Search Results from WOODWEB's Site Search Engine

Product Directory Search Results: There were no Product Results for this search term

Machinery Exchange Search Results: There were no Machinery Exchange Results for this search term

Job Opportunities and Services Exchange Search Results: There were no Job Opportunities and Services Exchange Results for this search term

Lumber Exchange Search Results: There were no Lumber Exchange Results for this search term

Classified Ads Exchange Search Results: There were no Classified Ads Exchange Results for this search term

Project Gallery Search Results: There were no Project Gallery Results for this search term

Shop Gallery Search Results: There were no Shop Gallery Results for this search term

Shop Built Equipment Gallery Search Results: There were no Shop Built Equipment Gallery Results for this search term

Sawmill Gallery Search Results: There were no Sawmill Gallery Results for this search term

Sawing and Drying Directory Search Results: There were no Sawing and Drying Directory Results for this search term

Industry News Search Results: 21

Auctions, Sales, and Special offers: There were no Auctions, Sales, and Special offers Results for this search term

Events Calendar Search Results: There were no Events Calendar Results for this search term

Your search for woodweb found 56563 documents (of 57000 searched).
18028-19027 of the 56563 results are displayed below.

Product Directory Results:

There were no Product Results for this search term

--- Return to Top --- View More Results

Knowledge Base Results:

Lumber Grading, Quality, and Small Mills

Here's an extended discussion of the public policy issues involved in lumber grading, and construction using un-graded lumber, as seen from the point of view of the small sawmill operator. May 18, 2010

Darkening a Danish Oil Finish on Walnut

Thoughts on tweaking the color of Walnut after it has already been coated with an oil-based home brew.September 18, 2014

Two-Flute Versus Four-Flute Bits

Are two flutes or four flutes better in a dowel-boring bit? September 25, 2014

Holly and Teak for Boat Decking

This thread answers the question of why Holly and Teak are paired in boat decking (below decks only), and continues with a folkloric and historic discussion of Teak for boatbuilding — including on nuclear submarines.October 19, 2013

Methods and Materials for an Outdoor Curved Stair

A woodworker gets advice about replacing a beautiful and well-made outdoor curved stair. April 22, 2014

Sharing Photos of Completed Work

Should a contractor share professional photography he has paid to have done with the owner of the project being photograped? And on what terms? The issues can be complicated. September 3, 2014

Bandmill Blades for Metal-Infested Wood

Advice on where to find and buy blades for a bandsaw mill that can survive an encounter with nails, wire, et cetera in the log. December 31, 2013

Edge Sanding Curved Parts

Craftsmen discuss off-the-shelf and shop-invented solutions for smoothly sanding unique curved wood items. May 16, 2014

Managing Maple Trees in a Mixed Woods

There's good advice here on managing a mixed hardwood stand for long-term value and forest health. June 14, 2014

Finding Spindles for an Old Shaper

This thread about locating parts for an old Whitney shaper has some interesting info on the way the old iron was built. June 30, 2014

Modifications and Tricks with Small Bandsaw Mills

You can do a lot with a small portable bandmill, if you apply some creative jury-rigging. Check out this extensive set of photos. July 18, 2008

Filtering Shop Air

Dust collection for your machinery isn't a complete solution. There are reasons to have air filtering for fine dust in the shop air, as well.June 15, 2014

Advice to a Beginner on Finishing Maple

The best course may be to hire a pro who has the right equipment and experience. But failing that, here are some ideas about finishing Maple with wipe-on products. March 13, 2014

Creating a Thin Striated Glaze

Finishers discuss improvised tools and hand techniques for obtaining a pattern of thin lines ("striations") on a finished surface. January 24, 2014

Should I Use a Tinted Undercoat?

A finisher who's having trouble hiding color variations in a Poplar project gets suggestions for tinting the undercoat. August 12, 2014

Yellowing Paint on New Poplar Doors

This long discussion deals partly with the performance of paint on poplar, and partly with the division of responsibility between the cabinetmaker and the finisher. January 24, 2014

Best Bit for Cedar?

Choosing a good bit to mill solid cedar boards for curved decking. May 27, 2014

Making Square and Octagonal Handrail Caps

Is a CNC router or an old-school rotary lathe the best way to machine a profiled square cap for a newel post? February 27, 2015

--- Return to Top --- View More Results

Forum Results:

Re: Is This Enough DC?
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (10/6) -- Joe Your post triggered my memory of a few Knowledge Base article ...

Re: Maple - curly / birds eye and hard maple fair market price
A message posted at WOODWEB's Value Added Wood Processing Forum (9/6) -- Renie, I use lumber like you have in my work. When I buy shorts from a door ...

Re: casehardened chair seat
A message posted at WOODWEB's Furniture Making Forum (6/6) -- Great questions and answers! First, about the board. It was bought a month ago, prior t ...

Anyone starting a new business??
A message posted at WOODWEB's Business and Management Forum (4/6) -- Read some information about this guys: http://www.woodweb.com/knowledge_base/Mar ...

Re: Installers in New England
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (4/6) -- You can post a "Seeking Services" listing at WOODWEB's Job E ...

Re: thrown under the bus............again
A message posted at WOODWEB's Business and Management Forum (3/6) -- I think Lucas may have a point here. We probably throw ourselves under the bus m ...

Re: Kilns in West Michigan
A message posted at WOODWEB's Sawing and Drying Forum (3/6) -- Derek, You may find the Kiln Drying section of our Sawing and Drying Directory to be o ...

Re: Installation market
A message posted at WOODWEB's Business and Management Forum (2/6) -- Hopefully you will get other useful suggestions with the additional information. ...

Re: Red oak laminations using West System
A message posted at WOODWEB's Adhesives Forum (2/6) -- WoodenBoat is a WOODWEB advertiser, and their listing is located in our Product Directory. You ...

WOODWEB Dust Collection Poll: What System Do You Use?
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (11/5) -- We're interested in finding out what type of dust collection setu ...

Re: How to find someone to do my drawings
A message posted at WOODWEB's CAD Forum (8/5) -- Make sure to check WOODWEB's Job Exchange's "Offering Services" listings at the link below ...

Re: IWF2014
A message posted at WOODWEB's Business and Management Forum (6/5) -- Anyone interested in meeting is welcome to stop by the WOODWEB booth (#4343) on ...

Shop Poll: What Size Is Your Shop?
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (2/5) -- We're interested in finding out the shop size of the professional ...

Shop Poll: What Size Is Your Shop?
A message posted at WOODWEB's Laminating and Solid Surfacing Forum (2/5) -- We're interested in finding out the shop size of the professional woodwor ...

Shop Poll: What Size Is Your Shop?
A message posted at WOODWEB's Value Added Wood Processing Forum (2/5) -- We're interested in finding out the shop size of the professional woodworker ...

Shop Poll: What Size Is Your Shop?
A message posted at WOODWEB's Furniture Making Forum (2/5) -- We're interested in finding out the shop size of the professional woodworkers that visi ...

Shop Poll: What Size Is Your Shop?
A message posted at WOODWEB's Solid Wood Machining Forum (2/5) -- We're interested in finding out the shop size of the professional woodworkers that ...

Shop Poll: What Size Is Your Shop?
A message posted at WOODWEB's Finishing Forum (2/5) -- We're interested in finding out the shop size of the professional woodworkers that visit WOODW ...

Shop Poll: What Size Is Your Shop?
A message posted at WOODWEB's Adhesives Forum (2/5) -- We're interested in finding out the shop size of the professional woodworkers that visit WOODW ...

Shop Poll: What Size Is Your Shop?
A message posted at WOODWEB's WOODnetWORK Forum (2/5) -- We're interested in finding out the shop size of the professional woodworkers that visit WOO ...

Shop Poll: What Size Is Your Shop?
A message posted at WOODWEB's Veneer Forum (2/5) -- We're interested in finding out the shop size of the professional woodworkers that visit WOODWEB. ...

Shop Poll: What Size Is Your Shop?
A message posted at WOODWEB's CNC Forum (2/5) -- We're interested in finding out the shop size of the professional woodworkers that visit WOODWEB. Le ...

Re: Need Cabinets made in S.Florida
A message posted at WOODWEB's Cabinetmaking Forum (2/5) -- Check out WOODWEB's Woodworker's Directory - our searchable database of woodworkers and wo ...

Re: shaoer purchase
A message posted at WOODWEB's Solid Wood Machining Forum (8/4) -- I know little to nothing about those brands except that they are not among the bett ...

Re: Water based finish on ranger board MDF
A message posted at WOODWEB's Finishing Forum (7/4) -- . Bin pigmented shellac is a favorite of mine for this application, but if you want to keep yo ...

Re: Torrification
A message posted at WOODWEB's Architectural Woodworking Forum (4/4) -- Kevin - I also would like to know more. I have heard the same things you have, ...

WOODWEB Poll: How's Business?
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (3/4) -- Since most business owners have closed out the books for 2014 by n ...

WOODWEB Poll: How's Business?
A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/4) -- Since most business owners have closed out the books for 2014 by now, we ...

WOODWEB Poll: How's Business?
A message posted at WOODWEB's Value Added Wood Processing Forum (3/4) -- Since most business owners have closed out the books for 2014 by now, we fel ...

WOODWEB Poll: How's Business?
A message posted at WOODWEB's Furniture Making Forum (3/4) -- Since most business owners have closed out the books for 2014 by now, we felt is was an ...

WOODWEB Poll: How's Business?
A message posted at WOODWEB's Solid Wood Machining Forum (3/4) -- Since most business owners have closed out the books for 2014 by now, we felt is wa ...

WOODWEB Poll: How's Business?
A message posted at WOODWEB's Sawing and Drying Forum (3/4) -- Since most business owners have closed out the books for 2014 by now, we felt is was a ...

WOODWEB Poll: How's Business?
A message posted at WOODWEB's Finishing Forum (3/4) -- Since most business owners have closed out the books for 2014 by now, we felt is was an approp ...

WOODWEB Poll: How's Business?
A message posted at WOODWEB's Forestry Forum (3/4) -- Since most business owners have closed out the books for 2014 by now, we felt is was an appropr ...

WOODWEB Poll: How's Business?
A message posted at WOODWEB's WOODnetWORK Forum (3/4) -- Since most business owners have closed out the books for 2014 by now, we felt is was an appr ...

WOODWEB Poll: How's Business?
A message posted at WOODWEB's Veneer Forum (3/4) -- Since most business owners have closed out the books for 2014 by now, we felt is was an appropria ...

WOODWEB Poll: How's Business?
A message posted at WOODWEB's CNC Forum (3/4) -- Since most business owners have closed out the books for 2014 by now, we felt is was an appropriate ...

Re: Insanely Messy Worker, wants to be Foreman, Advise?!?
A message posted at WOODWEB's Business and Management Forum (2/4) -- I once had a production manager that worked for me for 5 years. He came up throu ...

Re: Converting to a cyclone collector.
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/4) -- I had a lot of problems with the cartridge filter on my tempest cy ...

Re: slide saws
A message posted at WOODWEB's Solid Wood Machining Forum (10/3) -- Sorry Bill I disagree with you. There nothing wrong with the phenolic ways on the ...

Re: Table End Extensions
A message posted at WOODWEB's Furniture Making Forum (10/3) -- Here is a link to a past post on this subject, it's a start.... http://www.woodweb.com ...

Re: Shop Test for Job Applicants
A message posted at WOODWEB's Business and Management Forum (9/3) -- @TS: No. Nobody else (including me, who did not draw the picture) noticed. So yo ...

Re: Moulding pricing
A message posted at WOODWEB's Business and Management Forum (4/3) -- Here is a link to an excel spreadsheet from a WoodWeb post. I have used it for s ...

Re: scm Pratix S15 and Mastercam
A message posted at WOODWEB's CNC Forum (3/3) -- It is my understanding that with a correct post you should be able to connect. I am not sure what SC ...

Re: Finishing a Dining Table Top
A message posted at WOODWEB's Finishing Forum (10/2) -- Thank you for your responses. To DennyJ: Staining would sort of defeat the purpose of the ske ...

Re: Entry Door
A message posted at WOODWEB's Architectural Woodworking Forum (9/2) -- Alan, If you are set on using solid wood and can get true Honduras Mahogany (S ...

Balau Wood for Exterior Shutters
A message posted at WOODWEB's Architectural Woodworking Forum (9/2) -- One of my suppliers offers exterior components made from Balau. I have used th ...

Shop Test for Job Applicants
A message posted at WOODWEB's Business and Management Forum (9/2) -- People keep asking me for a copy of the test I use in my hiring process. I thoug ...

Re: Pulled the Trigger!
A message posted at WOODWEB's CNC Forum (9/2) -- 1. Are there any tips or modifications that I should be considering in setting up a blind dado that ...

Re: Solid table tops
A message posted at WOODWEB's Furniture Making Forum (8/2) -- Do a search on Woodweb in the Knowledge Base and thru the forums and see some good disc ...

Re: CNC Investment
A message posted at WOODWEB's Business and Management Forum (7/2) -- Dennis, You never mentioned the machine or price of the machine. Obviously there ...

Re: WOODWEB Poll: How's Business?
A message posted at WOODWEB's Forestry Forum (7/2) -- I'm so proud to see such results that business most of people in 2014 was better than projected ...

Re: Variety of Joints
A message posted at WOODWEB's Architectural Woodworking Forum (12/1) -- Woodweb needs to add a "like" button on posts like this. Very nice. ...

Re: Grizzly 1066Z drum sander-need input
A message posted at WOODWEB's Furniture Making Forum (11/1) -- The difference between almost any drum sander and a wide belt is like an electic golf ...

Re: sanding table
A message posted at WOODWEB's WOODnetWORK Forum (11/1) -- try reading the very forum you posted on. http://www.woodweb.com/cgi-bin/forums/shopbuilt.p ...

Re: Overwhelmed
A message posted at WOODWEB's Business and Management Forum (8/1) -- Paul Downs - a successful shop owner, New York Times and Woodweb contributor, ha ...

Re: WOOD MOVEMENT
A message posted at WOODWEB's Cabinetmaking Forum (7/1) -- You can use the Woodweb shrinkulator to approximate potential movement. Enter the species, ...

Re: KCD or eCabinets?
A message posted at WOODWEB's CAD Forum (3/1) -- Calvin, I have used eCabinet Systems for about 14 years now. If you are cutting on a Thermwood route ...

Re: Pitch builds on left side of blade only
A message posted at WOODWEB's Cabinetmaking Forum (1/1) -- Thank you guys for your responses. I checked out the oneway gauge and that looks like a ve ...

Re: Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/1) -- Mike - I will apologize also, but keep in mind that when I posted, I h ...

Re: can't find the right help
A message posted at WOODWEB's Business and Management Forum (12/31) -- There are many ways to drive to Tacoma from Seattle. You could, for example, h ...

Re: Trying to use pre-finished ply. interiors
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- KAP, I used to use pocket hole screws for a long time, and I was always frustrated how t ...

When should I use the log dogs?
A message posted at WOODWEB's Sawing and Drying Forum (12/31) -- I am learning and would like advice on when to use the log dogs. Clearly when the lo ...

Re: Using spray-only stains on doors with profiles and projected trim.....
A message posted at WOODWEB's Finishing Forum (12/31) -- I have been using Spray Only stains for many years on Arch. woodworking and furniture.both s ...

Re: Diminished global demand
A message posted at WOODWEB's Business and Management Forum (12/31) -- Cabmaker, That was kind of the point... we adjust our prices quarterly to acco ...

Collet nut torque settings?
A message posted at WOODWEB's CNC Forum (12/31) -- I've always been a touch concerned with how tight (or, really, how loose) we are tightening the co ...

Re: Blumotion clearances
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- We use the Movento guides (760H5500b) with 2.5mm clearances and have no issues. With the ...

Re: Blumotion clearances
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- I use the Blumotion with the 3 way adjustment and am very satisfied with them. Yes, they ...

Re: Sanding MDF for paint
A message posted at WOODWEB's Finishing Forum (12/31) -- It is time to move to the 21st century,as a finisher for the ultra high end furn.industry fo ...

Re: Aspan support question
A message posted at WOODWEB's CNC Forum (12/31) -- I did call scam and was told by the tech that they didn't support aspan anymore. He gave me the em ...

Re: wood quality
A message posted at WOODWEB's Architectural Woodworking Forum (12/31) -- When I make doors now it takes a few days to make the stiles. Find the few s ...

wood quality
A message posted at WOODWEB's Architectural Woodworking Forum (12/31) -- 30 years ago, i was taught to make 1 pc stiles and rails for exterior and in ...

Light weight panels for laminate
A message posted at WOODWEB's Architectural Woodworking Forum (12/31) -- Doing a residence that is primarily plastic laminate throughout. Have 2 1/4& ...

Re: Trying to use pre-finished ply. interiors
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Chris, Those look very interesting, but as we can see with those or pocket holes, the id ...

Re: refinishing cabinet doors
A message posted at WOODWEB's Finishing Forum (12/31) -- IMO spraying small jobs with out an explosion proof fan is not that dangerous. Keep in mind ...

Re: Aspan support question
A message posted at WOODWEB's CNC Forum (12/31) -- I've been using Alphacam since 2002, so I don't think they are going anywhere. They write code to ...

Re: refinishing cabinet doors
A message posted at WOODWEB's Finishing Forum (12/31) -- You are likely right 99% of the time Robert, until that one time when someone else comes int ...

Re: Holiday Greetings
A message posted at WOODWEB's Business and Management Forum (12/31) -- Happy holidays and Happy New Year every one. Thanks for being a great support ...

Re: Collet nut torque settings?
A message posted at WOODWEB's CNC Forum (12/31) -- Matt, When you say your using a special wrench do you mean a torque wrench? You really should be i ...

Re: Frameless to face frame
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Thanks for the explanation mike. 1/2" everything...that's interesting. I may have t ...

Re: Blumotion clearances
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Thanks for the help gentlemen. Exactly what I needed. I feel more confident now. ...

Re: Blumotion clearances
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- I use 2mm, 5/64" all the time. Never had a problem. ...

Re: Collet nut torque settings?
A message posted at WOODWEB's CNC Forum (12/31) -- Here are some torque settings for various collets. ...

Re: End Grain Top Cupping
A message posted at WOODWEB's Architectural Woodworking Forum (12/31) -- To extend Joe's suggestions: placing a simple sheet of corrugated cardboard ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/31) -- Thanks again all, I have read, reread, and re-reread this thread, and will pro ...

Re: Making a sleeve from collector to trash can
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/31) -- Make a simple dust bag that goes from your fan exhaust to trash ...

Re: End Grain Top Cupping
A message posted at WOODWEB's Architectural Woodworking Forum (12/31) -- I'll agree with all of the cause and effect due to RH / MC and think besides ...

Re: Microvellum issues/optional software
A message posted at WOODWEB's CAD Forum (12/31) -- I have been a MV user for 10 years. I was such a fan of MV and an advocate for them. I am still on ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/31) -- It's been a long while since I ran a 3 man operation, but if I had followed Ji ...

checks in maple paper backed veneer doors
A message posted at WOODWEB's Veneer Forum (12/31) -- I have some small checks showing up(along grain and slightly raised) on maple paper back veneer ...

New York Times Business Section
A message posted at WOODWEB's Business and Management Forum (12/31) -- The New York Times ran an interesting article in the business section a couple ...

Re: Pitch builds on left side of blade only
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- I generally joint, rip, then gang up pieces and run them through the planer with good re ...

Pitch builds on left side of blade only
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Why is it that my saw blade always gets pitch build up on the left side only? I have mea ...

Scraps
A message posted at WOODWEB's Solid Wood Machining Forum (12/31) -- Other people who run moulders for mouldings, what are you doing with all the wast ...

Re: Haunching tenons
A message posted at WOODWEB's Architectural Woodworking Forum (12/31) -- my understanding of the term"relish" comes from timber framing. it ...

Re: Pitch builds on left side of blade only
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- The only way to be sure your blade isn't healing is to use a dial indicator. I like the ...

Re: How to check for squareness on a panel saw
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- I think your referring to what is called a 5 cut. Take a large panel and trim 1/4" ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/31) -- Concerning your comment about trying to get everyone to show up on time: I hav ...

moulder hold down options
A message posted at WOODWEB's Solid Wood Machining Forum (12/31) -- I am looking for some help on how to make up custom hold downs after final top he ...

