy?
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Commercial side here has gone very quiet past couple months. Most of the large ...

    Re: Who is stupid busy?
    A message posted at WOODWEB's Business and Management Forum (5/26) -- We are over- committed until Sept or October. Complicating things are two open- ...

    Re: Straining gallon plus size
    A message posted at WOODWEB's Finishing Forum (5/26) -- If your WB finish is heavy bodied the best thing Ive found is to order medium mesh or coarse ...

    Re: Point Cloud Software Choices
    A message posted at WOODWEB's CAD Forum (5/26) -- I've been using this technology for quite some time now with great success. From massive commercial ...

    Low profile slotter
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- I need to run a horizontal slot, about 1/16" thick x 1/4" to 3/8&qu ...

    Re: Who is stupid busy?
    A message posted at WOODWEB's Business and Management Forum (5/26) -- we're in a niche market, serving personal residences (no commercial work). busi ...

    Re: Maybe a dumb question?
    A message posted at WOODWEB's Finishing Forum (5/26) -- All "Cat" finish's have a "crosslinking" acid that causes "Crosspoly ...

    Who is stupid busy?
    A message posted at WOODWEB's Business and Management Forum (5/26) -- What a challenging year. There is nothing about the last 12+ months that has be ...

    Re: Cope and stick reversible
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- Hen Bob is right. You can even get ground to pattern bits that will reverse f ...

    Re: cabinet door machinery
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- I use a unique 250 door machine, with insert tooling. The only draw back is when the door ...

    Re: Straining gallon plus size
    A message posted at WOODWEB's Finishing Forum (5/26) -- Also,.. glanced in the cabinet after post and forgot that as much as it makes me throw up in ...

    Straining gallon plus size
    A message posted at WOODWEB's Finishing Forum (5/26) -- As the new owner of a CAT Cougar H2O I'm facing a learning curve. One of the first issues is ...

    Re: Cope and stick reversible
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- I used Green mountain for a door last year per David's recommendation. They d ...

    Re: RE: Best Chainsaw for Ripping Logs
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- Heavy slabs and flitches are just part of sawing. If you have the capacity to handle ...

    Safety Spped Cut Dado Setup
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- Just purchased a used ssc router table horizontal version ,for dado's trying to figure ou ...

    Re: Low profile slotter
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- Yes......multi tool comes to mind. But even the Dremel, which is pretty small ...

    Re: HPL to HPL Adhesive advice
    A message posted at WOODWEB's Adhesives Forum (5/26) -- Tom, Epoxy for sure does not work and I think PPL is about the same result. Did some expeimen ...

    Re: Low profile slotter
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- I wish we were able to edit posts here. On a second reading I noticed that I ...

    Re: Who is stupid busy?
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Stupid buddy is accurate. Busier than I want, but it'smiddle stupid projects. I ...

    Re: HPL to HPL Adhesive advice
    A message posted at WOODWEB's Adhesives Forum (5/26) -- I expect that you have made a decision already but... My thoughts are either epoxy or PPR You ...

    Re: Who is stupid busy?
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Busy. 12 hours a day plus weekend busy. I tried to drop down to 10 hours and on ...

    Re: DRO operation instructions
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- Good luck with Felder support!!! There's a hobbyist forum called SMC that has a Felder te ...

    Re: Straining gallon plus size
    A message posted at WOODWEB's Finishing Forum (5/26) -- Thank You for the reply Mark, the sieves look like a possible answer in conjunction with a fu ...

    Re: Low profile slotter
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- If all else fail, it sounds like a handsaw laying flat against the 3/4” space ...

    Re: Who is stupid busy?
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Whoa. I'm impressed with typo abilities there.... Wade through the nonsense unt ...

    Re: Who is stupid busy?
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Same story as The Google for us. Make it while we can!! this won't go on foreve ...

    Re: Removable Avery Labels 5366
    A message posted at WOODWEB's CAD Forum (5/26) -- we just squirt a little bit of laquer thinner on the ones that give us a hard time ...

    CabinetVision VS Mozaik
    A message posted at WOODWEB's CAD Forum (5/26) -- My question is this; Is the price of taking your CNC machine to S2M with Cabinet Vision Ultimate wo ...

    Re: Paint for the shop floor
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- rich, yes, that's what I meant, just didn't know how it's called; big round metal plate o ...

    Re: Dehumidifier or AC?
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- Definitely a dehumidifier, like John said, it adds heat, and an AC doesn't have a pur ...

    lease renewal
    A message posted at WOODWEB's Business and Management Forum (5/26) -- I need your input into renewing my lease. My current lease expired 4/30/19. I c ...

    Re: Soliciting CNC Work from Other Shops
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- They set the parameters on their end and when they export the job and email it to me afte ...

    Technical advice for an arc cut of large radius
    A message posted at WOODWEB's Furniture Making Forum (5/26) -- I’m working on a mahogany repro/homage of a Danish modern mirror. See design photo on ...

    Re: mdf interior doors
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- I have done what you are asking about. We just completed an order for 30 preh ...

    Re: painting MDF
    A message posted at WOODWEB's Finishing Forum (5/26) -- One thing I learned. When sealing MDF with any primer make the first coat light barely cloudi ...

    Cabinet vision
    A message posted at WOODWEB's CAD Forum (5/26) -- I'm trying to create angled louvers in cabinet vision as opposed to only horizonal slats that they ...

    Re: Soliciting CNC Work from Other Shops
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- Thanks When you "import" a file do all the parameters come with it or do you ha ...

    Re: Scmi 16n sliding table saw major moving issues
    A message posted at WOODWEB's Solid Wood Machining Forum (5/26) -- Skip cheap straps. You need to use enough rope to keep it from moving. When you ge ...

    Re: Paint for the shop floor
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- If you use latex be aware of all the moisture you are going to bring into the shop. If yo ...

    Re: Flat table nesting routers
    A message posted at WOODWEB's CNC Forum (5/26) -- yes flat table nesting machine the guys from Vancouver quoted me and they're the closest so im thin ...

    Re: Flat table nesting routers
    A message posted at WOODWEB's CNC Forum (5/26) -- Have you considered Biesse? I considered them to have a stronger build and have good service in Can ...

    Re: Scmi 16n sliding table saw major moving issues
    A message posted at WOODWEB's Solid Wood Machining Forum (5/26) -- A few 12" quick clamps? ...

    Re: Flat table nesting routers
    A message posted at WOODWEB's CNC Forum (5/26) -- Where you'd prefer to get it? ...

    Re: Sliding table saw vs CNC
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- I'd agree there's a lot of outdated automated equipment out there, a lot not worth lookin ...

    Sliding table saw vs CNC
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- I'm mostly one (occasionally two) man shop looking to upgrade my cabinet parts cutting ca ...

    Re: Sliding table saw vs CNC
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- If I could only have one saw in the shop, it would be a slider. With that said, I hate sl ...

    Re: Sliding table saw vs CNC
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- Thank you Karl for your detailed response. I'm not totally opposed to used machinery, I t ...

    Re: Financing projects
    A message posted at WOODWEB's Business and Management Forum (5/26) -- We use Synchony bank. We pay 7-8% to offer their 0% programs. We don’t do a lot ...

    Re: Sliding table saw vs CNC
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- from my experience considering the situation you are in at the moment I would strongly su ...

    Re: Commercial bidding
    A message posted at WOODWEB's Business and Management Forum (5/26) -- I misspoke on my previous post I meant to say you would be better off freeing y ...

    Re: festool laminate trimmer
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/26) -- I realize this is probably too late. I have the festool and it’s great f ...

    Re: Tar Paper Over Machinery?
    A message posted at WOODWEB's Furniture Making Forum (5/26) -- Finally found out what this was, so in case anyone else comes across something similar ...

    Re: Fixing SCM Basic 1 edgebander
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- It sounds like the element in the glue pot is burned out but the element in the applicato ...

    Re: Inventor and manufacturing
    A message posted at WOODWEB's CAD Forum (5/26) -- Check out Top Solid wood. It’s a modeling program like inventor but has tools that help a lot in wo ...

    Re: Pods for flat table
    A message posted at WOODWEB's CNC Forum (5/26) -- Here is a pic of one of my pods ...

    Solar kiln - questions regarding first drying run
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- Am going to be starting up a solar kiln for the first time in a week or two, and have ...

    Re: Selling an Architectural Millwork Business
    A message posted at WOODWEB's Business and Management Forum (5/26) -- When selling a business the key factor that determines value is the net taxable ...

    Re: Wood Cad Cam blind dado construction
    A message posted at WOODWEB's CAD Forum (5/26) -- Hi, Since Woodcadcam (imos ag) is designed for more European style cabinet. It is an excellent prod ...

    Re: JOBSITE PROTECTION - WHOS RESPONSIBLE
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/26) -- Whomever paid you is responsible. Who’s responsible for protecting th ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- When I built teak louvered boat doors, we only glued with resorcinol. Left a purple glue, ...

    Re: Selling an Architectural Millwork Business
    A message posted at WOODWEB's Business and Management Forum (5/26) -- PS: one last point. The value of the business will not be based upon the most r ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- Thank you Matthew and Adam for such informative information. I'm impressed with this grou ...

    Re: Music in the Shop
    A message posted at WOODWEB's Business and Management Forum (5/26) -- My policy is that you can listen to music at work as long it is mariachi music. ...

    Re: Finishing time for topocoats
    A message posted at WOODWEB's Finishing Forum (5/26) -- Matt, Why do you do a clear coat? We have always done a primer then 2 tinted topcoats. The pr ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- use TBIII for teak and other oily woods never had a failure with it and fine woodworking ...

    Re: Working with teak
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- How does it work best over epoxies? They either work or don't. ...

    Pay increase evaluations
    A message posted at WOODWEB's Business and Management Forum (5/26) -- About employee management... We are a small firm, very small. I have focused mo ...

    Re: Alphacam VBA
    A message posted at WOODWEB's CNC Forum (5/26) -- Ken, I'm pretty well versed in VBA, but know nothing about AlphaCam. What exactly are you trying to ...

    Re: Performance bond
    A message posted at WOODWEB's Business and Management Forum (5/26) -- It has been many years ago, we bid on a job which required a Performance Bond a ...

    Re: Disposing of chemical waste
    A message posted at WOODWEB's Finishing Forum (5/26) -- We looked into a solvent recycler. They can be had for a few grand so it was a very good opti ...

    Re: Disposing of chemical waste
    A message posted at WOODWEB's Finishing Forum (5/26) -- We are up in Canada but also have this requirement. Its pretty simple. You need to get in tou ...

    Re: water activated dowels
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- We do like Dan. Our cycle times are 2.5 to 3 minutes, plenty long enough in the clamp. By ...

    New jointer or get a spiral for the old one?
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- My jointer is a 20 year old Jet with regular blades. It's a small one, 46 bed I think. I ...

    Re: water activated dowels
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- We put one in, staple in the back and hot melt it as soon as we put it in the clamp. By t ...

    Re: Heat Treated Lumber For Intl. Shipping, Might Need A Kiln?
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- I think the only country in Europe that still accepts fumigation is Turkey. The rest ...

    Re: Performance bond
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Bond cost will be based on dollars bonded and your creditworthiness. Cost is ba ...

    Re: Heat and UF glue times
    A message posted at WOODWEB's Adhesives Forum (5/26) -- I can't give any science on this but we were using UF Glue to bond HPL to plywood using a vac ...

    Re: scaling up production of non-rectangular parts
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- Are you saying you don't have a boring block? They change drill spindles almost instantly ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/26) -- I suppose the Steffs just run a bit warmer. JG tech guy said they make the motors ...

    Re: Lack of workers holds back Utah's economy
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Pat, I am talking the City of San Francisco, not the bay area, it is the city t ...

    Re: Dovetail Machines....
    A message posted at WOODWEB's Solid Wood Machining Forum (5/26) -- Leo, How many boxes has your old Reliant put out? I remember those blue ones from ...