Re: Is it worth it to order pre-cut drawers?
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- a qualified professional would want to source their own drawers. They will have the expe ...

Re: Pattern Systems/Biesse Rover
A message posted at WOODWEB's CNC Forum (12/31) -- Unless you go with Biesse software you will need to use the WRT package within the the wrt softwar ...

Re: pine/spruce stakes
A message posted at WOODWEB's Sawing and Drying Forum (12/31) -- so if a person would use the knottier pieces for a pallet operation then have clears ...

Re: Solidworks vs Inventor =%20Ford vs Chevy?
A message posted at WOODWEB's CAD Forum (12/31) -- Many Autodesk users , have transitioned to Autodesk Inventor . The ease of use as well as the exce ...

Re: New York Times Business Section
A message posted at WOODWEB's Business and Management Forum (12/31) -- That is good to know, I usually just read the Paul Krugman column. This is a p ...

Re: HolzHer Edgbander Glue problems
A message posted at WOODWEB's WOODnetWORK Forum (12/31) -- You may have contaminates still in the glue station that re-plug the holes after you remov ...

Is it worth it to order pre-cut drawers?
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Hello, I am going to be remodeling my kitchen and have yet to hire a contractor. In my r ...

Re: Microvellum issues/optional software
A message posted at WOODWEB's CAD Forum (12/31) -- Oh and this forum is the 1st time I have ever heard of the Microvellum advisory group! They had th ...

Re: How to check for squareness on a panel saw
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Don't neglect checking for square between the panel face and edge too, as that will affe ...

Re: Cutter head
A message posted at WOODWEB's Architectural Woodworking Forum (12/31) -- Hi Steve: Depending upon the dimensions you need, we may (or may not) have t ...

Re: what type of sawmill
A message posted at WOODWEB's Sawing and Drying Forum (12/31) -- I like Dave's idea of visit the Hearne Hardwoods, and maybe even take that log you m ...

How to check for squareness on a panel saw
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Guys, i got a holzher1265 panelsaw and was wondering how to check it for 100% squareness ...

Re: Is it worth it to order pre-cut drawers?
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- I'll assume you're building the cabinets...correct? Price it both ways and see if it pen ...

Re: HolzHer Edgbander Glue problems
A message posted at WOODWEB's WOODnetWORK Forum (12/31) -- The best practice is to always call our tech support line first 704-587-3400. By calling i ...

Finishing Rack For Drawer Fronts
A message posted at WOODWEB's Finishing Forum (12/31) -- We have a product that requires us to finish thousands of drawer fronts. Currently we have t ...

HELP - Tung Oil
A message posted at WOODWEB's Finishing Forum (12/31) -- Hello all , I dont have much practice with tung oil but is it supposed to have a very dull s ...

Re: Edgebander glue pellet life span
A message posted at WOODWEB's Adhesives Forum (12/31) -- Be careful of reheating your glue time and time again. We have been having issues with glue ...

Re: HELP - Tung Oil
A message posted at WOODWEB's Finishing Forum (12/31) -- Tung oil will not shine like a gloss film build finish, but I have had some success buffing ...

Re: what type of sawmill
A message posted at WOODWEB's Sawing and Drying Forum (12/31) -- Your logs keep getting bigger! Visit the Hearne Hardwoods web site http://www.hearne ...

Re: End Grain Top Cupping
A message posted at WOODWEB's Architectural Woodworking Forum (12/31) -- We sometimes have stacks of glued up panels in the shop. If they are hanging ...

Anyone Recognize this Hardware?
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Looking to match this hardware, but having a hard time figuring out what it is. Home is ...

Rifle stock
A message posted at WOODWEB's Finishing Forum (12/31) -- What would be a very nice finish to use on a rifle stock? It's a 1940 mossberg .22 walnut no ...

Re: Pulling hair out over 3 phase
A message posted at WOODWEB's Solid Wood Machining Forum (12/31) -- I am not expert but I would put a transformer. The CNC manufacturer will specify ...

Re: Is it worth it to order pre-cut drawers?
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Depends on the shops efficiency and tooling. We are set up for it so we make all of our ...

Re: How to check for squareness on a panel saw
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Now that I read your comment that is how I remember them showing how to do it . Just bou ...

Re: Banding
A message posted at WOODWEB's Adhesives Forum (12/31) -- I have also had this issue. I've had banding fall off an entire job. It's very embarrassing ...

Re: How to check for squareness on a panel saw
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Doni, You may find these troubleshooting documents helpful. Of course, you will have to ...

Re: How to check for squareness on a panel saw
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- ...to add to Chris' excellent description, you can alternatively mic each end of that cu ...

Re: Is it worth it to order pre-cut drawers?
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Blake, this is not a homeowner or do it yourself site. You might want to look at Fine Wo ...

Re: How to check for squareness on a panel saw
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Very true , if edge is not perfectly square the pressure from bander will chip the melam ...

Re: anybody know of a GOOD edgebander technician in Dallas Area?
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Give me a ring and I'll see if I can help you out. 706-973-9909. Jerry ...

Re: Spindle sander
A message posted at WOODWEB's Solid Wood Machining Forum (12/31) -- Second vote for the grizzly. I actually found it surprisingly well built and it s ...

Re: stainless steel inlays gone wrong
A message posted at WOODWEB's Architectural Woodworking Forum (12/31) -- Need more info. Are you inlaying cross grain on a solid wood top? If so you ...

Re: Books - Sawing & Drying
A message posted at WOODWEB's Sawing and Drying Forum (12/31) -- Hocking College in Nelsonville Ohio? former home of the Paul Bunyan Show in Ohio. ...

Re: Making a sleeve from collector to trash can
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/31) -- Thanks! I will try just that! Happy New Year ...

Re: Rifle stock
A message posted at WOODWEB's Finishing Forum (12/31) -- I build custom gun stocks and I use about 10 coats of true oil on mine. Hope this helps. Mic ...

Re: Is it worth it to order pre-cut drawers?
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Ah, ok, thanks for the replies and I'll ask over there. ...

Re: Solidworks vs Inventor =%20Ford vs Chevy?
A message posted at WOODWEB's CAD Forum (12/31) -- How could anyone doubt a poster named super steve? ...

Re: Anyone Recognize this Hardware?
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Bingo! Thanks for the rec., Michael. ...

Re: Anyone Recognize this Hardware?
A message posted at WOODWEB's Cabinetmaking Forum (12/31) -- Try Hardware Resources. ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/31) -- Relevant ...

Re: Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/31) -- I agree with Jim on all counts. It is not Jim that is really against ...

Re: Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/31) -- Mike, I have done this on many occasions and its not an amateur appr ...

Re: Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/31) -- Jim - you seem really against this practice. If your client requests ...

Re: Old sycamore
A message posted at WOODWEB's Sawing and Drying Forum (12/31) -- I have to wonder if those of you who recommend cutting wide plain sawn slabs, are in ...

Re: Cracked Laminate
A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/31) -- As previously stated, inside corners should never be squared. As for pe ...

Re: Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/31) -- In classical arcitecture, crown molding is a component part of the l ...

Re: Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/31) -- I must say... It ceases to amaze me how my original, thought to be s ...

Re: Old sycamore
A message posted at WOODWEB's Sawing and Drying Forum (12/31) -- Best of luck Dave! Experience with 10,000 y.o. swamp kauri tells me you are in for a ...

Re: Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/31) -- The second drawing should say 3" / 12" instead of feet lik ...

Re: Veneer Seam Showing After Finishing
A message posted at WOODWEB's Veneer Forum (12/31) -- Hi All, Thanks for the help! Charles I dropped in lacquer like you suggested and it was a big i ...

Re: Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/31) -- Here is and Example of what Dave is explaining, the angle's change d ...

3d dxf mesh file for clothes
A message posted at WOODWEB's CAD Forum (12/31) -- Can anyone help me with finding some clothing accessories for my closet program? kcd tells me i ca ...

Re: Beaded doors
A message posted at WOODWEB's Solid Wood Machining Forum (12/31) -- Well, that looks funny. Press view larger image to get correct perspective. ...

Re: Beaded doors
A message posted at WOODWEB's Solid Wood Machining Forum (12/31) -- Haunched Cope and stick will do the trick ...

Re: creating spiral rope design in columns
A message posted at WOODWEB's WOODnetWORK Forum (12/31) -- I have made many spiral turnings on a special lathe. The machine would be too small to use ...

Re: creating spiral rope design in columns
A message posted at WOODWEB's WOODnetWORK Forum (12/31) -- Thanks for this advice which gives me some very basic ideas as to the layout of the spiral ...

Re: Glueing stainless steel to wood
A message posted at WOODWEB's Adhesives Forum (12/31) -- Abrade the stainless with 60 or 80 grit hand paper. Bond it down with a true poly adhesive l ...

Re: Question about differential expansion of lumber
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- Your questions would require quite a bit of writing to answer them completely. So, here ...

Re: Question about differential expansion of lumber
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- I won't have the definitive answer for your questions, but I think I can clear up a few ...

Question about differential expansion of lumber
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- I found this succinct discussion about wood movement on a blog about buckboard wagons. T ...

Re: Unlicensed Contractors
A message posted at WOODWEB's Business and Management Forum (10/31) -- It has helped me in the past to use PR when dealing with customers. Which is p ...

Re: nailing 1 3/8 Jatoba flooring directly to joists
A message posted at WOODWEB's Architectural Woodworking Forum (10/31) -- No question that pre-boring is essential for jatoba wood. It is very dense a ...

Re: Economic lot size
A message posted at WOODWEB's CNC Forum (10/31) -- I subscribe to the flow model. Our software can be set to try and complete all the parts for one c ...

Re: EDGEBANDER GLUE
A message posted at WOODWEB's Adhesives Forum (10/31) -- Alden, If you are getting a glue pot bander, it is a pain to change colors, unless you have ...

Re: Question about differential expansion of lumber
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- Gene, I think you are right about not getting too carried away with some of the sappy be ...

Re: Question about differential expansion of lumber
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- A couple of more questions: 1) Am I correct in assuming that the growth rings are essent ...

Re: Question about differential expansion of lumber
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- The dark ring is due to cell wall size and not anything with the bark. Actually, some sp ...

Re: Shop employees start time
A message posted at WOODWEB's Business and Management Forum (10/31) -- I have people starting at many different times throughout the day. People star ...

Re: Unlicensed Contractors
A message posted at WOODWEB's Business and Management Forum (10/31) -- I am here at the northern most part of southern california( ventura county) an ...

Re: nailing 1 3/8 Jatoba flooring directly to joists
A message posted at WOODWEB's Architectural Woodworking Forum (10/31) -- Thank you Gene. Had already made the decision to go with screws into pre bor ...

Re: Shop employees start time
A message posted at WOODWEB's Business and Management Forum (10/31) -- Thanks for all the Great feedback! I dont know how this thread was created twi ...

Re: SW Conversion Varnish, 2K Poly over Shellac
A message posted at WOODWEB's Finishing Forum (10/31) -- There are many finishers who use catalyzed finishes over shellac but I am not one of them. O ...

Re: Question about differential expansion of lumber
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- Thanks Gene. That's interesting about the bi-polar molecules and magnetic-like attractio ...

Re: Unlicensed Contractors
A message posted at WOODWEB's Business and Management Forum (10/31) -- We've all been down this road. You might want to help the client understand yo ...

Re: Question about differential expansion of lumber
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- Thanks David. That was a great response. I am curious about this because I am trying to ...

Re: Hess Mobil glue joint
A message posted at WOODWEB's Architectural Woodworking Forum (10/31) -- Seems like if it's always the back edge the platen may have a bit of a twist ...

Re: EDGEBANDER GLUE
A message posted at WOODWEB's Adhesives Forum (10/31) -- I dont mean to steal the thread but i did not find any place to post it else In anticipation ...

Re: finish edges of new kitchen cabinets
A message posted at WOODWEB's Finishing Forum (10/31) -- You don't say what the finish or the sheen is is on the rest of the cabinets but I have had ...

Re: Unlicensed Contractors
A message posted at WOODWEB's Business and Management Forum (10/31) -- "Pat, "Something Off" it was probably the smog, did they have s ...

Re: Competition
A message posted at WOODWEB's Business and Management Forum (10/31) -- Cabinetmaker, I agree that your only real competition should be yourself. Stri ...

Re: Competition
A message posted at WOODWEB's Business and Management Forum (10/31) -- Why doesn't the employee work for the other company? Is your employee going to ...

Re: Shop employees start time
A message posted at WOODWEB's Business and Management Forum (10/31) -- Good post to a common problem. Necessary rules: No one works alone, they must ...

Re: Unlicensed Contractors
A message posted at WOODWEB's Business and Management Forum (10/31) -- The Rich folk out here love to hire illegals almost as if it is a charitable c ...

Re: Bosch or festool jigsaw
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- Festool is the sh!t...some of their tools are overrated but generally they are a way bet ...

Re: Hess Mobil glue joint
A message posted at WOODWEB's Architectural Woodworking Forum (10/31) -- Bill there seems to be no pattern, other than is almost always back edge. Do ...

Re: Unlicensed Contractors
A message posted at WOODWEB's Business and Management Forum (10/31) -- Randy- I have been at this a long time. Clients get all kinds of prices and th ...

Re: Competition
A message posted at WOODWEB's Business and Management Forum (10/31) -- Concentrate with the work and ideas in your four walls, the contact with your ...

Re: Solid walnut countertop
A message posted at WOODWEB's Architectural Woodworking Forum (10/31) -- According to the people I asked about them, they are a real ball-ache, becua ...

Finishing Bamboo Rods
A message posted at WOODWEB's Finishing Forum (10/31) -- Finishing a bamboo rod has always been labor and time intensive. An old salt offered up that ...

Re: Bosch or festool jigsaw
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- we have a lot of different manufacturers. I have the top of the line Bosch in my persona ...

Re: Refinishing conversion varnish
A message posted at WOODWEB's Finishing Forum (10/31) -- To save the work of grinding so much finish off I would just thoroughly clean and degrease, ...

Re: Polishing CV finish
A message posted at WOODWEB's Finishing Forum (10/31) -- I posted a 3 part series of the step by step process on a high gloss conference table I did ...

Re: Question about acrylic
A message posted at WOODWEB's Finishing Forum (10/31) -- In order to meet code I would think a wooden hood would have to be far enough away from the ...

Re: Stain Applicator
A message posted at WOODWEB's Finishing Forum (10/31) -- 3M PPS system on a cup gun or a pressure pot system. Use VERY low pressure, just like a huds ...

Re: Polishing CV finish
A message posted at WOODWEB's Finishing Forum (10/31) -- To answer your original question, you have to be VERY careful buffing CV or you will wet san ...

Re: Unlicensed Contractors
A message posted at WOODWEB's Business and Management Forum (10/31) -- Yes you may get the call for fixing the shotty work but how many of you have e ...

Re: SW Conversion Varnish, 2K Poly over Shellac
A message posted at WOODWEB's Finishing Forum (10/31) -- I really like GF's HP Poly for it's UV package, but their Enduro Clear Poly is much harder a ...

Re: Dispensing thinners from 5g cans? Hand pumps?
A message posted at WOODWEB's Finishing Forum (10/31) -- We had 8 of these for the solvents we used daily. They were in our air supplied, vented, fir ...

Re: Altendorf China
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- I wouldn't hesitate either. I think the f45s are WAY overpriced unless you do high produ ...

Re: Unlicensed Contractors
A message posted at WOODWEB's Business and Management Forum (10/31) -- "I was born in LA" So you are not a genuine Corn-husker. I knew ther ...

Re: Finishing Bamboo Rods
A message posted at WOODWEB's Finishing Forum (10/31) -- If you are building these rods (very time consuming I believe) why would you want to take a ...

Re: Unlicensed Contractors
A message posted at WOODWEB's Business and Management Forum (10/31) -- Pat, "Something Off" it was probably the smog, did they have smog th ...

Re: Competition
A message posted at WOODWEB's Business and Management Forum (10/31) -- Don't waste your time worrying about things that are beyond your control. ...

Re: lacquer sheens
A message posted at WOODWEB's Finishing Forum (10/31) -- This is always a decision for the owner or designer. Make samples, get signatures. ...

Re: Biesse routers , a good choice
A message posted at WOODWEB's CNC Forum (10/31) -- Yep. Kudos to parts and service. Always there, banders, dowelers, cnc routers. ...

Re: Competition
A message posted at WOODWEB's Business and Management Forum (10/31) -- He's batting for the other team. How complicated is this? ...

Re: weinig rebate cutter, advantage? removal?
A message posted at WOODWEB's Solid Wood Machining Forum (10/31) -- Craig Great question, Older machines 80's or 90's used to have an adjustable infe ...

Re: weinig rebate cutter, advantage? removal?
A message posted at WOODWEB's Solid Wood Machining Forum (10/31) -- Personally and professionally I have seen little to no advantage to the rebate fe ...

Re: conflicting info on scrapper and buffer stations on bander
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- I think you need to change your methods. Band as soon as possible after cutting panels. ...

Banding
A message posted at WOODWEB's Adhesives Forum (10/31) -- Good morning My shop is a frameless shop that does both commercial and residential work. My ...

Anyone make stop flutes on their moulder?
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- We make a lot of tall pilasters usually with flutes or beads, we do it on a williams and ...

Re: conflicting info on scrapper and buffer stations on bander
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- There are two totally different "scrappers" sold on banders. The radius scrape ...

Re: Machinery
A message posted at WOODWEB's Adhesives Forum (10/31) -- About 8 years ago I was @ the IWF show and looked @ edgesanders. PowerMatic was there and ju ...

Re: Grizzly 1066Z drum sander-need input
A message posted at WOODWEB's Furniture Making Forum (10/31) -- If that is your only option for a sander, I would continue to outsource it to the wid ...

Re: Bubinga finishing techniques
A message posted at WOODWEB's Architectural Woodworking Forum (10/31) -- Almost all premium building materials change with time, and it is considered ...

Re: conflicting info on scrapper and buffer stations on bander
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- Thanks for the response everyone. I wonder if the " solution" sprayers are aft ...

Re: Grizzly 1066Z drum sander-need input
A message posted at WOODWEB's Furniture Making Forum (10/31) -- I have a 16-32, 1 1/2 hp, Performax and it is a toy compared to a wide belt sander. W ...

Re: 2 Mil VS. 3 Mil Edgebanding
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- Thanks everyone for your responses. We've always found the 3Mil to be very durable, and ...

Re: 2 Mil VS. 3 Mil Edgebanding
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- We just switched our 3mm radius blades to 2mm as running the 3mm blades gave us an oval ...

Re: curved stair handail questions for professionals
A message posted at WOODWEB's Architectural Woodworking Forum (10/31) -- Dave, you sound a bit syndical, frustrated and perhaps angry. "Welcome ...

Re: weinig rebate cutter, advantage? removal?
A message posted at WOODWEB's Solid Wood Machining Forum (10/31) -- So it really just helps with a few inches of support? AFAIA US sold weinig moulde ...

Grizzly 1066Z drum sander-need input
A message posted at WOODWEB's Furniture Making Forum (10/31) -- Our shop processes a lot of live edge slabs for other cabinetmakers. We flatten them ...

Re: Anyone make stop flutes on their moulder?
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- Derek has the right answer here in my opinion. Easy to stagger the flutes if need be and ...

Re: 3PH Timesaver in 1PH shop?
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- I was seconds away from pulling the trigger on a new powermatic line boring machine a co ...

Re: Through tenon modern tables
A message posted at WOODWEB's Furniture Making Forum (10/31) -- By and large the span of the mortise and tenon is identified with the thickness of th ...

Re: weinig rebate cutter, advantage? removal?
A message posted at WOODWEB's Solid Wood Machining Forum (10/31) -- I suspect the reason they do this is that in Europe they run a lot more smaller l ...

Bubinga finishing techniques
A message posted at WOODWEB's Architectural Woodworking Forum (10/31) -- I am involved with a project that we are considering natural finished Bubing ...

Re: Machinery
A message posted at WOODWEB's Adhesives Forum (10/31) -- Thanks for the heads up, Larry. I'm actually replacing a Grizzly edgesander (smaller model). ...

Re: Anyone make stop flutes on their moulder?
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- The stopped molder method would leave a different end result than you original. method. ...