    Re: Disposing of chemical waste
    A message posted at WOODWEB's Finishing Forum (5/26) -- safety kleen had me provide them with the product data sheets of everything i dispose of. The ...

    Looking for this Slide Hardware Setup
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- I have a project that I need to match existing slide hardware. Can anyone tell me who mak ...

    Richlite Countertop
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/26) -- Any of you work with this Richlite Counter yet? As I understand it's ...

    Re: Laminate to Melamine
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- Above all, keep it balanced. I watched a lawsuit where the shop had laminated one side of ...

    Re: DIY 5 foot wide bandsaw mill
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- here is his playlist from start to finish on how he build his sawmill..this should ma ...

    Re: Busellato Jet Concept M Pneumatic Cylinder
    A message posted at WOODWEB's CNC Forum (5/26) -- its a double acting sensor ready tie rod cylinder Mcmaster carr have lots and specs are there to ma ...

    Re: Busellato Jet Concept M Pneumatic Cylinder
    A message posted at WOODWEB's CNC Forum (5/26) -- Airline Hydraulics Corporation 376 Dry Bridge Road, Bldg. B-1 | North Kingstown, RI | (401) 583-019 ...

    Re: Dovetail Machines....
    A message posted at WOODWEB's Solid Wood Machining Forum (5/26) -- Probably thousands. Still going strong. The router bits are the weak point in that ...

    Re: Brand new Steff feeder getting hot
    A message posted at WOODWEB's Solid Wood Machining Forum (5/26) -- For sure. Cut quality, tool and blade life are a major Improvement too. ...

    Re: Disposing of chemical waste
    A message posted at WOODWEB's Finishing Forum (5/26) -- Solvent recycling unit? ...

    Re: why is my butternut sapwood really hard & dark
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- I guess the joke is on you since you spoke it. Yes butternut is a form of walnut...so ...

    Re: edge of high gloss slab doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- Down here in AU the wet look is actually quite common. The difference between a typical k ...

    Re: Cnc Advices
    A message posted at WOODWEB's CNC Forum (5/26) -- If you want to do more than drilling horizontally, you will need a C axis to get a single output ag ...

    Re: why is my butternut sapwood really hard & dark
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- Firewood????? LOL!!! People pay premium for spalting like that!!! Butternut I'm not s ...

    Re: Cabnetware Replacement
    A message posted at WOODWEB's CAD Forum (5/26) -- We've used Cabnetware & Microvellum but found Topsolid to be our software of choice. I wanted s ...

    Re: Cnc Advices
    A message posted at WOODWEB's CNC Forum (5/26) -- thank you for your responses Alex and Mike i found couple of cnc that are are found locally in my c ...

    Re: Cabnetware Replacement
    A message posted at WOODWEB's CAD Forum (5/26) -- This is a cut and dry sort of thing. Bigger commercial shops go with Microvellum Residential go wit ...

    Re: No more service for omnitech
    A message posted at WOODWEB's CNC Forum (5/26) -- Ok, I am at the same boat, I got a 2005 which needed some services, same thing the person at Giben ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/26) -- regardless if you stain first or not, first seal the surface with dewaxed shellac washcoat. T ...

    Omnitech Pal
    A message posted at WOODWEB's CNC Forum (5/26) -- Hi, As everyone know now there is no reliable service for the Omnitech, we are experience a problem ...

    Re: Sealcoat grain filler
    A message posted at WOODWEB's Finishing Forum (5/26) -- Stain, let dry, hose on a high build lacquer sealer(two coats) back sand without sanding thro ...

    No more service for omnitech
    A message posted at WOODWEB's CNC Forum (5/26) -- I own an 2011 Omnitech Sellex Pal and just found out today that they are no longer servicing them. ...

    Re: why is my butternut sapwood really hard & dark
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- Hold on, are you joking? Can't tell from the way you type. But you are asking if you ...

    Zargen drawers
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- I just purchased a Grass Ecopress and Ram and wondering if anyone knows of any instructio ...

    Glue on Top Edge
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- I'm getting extra glue on the trailing edge, top side of plywood using a 1417 Sprint. Any ...

    Re: Veneering over solid surface
    A message posted at WOODWEB's Adhesives Forum (5/26) -- Better look at coefficient of expansion on the solid surface/ Might just move too much and sp ...

    why is my butternut sapwood really hard & dark
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- This limb I have cut into out of a walnut tree in my yard ,I assume is butternut, I c ...

    Re: Short needle pine for pier
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- It has been a while since I've had any custom treated, but it was very reasonable. Th ...

    Re: Omnitech Pal
    A message posted at WOODWEB's CNC Forum (5/26) -- Sounds like bearings. A common easy to deal with problem. Look at the parts manual or the bearings ...

    Re: Solid wood bits
    A message posted at WOODWEB's CNC Forum (5/26) -- We have had the most success with a 3 flute slow helix 3/4 or 1/2" Dia bit. The slow spiral do ...

    Re: edge of high gloss slab doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- I always ease edges with a 1/16 or 2mm roundover bit. I have dedicated trim routers for t ...

    Re: Installing loose back splashes
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/26) -- Smart clips are best that we have tried. Keeps the back splash fasten ...

    Re: Post Production Output
    A message posted at WOODWEB's CNC Forum (5/26) -- For what? Cabinet design? Nesting? CAM? Looks like KCD CNC Commander will export G-code easily. Can ...

    Re: Installing loose back splashes
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/26) -- I've been using smartclips for over 20 years. http://thesmartclip.com ...

    Re: why is my butternut sapwood really hard & dark
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- That is some very attractive firewood you have there. ...

    Re: why is my butternut sapwood really hard & dark
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- Error....I meant it's also called white walnut. ...

    Re: Wood Shower
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/26) -- Perfect project for faux wood grain solid surface ...

    Re: Post Production Output
    A message posted at WOODWEB's CNC Forum (5/26) -- What program do you use? ...

    Rules of Thumb for Max Exterior Door Veneer Thickness?
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- I am working on the design for a rather unique and difficult entry door and w ...

    Improving Information Flow
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Hello, I have been asked to help a friend put some systems in place to organize ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Our business may operate a bit different than many on here. It seems that most ...

    Re: nested base vs beam saw
    A message posted at WOODWEB's CNC Forum (5/26) -- I swear I was looking to see if my name was at the bottom as the author of this dissertation. I mak ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Mel, The philosophy, principles, practices and methods of Lean are certainly us ...

    Re: Interesting article about disruptive economies
    A message posted at WOODWEB's Business and Management Forum (5/26) -- "This worked for a very long time. No matter how you put those key words t ...

    Does optimization=boring shop job?
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Before thinking of stepping things up a notch, I went in person to deliver a wh ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/26) -- "(2) resources which may be multi-functional machines and multi-skilled wo ...

    Re: nested base vs beam saw
    A message posted at WOODWEB's CNC Forum (5/26) -- I ran the #'s for the space currently used by the ptp & saw VS a new self load router. 784' sav ...

    Re: how much spring in a spring joint
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- 1/16" over 10' isn't going to harm anything. The wider the board the lon ...

    Re: paperwork
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Yes, we do use a Traveler (aka "Work Order"). It has what we have det ...

    Re: paperwork
    A message posted at WOODWEB's Business and Management Forum (5/26) -- "Standardized processes" Ayuh. We don't even print the routings (i.e. ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Mel, Only seven or eight wood working shops bought our scheduling software. A l ...

    Re: The T and M curse.
    A message posted at WOODWEB's Business and Management Forum (5/26) -- I said "it would appear that you always give yourself a bigger cushion tha ...

    how much spring in a spring joint
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- understanding that spring joints can be a good thing (especially, when we sim ...

    Re: nested base vs beam saw
    A message posted at WOODWEB's CNC Forum (5/26) -- Thanks Chad. the biggest hurdle I have had with going to cnc,first ptp then nested base, is to stop ...

    Shopping for a new Laser Level
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/26) -- We're in the market for a new laser level, we've been using a $200.00 ...

    Re: CD bansawmill and Stanner
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- What species? What green size and what final size? Kiln dried, air dried or green? Sa ...

    Re: Plank door construction
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- David addressed my concern. If all glued up tight, you no longer have a bunch ...

    Re: paperwork
    A message posted at WOODWEB's Business and Management Forum (5/26) -- A traveler is helpful. Similar to an order at a restaurant. It goes from the wa ...

    Re: paperwork
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Only produce the "paperwork" that is required. What information is ne ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/26) -- Mike, its dave who commented on the missing seal. Ya you have to buy a set of 10 seals. every ...

    Re: Paint grade doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- Not saying my way is right and yours is wrong but I don't understand a couple of things.. ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/26) -- I just saw in the pic you have an 09-094 tip which will give you about 8" wide at 10&quo ...

    Re: nested base vs beam saw
    A message posted at WOODWEB's CNC Forum (5/26) -- Larry the labor savings can be more a little. I would bet its greater than your space and materials ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/26) -- you need a 150 040 329 pack of seals without those you cannot redirect the atomizing air to t ...

    Re: Felder Format CNC
    A message posted at WOODWEB's CNC Forum (5/26) -- My experience is like your's in trying to get pods. Takes way too long to get parts. Their tools ar ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/26) -- My exposure to such software was for a very large manufacturer--and it was the ...

    Re: Measuring a shops capacity for growth
    A message posted at WOODWEB's Business and Management Forum (5/26) -- "Toyota does not have a need to develop right methods for resolving some m ...

    Re: Choosing water stones
    A message posted at WOODWEB's Furniture Making Forum (5/26) -- I'm not a fan of the 8000 stone. I can get a good working chisel with 800, 1200, and 3 ...

    Kremlin vs CAT
    A message posted at WOODWEB's Finishing Forum (5/26) -- A thread below this one talks about a Kremlin spray gun and how expensive simple parts are fo ...

    Re: Choosing water stones
    A message posted at WOODWEB's Furniture Making Forum (5/26) -- Thanks guys. I just bought Sharon professional series stones. 1000 grit and 8000 grit. ...

    Re: 2 sided mirror
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- We buy two 1/8 mirrors and glue them together back to back with mirror mastic this is an ...

    Re: Paint grade doors
    A message posted at WOODWEB's Cabinetmaking Forum (5/26) -- Just to clarify, we do make flat panel doors the cnc. The cutter that hogs out the panel ...

    Re: The T and M curse.
    A message posted at WOODWEB's Business and Management Forum (5/26) -- But isn't that why we make more bidding jobs? I usually add 15 to 20% from what ...

    Re: Choosing water stones
    A message posted at WOODWEB's Furniture Making Forum (5/26) -- Thanks Rich C. I just want to make sure I can get my tools as sharp as possible. I don ...

    Re: rustic white oak dining table
    A message posted at WOODWEB's Furniture Making Forum (5/26) -- You know the old adage about applying oil finishes; once a day for a week, once a week ...

    Re: Wide belt contact drum recover
    A message posted at WOODWEB's Solid Wood Machining Forum (5/26) -- Make sure who ever does it can spin balance it for you. On combi head machines 75 ...

    1994 Author 502 software upgrade?
    A message posted at WOODWEB's CNC Forum (5/26) -- Can this machine be upgraded to a modern operating software? It is a Tria 6000 I think. would like ...

    Re: paperwork
    A message posted at WOODWEB's Business and Management Forum (5/26) -- I found them useful in assuring that certain functions were performed i.e. qual ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/26) -- Lol. Thx Herb! What a joke! I bought them this morning. I bought the EOS 15-1 from my Sherwin ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/26) -- Like 20-25.00 before shipping cheaper. Through that place in PA, it's a flat rate of 10.00, u ...

    S2M Center within Alphacam
    A message posted at WOODWEB's CAD Forum (5/26) -- I am trying to import S2M tool setting to alphacam . Is anybody have clue how i can import all sett ...