Re: 3PH Timesaver in 1PH shop?
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- The comment about having a wild leg applies to delta wired systems typically 240 V. Our ...

Re: conflicting info on scrapper and buffer stations on bander
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- Wow, that is hard to believe, where is your shop that you are ending up with that kind o ...

Re: need help making this firewood basket
A message posted at WOODWEB's Furniture Making Forum (10/31) -- You've presumably known about a log holder and you've most likely become aware of a k ...

Reducing prep time
A message posted at WOODWEB's Finishing Forum (10/31) -- Hi All I need to reduce my prep/sanding time. I have been looking at the smaller Supermax br ...

Re: Bubinga finishing techniques
A message posted at WOODWEB's Architectural Woodworking Forum (10/31) -- If your customer is particular about what the wood will age to, you may be i ...

Re: slatwall aluminum inserts
A message posted at WOODWEB's Architectural Woodworking Forum (10/31) -- Capitol Store Fixtures stocks it, other wise space wall. I probably have 2-4 ...

Re: 3PH Timesaver in 1PH shop?
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- I have a homemade one from guy that makes them ( Anderson ) it came with a 5 hp motor th ...

Re: import .tpa into genesis question
A message posted at WOODWEB's CNC Forum (10/31) -- Matthew, Not sure if you are still looking for an answer or not. The file type .tpa is not associa ...

Garden window
A message posted at WOODWEB's Architectural Woodworking Forum (10/31) -- I've been asked to make a small garden window. What is the best method or de ...

Re: Anyone make stop flutes on their moulder?
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- I realize that Tyler, I'm not fond of the stopped abruptly look with the way im doing it ...

Re: Straight lining
A message posted at WOODWEB's Solid Wood Machining Forum (10/31) -- Dave, Before I got a SLR I used to straight line on my slider. With a 10' slider ...

Re: Virginia Tech: Vacuum Drying Workshop
A message posted at WOODWEB's Sawing and Drying Forum (10/31) -- I will be making a presentation. I will try to answer a lot of questions and deliver ...

Re: Caulking Panels in Entry Doors
A message posted at WOODWEB's Architectural Woodworking Forum (10/31) -- You can go to the Alpine Techinical Workshop in Ouray, CO. http://www.alpine ...

Re: Banding
A message posted at WOODWEB's Adhesives Forum (10/31) -- We haven't had any problems with the multi-layer veneer banding 1.6+-, that we know of. We u ...

Re: Best Hole saw
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- Why is anyone making 3" diameter holes anymore? With all the wireless devices out t ...

Brandt edgebander question
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- The end-round (not top & bottom) trim unit on our Brandt KD350 moves too slowly into ...

Re: 2 Mil VS. 3 Mil Edgebanding
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- "3mil is going to be phased out in a few years." New to me. We use a lot of it ...

Re: Anyone make stop flutes on their moulder?
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- You would have to be quick with the adjustments or you would burn the wood. I've only do ...

Re: slatwall aluminum inserts
A message posted at WOODWEB's Architectural Woodworking Forum (10/31) -- Don't know about your location, just a note of caution, there are different ...

Re: need help making this firewood basket
A message posted at WOODWEB's Furniture Making Forum (10/31) -- Thank you all. I researched how to steam bend with a pvc pipe and wallpaper remover s ...

Re: ML Campbell Waterborne Millwork Primer for Exterior Doors?
A message posted at WOODWEB's Finishing Forum (10/31) -- If this is at all similar to what comes on pre primed trim now, it is awful for exterior tri ...

Re: File Drawer Locks
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- A log chain with a master lock , Home Depot uses same set up for riding lawnmowers so sh ...

Re: Machinery
A message posted at WOODWEB's Adhesives Forum (10/31) -- 32" X 78" OA you could save 11" if you took the end table & support brack ...

Re: Anyone make stop flutes on their moulder?
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- I agree rich. The guy in the video didn't have any burns, maybe because of the slower rp ...

Re: programs from genesis to xilog3?
A message posted at WOODWEB's CNC Forum (10/31) -- Matthew, If you havent already written the programs, message me directly. I may have a solution. B ...

Re: Anyone make stop flutes on their moulder?
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- The best way to do stopped flutes is with a molder head on the tablesaw. ...

Re: Best Hole saw
A message posted at WOODWEB's Cabinetmaking Forum (10/31) -- yea 3" are kinda ugly looking , I use 2" my self , in black of course . ...

Re: Machinery
A message posted at WOODWEB's Adhesives Forum (10/31) -- Just what I couldn't find out on the mfg's websites. Thanks for the info. ...

Re: pigmented pre-cats / post-cats
A message posted at WOODWEB's Finishing Forum (10/31) -- o.k. got it . thanks for the reply Mike . ...

Re: Silicone membrane
A message posted at WOODWEB's Veneer Forum (10/31) -- Practically speaking you have 3 choices: Vinyl, Urethane and Silicone. We have a production for ...

Re: Historic furniture price comparisons
A message posted at WOODWEB's Furniture Making Forum (10/31) -- Not necessarily. The evolution is linear - price driven down as unit costs go down du ...

Re: milling squareness problem
A message posted at WOODWEB's Solid Wood Machining Forum (10/31) -- Solved it! Turns out a couple of my jointer knives had slipped very slightly. Equ ...

Re: What adhesive to use?
A message posted at WOODWEB's Adhesives Forum (10/31) -- I think I would try using a medium viscosity CA. You should be able to work enough up under ...

Re: epoxy vs glue
A message posted at WOODWEB's Adhesives Forum (10/31) -- A cool way of developing equal pressure across the part is to use negative air pressure. if ...

Re: milling squareness problem
A message posted at WOODWEB's Solid Wood Machining Forum (10/31) -- Good news. I will add that I never had a joiner that would hold the fence at 90 d ...

Re: sweet gum
A message posted at WOODWEB's Value Added Wood Processing Forum (10/31) -- as a sawyer that cut sweetgum when I can get it, I have 2 ways of drying i ...

Re: Historic furniture price comparisons
A message posted at WOODWEB's Furniture Making Forum (10/31) -- Thanks, David. I think that it's safe to say that chairs have been fairly common in t ...

Re: volume gluing-up
A message posted at WOODWEB's Solid Wood Machining Forum (10/31) -- Kind of vague, what kind of volume, what kind of wood, what kind of glue? You hav ...

Re: Dent in Joos hot press platen
A message posted at WOODWEB's Veneer Forum (10/31) -- i have worked with 400 ton press and a few layers of duct tape applied in the dent will fill it ...

Re: Silicone membrane
A message posted at WOODWEB's Veneer Forum (10/31) -- Usually silicone is used for applications in which the material has been heated (solid surface) ...

pmk 1205
A message posted at WOODWEB's Solid Wood Machining Forum (10/31) -- i am looking at a pmk 1205 coping machine. would like to hear comments & opin ...

Re: Silicone membrane
A message posted at WOODWEB's Veneer Forum (10/31) -- Try aero-tech out of new york. Silicone works better. Elasticity allows you to do curved work e ...

Re: Silicone membrane
A message posted at WOODWEB's Veneer Forum (10/31) -- thanks for helping Dan i just started the ball rolling, but happy to share my meager knowledge. ...

Re: Mystery sheet
A message posted at WOODWEB's Laminating and Solid Surfacing Forum (10/31) -- Could be Citadel Panel 20, check that. ...

Re: Silicone membrane
A message posted at WOODWEB's Veneer Forum (10/31) -- Urethane sheets ...

Re: Clamping Cauls & Veneer
A message posted at WOODWEB's Veneer Forum (10/31) -- If you're only using 1 sheet of mdf on each face of your panel you want to space 2" cauls ...

Downsizing System Quandry
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/31) -- So I lost my big shop with a 25hp Farr and real nice K&B pipe ...

Re: SurfPrep or Festool sander?
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- I used nothing but Festool sanders until about 2 years ago. My local supplier stopped by ...

Makita Planer Blade installation
A message posted at WOODWEB's Solid Wood Machining Forum (8/31) -- I use Makita Handheld planers for years, 1804N and 1805N. And recently bought Maki ...

Employee Compensation
A message posted at WOODWEB's Business and Management Forum (8/31) -- I'm curious to know if our pay rates would be considered over/under/equal to co ...

Re: SurfPrep or Festool sander?
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- We started using a surfprep air sander for sealer sanding a few months ago. It works grea ...

Re: percentage for a sales man
A message posted at WOODWEB's Business and Management Forum (8/31) -- 5% The problem is lead generation, as in who is responsible for lead generation ...

SurfPrep or Festool sander?
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- About 2 years ago, I switched from Dynabrade air sanders to the Mirka Ceros electric sand ...

Brandt or SCM
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- I was just at IWF last week looking for a new edgebander. When I left the show I was dete ...

Re: What species of wood are you using for painted cabinets?
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- Soft maple with glued in mdf panels. Poplar used to grow like a weed. Now with all the ex ...

Re: Inserting Rafix
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- While I haven't used Rafix for some time, it was an excuse to play. The toggle clamp has ...

Re: Alphacam
A message posted at WOODWEB's CNC Forum (8/31) -- Thanks for your response. Computer 2 was working fine at one time, so I assume it would have the co ...

Re: how much would you pay?
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- Check the bearings. We had an old SCMI back in the 90's that ate them by the year. Also c ...

Re: Scm Sandya 3
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- Scott, Does your machine have shoes, pinchrolls or both? Normally when it comes to snipin ...

Disposal of booth exhaust filters?
A message posted at WOODWEB's Finishing Forum (8/31) -- I am wondering what most shops are doing when they dispose of their spray booth filters? I am ...

Re: HPL on an edgebander
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- I think that a negative rake tooth would be more ideal for hpl as its cutting against the ...

Re: glass inserts for slab doors
A message posted at WOODWEB's CNC Forum (8/31) -- Generally against small CNC's, but it will work for this. You're going to need a tool changer. Make ...

Re: IWF Show
A message posted at WOODWEB's Business and Management Forum (8/31) -- Hi Gary. Try youtube, probably the largest volume of information regarding cobo ...

Re: Detached toe kicks
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/31) -- I second the notion, Hiccup. No really, 1- 1 1/2" over 12 feet i ...

Re: SurfPrep or Festool sander?
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- Hey Joe, I hear everyone talking about sanding in between coats of sealer and finish coat ...

Re: Does Fastenlink work?
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- That looks cool. How do they accommodate different thickness material? How much are the f ...

Re: Tooling- source for router bits for stair stringers?
A message posted at WOODWEB's Architectural Woodworking Forum (8/31) -- I'll second CT Saw & Tool for tooling needs. I've been using them for 20 ...

Re: IWF Show
A message posted at WOODWEB's Business and Management Forum (8/31) -- Blaine, Can you post a link where I can learn more? I goggled Cobots, and only ...

percentage for a sales man
A message posted at WOODWEB's Business and Management Forum (8/31) -- my shop needs to hire a sales man to get more kitchen work. how much of a perce ...

Re: sander dust extractor
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/31) -- I just picked up a Karcher vac. They are OEM for Fein. Not enough ...

How much money do you have in the bank?
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- Without debt that is. Just wondering if I will always be 10k in the clear as that has bee ...

Re: Brandt or SCM
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- Do yourself a favor. Force them to demonstrate the machine in front of you. Look at the e ...

Re: SCMI basic 1 edgebander not running correctly
A message posted at WOODWEB's Solid Wood Machining Forum (8/31) -- Wired correctly? Tried swapping two of the hots? Track belt running correct direct ...

Re: HPL on an edgebander
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- Seems to be atp blades. 20 teeth. Don't know how old, I bought the machine used. ...

Re: Disposal of booth exhaust filters?
A message posted at WOODWEB's Finishing Forum (8/31) -- I throw them away. When the paint dries it's considered inert. ...

Re: Alphacam
A message posted at WOODWEB's CNC Forum (8/31) -- Hello, are u using RS232 and transfer over Alphaedit? Or transfer is over some USB Stick? ...

Re: percentage for a sales man
A message posted at WOODWEB's Business and Management Forum (8/31) -- I would think 5 to 7% of gross is about right. ...

Re: Alphacam
A message posted at WOODWEB's CNC Forum (8/31) -- Could you please send me code from PC1 and PC2 on my email? msskotak@gmail.com ...

Re: Nice appliance specs
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- I had an old turquoise refrigerator once. It was so worn out that one day while eating lu ...

Nice appliance specs
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- This is a quick shout out to Wolf/Subzero for the best appliance specs in the industry. T ...

Vinyl Sealer Problems on Mitered Doors
A message posted at WOODWEB's Finishing Forum (8/31) -- We are having a recurring finish problem on a certain mitered door. The problem exist only on ...

Edgebander Glue
A message posted at WOODWEB's Adhesives Forum (8/31) -- I HAVE 3 EDGEBANDERS 2 HOLZHER CONTRIGA 1368, AND ONE BIESSE ROXYL 5.5. WE ARE USING DORUS 21 ...

Re: Green White Oak
A message posted at WOODWEB's Architectural Woodworking Forum (8/31) -- The green oak should be dry enough on the surface to take a light stain withi ...

Re: Paul Downs Book
A message posted at WOODWEB's Business and Management Forum (8/31) -- HI Tim, Thanks for the kind words. As for the rest of the story, we're continui ...

Plastic spice trays
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- I use the cut to size plastic spice drawer trays from time to time. I've never been happy ...

Re: EDGEBANDER GLUE
A message posted at WOODWEB's Adhesives Forum (8/31) -- the film on the back of the laminate is your issue. As far as i know you will always need to ...

Azobe Decking
A message posted at WOODWEB's WOODnetWORK Forum (8/31) -- Hey There I needed some info on Azobe or Ekki wood. any one know how it performs in extreme ...

painting cabinets
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/31) -- I just started building cabinets and I have never painted cabinets be ...

Re: Soft close undermount drawer guides
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- I get the occasional problem or glitch with the salices. Never any problem with the blums ...

Re: Can I dry wood too much
A message posted at WOODWEB's Sawing and Drying Forum (8/31) -- When the fans are off, the hot air is not pushed into the load of lumber, so the wood ...

Re: Soft close undermount drawer guides
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- Thanks JB and JR Lee. That is the type of information I was looking for. ...

Re: Paul Downs Book
A message posted at WOODWEB's Business and Management Forum (8/31) -- Forbes is a much better venue, might give you a different perspective? ...

table extension slides
A message posted at WOODWEB's Furniture Making Forum (8/31) -- I am looking for a supplier for Hettich table extension slides in the US ...

Re: Soft close undermount drawer guides
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- Blum Tandem soft close for 10 years - no call backs ...

Re: Vinyl Sealer Problems on Mitered Doors
A message posted at WOODWEB's Finishing Forum (8/31) -- Don't do the second coat of Vinyl Sealer. ...

Re: TORX Screw heads in woodwork production
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- Duster...Kreg makes great bits. ...

Re: Soft close undermount drawer guides
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- zero callback on grass dynapro. ...

Re: Nice appliance specs
A message posted at WOODWEB's Cabinetmaking Forum (8/31) -- Amen to that. ...

Missing a deadline in a big way, how would you handle this?
A message posted at WOODWEB's Business and Management Forum (8/31) -- Well I've finally stuck my foot in it deep enough that I'll need more than a ga ...

Re: Missing a deadline in a big way, how would you handle this?
A message posted at WOODWEB's Business and Management Forum (8/31) -- If you are disciplined you can make use of an inexperienced helper. Maybe even ...

Re: Missing a deadline in a big way, how would you handle this?
A message posted at WOODWEB's Business and Management Forum (8/31) -- Anyone who says they have not been in this position before is lying... #1 outso ...

Re: RE: Root Ball
A message posted at WOODWEB's Sawing and Drying Forum (8/31) -- I would only go to the trouble if you have a black walnut stump. I'd saw it in its ve ...

Re: Missing a deadline in a big way, how would you handle this?
A message posted at WOODWEB's Business and Management Forum (8/31) -- Most of all, be up front with them. If you let them know your honest timeline a ...

Re: Am I being reasonable????
A message posted at WOODWEB's Business and Management Forum (8/31) -- Your work is not the fault. Your contractor is doing what most contractors do, ...

Re: Aborted X left axis switch low error
A message posted at WOODWEB's CNC Forum (8/31) -- open the Input screen with the machine and software on activate the switch with your finger and see ...

Re: Access to the facility
A message posted at WOODWEB's Business and Management Forum (8/31) -- Tom , did you say the guy did call in sick ? If so why didn't you let the other ...

Re: Thick rustic oak veneer
A message posted at WOODWEB's Veneer Forum (8/31) -- There is a place called thinboards.com ,they might be able to help you.Certainlywood has 1/16&qu ...

Re: Coved splash on solid surface countertops
A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/31) -- been doing coves for 20 yrs .if you have a cnc i can help you email me w ...

Re: Vertical Machining Center
A message posted at WOODWEB's CNC Forum (8/31) -- Biesse has been doing this longer than the other manufacturers. The Eko machine is the machine to l ...

Re: Missing a deadline in a big way, how would you handle this?
A message posted at WOODWEB's Business and Management Forum (8/31) -- Pat, thank you for the excellent points. ...

Re: Making a round table top from Mfc
A message posted at WOODWEB's Furniture Making Forum (8/31) -- Use a down cut spiral bit and you should get smooth edges. ...

Re: Wood identification
A message posted at WOODWEB's Architectural Woodworking Forum (8/31) -- That is definitely longleaf pine. ...

Re: Do both sides of panels have to be veneered at the same time?
A message posted at WOODWEB's Veneer Forum (8/31) -- That's a good question Antonio and I have to admit I don't have a good answer:>/ With TB cold ...

How long to clamp veneer to mdf with fsv glue?
A message posted at WOODWEB's Veneer Forum (8/31) -- Im a bit confused here (doesnt take much to do that :) ) Im new to the veneer game so bare with ...

Re: Finish Cracking on Fire Rated MDF
A message posted at WOODWEB's Veneer Forum (8/31) -- I had this very problem with FRMDF. The Borate reacts with the glue causing it to cure almost im ...

Re: Do both sides of panels have to be veneered at the same time?
A message posted at WOODWEB's Veneer Forum (8/31) -- Thanks jeff, here is the link for the manufacturers instructions. Thing is though i dont see ANY ...

Re: Do both sides of panels have to be veneered at the same time?
A message posted at WOODWEB's Veneer Forum (8/31) -- I've done it both ways and 90% of the people out there wouldn't be able to tell the difference. ...

Re: Do both sides of panels have to be veneered at the same time?
A message posted at WOODWEB's Veneer Forum (8/31) -- thanks jeff! yes thats right you did mention you have the vac press etc,,, i am leaning towards ...

Re: Do both sides of panels have to be veneered at the same time?
A message posted at WOODWEB's Veneer Forum (8/31) -- thanks rich, i totally agree with you. The other reason why i started having second thoughts abo ...

Re: Do both sides of panels have to be veneered at the same time?
A message posted at WOODWEB's Veneer Forum (8/31) -- You may see the line of the paper after edgeband. You can sand the paper down a little to reduce ...

Re: Finish Cracking on Fire Rated MDF
A message posted at WOODWEB's Veneer Forum (8/31) -- The glue most likely pre-cured which in turn did not create the bond required to hold the veneer ...

Re: What quick connects are you using?
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (8/31) -- Milton are the best i have found I bought some of the Dynabrades ...

Re: preparation of heat resistant veneered MDF panel.
A message posted at WOODWEB's Veneer Forum (8/31) -- Thanks Rich for your quick response i will let you know the test result after test thanks once a ...

gluing 3 form
A message posted at WOODWEB's Laminating and Solid Surfacing Forum (8/31) -- any information on gluing 3form mitres is appreciated iam having problem ...

Re: Cabinet design software
A message posted at WOODWEB's CAD Forum (8/31) -- I agree with Denny, autocad is a very complex and if you have never used it before I would steer cl ...

Re: Aluminum corner bead small
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/31) -- Larry, this is exactly what I am looking for. I did have a fantasy th ...

Re: Aluminum corner bead small
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (8/31) -- We've used the CW system. There is a you tube video. Google CW system ...

Re: Table saw blade coming loose
A message posted at WOODWEB's WOODnetWORK Forum (8/31) -- Thank you for the inertia comment. That helped resolve one of my own issues ...

531138.html
A message posted at WOODWEB's Value Added Wood Processing Forum (8/31) -- I have sold many walnut burls for woodturning stock and for gunstock materi ...

Re: adding value to walnut burls
A message posted at WOODWEB's Value Added Wood Processing Forum (8/31) -- I would go for the paper weight market . but that's gust me. ...

Re: adding value to walnut burls
A message posted at WOODWEB's Value Added Wood Processing Forum (8/31) -- just not gust ( product of public schools) ...

Re: Customer Ran Out of $$$
A message posted at WOODWEB's Business and Management Forum (7/31) -- When I've taken a check that I have reason to believe may not clear, I'll do a ...

Re: Air compressor recomendation
A message posted at WOODWEB's Finishing Forum (7/31) -- I think the AAA is a good option but if that is not an option another way to do it is with 2 ...

Re: weinig end snipe
A message posted at WOODWEB's Solid Wood Machining Forum (7/31) -- Bennet Check and see if your pressure shoe is is out of parallel in both direction ...

Holz-her 1251 parts breakdown
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- Hi everyone, I just picked up a HolzHer 1251 slider at an auction for scrap price. It is ...

Re: RE: Sawmill pillow block bearing
A message posted at WOODWEB's Sawing and Drying Forum (7/31) -- You may also have a bearing that is not specked for your application. You may need a ...

Re: Customer Ran Out of $$$
A message posted at WOODWEB's Business and Management Forum (7/31) -- What I have done is to have them date the check for the day it is written and n ...

Re: better / longer lasting planer blades?
A message posted at WOODWEB's Solid Wood Machining Forum (7/31) -- Jake Have you checked to see if carbide tipped planer blades are available for you ...

Jacksonville, FL Suppliers
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- I recently relocated to Jacksonville, Florida and I am not having much luck locating supp ...

Re: Finish Supplier for South Jersey?Philly
A message posted at WOODWEB's Finishing Forum (7/31) -- You should talk with Ed Cocker, at Russell Plywood in New Castle,DE. Ed's a great guy and lac ...

Re: Customer Ran Out of $$$
A message posted at WOODWEB's Business and Management Forum (7/31) -- However having a lien beats nothing, and gets their attention, usually starts a ...

Re: Looking for small bar clamps
A message posted at WOODWEB's Furniture Making Forum (7/31) -- 3/4 inch masking tape, or a small frame big enough to allow for wedges. ...

Re: Water based paints for spraying?
A message posted at WOODWEB's Finishing Forum (7/31) -- Hey Bill, I feel your pain--been down the same road. I'm just an amateur who likes finishing. ...

Water based paints for spraying?
A message posted at WOODWEB's Finishing Forum (7/31) -- Finally getting sick of trying to make do with water based latex or acrylics for some of our ...

Re: Millennials
A message posted at WOODWEB's Business and Management Forum (7/31) -- i do not think that the present young generation is f-d, and I don't think any ...

Re: Spray Only Stain and Wood Filler
A message posted at WOODWEB's Finishing Forum (7/31) -- We do mostly stain colors and very little natural finishes. I don't need a filler to match th ...

Re: Laminate Storage
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- Try Edwards. They are in Cincinnati Just Google laminate racks. We've had ours for 20 yea ...

Re: Stock cabinetry starting at $1000 10x10 kitchen
A message posted at WOODWEB's Business and Management Forum (7/31) -- First of all you are only getting 10.5' of base cabinetry. (20' - 2' (Dishwashe ...

Re: Spray Only Stain and Wood Filler
A message posted at WOODWEB's Finishing Forum (7/31) -- There are wax fill sticks available from Mohawk. They don't require a sanding to remove the e ...

Laminate Storage
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- I run a laminate cabinet shop. Currently to store our laminate sheets for over stock or f ...

Re: Warped walnut top
A message posted at WOODWEB's Architectural Woodworking Forum (7/31) -- I would look at the plumbing and make sure there isn't an moisture build up f ...

Re: Small jobs
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- Many here don't understand the terms "Not my line of work." Yes, I used to do s ...

Re: Small jobs
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- They bought a Miele fridge, so the customer will not flinch at a price. Its often hard to ...

Re: filling with polyester?
A message posted at WOODWEB's Finishing Forum (7/31) -- word of advise when mixing your polyester... after your batched up pour about 4 oz. in a mixi ...

Re: What is the best miter saw setup?
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/31) -- I bought the festool Kapex for the shop , was not impressed with the ...

Photo of Striebig in packing crate anyone?
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- Greetings-I am retiring and liquidating my machinery. I have a Streibig Compact Plus 5164 ...

Re: What is the best miter saw setup?
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/31) -- I don't know about the laser aspect but most 12" saws I've used ...

Re: Delta 20" Bandsaw Tire Replacement...
A message posted at WOODWEB's Solid Wood Machining Forum (7/31) -- Thanks Bob, I called a few places including Carter with no luck. Someone recommend ...

Re: Bonehead conversion varnish mistake
A message posted at WOODWEB's Finishing Forum (7/31) -- if you try to kick the under catalyzed coating in with over catalyzed product your customer w ...

Re: Photo of Striebig in packing crate anyone?
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- KD-There is a lot of merit in your suggestion. I know that I would prefer to see the unit ...

Color calking
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- I build my cabinets out of pre finished plywood, when I do all my cuts and assemble I som ...

Re: Which 36" wide belt???
A message posted at WOODWEB's Solid Wood Machining Forum (7/31) -- I had a 20hp phase converter running a 36" scmi widebelt. It did the job but ...

Re: Kreg joints creeping sideways.
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- We switched to the Castle machines due to that problem, and we also only use the kreg jig ...

Re: Who makes very good, High Quality chisels
A message posted at WOODWEB's Solid Wood Machining Forum (7/31) -- You have to sharpen them. Most chisels come dipped in lacquer or similar. Remove t ...

Re: Color calking
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- Check out Mohawks website for some soft wax sticks. They come in a variety of colors. Eas ...

Re: filling with polyester?
A message posted at WOODWEB's Finishing Forum (7/31) -- If you do this on a grainy wood, be prepared for a lot of shrinkage over time. Sometimes, dep ...

Re: What is the best miter saw setup?
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/31) -- Thanks Joe, cept I hate all things Dewalt, I will say though the newe ...

Re: Photo of Striebig in packing crate anyone?
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- Try Colonial Saw. 909-390-5465 or cswest@csaw.com. Spoke to them at the AWFS show and the ...

Re: Photo of Striebig in packing crate anyone?
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- Why not sell it "where is". Let the buyer test it, pack and ship. Then it is no ...

Re: Laminate Storage
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- Thanks Larry. I have been thinking of going to a few of my distributors and getting ideas ...

Re: Color calking
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- Home Depot sells a caulk in the wood flooring department that is a pretty close match. Wo ...

Is there a euro hing
A message posted at WOODWEB's Cabinetmaking Forum (7/31) -- Is there a euro hinge that allows 2 door to swing on a single 3/4 divider? ...

Re: 844 colorants source
A message posted at WOODWEB's Finishing Forum (7/31) -- Mohawk Finishing Mohawk Color Concentrates ...

Re: Overwhelmed
A message posted at WOODWEB's Business and Management Forum (7/31) -- Pat, I think you are correct in many aspects of you're thinking. I have looked ...

Re: Overwhelmed
A message posted at WOODWEB's Business and Management Forum (7/31) -- Not me, this is what you are saying: "I have been in the custom woodworkin ...

Re: Cabinet vision maintenance and support renewal
A message posted at WOODWEB's CAD Forum (7/31) -- Since we sell software, and support for that software, I can't claim to be unbiased and some may se ...

Overwhelmed
A message posted at WOODWEB's Business and Management Forum (7/31) -- Ok, so I thought after some lengthy time researching how to's and do's and dont ...

Re: finishing massive redwood top on Kauai
A message posted at WOODWEB's Furniture Making Forum (7/31) -- It looks like you have at least 7 problems identified. It already has a finish, and he ...

Re: Curved glazing stops
A message posted at WOODWEB's Architectural Woodworking Forum (7/31) -- You don't state the chord length of the stops, and that affects how I would g ...

Re: fighting for your business
A message posted at WOODWEB's Business and Management Forum (7/31) -- Yup comparative advantage is very common and that is the point, if it weren't t ...

Cajon Manufacturing
A message posted at WOODWEB's Business and Management Forum (7/31) -- Hi, I'm starting a business that's aimed at selling Cajon's, a latin american b ...

Re: fighting for your business
A message posted at WOODWEB's Business and Management Forum (7/31) -- The term "comparative advantage" is simply used to make something ban ...

Re: Are Aggregates Important?
A message posted at WOODWEB's CNC Forum (7/31) -- "Our application is nested based custom residential cabinetry." I'm going to go against t ...

Re: Overwhelmed
A message posted at WOODWEB's Business and Management Forum (7/31) -- Great advice being given so far. I too am in the Dallas area. I have been appro ...

Re: Overwhelmed
A message posted at WOODWEB's Business and Management Forum (7/31) -- Sounds like you are a bit early in your career to take on the work. It's been m ...

Re: Are Aggregates Important?
A message posted at WOODWEB's CNC Forum (7/31) -- All of our machines are all flat table. Ive worked on weeke p&r and biesse 5axis and never want ...

Re: Overwhelmed
A message posted at WOODWEB's Business and Management Forum (7/31) -- I should include that this lead came from a friend of my business partner, a tr ...

Re: Overwhelmed
A message posted at WOODWEB's Business and Management Forum (7/31) -- Ever the cynic, I would say that there is more than one GC that preys on small, ...

Re: Overwhelmed
A message posted at WOODWEB's Business and Management Forum (7/31) -- Chances are good that you will only be bidding on the lobby and more custom are ...

Re: change Scmi moulder from 440v to 220v
A message posted at WOODWEB's Solid Wood Machining Forum (7/31) -- Russ is right on This is the best case scenario as in going from low to high volta ...

Re: Failed glue joint
A message posted at WOODWEB's Furniture Making Forum (7/31) -- It is a shame when miters seperate. I think wood movement perhaps from drying is your ...

Re: Are Aggregates Important?
A message posted at WOODWEB's CNC Forum (7/31) -- With no idea of what kind of production your company does, I'm with Gary B. Now if you do several k ...

Re: Where do you learn about wood railing fabrication etc?
A message posted at WOODWEB's Architectural Woodworking Forum (7/31) -- Alex, Marc Adams school of woodworking has had Gary Striegler teaching stairw ...

Re: Are Aggregates Important?
A message posted at WOODWEB's CNC Forum (7/31) -- I agree with the other guys. I use 3 aggregates extensively. Adjustable angle, dual 90, and moulder ...

Re: finishing massive redwood top on Kauai
A message posted at WOODWEB's Furniture Making Forum (7/31) -- I think moving the slab is the least of your concerns. Becoming a student of mechanica ...

Re: Curved glazing stops
A message posted at WOODWEB's Architectural Woodworking Forum (7/31) -- Give some thought to making a 2 part curved form and laminating 1/8 or 1/4&qu ...

Avonite
A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/31) -- We are about to get started cutting a large Avonite project on our beam ...

Re: Cajon Manufacturing
A message posted at WOODWEB's Business and Management Forum (7/31) -- Hello we are a small 8 to 12 man company that specialize in hotel furniture and ...

Re: scribed 3 sides between 2 walls
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/31) -- There is a link on this site for the Quickscribe scribing system. Wat ...

Re: Curved glazing stops
A message posted at WOODWEB's Architectural Woodworking Forum (7/31) -- The longer chord length is 34" the shorter is about 4". Correction ...

Re: fighting for your business
A message posted at WOODWEB's Business and Management Forum (7/31) -- This is a shorter explanation and extremely well done. ...

Re: Curved glazing stops
A message posted at WOODWEB's Architectural Woodworking Forum (7/31) -- The longer radii are 34" ...

Re: Are Aggregates Important?
A message posted at WOODWEB's CNC Forum (7/31) -- Thanks guys! All this info is very helpful. ...

Re: New CNC
A message posted at WOODWEB's CNC Forum (7/31) -- Tickets are booked - I can hardly wait! ...

Re: Contact cement
A message posted at WOODWEB's Veneer Forum (7/31) -- Thanks Les. That's a good idea on the Phenolic. I didn't know they had that. Then it's just trea ...

3Form
A message posted at WOODWEB's Laminating and Solid Surfacing Forum (7/31) -- Looking for some of 3Form's "Varia Ecoresin" in the Birch styl ...

Drawer glide installation/upgrading
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/31) -- Got a reface job coming up where i've been asked to change a bunch of ...

Can you sand and repaint over veneer??
A message posted at WOODWEB's Veneer Forum (7/31) -- I recently installed several hundred square feet of low tac stickers for a trade show at a Hotel ...

Re: Drawer glide installation/upgrading
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/31) -- If you are talking about retro fitting Euro slide drawer boxes that h ...

Re: Offset door hinges
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/31) -- Bruce, I don't agree with that. He came out, measured the entire clos ...

Re: Offset door hinges
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/31) -- Gee Roman, "The decision to go all the way to the ceiling was a ...

Re: Can you sand and repaint over veneer??
A message posted at WOODWEB's Veneer Forum (7/31) -- Honestly, it doesn't have to make sense to you, you caused the damage. It looks like the paint w ...

Re: Offset door hinges
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/31) -- mastercabman? read the opening statement and then the question. then ...

Re: Offset door hinges
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (7/31) -- "This is a professional site you need to ask your question somew ...

Re: burning saw dust
A message posted at WOODWEB's Value Added Wood Processing Forum (7/31) -- The most common adhesive for charcoal briquets is corn starch. For wood dus ...

Re: burning saw dust
A message posted at WOODWEB's Value Added Wood Processing Forum (7/31) -- the best wood flour comes from aspen, but other species are easily used. ...

575115.html
A message posted at WOODWEB's Value Added Wood Processing Forum (7/31) -- Hi there, Please see the attached product. From my knowledge it is from Rus ...

Re: Wood Cad Cam outline geometry constraint options needing elaboration
A message posted at WOODWEB's CAD Forum (5/31) -- Hi, me again! I been using the tips in this forum with really good results. A couple of further que ...

Maintaining wet bulb temp
A message posted at WOODWEB's Sawing and Drying Forum (5/31) -- I have just recently built a kiln and use the Nyle 53 dryer along with the power vent ...

Re: Wood Cad Cam outline geometry constraint options needing elaboration
A message posted at WOODWEB's CAD Forum (5/31) -- Some times at least I think I'm amusing. Not sure which version you have but your column display of ...

Re: Omnitech Pal
A message posted at WOODWEB's CNC Forum (5/31) -- Dear "AA," Free phone support is immediately available for your Omnitech CNC from Giben A ...

Re: Let's talk Take-off Software
A message posted at WOODWEB's Business and Management Forum (5/31) -- Planswift has excel integration and is by far the best takeoff software I have ...

Re: why is my butternut sapwood really hard & dark
A message posted at WOODWEB's Sawing and Drying Forum (5/31) -- We know that sapwood cells die almost immediately after they are formed. We know that ...

Re: why is my butternut sapwood really hard & dark
A message posted at WOODWEB's Sawing and Drying Forum (5/31) -- We have had a change in weather here in Australia and the other small boards I have c ...

Laminate Project shipping to Costa Rica
A message posted at WOODWEB's Cabinetmaking Forum (5/31) -- I am in the process of bidding a project that will be shipped to Costa Rica when complete ...

Re: Wood Cad Cam outline geometry constraint options needing elaboration
A message posted at WOODWEB's CAD Forum (5/31) -- I'm not certain about question 1 but your example shown takes us back to the "hitch" post ...

Re: Wood Cad Cam outline geometry constraint options needing elaboration
A message posted at WOODWEB's CAD Forum (5/31) -- The "filter on a variable" answers question 3 perfectly. Thanks! As for your amusing comm ...

Re: Help: Do i need Makita 5402 415MM (16-5/16′) – CIRCULAR SAW
A message posted at WOODWEB's Solid Wood Machining Forum (5/31) -- No offence meant, but you can't expect to get a useful answer to such a vague ques ...

Re: Maintaining wet bulb temp
A message posted at WOODWEB's Sawing and Drying Forum (5/31) -- another thing I found out tonight is the DH which has dual fans is putting out twice ...

CNC SCM Pratix 22 Reference
A message posted at WOODWEB's CNC Forum (5/31) -- Hi, I've recently purchased the SCM Pratix 22 and am new to the CNC. I've run into my first problem ...

Dodds SE-1 dovetail machine
A message posted at WOODWEB's Cabinetmaking Forum (5/31) -- Hey all, I just picked up one of these little dovetail machines used. I was wondering if ...

Re: SHER-WOOD SB STAIN under conversion varnish
A message posted at WOODWEB's Finishing Forum (5/31) -- I do it all the time. No problems. As long as you reduce the stain concentrate properly. Some ...

Re: RE: Grizzly Drum Sander-- Rollers
A message posted at WOODWEB's Solid Wood Machining Forum (5/31) -- I use 6" hook and loop paper and can change grits pretty quickly. If your dru ...

Re: Plywood & Plywood Suppliers
A message posted at WOODWEB's Business and Management Forum (5/31) -- Thanks for all the input. Looking to replace Atlantic as a supplier as we seem ...

Re: Plywood & Plywood Suppliers
A message posted at WOODWEB's Business and Management Forum (5/31) -- You are not allowed to say anything negative about any supplier/vendor on here. ...

Re: Reliable shop miter saws?
A message posted at WOODWEB's Cabinetmaking Forum (5/31) -- http://www.vistamachines.com/ ...

Re: why is my butternut sapwood really hard & dark
A message posted at WOODWEB's Sawing and Drying Forum (5/31) -- What? ...

Re: dust collection
A message posted at WOODWEB's CNC Forum (5/31) -- Did you make a decision and if so, what did you do? ...

Re: Dodds SE-1 dovetail machine
A message posted at WOODWEB's Cabinetmaking Forum (5/31) -- Call 1-800-84 DODDS ...

Re: union scale in Chicago
A message posted at WOODWEB's Business and Management Forum (5/31) -- I think the main problem here in IL is that it is not a right to work state. So ...

Re: Improving Information Flow
A message posted at WOODWEB's Business and Management Forum (5/31) -- To add to Tim's point, a whiteboard with the jobs and their stages helps to cre ...

Re: Improving Information Flow
A message posted at WOODWEB's Business and Management Forum (5/31) -- Thanks for the input! I think an ERP solution may be out of budget at this poin ...

Re: union scale in Chicago
A message posted at WOODWEB's Business and Management Forum (5/31) -- I basically feel about unions like I feel about bankers. Both organizations in ...

Re: exterior wood top
A message posted at WOODWEB's Architectural Woodworking Forum (5/31) -- I agree with Gary. Cupping can be excessive. Further, white oak is a high mov ...

Re: Safe Rooms
A message posted at WOODWEB's Business and Management Forum (5/31) -- No, it means that retirees will collect about 7x what they paid into medicare. ...

Re: Walnut cupping after glue up.
A message posted at WOODWEB's Adhesives Forum (5/31) -- Alternating the growth rings simply gives you a sine wave table top when it moves. I have see ...

Re: Does optimization=boring shop job?
A message posted at WOODWEB's Business and Management Forum (5/31) -- I have many visions of the perfect optimization of my shop. surgical clean, rob ...

Re: Safe Rooms
A message posted at WOODWEB's Business and Management Forum (5/31) -- I've been going down the rabbit hole on this one... Looks like a lot needs to g ...

Re: Safe Rooms
A message posted at WOODWEB's Business and Management Forum (5/31) -- External debt does not have anything to do with what I'm talking about. And it ...

Re: Wood Putty or Not?? Making Stairtreads??
A message posted at WOODWEB's Architectural Woodworking Forum (5/31) -- Gene, The reason why the wood dust trick doesn't really work well has nothing ...

Re: Shop rate increase
A message posted at WOODWEB's Business and Management Forum (5/31) -- Does your gas station let you know when they raise their prices? How about the ...

Gun Washers
A message posted at WOODWEB's Finishing Forum (5/31) -- I'm starting to see spray gun washer machines more and more these days and not sure if they a ...

Re: exterior stair treads
A message posted at WOODWEB's Architectural Woodworking Forum (5/31) -- If you must use natural wood, then ipe is the only good choice. Holes need to ...