    Re: Kremlin excite
    A message posted at WOODWEB's Finishing Forum (5/26) -- suprising, how much of a difference in price? figured sw would be the same price as everyone ...

    Re: Choosing water stones
    A message posted at WOODWEB's Furniture Making Forum (5/26) -- I would say the Shapton stones are the the best thing going tight now. ...

    PDF to DWG Conversion
    A message posted at WOODWEB's CAD Forum (5/26) -- Any decent software out there that really does this well? Cost is not an issue. Cheers. ...

    Re: PDF to DWG Conversion
    A message posted at WOODWEB's CAD Forum (5/26) -- As long as the pdf has vector information, both Corel and Illustrator will do it. ...

    Safe Rooms
    A message posted at WOODWEB's Business and Management Forum (5/26) -- Is there an uptick in demand for this item? ...

    Re: Felder Pods
    A message posted at WOODWEB's CNC Forum (5/26) -- I take it the two companies listed couldn't help you. ...

    Re: PDF to DWG Conversion
    A message posted at WOODWEB's CAD Forum (5/26) -- We are using print2cad ...

    Re: Preventing warp in pedestal table tops
    A message posted at WOODWEB's Furniture Making Forum (5/26) -- David has "hit the nail on the head." One additional step is to coat all six ...

    Re: Wood Countertop
    A message posted at WOODWEB's Furniture Making Forum (5/26) -- Two thoughts for the future... First, moisture change in the top is what will cause di ...

    Re: Stair Treads Cupping
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/26) -- I strongly urge you to open the plywood bottom and look for any signs ...

    Re: Epoxy barrier coat on exterior doors
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- Regarding epoxy, there are different types. The standard epoxy is quickly det ...

    Re: Thinning Titebond II for slower set
    A message posted at WOODWEB's Furniture Making Forum (5/26) -- Are you seriously concerned about spending an extra $5 or so per gallon for slower set ...

    Re: Exterior screen doors
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- The point about the sapwood on white oak is well taken. It's funny, but in (r ...

    Re: Crown on ceiling and cabinets
    A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/26) -- Hmmm... room trim is done by the trim carpenter, and painted like the ...

    Re: Thinning Titebond II for slower set
    A message posted at WOODWEB's Furniture Making Forum (5/26) -- Consider wetting the wood surfaces that will be glued with a damp (not soaking wet) ra ...

    Re: Epoxy barrier coat on exterior doors
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- Pigmented epoxy paints are great and virtually indestructible, especially ove ...

    Re: Exterior screen doors
    A message posted at WOODWEB's Architectural Woodworking Forum (5/26) -- I too like sapele for this job. Regarding white oak, use only heartwood. The ...

    anckor seal 2
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- is one coat enough im sealing 2" and thicker slabs and 1" cedar and walnut ...

    My DIY power feed is working now
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- I made a video that explains how I built it and shows how it works. ...

    Re: anchor seal 2
    A message posted at WOODWEB's Sawing and Drying Forum (5/26) -- One thick coat or two thin coats...do not brush out like you are painting a wall. ...

    Re: is it worth it to upgrade powermatic e16
    A message posted at WOODWEB's Cabinetmaking Forum (4/26/23) -- If you have a Powermatic e16 in nice condition I'd spend the money on a Byrd head for ...

    Question about Salice thick door hinge
    A message posted at WOODWEB's Cabinetmaking Forum (4/26/23) -- Making doors 1-1/8” thick, 16”Wx 88” tall. Would like soft close. I’m not sure if the ...

    Re: Help design a simple CNC router table
    A message posted at WOODWEB's CNC Forum (4/26/23) -- So you intend to build your own CNC? Simple or complex, you need all the same components, a cont ...

    Re: Large custom knife for 5"Tx3"D arched heavy crown moulding? Laguna SSII
    A message posted at WOODWEB's CNC Forum (4/26/23) -- I would do as BH suggested. Bricklayed and in three separate moulding knives. Top portion with t ...

    Re: Large custom knife for 5"Tx3"D arched heavy crown moulding? Laguna SSII
    A message posted at WOODWEB's CNC Forum (4/26/23) -- Back to the original poster. I am still not sure what the heck he is looking for. Can you post t ...

    Mlc polarion for paddles
    A message posted at WOODWEB's Finishing Forum (4/26/23) -- Does any one think that polarion would be an appropriate 2 component finish for canoe padd ...

    Re: Help design a simple CNC router table
    A message posted at WOODWEB's CNC Forum (4/26/23) -- Yeah no way I'd build it, and I'm very open to getting something used. Where could I look for us ...

    Re: Cabinet drilling questions
    A message posted at WOODWEB's CAD Forum (4/26/23) -- I agree with @Michael on this one and say going with a CNC router is your best bet! ...

    Re: Safety Speed widebelt
    A message posted at WOODWEB's WOODnetWORK Forum (4/26/22) -- Doug, I've been running one for several years now, and regularly field calls from other ...

    Re: CV not curing properly over bleached Oak.
    A message posted at WOODWEB's Finishing Forum (4/26/22) -- Matthew, I am assuming you used lye flake, saturating until flake would no loner dissolve ...

    Re: Quick turn around adhesive
    A message posted at WOODWEB's Adhesives Forum (4/26/22) -- I was using an urethane glue that came in a calking tube. Misted water on the parts, appli ...

    Re: Saltwater aquarium hoods and bases
    A message posted at WOODWEB's Finishing Forum (4/26/22) -- Id think one heavy wet coat of finish on the interior (leave it rough sanded so it still h ...

    Re: Saltwater aquarium hoods and bases
    A message posted at WOODWEB's Finishing Forum (4/26/22) -- Could you bond something simple like FRP or equivalent (inexpensive) to the interior of th ...

    Re: Saltwater aquarium hoods and bases
    A message posted at WOODWEB's Finishing Forum (4/26/22) -- Mark B That is a good idea I had not considered. It caused me to think about "maybe&q ...

    Re: red gum
    A message posted at WOODWEB's Architectural Woodworking Forum (4/26/22) -- How many board feet are you looking for? No local sawmill options? What wh ...