Re: Gun Washers
A message posted at WOODWEB's Finishing Forum (5/31) -- theire are about three major gun washer mfg, becca uniram and hercuiles i have one or another ...

Re: Wood Putty or Not?? Making Stairtreads??
A message posted at WOODWEB's Architectural Woodworking Forum (5/31) -- To minimize the contrast consider making some putty using epoxy and maple saw ...

Re: contact cement spraying problem
A message posted at WOODWEB's Adhesives Forum (5/31) -- Update….Just ran into a small hiccup on a job and needed to apply some PVC banding to a coupl ...

Re: how much spring in a spring joint
A message posted at WOODWEB's Architectural Woodworking Forum (5/31) -- Feed tables are seldom perfect flat with the in and out feed aligned with eac ...

Re: Safe Rooms
A message posted at WOODWEB's Business and Management Forum (5/31) -- The more I look at money the less I understand it. So I always heard that print ...

Re: Gluing a mirror to a plywood door
A message posted at WOODWEB's Architectural Woodworking Forum (5/31) -- There are many situations where the plywood will warp. I have seen mirrors cr ...

Door Gapping for euro box construction
A message posted at WOODWEB's Cabinetmaking Forum (5/31) -- I have a question for those of you who build euro style cabinets. If you are using 19 mm ...

Re: Safe Rooms
A message posted at WOODWEB's Business and Management Forum (5/31) -- "The very real threat is the entitlements coming home to roost. There very ...

Re: Safe Rooms
A message posted at WOODWEB's Business and Management Forum (5/31) -- Can't prevent it. What they have now (in the US) is FDIC to cover any bank defa ...

Re: union scale in Chicago
A message posted at WOODWEB's Business and Management Forum (5/31) -- Pintree- I recently asked the plant manager of a large shop who beleives in pla ...

Re: Drilling holes to get casters on straight in a chair
A message posted at WOODWEB's Furniture Making Forum (5/31) -- It seems like you could make a platform larger than the area of the four chair legs. S ...

Re: Safe Rooms
A message posted at WOODWEB's Business and Management Forum (5/31) -- The very real threat is the entitlements coming home to roost. There very likel ...

Re: Build or buy?
A message posted at WOODWEB's Cabinetmaking Forum (5/31) -- Comac has adopted the 9x9(929,939,...) design numbering system. It took a ton of creativi ...

Drilling holes to get casters on straight in a chair
A message posted at WOODWEB's Furniture Making Forum (5/31) -- Who has a process or a jig to get holes for casters drilled straight in chairs? There' ...

Re: Improving Information Flow
A message posted at WOODWEB's Business and Management Forum (5/31) -- HH, Re-read Joe's post. You will be far better off with an analog method using ...

Re: Turning Accoya
A message posted at WOODWEB's Architectural Woodworking Forum (5/31) -- I agree that the treated wood becomes quite brittle and so will not turn well ...

Re: Safe Rooms
A message posted at WOODWEB's Business and Management Forum (5/31) -- I'm having trouble wrapping my head around external debt... So from what I gath ...

Re: Does anyone out there have an Andi Stratos O-MC CNC Router w/ tool chan
A message posted at WOODWEB's CNC Forum (5/31) -- Ok, I don't have an Anderson router, but they were my second choice when I bought mine. Why wouldn' ...

Re: Marquetry knife---anyone do this craft?
A message posted at WOODWEB's Cabinetmaking Forum (5/31) -- I'm not much into marquetry artwork but I do enjoy geometric inlays, line work, chess boa ...

Re: Safe Rooms
A message posted at WOODWEB's Business and Management Forum (5/31) -- Another question... In fractional reserve banking, if the bank counts the reser ...

Re: Vanity with Vessel sink
A message posted at WOODWEB's Cabinetmaking Forum (5/31) -- Thanks Gary & James. That was kinda what I was figuring. Most of the vanities I build ...

Re: New spray system
A message posted at WOODWEB's Finishing Forum (5/31) -- Thanks for the replys. I dont have a good sized compresser. I think i may get one tho. Any ad ...

Re: Shop rate increase
A message posted at WOODWEB's Business and Management Forum (5/31) -- Only tell them if you want to loose business. Some use a price increase as a ma ...

Shop rate increase
A message posted at WOODWEB's Business and Management Forum (5/31) -- Just wondering, I had another thread going and it lead me to another question. ...

Re: Walnut cupping after glue up.
A message posted at WOODWEB's Furniture Making Forum (5/31) -- All wood movement over time is the result of moisture movement or moisture change. So, ...

Re: Does optimization=boring shop job?
A message posted at WOODWEB's Business and Management Forum (5/31) -- Happy to report that I have recently toured a shop that incorporates optimizati ...

Re: Vanity with Vessel sink
A message posted at WOODWEB's Cabinetmaking Forum (5/31) -- A standard vanity top is 32" to 34" The sink is usually flush with the top. I w ...

Re: Safe Rooms
A message posted at WOODWEB's Business and Management Forum (5/31) -- Dynamics of external debt may not be a problem, but I'm still curious about it. ...

Re: Production Finishing of Shaker Boxes
A message posted at WOODWEB's Finishing Forum (5/31) -- Thanks guys, it looks like the simple solution will work - sanding after raising the grain pr ...

Re: Safe Rooms
A message posted at WOODWEB's Business and Management Forum (5/31) -- It's actually a legal requirement in Switzerland. Very old houses may get granf ...

Re: The T and M curse.
A message posted at WOODWEB's Business and Management Forum (5/31) -- That's kind of what I was thinking, I just was wondering what others thought. I ...

Re: Gluing a mirror to a plywood door
A message posted at WOODWEB's Architectural Woodworking Forum (5/31) -- A small medicine cabinet may be ok but a large door with mirror glued to one ...

Re: Toe kick base
A message posted at WOODWEB's Cabinetmaking Forum (5/31) -- Try hardware concepts in Florida. Excellent product with fair price. Leg levelers are the ...

Re: S2M Center within Alphacam
A message posted at WOODWEB's CAD Forum (5/31) -- I make some how to work on my desktop . But if i try on my laptop i have message That is error numb ...

Curved Closet Rod to my specs
A message posted at WOODWEB's Cabinetmaking Forum (5/31) -- Does anyone know where I can get a curved (Concave) closet pole made to my radius needs? ...

Re: Door Gapping for euro box construction
A message posted at WOODWEB's Cabinetmaking Forum (5/31) -- 1.5 mm reveal on case edge. 3 mm reveal between pair of doors and drawer fronts and doors ...

Re: S2M Center within Alphacam
A message posted at WOODWEB's CAD Forum (5/31) -- Not sure if that is possible, but it is very easy to create tools inside of Alphacam, including cus ...

Re: Marquetry knife---anyone do this craft?
A message posted at WOODWEB's Cabinetmaking Forum (5/31) -- Yup, I meant scroll saw. The traditional marquetry saw is called a chevalet. ...

Re: Improving Information Flow
A message posted at WOODWEB's Business and Management Forum (5/31) -- The website is www.rogershaw.com . ...

Re: exterior wood top
A message posted at WOODWEB's Architectural Woodworking Forum (5/31) -- White oak yellows when exposed to UV. ...

Re: Improving Information Flow
A message posted at WOODWEB's Business and Management Forum (5/31) -- Thanks ...

Re: subscribing to public bid lists
A message posted at WOODWEB's Business and Management Forum (5/31) -- You probally aren't qualified for a lot of public works projects ( many require ...

Re: Entry level CNC
A message posted at WOODWEB's CNC Forum (5/31) -- I agree with all that has been stated. I learned more about cnc's routers by going to visit other s ...

Re: Working with Metal Laminates
A message posted at WOODWEB's Laminating and Solid Surfacing Forum (5/31) -- Excellent, Brian! I'm doing to two panels for a pair of Thermador column ...

Re: Festool TS 75 Saw vs New Table Saw
A message posted at WOODWEB's Furniture Making Forum (5/31) -- Ken, It may seem like a good idea, I have a ts55 and I love it, I would not give it up ...

Re: Entry level CNC
A message posted at WOODWEB's CNC Forum (5/31) -- I use cabinet vision to feed our machine. All in all it cost me 98k installed. It was used. I have ...

Re: Crown on ceiling and cabinets
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/31) -- When we have a job like this, we supply all of the crown in the prime ...

subscribing to public bid lists
A message posted at WOODWEB's Business and Management Forum (5/31) -- We are a small shop which does residential and light commercial work. A firm wh ...

Festool TS 75 Saw vs New Table Saw
A message posted at WOODWEB's Furniture Making Forum (5/31) -- I keep hearing really good things about the Festool saw in that it can replace the tab ...

Re: Festool TS 75 Saw vs New Table Saw
A message posted at WOODWEB's Furniture Making Forum (5/31) -- Yes, the table saw has always been a versatile tool in the shop, I agree there. Just g ...

lodgepole pine
A message posted at WOODWEB's Sawing and Drying Forum (5/31) -- If a 11' by 5" in diameter lodgepole pine weights approximately 64lbs, how do u ...

Re: Office cubicles
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/31) -- Install the cleat in the cubicle. For speed, it's much better. 2000 t ...

Re: subscribing to public bid lists
A message posted at WOODWEB's Business and Management Forum (5/31) -- Follow Alan's advice. It is the best I have heard in a long time. ...

Re: lodgepole pine
A message posted at WOODWEB's Sawing and Drying Forum (5/31) -- Try the link below. ...

Re: Spalted sycamore
A message posted at WOODWEB's Furniture Making Forum (5/31) -- Thank you so much for your input. I should explain a little further. The spalted timbe ...

Re: Spalted sycamore
A message posted at WOODWEB's Furniture Making Forum (5/31) -- "Can it be treated in some way to prevent the spalting process." Are you sug ...

cracking in Santos veneer before and after polishing
A message posted at WOODWEB's Veneer Forum (5/31) -- Guys hope every thing is all rite, but this is not happening in case of me because of the proble ...

Re: Spalted sycamore
A message posted at WOODWEB's Furniture Making Forum (5/31) -- You can use a two part bleach, which will make all the wood whiter, but not the black ...

Re: cracking in Santos veneer before and after polishing
A message posted at WOODWEB's Veneer Forum (5/31) -- Looks like a problem from the veneer mill to me. Do you have more raw stock? Look at both sides, ...

Re: cracking in Santos veneer before and after polishing
A message posted at WOODWEB's Veneer Forum (5/31) -- Rich thanks for quick respond, you may be right but this happens in 2 more veneer (white ash,fig ...

Re: Spalted sycamore
A message posted at WOODWEB's Furniture Making Forum (5/31) -- The color change may be from oxidation much like cherry wood or even Purple heart . Co ...

Re: cracking in Santos veneer before and after polishing
A message posted at WOODWEB's Veneer Forum (5/31) -- Here is the image: ...

planning for crown molding and trim
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/31) -- I just completed my first large crown molding job. (thanks to Gary Ka ...

Re: planning for crown molding and trim
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/31) -- I usually add on 15-20% for painted trim, 20-30% for stain grade. But ...

Re: planning for crown molding and trim
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (5/31) -- MJ, For me, I would say 5-10 minuntes to cope with the coping foot on ...

Re: Late payers affecting cashflow
A message posted at WOODWEB's Business and Management Forum (3/31) -- Are you selling financing or quality, turnaround, and service? Let's answer the ...

Re: pricing of finishing paneledwalls
A message posted at WOODWEB's Finishing Forum (3/31) -- Be very careful on pricing by the square foot.... There are many variables to consider when p ...

water based finish comparisons
A message posted at WOODWEB's Finishing Forum (3/31) -- Am wondering if anyone out there has come across any objective product testing of water based ...

Re: Late payers affecting cashflow
A message posted at WOODWEB's Business and Management Forum (3/31) -- Thankyou. Much great advice. Maybe it's different in different locations but I ...

Re: Thick Veneer Bar Top
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- Those are painful to look at. Good work, gone bad. Do you know the initial mo ...

Re: Late payers affecting cashflow
A message posted at WOODWEB's Business and Management Forum (3/31) -- I disagree that you won't do business with builders without extending credit. Y ...

Re: Thick Veneer Bar Top
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- That's by far the worst split, but there are about 6 other noticeable ones. P ...

Re: Pull out spacers.
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- Jason, i got the door stops from Hafele, you can get for double doors, singles and also f ...

Re: Paint or Stain on Wood Products
A message posted at WOODWEB's Finishing Forum (3/31) -- What do you mean by "Make Paint".? Are you opposed to using all the stuff that is a ...

Solid Acrylic Cabinet Doors
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- I am considering using solid acrylic cabinet doors for a new residential construction pro ...

Re: Are PT chemicals toxic to living trees?
A message posted at WOODWEB's Forestry Forum (3/31) -- I emailed a pressure treatment company who offers cca treated products and asked my question. ...

Re: Late payers affecting cashflow
A message posted at WOODWEB's Business and Management Forum (3/31) -- I'm with Jim. 50%down, 40% on delivery, 10% when complete. You can vary this la ...

Looking for CNC advice
A message posted at WOODWEB's CNC Forum (3/31) -- I build mostly custom frame cabinets (average a kitchen a week) and am looking to upgrade to a cnc ...

Re: water based finish comparisons
A message posted at WOODWEB's Finishing Forum (3/31) -- i did the wood tables for a local coffee shop... talk about extreme use. i used GF enduro cle ...

Sawstop underpowered
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- We just put in a slightly used 5hp 3ph sawstop (professional). It's hard wire ...

Re: Need some opinions
A message posted at WOODWEB's Business and Management Forum (3/31) -- You're having a hard time finding a job in this industry, because there is no m ...

Re: dye stain vs spray-only stains
A message posted at WOODWEB's Finishing Forum (3/31) -- Pat.......you missed the last 2 words in that sentence . of course I always do samples....gee ...

Re: Late payers affecting cashflow
A message posted at WOODWEB's Business and Management Forum (3/31) -- We solved that problem two ways. 1. Clients that get a "B" or lower r ...

Re: Paying for Purchases from Machinery Exchange
A message posted at WOODWEB's Business and Management Forum (3/31) -- We have done wire transfers through the bank a few times, or Paypal seems a sec ...

Re: What is the best way to join wood for hollow posts?
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- Thank you for the responses. I plan on using a rabbet-dado joint, and a lot o ...

Re: Late payers affecting cashflow
A message posted at WOODWEB's Business and Management Forum (3/31) -- You are not going to do business with builders without giving credit. Always fi ...

Re: What is the best way to join wood for hollow posts?
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- Hello Harold We make a significant amount of columns, from solid wood to pvc ...

Re: Sawstop underpowered
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- The Sawstop has two belts. On my saw the top belt stretched and the blade wou ...

Re: Late payers affecting cashflow
A message posted at WOODWEB's Business and Management Forum (3/31) -- I think your "punishment" section is too complicated and will be igno ...

What glue to use?
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- We have to glue a round rubber into a 3/16" groove on a conference table. What type ...

Re: What are some things I can make to get my name out there?
A message posted at WOODWEB's Business and Management Forum (3/31) -- Stand on a street corner with a sign. Twirling is optional... P.S. you may make ...

Re: Is there anything wrong with this cabinet
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- Nothing out of the ordinary. A C- is what I would grade this cabinetry. Unfortunately, th ...

Re: DOOR FINISH
A message posted at WOODWEB's Finishing Forum (3/31) -- This finish appears to be a rub thru finish...The application of hard wax on the edges will h ...

Re: What is the best way to join wood for hollow posts?
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- Some movement seems like a big understatement to me. Why no finish? I sure ho ...

Re: Solid Acrylic Cabinet Doors
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- Do those lighter weight product have scratch resistant coating? I'd think those doors wou ...

Re: dye stain vs spray-only stains
A message posted at WOODWEB's Finishing Forum (3/31) -- I would say Thorn has made the best suggestion(s). Not to derail, but.......it's funny how (o ...

Re: Sawstop underpowered
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- I'd say it's the phase convertor. Check each phase to make sure they are in b ...

Re: Sawstop underpowered
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- I'd say it's the phase convertor. Check each phase to make sure they are in b ...

Re: dye stain vs spray-only stains
A message posted at WOODWEB's Finishing Forum (3/31) -- Using stains that have white in them will help you blend the grain and flake together. It wil ...

Re: Late payers affecting cashflow
A message posted at WOODWEB's Business and Management Forum (3/31) -- What tomB sais. State on your proposals that late payments after 30 days incur ...

Re: Attendorf TKR 90
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- I'm not sure but I believe the 90 series are fixed at 90 degrees to the table, no blade t ...

Re: finish room lighting
A message posted at WOODWEB's Finishing Forum (3/31) -- i use a 3m sun gun 4700k light. cheap and mobile http://3mcollision.com/3m-pps-sun-gun-ii-lig ...

Re: Close the doors, move on?
A message posted at WOODWEB's Business and Management Forum (3/31) -- Give up because the money sucks! Realize that you can make more money as a hand ...

Re: garage shop guy... am I hated?
A message posted at WOODWEB's Business and Management Forum (3/31) -- I hate you garage shop guy!!! Just kidding, have at this crappy business!!!! ...

Re: Solid Acrylic Cabinet Doors
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- I know they aren't solid acrylic, but maybe take a look at Northern Contours. ...

Re: Thick Veneer Bar Top
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- Is that the only place it cracked? ...

Re: Parts for SAC TS-120 Shaper?
A message posted at WOODWEB's Solid Wood Machining Forum (3/31) -- see link ...

Re: What glue to use?
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- How about E6000? ...

Re: Drafter drew it wrong, customer and consultant approved it wrong...who
A message posted at WOODWEB's Business and Management Forum (3/31) -- We just had new windows put in our house. Three of them were wrong. #1 was my f ...

Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
A message posted at WOODWEB's Business and Management Forum (3/31) -- I will give you that there is bias, how can there not be as an author writes fr ...

Re: edgebander issues
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- All of your comments refer to materials and the machine. After operating four different e ...

Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
A message posted at WOODWEB's Business and Management Forum (3/31) -- I cling to that, but think it gets sometimes even messier than that. It comes d ...

Re: Safety question about upright very acute angled cut on a 5/8 panel
A message posted at WOODWEB's Solid Wood Machining Forum (3/31) -- My mentor taught me to come up with 3 valid solutions to any problem I encountered ...

Re: Split headboard
A message posted at WOODWEB's Furniture Making Forum (3/31) -- Thanks to those who provided the constructive critique and good advice, its really app ...

Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
A message posted at WOODWEB's Business and Management Forum (3/31) -- I am familiar with that one, and I sure do beleive it. It's good to live where ...

Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
A message posted at WOODWEB's Business and Management Forum (3/31) -- Pat, Can you name for us a single source of information about economics that is ...

Re: Domino df 700
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- We make a lot of doors, but use integral tenons and are equipped to do everyt ...

Re: edgebander issues
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- Kyle, If properly calibrated and maintained this machine should run .5mm edgebanding off ...

Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
A message posted at WOODWEB's Business and Management Forum (3/31) -- Pat, You say "by using elementary logic and basic economics it is very eas ...

Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
A message posted at WOODWEB's Business and Management Forum (3/31) -- Larry, Not much has changed since the days of Samuel Clemens except that the si ...

Re: Edge quality off of edgebander
A message posted at WOODWEB's Business and Management Forum (3/31) -- PVC banding does vary in thickness, sometimes even with in a roll. So tweaking ...

Magnets for inset doors
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/31) -- Hello All, Looking for suggestions/help. I installed a large high end ...

Re: Surfprep sander! We're talking airsanding moulding here, folks.
A message posted at WOODWEB's Solid Wood Machining Forum (3/31) -- We are sanding small moulding, as small as 1/2" x 3/4". I just can't see ...

PLAM frame glass door methods
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- I am in the shop drawing phase of a project that has about 80 doors the are PLAM frame wi ...

Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
A message posted at WOODWEB's Business and Management Forum (3/31) -- To NY Times Reader: Back, a very long time ago while I was in college, I drew m ...

moisture meters
A message posted at WOODWEB's Finishing Forum (3/31) -- how many of you guys check incoming wood product with a meter ? Im thinking about buying one ...

Re: PLAM frame glass door methods
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- just a thought...we make mitered doors on a bacci miter door machine with a dowel/spline ...

Re: Need help with built up top/bottom for veneered cabinet
A message posted at WOODWEB's Furniture Making Forum (3/31) -- Bill, besides the weight, I would worry about a veneer that thick pulling the face off ...

Re: Bragging about Vendors
A message posted at WOODWEB's Business and Management Forum (3/31) -- Here in North Cal we use Charles McMurray for hardware and Moore-Newton for har ...

Re: Kitchen Cabinet Building Schedule
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- I admit I'm biased here, but I have a lot of clients in the same business as you are. The ...

Re: Shaper bits
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/31) -- A good start is to do a search on this site - upper right hand corner ...

Re: physics, table saws, and flying lumber
A message posted at WOODWEB's Solid Wood Machining Forum (3/31) -- Here's what you can expect if you do as I did and allow your attention to wane for ...

Re: laminate glue
A message posted at WOODWEB's Adhesives Forum (3/31) -- Water Based contacts are the best bond, most economical to use, especially for flat non-postf ...

Edgetape in a cold environment
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- Hi All. Cabinets made from prefinished maple particle core material edgebanded with prefi ...

Re: Plagued by lacquer orange peel
A message posted at WOODWEB's Finishing Forum (3/31) -- The question reveals the answer. You said you get good results at 70+. Which corresponds with ...

Re: Drafter drew it wrong, customer and consultant approved it wrong...who
A message posted at WOODWEB's Business and Management Forum (3/31) -- when i order a special profile tooling, i have to approve the drawing.if i appr ...

Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
A message posted at WOODWEB's Business and Management Forum (3/31) -- There is a market forecaster called the Elliot Wave that some respectable peopl ...

TwinCAM
A message posted at WOODWEB's CNC Forum (3/31) -- I work with a CNC-machine that uses TwinCAM software. I tried to make a macro for a concealed hinge ...

Polishing rubbing machines needed
A message posted at WOODWEB's Finishing Forum (3/31) -- Does anyone know where I can buy good quality double pad polishing/ rubbing machines as it lo ...

Re: Tooling inserts
A message posted at WOODWEB's Solid Wood Machining Forum (3/31) -- I don't KNOW if they can do it, but I would contact Misenheimer Saw and Tool. They ...

Re: Safety question about upright very acute angled cut on a 5/8 panel
A message posted at WOODWEB's Solid Wood Machining Forum (3/31) -- If the shaper turns out to be nontilt I would use an adjustable angle cutter in th ...

Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
A message posted at WOODWEB's Business and Management Forum (3/31) -- Doesn't the same guy who owns Fox News also own the Wall Street Journal? Do you ...

Re: Paint buildup on spray nozzle.
A message posted at WOODWEB's Finishing Forum (3/31) -- If material is collecting on your cap I would suspect your material is possibly too thick for ...

Re: Polishing rubbing machines needed
A message posted at WOODWEB's Finishing Forum (3/31) -- You should still be able to find the National Detroit 300/A for around $750. Stuhr and Chicag ...

Re: Need help with built up top/bottom for veneered cabinet
A message posted at WOODWEB's Furniture Making Forum (3/31) -- torsion box would work fine, I usually start with 3/32" thick sawn veneer and the ...

CabinetVision Solid XTernal Link
A message posted at WOODWEB's CAD Forum (3/31) -- Can anyone tell me if they are using Xternal Link (Transmit to Factory) in CabinetVision Solid. If ...

Re: Messy, messy topic. Gender. Roll up your sleeves, let's do this.
A message posted at WOODWEB's Business and Management Forum (3/31) -- Yes, I'm sure you are right. ...

Re: Shaper bits
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/31) -- Freeborn Tool Co for Shaper Cutters. US made in Spokane WA. ...

Re: Edgetape in a cold environment
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- How was this edgebanding applied? ...

Re: Edgetape in a cold environment
A message posted at WOODWEB's Cabinetmaking Forum (3/31) -- Applied with an edegbander. ...

Thickness standard for 5/4?
A message posted at WOODWEB's Sawing and Drying Forum (3/31) -- I'd like some insight on a situation. I've got some walnut cut to 5/4. The customer m ...

Options for supporting an installed 22" semi-circular granite overhang?
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/31) -- The kitchen island has a 10"x49"x3cm unsupported overhang t ...

Re: wide belt sander problem
A message posted at WOODWEB's Furniture Making Forum (3/31) -- Hi Adam, thank you for your advice. I did what you said to do and ran about one hundre ...

Re: Video demonstration on how I load logs onto the mill
A message posted at WOODWEB's Sawing and Drying Forum (3/31) -- Rod, why not just roll the logs down the hill onto the mill? Seriously, with your loc ...

Can Smartlister work with microvellum shops?
A message posted at WOODWEB's CAD Forum (3/31) -- Most fabricator still want their subcontract draftsmen to just produce shop drawings. But more and ...

Re: Video demonstration on how I load logs onto the mill
A message posted at WOODWEB's Sawing and Drying Forum (3/31) -- Dave,I thought about using your idea on the toe boards,but I ended up using what I ha ...

Widebelt: sand with drum only?
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- I have a 37" SCMI single head widebelt and was wondering if different sh ...

Re: Exterior Bay Window
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- We make replacement sash and windows with yellow cedar which has quite a few ...

Re: Follow up pics of new shop
A message posted at WOODWEB's Business and Management Forum (3/31) -- Looks good, like you have some breathing room in that building now. I'm jealous ...

Negative ion machine
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (3/31) -- Just wondering if there is such a machine that would make the ult ...

Re: barberan profile wrappers
A message posted at WOODWEB's Laminating and Solid Surfacing Forum (3/31) -- Can you please explain what you mean by "service"? I am a tech ...

Re: Thickness standard for 5/4?
A message posted at WOODWEB's Sawing and Drying Forum (3/31) -- Dave, I see what you are saying,you sawed 1.25 board feet,and he is calling it 1 boar ...

Re: Widebelt: sand with drum only?
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- gary - i'd recommend getting a second opinion with your platen felt and graph ...

Re: 3D CAD for Cabinet Design and Production
A message posted at WOODWEB's CAD Forum (3/31) -- I realize that I came to this thread a little late. I actually have a buddy who does solidworks des ...

Re: Widebelt: sand with drum only?
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- Gary, I think this article I wrote will help tremendously. It also goes over ...

Re: AWI Standards
A message posted at WOODWEB's Business and Management Forum (3/31) -- http://www.amazon.com/Architectural-Woodwork-Standards/dp/0615289886/ref sr_1_1 ...

Re: Will a Double miter saw do a haunch in one cut.
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- I dont see why not I believe this style saw can be used to do toe notches on ...

Re: AWI Standards
A message posted at WOODWEB's Business and Management Forum (3/31) -- Although I confess I have no idea, I would call AWI and ask them. Perhaps there ...

Re: Thickness standard for 5/4?
A message posted at WOODWEB's Sawing and Drying Forum (3/31) -- He's wrong, when you go to a lumber store to get a 1'' board,it isn't 1'',it's 3/4''. ...

Re: Safety
A message posted at WOODWEB's Business and Management Forum (3/31) -- A warning to "what you are about to see is graphic" might be in line. ...

Re: Widebelt: sand with drum only?
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- Great suggestion; I wanted to keep all parts original but will look for alter ...

Re: Will a Double miter saw do a haunch in one cut.
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- A double miter saw will do a double miter. The flat part will still be left t ...

Re: AWI Standards
A message posted at WOODWEB's Business and Management Forum (3/31) -- Purchase the manual and read it cover to cover till you "own it". Goo ...

Re: Ripping hardwood
A message posted at WOODWEB's Solid Wood Machining Forum (3/31) -- Check out Fine Working, it will answer your questions. This site is for the trade ...

Re: Will a Double miter saw do a haunch in one cut.
A message posted at WOODWEB's Architectural Woodworking Forum (3/31) -- Here is what I am trying to accomplish ...

Re: wide belt sander problem
A message posted at WOODWEB's Furniture Making Forum (3/31) -- Glad to help. Good little machines when they behave. ...

Re: DUAL HEAD SANDERS
A message posted at WOODWEB's Business and Management Forum (3/31) -- I think they named the company well. ...

Re: Need a sublet 3d cad contractor
A message posted at WOODWEB's CAD Forum (3/31) -- The company I use is Custom Cad ...

Re: Water in Air Compressor lines
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (3/31) -- Water is hard on your air tools and a disaster when finishing. I ...

Re: home made glue lam
A message posted at WOODWEB's Adhesives Forum (3/31) -- The GlueLam beams work because they effectively negate each of the defects in the wood. You c ...

Re: Best relative humidity for a veneer operation?
A message posted at WOODWEB's Veneer Forum (3/31) -- While my experience with veneer is null, I have paid close attention to what Gene Wengert has wr ...

Re: Testing moisture resistance in particleboard
A message posted at WOODWEB's WOODnetWORK Forum (3/31) -- I have never seen Particle board that is truly moisture resistant. MR particleboard can sta ...

Re: home made glue lam
A message posted at WOODWEB's Adhesives Forum (3/31) -- The advantage of a commercial glu-lam beam is that the gluing process is well controlled, giv ...

Re: Azek for cabinets
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (3/31) -- The AZEK will bow at 7ft lenght and I recommend using a fixed shelf s ...

Re: Dust Collection Recycling
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (3/31) -- Hey Aaron Westbrook, read that Sawdust article, it was nice and c ...

Re: Edge jointing: Festool Domino vs. biscuit jointer
A message posted at WOODWEB's WOODnetWORK Forum (3/31) -- Thank you, Mike and David, for your input. You have given me good advice and encouragement. ...

Re: learning to draft- custom millwork
A message posted at WOODWEB's CAD Forum (3/31) -- Thanks to all that took the time to respond to my post.... I guess I need to reconsider the viabili ...

Re: solid surface join problem
A message posted at WOODWEB's Adhesives Forum (3/31) -- joints likely dirty, surfaces should be cleaned first with denatured alcohol (rubbing alcohol ...

Re: Architects SMH
A message posted at WOODWEB's WOODnetWORK Forum (3/31) -- Your question is not clear to me. ...

Re: ? Has anyone had any luck spraying pva out of an airless sprayer
A message posted at WOODWEB's Adhesives Forum (3/31) -- May I suggest using liners insider your pressure pots and using a Binks 2001 gun with a VT no ...

Re: Plywood construction
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- Hi up north. I don't miss winter at all. Mon Payie ces't le soliel😎, to quote ...

horizontal plank doors
A message posted at WOODWEB's Architectural Woodworking Forum (1/31) -- I am looking to build interior 5 doors. They would like them to have horizont ...

Re: Need Help with 2014 SCM Pratix S15 Handheld Controller
A message posted at WOODWEB's CNC Forum (1/31) -- Hi Brent, I just saw your message now, for which I thank you very much. I will indeed take you up o ...

Just for fun question?
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- Hey all, I was putting around in the shop this week end and looking for a tool that I hav ...

Re: Water Based Finishes
A message posted at WOODWEB's Finishing Forum (1/31) -- I've been using Target 8000 & 9000 when jobs are spec-ed for a WB finish and I've have st ...

Water Based Finishes
A message posted at WOODWEB's Finishing Forum (1/31) -- Hello- I opened my cabinet shop five years ago and have been using General Finishes Enduro Cl ...

Re: Plywood construction
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- Hi Harold, Thanks for responding! I guess you don't miss winters much? I agree that the b ...

Re: Lean Installations
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/31) -- LEAN on the install side of things mainly applies to planning. I went ...

Holzher edgebander setup
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- I just purchased a 2003 holzher sprint 1321 edgebander with premill and corner rounding. ...

Re: Just for fun question?
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- Interesting question Scott, and this is a scenario many of us have faced. But come on, yo ...

Re: Need help finding hinges like these
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- Thx leo. That might be it. Doesnt say anything about it being a half overlay or having a ...

Re: Finishing Sequence - Chalk Paint Kitchen Cabinets
A message posted at WOODWEB's Finishing Forum (1/31) -- Looks like failure on several avenues. Chalk paint in a kitchen environment, even with a clea ...

Re: imitation band saw finish
A message posted at WOODWEB's Solid Wood Machining Forum (1/31) -- Hi Fred That's a standard re sawn pine plank. Most lumber companies or flooring ma ...

Re: Finishing Sequence - Chalk Paint Kitchen Cabinets
A message posted at WOODWEB's Finishing Forum (1/31) -- Kindly note, Milk paint is not an equivalent coating to CHALK paint. Two different beasts.... ...

Re: Need help finding hinges like these
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- I appreciate it Leo. Anyone else have any ideas? The dentist said he's had dentist profes ...

60" x 96" table top
A message posted at WOODWEB's Furniture Making Forum (1/31) -- Looking for advice on the following 60" x 96" x 1 1/2" thick walnut tab ...

Re: Sketchup to Xilog Maestro
A message posted at WOODWEB's CNC Forum (1/31) -- Hi Yaacov, SCM finally answered my question above about dropping off the tool when engaging the rak ...

Re: Lean Installations
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/31) -- Thanks for the responses. Mark that is a great idea. Robert, how many ...

Re: Finishing Sequence - Chalk Paint Kitchen Cabinets
A message posted at WOODWEB's Finishing Forum (1/31) -- I have done two coats of milk paint with a conversion varnish top coat with no problems, howe ...

Re: Need help finding hinges like these
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- Hafele has inset and full (14mm) overlay hinges that look like that (and Leo's)... hope t ...

Re: Xilog plus 5 axis g code examples
A message posted at WOODWEB's CNC Forum (1/31) -- Hello, I will send you example of code. 3+2 axis? I have Alphacam for this i will generate some exa ...

Re: Need help finding hinges like these
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- Just a wild guess and a short search. They looked close. No idea if they're the same. It' ...

Need help finding hinges like these
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- I need help finding hinges for an application like this in a half overlay fashion ...

Re: Trim install clip
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (1/31) -- I really like that Chris! Thank you for sharing! ...

Re: Need help finding hinges like these
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- 2nd one down? ...

Re: starting small funiture shop
A message posted at WOODWEB's Furniture Making Forum (1/31) -- Hey Hugh, Just thought I'd post a quick suggestion from my perspective. Maybe you migh ...

Re: Drafter, hire for experience or potential?
A message posted at WOODWEB's Business and Management Forum (1/31) -- Ptilbs, Your post brings an interesting question. Your comment about working &q ...

Drafter, hire for experience or potential?
A message posted at WOODWEB's Business and Management Forum (1/31) -- We have been a 3 man op for about 10 years. We recently moved towards automatio ...

Open stair stringers on CNC
A message posted at WOODWEB's CNC Forum (1/31) -- I have a dilemma concerning the machining of open stair stringers on a new SCM Accord CNC router. T ...

Re: Thinking about upgrading router
A message posted at WOODWEB's CNC Forum (1/31) -- We are a custom shop, but to help with the cash flow, we started cutting melamine closet parts for ...

Re: How man hours are related to Production
A message posted at WOODWEB's Business and Management Forum (1/31) -- Big Tup 1 hour for all on the router, max 2 the most. Return onion skin so noth ...

Re: Tersa cutter head
A message posted at WOODWEB's Solid Wood Machining Forum (1/31) -- Thanks for the responses, but I didn't mean to continue the debate about the virtu ...

RE: Debarkers
A message posted at WOODWEB's Sawing and Drying Forum (1/31) -- To minimize the bandsaw blade wear & tear, we have a debarker unit attached to th ...

Clear grain filler
A message posted at WOODWEB's Finishing Forum (1/31) -- Built a 5' x 5' pedestal table, made of Chinquapin Oak, resembles White Oak. Using SHER-WOOD® ...

Re: phase inverters pros and cons
A message posted at WOODWEB's Sawing and Drying Forum (1/31) -- I looked that one up "eBay mostly... quick search shows item 221668300083 is a u ...

Re: Biesse/Microvellum code error
A message posted at WOODWEB's CNC Forum (1/31) -- is the file a .cix / .iso / .dat I suspect as stated in previous posts the problem is lead in/out s ...

Re: Rover A3 Horizontal Boring
A message posted at WOODWEB's CNC Forum (1/31) -- it looks like your drills are not set up for symmetrical drilling..the ones one the left should in ...

Diner style countertop
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- I have a customer that wants to have a kitchen table made that looks like an old time din ...

Driliing speed/feed
A message posted at WOODWEB's CNC Forum (1/31) -- Hi All Sort of in response to a post about a shopbot in another forum and my own curiosity, what ar ...

Re: How man hours are related to Production
A message posted at WOODWEB's Business and Management Forum (1/31) -- Evan, I like the idea of tracking time on an app. all of my employees have smar ...

Balsa Core
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- Just had a rep bring in a sample of some Balsa core ply. It has a balsa core and 1/8" ...

Re: Doweling plywood cabinets
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- We used a Lobo machinery with our PTP and then router for years. It was fine. We did exac ...

Microvellum for BOSS flat table router
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- is anyone using Microvellum nested software on a BOSS flat table? What is the cost for th ...

Re: Clear grain filler
A message posted at WOODWEB's Finishing Forum (1/31) -- I use CrystaLaq Clear Wood Grain Filler. Works awesome and I found the best price on Amazon. ...

Re: Microvellum for BOSS flat table router
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- The Boss comes with RouterCad/Cam software. I would call and talk to Tony @ RouterCad bef ...

Re: Rover A3 Horizontal Boring
A message posted at WOODWEB's CNC Forum (1/31) -- Yes- is the panel length correct ? The tool table will compensate for the tool length plus clearanc ...

Re: New Edgebander
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- Also interested in a 300 series bander. Was wondering what you decided to go with. I was ...

Re: Add softstart to std 3ph compressor motor?
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (1/31) -- Hey look into star delta, it is a method of bringing 3ph online s ...

Re: Double stacking cutters on a shaper
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- FWIW I put the Digi Fence on a Powermatic, works as advertised and easy to install. ...

Re: has anyone ever ordered cabinets from this site
A message posted at WOODWEB's Cabinetmaking Forum (1/31) -- You would have to be nuts to order your cabinets from a website. ...

Re: Machining Curved Handrail
A message posted at WOODWEB's Solid Wood Machining Forum (1/31) -- Laminate curved blank. 1/4 knife on shaper. ...

Re: Clear grain filler
A message posted at WOODWEB's Finishing Forum (1/31) -- Chris, That looks like it might be the perfect answer. ...

Re: Thinking about upgrading router
A message posted at WOODWEB's CNC Forum (1/31) -- What is is that your router lacks ? ...

Re: Router bit storage
A message posted at WOODWEB's WOODnetWORK Forum (1/31) -- No picture (I'll be back in the shop by Tuesday) but we simply placed a piece of 5/4" ...

Re: 3D CAD for Cabinet Design and Production
A message posted at WOODWEB's CAD Forum (1/31) -- I have to agree with Ken. eCabinets and Thermwood are made for each other and you can design almost ...

Aluminum Reveals
A message posted at WOODWEB's Architectural Woodworking Forum (1/31) -- I am bidding a couple of jobs that have an aluminum 'U' channel 3/4" x 1 ...

Re: 3D CAD for Cabinet Design and Production
A message posted at WOODWEB's CAD Forum (1/31) -- The Layer names are defined by the user so you can set them up to match whatever your Thermwood req ...

Re: 3D CAD for Cabinet Design and Production
A message posted at WOODWEB's CAD Forum (1/31) -- Thanks Richard, I will take a look. I am not so far along with Inventor that I couldn't change gear ...

Re: sloppy cope and stick joinery
A message posted at WOODWEB's Solid Wood Machining Forum (1/31) -- I have had that problem a few times, and when I did, it was always the bearings. W ...

Re: Min. depth for tall freestanding shelving units
A message posted at WOODWEB's WOODnetWORK Forum (1/31) -- Mount the casters to a 1/2" plate steel that is 18 x 70 and that will add 250+/- lbs. ...

Re: Aluminum Reveals
A message posted at WOODWEB's Architectural Woodworking Forum (1/31) -- It can be rolled to a radius, a local steel fabricator may do this for you. I ...

glue squeeze out
A message posted at WOODWEB's Adhesives Forum (1/31) -- i use tite 2 glue . how do you deal with glue squeeze out ??? do you let it dry than try to s ...

Re: Min. depth for tall freestanding shelving units
A message posted at WOODWEB's WOODnetWORK Forum (1/31) -- I hadn't thought of lowering the cog. Slick. ...