    Painting Natural Birch
    A message posted at WOODWEB's Finishing Forum (4/26/22) -- Hello, We typically use PG Beech for our painted solid wood parts. Does anyone have any ne ...

    Re: Looking for small kiln controller
    A message posted at WOODWEB's Sawing and Drying Forum (4/26/22) -- George could you send some pictures of your system? I am in the process of buildin ...

    Re: CV not curing properly over bleached Oak.
    A message posted at WOODWEB's Finishing Forum (4/26/22) -- You didn't do anything to neutralize the lye? No water or white vinegar wash? ...

    Re: Painting Natural Birch
    A message posted at WOODWEB's Finishing Forum (4/26/22) -- You'll need a good primer to cover the dark heartwood next to cream colored sapwood. ...

    Re: Optimizing your materials
    A message posted at WOODWEB's Finishing Forum (4/26/22) -- Maybe turn the tube upside down like Leo said and stick a funnel in it . ...

    Re: How is hand scraped flooring made commercially?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/26/22) -- Google is a wonderful thing! ...

    Re: Painting Natural Birch
    A message posted at WOODWEB's Finishing Forum (4/26/22) -- Kinda grainy. Why not Maple? ...

    Double surfacer issues
    A message posted at WOODWEB's Solid Wood Machining Forum (4/26) -- To those of you that are running double surfacers with the spring loaded carpet fi ...

    Re: Q CAD
    A message posted at WOODWEB's CAD Forum (4/26) -- I have it on my pc, I have used it to take sink cutout files and drop them into countertop dxfs for ...

    Re: Making it super easy to load panels on CNC for cheap
    A message posted at WOODWEB's CNC Forum (4/26) -- Thanks Derrek ...

    Re: Spraying latex with CAT pump
    A message posted at WOODWEB's Finishing Forum (4/26) -- I wasnt really referring to a solvent pigment match. If he is running any name brand paint yo ...

    Small shop relief
    A message posted at WOODWEB's Business and Management Forum (4/26) -- I am a small two person shop. I have very low overhead($1200-1500 a month, not ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/26) -- Julio, I have heard the argument that 90% of the people on ventilators die and ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/26) -- I wonder sometimes how they calculate the stats. Deaths per 100,000? Or deaths ...

    estimate
    A message posted at WOODWEB's Finishing Forum (4/26) -- I am new in this wood furniture finishing/refinishing business. I got following jobs . a. 35' ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/26) -- When I had the Hong Kong flu, and almost died, the US population was a little m ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/26) -- "When put on a ventilator 10% of the people that are going to die end up l ...

    Re: Spraying latex with CAT pump
    A message posted at WOODWEB's Finishing Forum (4/26) -- Not to mention a product like KemAqua (or any other pigmented water you have access to) will ...

    Re: Help with water base finishes
    A message posted at WOODWEB's Finishing Forum (4/26) -- I used to use aqua prime but it clogged up tips and everything else and was a bear to cleanup ...

    Re: estimate
    A message posted at WOODWEB's Finishing Forum (4/26) -- How did you get the jobs without knowing what to charge? No one can tell you what to charge; ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/26) -- To the very people that already have 90% of everything. You certainly don't bel ...

    Re: waterfall edge clamp
    A message posted at WOODWEB's Furniture Making Forum (4/26) -- You might have better luck with a paper joint on a 45 degree caul. Paper joints hold p ...

    Re: Small shop relief
    A message posted at WOODWEB's Business and Management Forum (4/26) -- Did you apply for the EIDL with the SBA ? What about your local or state level ...

    Re: Adjusting wide belt sander bed
    A message posted at WOODWEB's Solid Wood Machining Forum (4/26) -- Keith that is exactly what it was. I added a .25mm shim under the block and she is ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/26) -- Julio, Fair enough, where do you see the money going? ...

    Re: Coronavirus first hand
    A message posted at WOODWEB's Business and Management Forum (4/26) -- When NOTHING adds up FOLLOW the money. ...

    Re: What is throat seal oil?
    A message posted at WOODWEB's Finishing Forum (4/26) -- Leo rebuild that thing, I was just the same, waited till the thing finally "puked" ...

    Re: What is throat seal oil?
    A message posted at WOODWEB's Finishing Forum (4/26) -- I just reloaded my bottle for the third time. It's an 8 oz bottle. I use my Kremlin out in th ...

    Re: Need Help With T&G Pattern Gate
    A message posted at WOODWEB's Architectural Woodworking Forum (4/26) -- i appreciate the input and will pursue the approach you suggest. I do have 2 ...

    Re: Humidor cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- I do have a full base cabinet under the humidor cabinet that I could house the humidifier ...

    Re: Humidor cabinet
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- The humidifier will have to be very large. Likely very expensive. Your best bet it to bui ...

    Re: What is throat seal oil?
    A message posted at WOODWEB's Finishing Forum (4/26) -- I'm with tom, unless you're rebuilding your pumps multiple times a year and starting with fre ...

    Re: What is throat seal oil?
    A message posted at WOODWEB's Finishing Forum (4/26) -- Pump works good. Motor works good too. I can have it cycle thinner with zero pressure on the ...

    Re: What is throat seal oil?
    A message posted at WOODWEB's Finishing Forum (4/26) -- How much of that oil do you guys go though ?I've had my Kremlin 9 years and I'm still working ...

    Re: Inventor and manufacturing
    A message posted at WOODWEB's CNC Forum (4/26) -- The old saw of software is measured in man years of development. Caveat Emptor ...

    Re: Edgebander buffing wheels
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- RicoCNC supplies a range of edge banding machinery parts ...

    Re: drying bamboo
    A message posted at WOODWEB's Sawing and Drying Forum (4/26) -- Thanks. Did anyone ever find out what the exact species was? ...

    Re: Biesse vacuum pod repair
    A message posted at WOODWEB's CNC Forum (4/26) -- RicoCNC supply a range of Biesse vacuum suction pods ...