Re: 3D CAD for Cabinet Design and Production
A message posted at WOODWEB's CAD Forum (1/31) -- If you have a thermwood, why don't you use ecabinets? ...

Re: black spotting when flattening veneer
A message posted at WOODWEB's Veneer Forum (1/31) -- Thanks, I will try new glue in fresh mixture. ...

Alaskan Yellow Cedar
A message posted at WOODWEB's Adhesives Forum (1/31) -- I am going to be gluing up a bunch of 22" wide 3/4" thick panels of AYC Is there an ...

Kiri wood not Kiwi wood
A message posted at WOODWEB's Furniture Making Forum (1/31) -- A correction to my post on 1/23. The wood I am looking for is kiri (paulownia). I need ...

Re: Cedar Chips for sale?
A message posted at WOODWEB's Value Added Wood Processing Forum (1/31) -- I put an add on CraigsList and get about 50 responses! Same with all my scr ...

Re: Finishing of redwood tables. Indoor use
A message posted at WOODWEB's Finishing Forum (12/30) -- Russ - that's a nice looking table and very sturdy as well.... Blanchon Hard Waxoil contains ...

Re: MLC Polarion and Red Oak
A message posted at WOODWEB's Finishing Forum (12/30) -- Thanks for the data sheets Leo. Unfortunately they don't shed much light on this situation t ...

Re: can't find the right help
A message posted at WOODWEB's Business and Management Forum (12/30) -- Correct- I forgot to mention Leadership has to lead the way both in goals and ...

Re: MLC Polarion and Red Oak
A message posted at WOODWEB's Finishing Forum (12/30) -- I didn't use a squeegee to move it around but I did do something similar. I sprayed on a 2 m ...

Re: Blumotion clearances
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- I apologize for being presumptive. Let me be more specific: I am talking about drawer fr ...

Re: Fast drying glue and Case Clamps
A message posted at WOODWEB's Adhesives Forum (12/30) -- Just like the one you have, the newer Gannomat clamps run on "electric screw" aka ...

Re: Qualspray spray guns
A message posted at WOODWEB's Finishing Forum (12/30) -- One of the guns i am looking at is the AM-6008 LATEX for the heavy bodied enamel with the pr ...

Re: Tigerply prefinished
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Here in Florida,mist called dragon ply and although most of my cabinetry which is euro f ...

Blumotion clearances
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- We do not use mechanical slides when we do drawers, but we have a customer that is insis ...

Re: Trying to use pre-finished ply. interiors
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- We build only frameless cabinets, but have been using the lamello clip system for almost ...

Re: Boring patterns-Line and Construction
A message posted at WOODWEB's CNC Forum (12/30) -- Yep. I would do it all on the Masterwood and use the Ritter for horiz boring on the decks tops and ...

Re: Qualspray spray guns
A message posted at WOODWEB's Finishing Forum (12/30) -- I just bought a Qualspray AM-6008/PPS. It's a bottom feed HVLP gun with a pressure assisted ...

Re: Fast drying glue and Case Clamps
A message posted at WOODWEB's Adhesives Forum (12/30) -- High Volume and 20 minute clamp times don't compute. Neither does spending two days to finis ...

Half circle vanity
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- I have a customer that wants a 1/2 circle vanity with raise panel sides and doors. Actua ...

corner cupboard doors binding
A message posted at WOODWEB's Finishing Forum (12/30) -- I got a corner cupboard from a customer that was in a barn. I got it stripped , repaired and ...

Re: Qualspray spray guns
A message posted at WOODWEB's Finishing Forum (12/30) -- Mike, try finishsystems.com like l said I have no hands-on experience with these spray guns ...

Re: Blumotion clearances
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- As I read the question, the OP is referring to the drawer front clearance. I build euro ...

Re: Fast drying glue and Case Clamps
A message posted at WOODWEB's Adhesives Forum (12/30) -- The reason for the lengthy dry time is the amount of time/length the unit travels after they ...

Re: Trying to use pre-finished ply. interiors
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- We have a lot of guys using the Tenso connector for just this application: flat finishin ...

Re: Blumotion clearances
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- 3/32" will work, at minimum, 1/8" is less demanding. They are a little spongy ...

Re: 12mm Baltic Birch
A message posted at WOODWEB's CNC Forum (12/30) -- Ask your supplier, there is actually a better qty version with close thickness tolerances witch I ...

Re: Boring patterns-Line and Construction
A message posted at WOODWEB's CNC Forum (12/30) -- Might I suggest cutting slightly oversize and trimming square on the PTP? Also, I make my top stre ...

Re: Blumotion clearances
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Bruce - well stated. That is exactly what I'm looking for. And you mentioned the changes ...

Re: QS white oak end grain spotted appearance
A message posted at WOODWEB's Solid Wood Machining Forum (12/30) -- Pretty sure it is a normal characteristic of the color variations in the White oa ...

Re: paint sparayer
A message posted at WOODWEB's Finishing Forum (12/30) -- What kind of paint? Many paints have a much higher viscosity than clear coats or pigmented l ...

Re: Gravity feed gun recomendations
A message posted at WOODWEB's Finishing Forum (12/30) -- Not sure if you made a move, but I'll tell you I second Nick advice as I too have the CAT gu ...

Finishing of redwood tables. Indoor use
A message posted at WOODWEB's Finishing Forum (12/30) -- My boss has me finishing a redwood table that we made from reclaimed wood from old water tan ...

Re: MLC Polarion and Red Oak
A message posted at WOODWEB's Finishing Forum (12/30) -- LeoG: Would it help to take and wipe or squeegee the sealer coat into the oak, let dry, sand ...

Re: Crackle finish
A message posted at WOODWEB's Finishing Forum (12/30) -- Mike, Lacquer is used to make a crackle finish - it's an evaporative finish - not a cross-li ...

Re: Nail hole touch up on Conversion varnish
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- Shoot the nails through 3M's tape for delicate surfaces. Then use th ...

Re: Half circle vanity
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- If their pockets are deep enough I guess so. Convex or concave? Being only 36" wide ...

Crossband edging
A message posted at WOODWEB's Veneer Forum (12/30) -- Just curious how others of you do things. When doing springing or cross and edging do you do it ...

Laying out radius
A message posted at WOODWEB's CNC Forum (12/30) -- Hey everyone , I need to replicate some arch top doors . They are not a true radius they are more ...

Re: would you warranty this entrance door?
A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- Joel, In the latest picture that you posted it looks like there is a black l ...

Re: Removing Glass
A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- I first remove the trim,the Fein tool can help. Then take a heat gun to soft ...

Re: Frameless to face frame
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Thanks ML. I too hate the look of the wide stiles, don't know why anyone would do that u ...

Re: Aspan support question
A message posted at WOODWEB's CNC Forum (12/30) -- I went down the Aspan road about 12-13 years ago. Tech support was in Italy and definitely not in ...

Re: MLC Polarion and Red Oak
A message posted at WOODWEB's Finishing Forum (12/30) -- Leo - I could not find a tech data sheet for this product - it must be new to the market. Ar ...

Re: Qualspray spray guns
A message posted at WOODWEB's Finishing Forum (12/30) -- I've been using a Qualspray SP-200 for several years to spray sanding sealer and light prime ...

Re: Blumotion clearances
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Are you referring to the 563H or 563F under mounts? The 4570's are the 18" glides. ...

Re: Qualspray spray guns
A message posted at WOODWEB's Finishing Forum (12/30) -- I'd be willing to bet that qualspray guns are rebranded Asturo spray guns. I haven't used th ...

Re: can't find the right help
A message posted at WOODWEB's Business and Management Forum (12/30) -- If you organize, you will have production, if you have production you will hav ...

Re: Accuspray Guns
A message posted at WOODWEB's Finishing Forum (12/30) -- I have been using the pps cups for several years and have never had one leak and I would't u ...

Re: Half circle vanity
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- I have made them . I made a form of bending ply and applied a veneer to the faces after ...

Re: Blumotion clearances
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Yes, I try and have a 3mm gap between everything in the finished view. I'd like to see a ...

Re: Aspan support question
A message posted at WOODWEB's CNC Forum (12/30) -- SCM still supports Aspan. Call in and ask for the software department. If they need to connect rem ...

Re: Blumotion clearances
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- To be clearer. The Drawer side thickness is what is needed. The 563H has a max thickness ...

Aspan support question
A message posted at WOODWEB's CNC Forum (12/30) -- Does anyone know if there is anybody in the US that supports aspan since S C M is no longer suppor ...

Re: MLC Polarion and Red Oak
A message posted at WOODWEB's Finishing Forum (12/30) -- Yes Paul, I am using their sealer. I have the PI sheets, I'll upload the PDFs if the site le ...

Re: Finishing of redwood tables. Indoor use
A message posted at WOODWEB's Finishing Forum (12/30) -- Here's the highlighted version of the article. ...

Re: 12mm Baltic Birch
A message posted at WOODWEB's CNC Forum (12/30) -- Thanks Robert, I will ask about higher grade stock from several suppliers. ...

Re: Blumotion clearances
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- We use 3mm clearance as well. ...

Re: Holiday Greetings
A message posted at WOODWEB's Business and Management Forum (12/30) -- Have a great New Year! ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/30) -- As BH and others have pointed out, this is a great thread. It certainly has pr ...

Re: how our employees ignore our attempt at systems
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Good question. First thing is to ask yourself if it matters, or if it is something that ...

Re: End Grain Top Cupping
A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- Flip it over under the heater and wait til it's almost flat, then remove the ...

Re: what type of sawmill
A message posted at WOODWEB's Sawing and Drying Forum (12/30) -- It would help to have a little more information. What size root balls? Just a few, o ...

Re: Double stacking cutters on a shaper
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- To each their own, but cranking a spindle up or down an inch to a preset known dimension ...

Re: Double stacking cutters on a shaper
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Kevin has discovered what I found. Convert the whole shop and put down that tape measure ...

Re: Double stacking cutters on a shaper
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- The readout display box is connected to the actual reader by a small cable - like a phon ...

Re: Pulling hair out over 3 phase
A message posted at WOODWEB's Solid Wood Machining Forum (12/30) -- I have had two different power suppliers over the years and both were the same, 1 ...

End Grain Top Cupping
A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- We glued up a Walnut end grain top that is 3" thick, 54" wide, and ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/30) -- @Cabmaker: I regret to inform you that the Times, in its infinite wisdom, has ...

Re: what type of sawmill
A message posted at WOODWEB's Sawing and Drying Forum (12/30) -- I (or my team - a fab guy, a mechanical engineer/draftsman and me, the crazy guy wan ...

Re: Pulling hair out over 3 phase
A message posted at WOODWEB's Solid Wood Machining Forum (12/30) -- Something about the previous posts sounded funny so before saying anything I went ...

Re: finishing walnut
A message posted at WOODWEB's Finishing Forum (12/30) -- I once had boards of all the species with the common stains represented in five by five inch ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/30) -- I will touch on this, the next 30 years are not going to be like the last 30 y ...

Re: End Grain Top Cupping
A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- It is radiant heat. We have done a number of solid wood edge grain tops but ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/30) -- I can understand why you prefer this be an ideological response on the part of ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/30) -- Pat, How could you arrive at the conclusion that Paul's column did not fit wel ...

Re: what type of sawmill
A message posted at WOODWEB's Sawing and Drying Forum (12/30) -- If you are routinely cutting slabs that size, you may want to consider a swing blade ...

Re: Double stacking cutters on a shaper
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- I have the prostop on a jet xacta fence. Its fantastic. It is more accurate than I would ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/30) -- I'm sorry to hear that Paul, but lets face it your column doesn't fit in with ...

Re: End Grain Top Cupping
A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- Yes, the edges are turned up to the heater. I think the heater is doing a lo ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/30) -- This is a great discussion and a huge amount of good advice has been presented ...

Re: Double stacking cutters on a shaper
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Having one digital readout shaper, I know that it doesn't get any easier than cranking t ...

flipper hardware
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- I've got an appliance garage that will get a top hinged door that will flip up and slide ...

Re: sanders for high gloss finishes
A message posted at WOODWEB's Finishing Forum (12/30) -- i achieve EXCELLENT results using the schedule above. again, i emphasize the acrylic cv. reg ...

Re: woodmaster planer
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/30) -- After looking at several web sites about the dust collection for ...

Re: Double stacking cutters on a shaper
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- I was thinking of the fence. They have one on their site for table saw fences, just not ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/30) -- Pat, You are a pretty logical guy. Wouldn't the longevity of this particular b ...

Scmi S630
A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- I just purchased a used SCMI S630 thickness planer. I'm looking to add an ai ...

Re: what type of sawmill
A message posted at WOODWEB's Sawing and Drying Forum (12/30) -- Dave, Thanks for your input. The business foundation is to process root balls, large ...

Re: Pulling hair out over 3 phase
A message posted at WOODWEB's Solid Wood Machining Forum (12/30) -- Running it in for free sounds like the way to go. I would check to see if they pu ...

Re: Double stacking cutters on a shaper
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- If you want a digital read out I have one I am not using. Bought it for a planer but the ...

Re: Double stacking cutters on a shaper
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Pat, not sure if you are asking for the fence or blade. This is for height adjustment an ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/30) -- "How could you arrive at the conclusion that Paul's column did not fit we ...

Re: what type of sawmill
A message posted at WOODWEB's Sawing and Drying Forum (12/30) -- Are YOU actually building or you having it built???? I would like to see pics. Hud-s ...

Re: End Grain Top Cupping
A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- The heater is drying out one side. Are the edges turning up towards the heat ...

Re: Hammer 3 head shaper
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Ritter makes a similar machine for the purpose of cutting frame and panel doors. It has ...

Re: Double stacking cutters on a shaper
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Sorry to turn this post into an adverstisement for proscale, but I thought it was worth ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/30) -- Just an anomaly before they realized this sort of column did not align with th ...

Re: End Grain Top Cupping
A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- What type of heater? Radiant heaters will cause more issues than forced air ...

Re: Cabinet Vision Dovetail drawers support
A message posted at WOODWEB's CAD Forum (12/30) -- I follow all instructions for setting and still something was wrong. Is actually setup package for ...

Re: Cabinet Vision Dovetail drawers support
A message posted at WOODWEB's CAD Forum (12/30) -- Just the instructions. You might be better off asking for some specific assistance on esupport. Wh ...

Re: End Grain Top Cupping
A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- Titebond 3. The lumber was kiln dried and the top has been glued for a week. ...

Re: Laminate with roundover and finished edge
A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/30) -- Are you wanting to do just the top roundover? if so, do you know what t ...

Re: Leadership for dummies?
A message posted at WOODWEB's Business and Management Forum (12/30) -- Uh o,here we go,,please start your own thread guys I want to keep this one on ...

Re: Cabinet Vision Dovetail drawers support
A message posted at WOODWEB's CAD Forum (12/30) -- Do you have esupport? There is a download on there with all the settings included. ...

Re: Double stacking cutters on a shaper
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Thanks again Kevin, calling them now. Also thanks Dave. ...

Re: Double stacking cutters on a shaper
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- BTW how would the digital readout work on a table saw? ...

Re: End Grain Top Cupping
A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- What type of glue was used and how long has the piece been drying? ...

Re: Double stacking cutters on a shaper
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Bruce will that work on a table saw? ...

Re: Cabinet Vision Dovetail drawers support
A message posted at WOODWEB's CAD Forum (12/30) -- I found support and looks that is ok now Thanks ...

Cutter head
A message posted at WOODWEB's Architectural Woodworking Forum (12/30) -- Does anyone know where I might find one of these? ...

Re: flipper hardware
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Accuride 1234 last time I used one ...

Re: Double stacking cutters on a shaper
A message posted at WOODWEB's Cabinetmaking Forum (12/30) -- Thanks Kevin ...

Re: Biesse works & BSolid
A message posted at WOODWEB's CNC Forum (12/30) -- check you tube ...

Re: Cracking paint/caulk where crown meets ceiling
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- For us personally (GC who does all on many jobs) we caulk nearly eve ...

Re: Cracking paint/caulk where crown meets ceiling
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- Very informative response again mike, thx! When you cut your blocks ...

Re: Out of state hourly work
A message posted at WOODWEB's WOODnetWORK Forum (12/30) -- 23 years ago I was the "helper" on office furniture suites delivery and set up s ...

Re: Beaded doors
A message posted at WOODWEB's Solid Wood Machining Forum (12/30) -- Mitered is obviously the easiest way to go. Or, more time consuming - but you can ...

Re: Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- A laser level easily puts a line on your radius corners. Or, bore a ...

Re: kitchen island installation
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- Pay close attention to just what is "supporting" on your b ...

Re: Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- Crown molding, as it is commonly known, will not make the transition ...

Re: Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- David, the point you are making has been broached many times here in ...

Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- In the somewhat near future, I will be attempting to do crown on vau ...

Re: Cracking paint/caulk where crown meets ceiling
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- I may post a more complete response soon but 1st step is to give the ...

Re: best splitter etc for powermatic 66 saw,
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- Why not invest in Saw Stop? It certainly won't teach you the right a ...

Re: Beaded doors
A message posted at WOODWEB's Solid Wood Machining Forum (12/30) -- Brad I don't believe it is cope and stick unless the bead was applied after, beca ...

Re: Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- Thank you for the input. Please correct me if im wrong here, but I r ...

Re: Knock down bed hardware
A message posted at WOODWEB's Furniture Making Forum (12/30) -- I only recommend traditional bed-bolt & nut fasteners, either boring through the ...

Re: Veneer Seam Showing After Finishing
A message posted at WOODWEB's Veneer Forum (12/30) -- edge glue the pcs together. use packaging tape like a hinge. glue edge and close the hinge and ...

Re: Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- To stay on the topic it's also possible to order radius crown moldin ...

Re: kitchen island installation
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- To keep a real clean look we will use a piece of plate steel cantile ...

Re: gluing 3 form
A message posted at WOODWEB's Laminating and Solid Surfacing Forum (12/30) -- We have been using "stealth" solid surface adhesive from Glue ...

Re: Desperately need 2 1/2" dust collection hose
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/30) -- For a quick and reasonable price wise RV sewer hose and see how ...

Re: Crown on vaulted ceilings
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- Thank you ML. You're right, i'm looking for possible solutions unles ...

Re: Cabin wood species
A message posted at WOODWEB's Sawing and Drying Forum (12/30) -- Seems to me that here (in KY) I have heard that they used chestnut and yellow poplar ...

Re: Old sycamore
A message posted at WOODWEB's Sawing and Drying Forum (12/30) -- Hey Dave, That is an exciting adventure. Good work !! ...

Re: Knock down bed hardware
A message posted at WOODWEB's Furniture Making Forum (12/30) -- Google "bed rail fastener" ...

Need Help Selling My Walnuts and 181 Acres Timber Virginia
A message posted at WOODWEB's Forestry Forum (12/30) -- Need Help Selling My Walnuts and 181 Acres Timber located in Big Stone Gap Virginia. I had a ...

creating spiral rope design in columns
A message posted at WOODWEB's WOODnetWORK Forum (12/30) -- Hello, I have 10 fir logs, 12 foot long, to be used for pergola columns. I wish to create ...

Re: Rope Lighting
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (12/30) -- Check out either Hafele America or Richelieu Hardware. Both have ext ...

Re: Lubricating Acme threads
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/30) -- For the lead screws on my CNC I use chain lube. Should work for ...

Re: Lubricating Acme threads
A message posted at WOODWEB's Dust Collection, Safety and Plant Operation (12/30) -- wax ...

Re: considering a partnership
A message posted at WOODWEB's Business and Management Forum (11/30) -- Pat Gilbert: For your "Millenial's Law", perhaps "Gilbert's Raz ...

Re: Biesse Rover 24 or 23FT and Vcarve Pro
A message posted at WOODWEB's CNC Forum (11/30) -- Did you set the z datum in Vcarve at the bottom of the material? That is what I do to get z axis c ...

Re: considering a partnership
A message posted at WOODWEB's Business and Management Forum (11/30) -- Ok so correct me if I am wrong but what most of you are saying is that in a gi ...

Re: considering a partnership
A message posted at WOODWEB's Business and Management Forum (11/30) -- I'm sure glad I don't do residential work. OR I'd have all those problems with ...

discolored thermo foil doors
A message posted at WOODWEB's Business and Management Forum (11/30) -- In 2008 I refaced a clients kitchen with high gloss white thermofoil doors. Th ...