    Re: drying bamboo
    A message posted at WOODWEB's Sawing and Drying Forum (4/26) -- Vivax ...

    problem with Fadal spindle error code
    A message posted at WOODWEB's CNC Forum (4/26) -- So i've got everything on my machine repaired or rebuilt, ready to put it in service and i get a ne ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- The whole idea of pocket screws is to no other fasteners on the frames. Screw them togeth ...

    Re: Rough Sawn
    A message posted at WOODWEB's Sawing and Drying Forum (4/26) -- I'm not sure your wanting to make your saw cut rougher than it cuts now, or just roug ...

    Re: Kremlin tip selection for waterborne Chemcraft?
    A message posted at WOODWEB's Finishing Forum (4/26) -- I agree that the thought is it will not work. But it is the right method for ICA products. I ...

    Re: edgebanding trimmer recommendations
    A message posted at WOODWEB's Laminating and Solid Surfacing Forum (4/26) -- A palm sander held at an approximately 30 degree angle pressing against ...

    Re: Rough Sawn
    A message posted at WOODWEB's Sawing and Drying Forum (4/26) -- I had a customer complain that my wood was too smooth-- he wanted a non-skid floor fo ...

    Re: problem with Fadal spindle error code
    A message posted at WOODWEB's CNC Forum (4/26) -- I know nothing about the machine specific G-code but suggest trying S500 on a line by itself and if ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- Drive four very small brads partially into the face frame. Trim the brads so that only ab ...

    Re: Am I being paranoid? Tree felling and possible lengthwise splitting
    A message posted at WOODWEB's Sawing and Drying Forum (4/26) -- For 2x lumber, dry before edging. This will allow some warp and yet you can get strai ...

    Re: Am I being paranoid? Tree felling and possible lengthwise splitting
    A message posted at WOODWEB's Sawing and Drying Forum (4/26) -- When I run into end splits (seems to happen a lot with walnut), I cut parallel to the ...

    Re: Refinishing End Table
    A message posted at WOODWEB's Finishing Forum (4/26) -- Looks like the poly is lifting from the open grain where the sandpaper didn't reach. Without ...

    Re: Easily removable label for melamine/formica?
    A message posted at WOODWEB's Adhesives Forum (4/26) -- The adhesive used for all of those tapes are heat activated. Use a hair dryer (not a heat gun ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- We also prefer the straightness of the Castle because if you overtighten the Kreg screw i ...

    Re: High Heat
    A message posted at WOODWEB's Adhesives Forum (4/26) -- There are lots of choices: https://www.google.com/search?q heat+resistant+adhesive&oq hea ...

    Re: grease
    A message posted at WOODWEB's CNC Forum (4/26) -- Careful about mixing grease. I did that once with an SCM machine and I ended up with waxy plugs in ...

    Re: Am I being paranoid? Tree felling and possible lengthwise splitting
    A message posted at WOODWEB's Sawing and Drying Forum (4/26) -- good idea on drying before edging. Thanks for reply's. Gene can you direct me to a di ...

    Re: Am I being paranoid? Tree felling and possible lengthwise splitting
    A message posted at WOODWEB's Sawing and Drying Forum (4/26) -- Live sawing is when you start sawing a log and saw about halfway through, then rotate ...

    Re: Refinishing End Table
    A message posted at WOODWEB's Finishing Forum (4/26) -- What stain and what poly did you use? Looks like the stain wasnt dry all the way in the grain ...

    Re: Refinishing End Table
    A message posted at WOODWEB's Finishing Forum (4/26) -- Took down to the wood means I used sand paper only, using 80 grit to start with and worked up ...

    Re: PUR edge banding adhesives
    A message posted at WOODWEB's Adhesives Forum (4/26) -- I have a Pur hot glue gun which I never use anymore. It leaves a black line at the joint. I h ...

    Re: Onsrud Routers
    A message posted at WOODWEB's CNC Forum (4/26) -- Onsrud uses Osai controls. I know that Osai does have a conversational feature. I've seen it used o ...

    Re: Refinishing End Table
    A message posted at WOODWEB's Finishing Forum (4/26) -- Come on rich c....with your 7 years of High Skool, even you should be able to figure that out ...

    Re: RoughSawn
    A message posted at WOODWEB's Solid Wood Machining Forum (4/26) -- Drag planks backward diagonally across a coarse bandsaw blade. Works like a charm. ...

    Re: Refinishing End Table
    A message posted at WOODWEB's Finishing Forum (4/26) -- He does show a gas can in the photo, maybe it was soaked and set on fire! ...

    Re: Kremlin tip selection for waterborne Chemcraft?
    A message posted at WOODWEB's Finishing Forum (4/26) -- What ICA products are you spraying? ...

    Re: Kreg Screws and Glueing Joints
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- Ya.... no. ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/26) -- cabmaker, In a round about way I will answer your question. You live in what wa ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/26) -- FamilyMan, I will give you this much. Trump is an absolute mirror of his consti ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/26) -- I'll agree with both Tim and Pat. Generally, tariffs are stupid and benefit onl ...

    Re: Spray booth calculations
    A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (4/26) -- Venturi, Two good sources with technical support for spray booth ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/26) -- cabmaker, A few things: 1) responses like that will guarantuee another four yea ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/26) -- FamilyMan, So I gather you & the missus are going to be sponsoring a bake s ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/26) -- Great work David. I always appreciate the old school new school argument. The ...

    Raimen saw programming?
    A message posted at WOODWEB's Solid Wood Machining Forum (4/26) -- Hello all! I'm wondering if anyone can tell me if there is any way to create a sep ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/26) -- I wouldn't look at this as David is an old world craftsman and some guy using ...

    applying veneer to safe room door
    A message posted at WOODWEB's Veneer Forum (4/26) -- I am a cabinet and trim man. I have a job going that they told me after I had started that they ...

    Re: Cutting straight and close
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- The sheets of veneer are placed between two sheets of 1/4" MDF that are at least as ...

    20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/26) -- Could one of the economists on this forum please explain what the administratio ...