Re: Anyone using good software to draw - note dimensions on pictures?
A message posted at WOODWEB's Business and Management Forum (11/30) -- there is an iPad app that will not only allow you to draw measurements on phot ...

Re: considering a partnership
A message posted at WOODWEB's Business and Management Forum (11/30) -- Blake: you're wasting your time here. Buy some equipment, rent a shop, and get ...

Re: considering a partnership
A message posted at WOODWEB's Business and Management Forum (11/30) -- You seem to know it all so just put your money where your mouth is. We do char ...

Re: finishes on mdf veneered and banded mdf kitchen doors.
A message posted at WOODWEB's Finishing Forum (11/30) -- You need to school the owner on surface tension. Explain to them that the sharp corners cann ...

Re: discolored thermo foil doors
A message posted at WOODWEB's Business and Management Forum (11/30) -- Do you still have enough info to get a quote on some new doors without a site ...

Re: Separating Lumber to sell
A message posted at WOODWEB's Sawing and Drying Forum (11/30) -- My suggestion is to determine how many board feet is the the best wood. Next step is ...

Re: considering a partnership
A message posted at WOODWEB's Business and Management Forum (11/30) -- My job is to make my customer's job easier. I do all I can to deliver on time ...

Re: Biesse Rover 24 or 23FT and Vcarve Pro
A message posted at WOODWEB's CNC Forum (11/30) -- Hi Paul I ran the program today and it worked but the z axis setting was not correct it went deepe ...

Re: sharpening a card scraper
A message posted at WOODWEB's Cabinetmaking Forum (11/30) -- I got it! I was trying too hard and I think I was rolling on too steep of an angle causi ...

Re: Biesse Rover 24 or 23FT and Vcarve Pro
A message posted at WOODWEB's CNC Forum (11/30) -- I never meant to say that Mozaik wasn't a good program. There are a couple of hiccups with the Bie ...

Re: White Conversion Varnish
A message posted at WOODWEB's Finishing Forum (11/30) -- wow. you really do learn something new every day. its interesting to know that these product ...

Re: White Conversion Varnish
A message posted at WOODWEB's Finishing Forum (11/30) -- I have used Aqua Prime in the past with several different solvent top coats,worked well with ...

Re: Separating Lumber to sell
A message posted at WOODWEB's Sawing and Drying Forum (11/30) -- Thanks for the reply. I was thinking of selling a set number of boards for x dollars ...

Re: Rover A 3.30PLC432>peripheral device not working .can open 0.15
A message posted at WOODWEB's CNC Forum (11/30) -- It seems like a connection error , I would contact biesse directly . They will most likely remote ...

Re: Double head board to for Queen size bed
A message posted at WOODWEB's Furniture Making Forum (11/30) -- Careful using those pressed steel taper connectors. Drop the end of a sideboard when ...

Re: Attaching floor to ceiling panels to wall
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (11/30) -- Lamello has a press-in connector that works really well. I've used i ...

Re: considering a partnership
A message posted at WOODWEB's Business and Management Forum (11/30) -- "Blake: you're wasting your time here. Buy some equipment, rent a shop, a ...

Re: Rover A 3.30PLC432>peripheral device not working .can open 0.15
A message posted at WOODWEB's CNC Forum (11/30) -- Unless you know how to internally diagnose your machine , you'll need their help. Can.open is almo ...

Re: considering a partnership
A message posted at WOODWEB's Business and Management Forum (11/30) -- The naive is strong in this one. But it is topped by inexperience and lack of ...

Cost of doing drawings
A message posted at WOODWEB's CAD Forum (11/30) -- Its been close to 10 years since I asked this question. It used to be the dollar figure for doing ...

Re: Separating Lumber to sell
A message posted at WOODWEB's Sawing and Drying Forum (11/30) -- When all the lumber is in one lot without sorting, it is called "mill run." ...

Rover A 3.30PLC432>peripheral device not working .can open 0.15
A message posted at WOODWEB's CNC Forum (11/30) -- Dear all, Thanks in advance Once we switch ON the machine lot of error error appearing. Can sugges ...

Re: discolored thermo foil doors
A message posted at WOODWEB's Business and Management Forum (11/30) -- They live two condo buildings from mine and I will be stopping by to see the d ...

Re: considering a partnership
A message posted at WOODWEB's Business and Management Forum (11/30) -- That is good Tony, I like the ring of it. Blake prefers to use the opposite of ...

Re: sharpening a card scraper
A message posted at WOODWEB's Cabinetmaking Forum (11/30) -- "A shaper that feels sharp either won't cut or won't cut for long." Because it ...

Re: considering a partnership
A message posted at WOODWEB's Business and Management Forum (11/30) -- Will there be an homage to Clint Eastwood on the wikipedia page? Maybe a Gif o ...

Re: Biesse Rover 24 or 23FT and Vcarve Pro
A message posted at WOODWEB's CNC Forum (11/30) -- I'll try setting the Z to the bottom tomorrow. The only holes I need is for shelves and hinge plat ...

Re: sharpening a card scraper
A message posted at WOODWEB's Cabinetmaking Forum (11/30) -- A sharp scraper (that cuts well) rarely feels sharp. A shaper that feels sharp either wo ...

Re: Rover A 3.30PLC432>peripheral device not working .can open 0.15
A message posted at WOODWEB's CNC Forum (11/30) -- Could be the Battery on the PC died and the Computer cant find the Software on bootup ...

Re: considering a partnership
A message posted at WOODWEB's Business and Management Forum (11/30) -- Back in the day, Pat Gilbert "stacked millennials like cordwood". ...

Re: considering a partnership
A message posted at WOODWEB's Business and Management Forum (11/30) -- Once again the antithesis of Occam's Razor... ...

Re: considering a partnership
A message posted at WOODWEB's Business and Management Forum (11/30) -- Mel > Blake. ...

Re: 12 foot cnc
A message posted at WOODWEB's Architectural Woodworking Forum (11/30) -- How many do you have? ...

Re: Pretty Good Review
A message posted at WOODWEB's Business and Management Forum (11/30) -- James Not in any order and not even a modicum of a complete list, and yes some ...

Cabinet Catalog Software?
A message posted at WOODWEB's Business and Management Forum (11/30) -- We want to create a catalog for architects, designers, and contractors to use ...

Re: So, how do I land side jobs?
A message posted at WOODWEB's Business and Management Forum (11/30) -- Kerry, I do not totally disagree with you, you have some valid points, but in ...

Re: Pretty Good Review
A message posted at WOODWEB's Business and Management Forum (11/30) -- Being rude likewise does not bolster any of your claims. Your claim is that fo ...

Re: So, how do I land side jobs?
A message posted at WOODWEB's Business and Management Forum (11/30) -- Mauricio ,in general I would agree that those who know custom typically don't ...

Re: So, how do I land side jobs?
A message posted at WOODWEB's Business and Management Forum (11/30) -- JSO, The side job problem is this: A prospective client notices your employee ...

Re: So, how do I land side jobs?
A message posted at WOODWEB's Business and Management Forum (11/30) -- I think you are having bad luck, Having said that are you getting calls and pr ...

Re: precat, cv or 2kP over prefin plywood
A message posted at WOODWEB's Finishing Forum (11/30) -- The first coat of everything is an adhesive bond. When you switch from primer to topcoat, yo ...

Variety of Joints
A message posted at WOODWEB's Architectural Woodworking Forum (11/30) -- The photo shows a variety of mortise and tenon joints that go into the parts ...

Re: Pretty Good Review
A message posted at WOODWEB's Business and Management Forum (11/30) -- In grade school math you learn that a line going down indicates a declining nu ...

Re: Pretty Good Review
A message posted at WOODWEB's Business and Management Forum (11/30) -- No, you can't explain it because apparently instead of simply saying yes, ok, ...

Re: Pretty Good Review
A message posted at WOODWEB's Business and Management Forum (11/30) -- Pat, It is absolutely not true that there was not inflation for the first 130 ...

Re: precat, cv or 2kP over prefin plywood
A message posted at WOODWEB's Finishing Forum (11/30) -- I wouldn't trust anything sticking to UV finished plywood for very long. The stuff I have be ...

Re: Pretty Good Review
A message posted at WOODWEB's Business and Management Forum (11/30) -- If there is no free market then how did we get Google, Apple, Go Pro Cameras, ...

Re: precat, cv or 2kP over prefin plywood
A message posted at WOODWEB's Finishing Forum (11/30) -- Lowes sells import ply pre primed with white primer, just scuff and spray. I have successful ...

Re: Corner mantel/Ent. Center/ ??
A message posted at WOODWEB's Cabinetmaking Forum (11/30) -- With the space you have, you could easily put the TV on a lift so it would be concealed ...

Re: Pretty Good Review
A message posted at WOODWEB's Business and Management Forum (11/30) -- Pat, Your graph does not show zero. It shows up and down. You can say it shows ...

Re: Pretty Good Review
A message posted at WOODWEB's Business and Management Forum (11/30) -- Jonah No there was ZERO inflation during that time. As I stated the only excep ...

Re: Snipe on New 15" Grizzly Planer???
A message posted at WOODWEB's Solid Wood Machining Forum (11/30) -- Dave, I have that planer, and it has a spiral head. I really like the set-up for ...

Lt 40 super Hyd lubemizer issue
A message posted at WOODWEB's Sawing and Drying Forum (11/30) -- I know, I know, I let the cold weather get me and my Mill lube system froze before I ...

Re: Pretty Good Review
A message posted at WOODWEB's Business and Management Forum (11/30) -- dean c The point is that the inflation is not even and lags the initial increa ...

Re: Spar Urethane - Minwax vs. Varathane
A message posted at WOODWEB's Finishing Forum (11/30) -- I make a great deal of outdoor furniture (Adirondack style) and agree with both of the above ...

Re: Pretty Good Review
A message posted at WOODWEB's Business and Management Forum (11/30) -- another point- that dollar you buried in 1913 probably took a week of work to ...

Re: Variety of Joints
A message posted at WOODWEB's Architectural Woodworking Forum (11/30) -- Nice machining! The Shaper can be one of the most interesting machines to se ...

Re: Pretty Good Review
A message posted at WOODWEB's Business and Management Forum (11/30) -- Pat I respect ya , But I am not in favor of putting you in charge (humor inten ...

polyerythane
A message posted at WOODWEB's Finishing Forum (11/30) -- I am debating between safe coat satin poly and vermont naturals polywhey for low VOC bamboo ...

Re: Pretty Good Review
A message posted at WOODWEB's Business and Management Forum (11/30) -- The invisible hand is always there ,to pick your pocket. ...

Re: Pretty Good Review
A message posted at WOODWEB's Business and Management Forum (11/30) -- Maybe you need a basic math class? ...

The key to using epoxy adhesive
A message posted at WOODWEB's Adhesives Forum (11/30) -- Certainly, epoxy adhesives are excellent adhesives, but it seems that many users forget one ...

winter time sawing and stacking tips
A message posted at WOODWEB's Sawing and Drying Forum (11/30) -- hi i am a part time miller when i can escape from my real job and have collected a b ...

End grain veneer table top?
A message posted at WOODWEB's Furniture Making Forum (11/30) -- Will this work? The customer wants the table to look like a big chunk of wood. The pr ...

Re: cutting tapers
A message posted at WOODWEB's Solid Wood Machining Forum (11/30) -- What type of blade are you using? If it is a finish blade try the cut with a coar ...

Re: Cabnetware enhancements
A message posted at WOODWEB's CAD Forum (11/30) -- As Jim mentioned, CW has a very capable rendering engine. These are CW drawings as well. ...

rope moulder
A message posted at WOODWEB's Solid Wood Machining Forum (11/30) -- looking for instruction manual for a industrial rope moulding machine ...

Re: Troubles with the New Unibond 800 Formula
A message posted at WOODWEB's Veneer Forum (11/30) -- Switch to Pro Glue dry resin UF, comes in powder that mixes easily with water, has a low formal ...

Re: Designing a table to prohibit warping
A message posted at WOODWEB's Furniture Making Forum (11/30) -- My best defense against warping is using lumber I have stored inside for a long time. ...

Re: Intermediate veneer layer
A message posted at WOODWEB's Veneer Forum (11/30) -- Roger, we've had good luck with Gorilla Glue bonding veneer to aluminum car parts. Used it on s ...

Re: Salery for finish position
A message posted at WOODWEB's Business and Management Forum (10/30) -- Finisher with 20+ yrs. of verifiable experience. I understand perfectly what y ...

Re: Bosch or festool jigsaw
A message posted at WOODWEB's Cabinetmaking Forum (10/30) -- Pat, I'm referring to the stroke length (i think it's called that. Meaning... If the ove ...

Ritter Adjustments/Repairs
A message posted at WOODWEB's Architectural Woodworking Forum (10/30) -- I have a 13 spindle borer, which is a Ritter R-19F. We had it made so the sp ...

Re: Unlicensed Contractors
A message posted at WOODWEB's Business and Management Forum (10/30) -- "I will match his price if I get to match his level of quality, service a ...

Re: Unlicensed Contractors
A message posted at WOODWEB's Business and Management Forum (10/30) -- Crazy Talking, CA law is clear, the owners don't need to pay unlicensed contra ...

Re: Shop employees start time
A message posted at WOODWEB's Business and Management Forum (10/30) -- Your work shows that you have capable employees that can do some nice things. ...

Crown on a vaulted ceiling
A message posted at WOODWEB's Cabinet and Millwork Installation Forum (10/30) -- I would appreciate any tutorials, youtube vids, etc that will help m ...

Re: Ritter Adjustments/Repairs
A message posted at WOODWEB's Architectural Woodworking Forum (10/30) -- Bruce, I considered that once when this happened one time before. I disconne ...

Re: Ritter Adjustments/Repairs
A message posted at WOODWEB's Architectural Woodworking Forum (10/30) -- I haven't taken the exact ones you have apart but have mine, whatever they a ...

Re: Altendorf China
A message posted at WOODWEB's Cabinetmaking Forum (10/30) -- Nick, when the first Altendorfs from China hit the states in some time around 2005/2006 ...

--- Return to Top --- View More Results

Job Opportunities and Services Exchange Results:

There were no Job Opportunities and Services Exchange Results for this search term

--- Return to Top --- View More Results

Machinery Exchange Results:

There were no Machinery Exchange Results for this search term

--- Return to Top --- View More Results

Lumber Exchange Results:

There were no Lumber Exchange Results for this search term

--- Return to Top --- View More Results

Classified Ads Exchange Results:

There were no Classified Ads Exchange Results for this search term

--- Return to Top --- View More Results

Project Gallery Results:

There were no Project Gallery Results for this search term

--- Return to Top --- View More Results

Shop Gallery Results:

There were no Shop Gallery Results for this search term

--- Return to Top --- View More Results

Shop Built Equipment Gallery Results:

There were no Shop Built Equipment Gallery Results for this search term

--- Return to Top --- View More Results

Sawmill Gallery Results:

There were no Sawmill Gallery Results for this search term

--- Return to Top --- View More Results

Sawing and Drying Directory Results:

There were no Sawing and Drying Directory Results for this search term

--- Return to Top --- View More Results

Industry News Results:

Salice on Facebook
A message posted at WOODWEB's Industry News (9/6) -- I have just started a Salice America Face Book page. You will find links to good industry refere ...

Cabinet Pro SimplyPowerful® Software-Labels Carved On Parts With CNC Router
A message posted at WOODWEB's Industry News (10/31) -- Besides printing cabinet, part, and post-optimization labels, Cabinet Pro CNC now engraves lab ...

Learning Tools Get You Up to Speed with Mastercam
A message posted at WOODWEB's Industry News (10/31) -- Tolland, CT – Mastercam® has many learning tools for getting your shop up-to-speed with the so ...

What's New at Williams & Hussey?
A message posted at WOODWEB's Industry News (10/31) -- Williams & Hussey debuted what’s new with Williams & Hussey at IWF 2010 in Atlanta. “Our newly ...

Unique Machine & Tool Releases Two New Products
A message posted at WOODWEB's Industry News (10/31) -- Two New Products have recently been released for our “UNIQUE TOOLS” Product Line - The Automat ...

WalzCraft Announces Expansion of RTF/3D Laminate Color Options
A message posted at WOODWEB's Industry News (10/31) -- WalzCraft is pleased to announce the expansion of their line of Rigid Thermofoil (RTF) / 3D La ...

Williams & Hussey Introduces New Model 209 Molder
A message posted at WOODWEB's Industry News (10/31) -- Williams & Hussey Machine Co., Inc introduces its Model 209 Molder. It has a new lighter, high ...

Charles G.G. Schmidt Introduces New Laser Cut Low Noise Saw Blades
A message posted at WOODWEB's Industry News (10/31) -- Charles G. G. Schmidt & Co., Inc. carries a large selection of 10 ...

See Limtech's New CNC Router and Laser Systems - IWF Booth 7847
A message posted at WOODWEB's Industry News (7/31) -- Limtech Industries, Inc. will be introducing & releasing two brand new affordable industrial qu ...

See Limtech's New CNC Router and Laser Systems - IWF Booth 7847
A message posted at WOODWEB's Industry News (7/31) -- Limtech Industries, Inc. will be introducing & releasing two brand new affordable industrial qu ...

College of the Redwoods Student Takes Honors in AWFS Fresh Wood Competition
A message posted at WOODWEB's Industry News (7/31) -- Student Designs, Woodworking Skills Amaze, Excite Attendees LAS VEGAS − (July 22, 2011) C ...

AWFS® Fair Recycling Program Reduces Waste Sent to Landfill by 6:1 Ratio
A message posted at WOODWEB's Industry News (7/31) -- AWFS® Fair Recycling Program Turns Scrap from Show into Wood Chips for Nature Sanctuary LAS VEG ...

Biesse America and Canada AWFS Participation Follow Up
A message posted at WOODWEB's Industry News (7/31) -- Charlotte, NC – 07-27-2011: On July 20-23, 2011 Biesse was pleased to return to AWFS as an exhi ...

AWFS Show Follow Up New Tools
A message posted at WOODWEB's Industry News (7/31) -- At this years AWFS Show in Las Vegas QuickWood and Flap-Wheels.com show off some new tools for ...

Griffiths Receives Recognition from WoodLINKS USA
A message posted at WOODWEB's Industry News (7/31) -- Stiles Machinery is pleased to announce that Duane Griffiths, Director of Education for Stiles, ...

Leitz Earns Sequoia Award for RipTec Cutting System Innovation
A message posted at WOODWEB's Industry News (7/31) -- GRAND RAPIDS, MI — The Leitz RipTec cutting system was unanimously selected to receive the pres ...

IKEA Representative to Present at Upcoming Executive Briefing Conference
A message posted at WOODWEB's Industry News (3/31) -- GRAND RAPIDS, Mich. – Stiles Machinery is pleased to announce that Niklas Petersson from IKEA w ...

Osborne Wood Products Participates in London Trade Show
A message posted at WOODWEB's Industry News (3/31) -- On March 5th Osborne Wood Products travelled to London, England to take part in the EcoBuild Tr ...

Festool Introduces New TS 55 REQ Plunge Cut Saw
A message posted at WOODWEB's Industry News (3/31) -- TS 55 REQ Plunge Cut Saw Tools for the toughest demands The all-new TS 55 REQ is not your stand ...

SCM Group to Showcase Routech Accord in Operation at Technology Days
A message posted at WOODWEB's Industry News (3/31) -- The Accord FX range of CNC machines offers a complete set of solutions for the production of do ...

Delcam’s ArtCAM Pro Includes More Modelling Tools With Real-Time Updating
A message posted at WOODWEB's Industry News (1/31) -- Delcam has added a new ‘putty’ tool to the 2015 release of its ArtCAM Pro CADCAM software for a ...

--- Return to Top --- View More Results

Auctions, Sales, and Special Offers Results:

There were no Special Offers Results for this search term

--- Return to Top --- View More Results

Events Calendar Results:

There were no Events Calendar Results for this search term

--- Return to Top --- View More Results

Your search for woodweb found 56563 documents (of 57000 searched).
18028-19027 of the 56563 results are displayed below.

Search Link:

http://www.woodweb.com/cgi-bin/search/search.cgi?Realm=All&Terms=woodweb