    Vintage Komo VR510 CNC
    A message posted at WOODWEB's CNC Forum (4/26) -- Hello, I purchased a used Komo VR510 2 years ago. The computer hard drive crashed right after I got ...

    Re: Two part epoxy on 5 piece shaker poplar and mdf door?
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- Thanks for all the info! After a lot of research, i am just going to shoot without any ca ...

    Re: applying veneer to safe room door
    A message posted at WOODWEB's Veneer Forum (4/26) -- I would try a Phenolic backed veneer. If you are not familiar with this, it is a laminate sheet ...

    Rub Through
    A message posted at WOODWEB's Finishing Forum (4/26) -- Hi I need some help from some experienced finishers. I have a small dilema. We painted a refr ...

    Re: Cutting straight and close
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- I have done the sandwich thing between sheets of boards, but it seems like unless you hav ...

    Re: Compound Curve Crown Molding
    A message posted at WOODWEB's Architectural Woodworking Forum (4/26) -- David, thanks for the post. Very interesting, and well illustrates the direct ...

    Steps for Milk paint then Glaze then poly
    A message posted at WOODWEB's Finishing Forum (4/26) -- I am doing a test cabinet before I start a project. I am doing GF antique white milk paint wi ...

    Re: cutting corrugated aluminum
    A message posted at WOODWEB's CNC Forum (4/26) -- How thick is the material and what type of equipment do you have to cut it? I have cut aluminum wit ...

    Re: HSD replacement shafts
    A message posted at WOODWEB's CNC Forum (4/26) -- Thanks guys, I reached out to a local woodworking shop that has had cnc's for years and they were h ...

    Re: Toe skins finish at 3" from door or 3" case?
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- I use to do mine at 4" tall but because of the toe kick heaters that usually get inc ...

    Re: Rub Through
    A message posted at WOODWEB's Finishing Forum (4/26) -- you will have to clean off that white in the areas you want to show through, there is no way ...

    Pole Barn vs. Steel Building for Woodshop
    A message posted at WOODWEB's WOODnetWORK Forum (4/26) -- I'm planning ahead to my next phase of business growth. I have 3 acres of land that my hous ...

    Re: HSD replacement shafts
    A message posted at WOODWEB's CNC Forum (4/26) -- Give Ryan a call at All About Spindles, he has a extensive amount of experience on both the repair ...

    HVLP canisters
    A message posted at WOODWEB's Finishing Forum (4/26) -- Many years ago I bought some polypropylene canisters to use with my astro spray gun. Raybern ...

    Re: Enlarging hole for bigger led spot
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- If its only a few LEDS we have used a Dremel with a circular sanding head and sand to the ...

    cutting corrugated aluminum
    A message posted at WOODWEB's CNC Forum (4/26) -- A customer wants me to cut a piece of aluminum with corrugated plastic in between the two sides of ...

    Re: best way to move powermat 700 into place from the crate
    A message posted at WOODWEB's Solid Wood Machining Forum (4/26) -- We ended up cabling overhead to the forks on our large toyota lift and hoisting it ...

    Re: Toe skins finish at 3" from door or 3" case?
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- we cut ours 4 1/4" tall x 2 1/2" deep and apply a 1/4" skin in front of th ...

    Re: Acrylic enamel or tinted CV
    A message posted at WOODWEB's Finishing Forum (4/26) -- Your using a cv on exterior? Let me save you some heart ache and repeat customer business... ...

    Re: Toe skins finish at 3" from door or 3" case?
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- We do the same thing. 4 inches high. 3 inches from door to finished toe kick. Not sure if ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/26) -- Obviously American loggers may benefit by an increase in business. In aggregate ...

    Re: Enlarging hole for bigger led spot
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- We've done the hole in a plywood thing before. Find a way to wedge in or clamp. I also th ...

    Toe skins finish at 3" from door or 3" case?
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- Looking for an industry standard. We have always done 4" tall and 3" back from ...

    Re: applying veneer to safe room door
    A message posted at WOODWEB's Veneer Forum (4/26) -- If they want it to look like wood, use wood. Real wood. There is no reason to not use real wood ...

    Re: Cutting straight and close
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- "Veneer sandwiched between 1/4" MDF and walked through a tablesaw works well.&q ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/26) -- If he can't get Mexico to pay for a Wall on the Southern border, then maybe he ...

    Re: Enlarging hole for bigger led spot
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- Once "Jig" is in place start cut slowly and increase with depth. I am sure You ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/26) -- Apparently this happens every 10 years or so as a part of NAFTA. You guys add a ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/26) -- Rich, Politics drives business and business drives politics. You can't have one ...

    Re: Rub Through
    A message posted at WOODWEB's Finishing Forum (4/26) -- How hard is it to make a new paint grade refrigerator panel? Stop throwing labor hours at tha ...

    Re: 20% tariff on Canadian Lumber
    A message posted at WOODWEB's Business and Management Forum (4/26) -- Christ, it's getting to the point I can just ignore any new posts about busines ...

    Re: best way to move powermat 700 into place from the crate
    A message posted at WOODWEB's Solid Wood Machining Forum (4/26) -- Two overhead boom trucks and an I beam. ...

    Re: Acrylic enamel or tinted CV
    A message posted at WOODWEB's Finishing Forum (4/26) -- Hopefully you're putting the CV on the interior of the windows. ...

    Re: Enlarging hole for bigger led spot
    A message posted at WOODWEB's Cabinetmaking Forum (4/26) -- Use hot melt glue gun for the disk. Drill away. ...

    Re: Acrylic enamel or tinted CV
    A message posted at WOODWEB's Finishing Forum (4/26) -- Yes its all on the interior. Finish work. ...

    Re: applying veneer to safe room door
    A message posted at WOODWEB's Veneer Forum (4/26) -- Did you use water based contact cement? ...

    Re: Vintage Komo VR510 CNC
    A message posted at WOODWEB's CNC Forum (4/26) -- Try cnczone Lots of Fanuc experts there. ...

      ---   Return to Top   ---   View More Results