• Knowledge Base Search Results: 30
    • Your search for corum found 30 documents (of 13219 searched).
    1-30 of the 30 results are displayed below.


    Knowledge Base Results:

    Air Velocities and Duct Sizes for Main and Branch Runs
    Large dust collection systems require complex airflow calculations. What do all the numbers mean? April 30, 2006

    Filtering Shop Air
    Dust collection for your machinery isn't a complete solution. There are reasons to have air filtering for fine dust in the shop air, as well.June 15, 2014

    Dust Collection for Orbital Sanders
    High-velocity vacuum dust collection for hand sanders is a separate system from the low-velocity system used for larger machinery. June 15, 2014

    CNC dust collection
    Installing a flexible hose for dust collection with CNC machinery. March 14, 2001

    Troubleshooting an Under-Loaded Dust Collector Fan Motor
    When a dust collector fan keeps drawing too many amps and trips the circuit breaker, troubleshooting involves comparing the system's capacity to its actual operating load. April 29, 2006

    Container-Bin Dust Collection Setup
    Shop owner describes a site-built rig for capturing dust and shavings using filters and a tarp on top of a shipping container. January 21, 2007

    Choosing a Dust Collector
    It's helpful to know the airflow capacity of a dust collector at various static pressures. October 3, 2008

    Individual Dust Collectors Versus a Centralized System
    Centralized setups save labor, but your whole shop is vulnerable to a breakdown on one machine. May 14, 2006

    Suspending Dust-Collector Ducts from the Ceiling
    Advice on hanging rigid and flexible ducting from a high ceiling for a dust-collector vacuum system. August 30, 2007

    Sound-Proofing a Dust-Collection Cyclone
    Suggestions for keeping the dust-collection setup from being the noisiest thing in your shop. June 15, 2014

    How Long Will it Take to Get a Dust Collection System Installed?
    Thumbnail description of the process and timeline to set up a new dust collection system, from on-the-drawing-board to operational. January 21, 2007

    Improving Dust Collection on a Widebelt Sander
    For better suction, use shorter, straighter runs of wider-diameter rigid duct (not flexible duct hose) September 24, 2006

    Choosing a dust collector
    Matching your system to the required CFM. March 16, 2001

    Outside Dust Collector Details
    Professional advice, including fire safety and noise control details, for a dust collector built onto a shop's exterior. November 25, 2005

    Fog-Proofing Your Goggles
    The biking and hockey worlds have solutions for preventing foggy facemasks. August 14, 2007

    Dust Collection: How Much is Too Much?
    There are drawbacks to a dust collection and vacuum system that is bigger than your shop needs. August 21, 2006

    Makeup Air Volume for a Spray Booth
    Quick tips on sizing the inflow air fan capacity to match a spray booth exhaust fan. November 8, 2007

    Dust collection system cost
    Calculating the cost of a dust collection system for your size shop. March 19, 2001

    Dust-Collecting Ducting in Slabs
    Comments on running dust-collection vacuum ducts under a concrete floor. August 21, 2006

    One- and two-stage dust collection
    What is the difference between these types of systems? March 16, 2001

    Custom dust collection fittings -- how to order?
    How to accurately specify custom fittings by long distance. March 16, 2001

    Increasing collection fan RPM
    Determining how much RPM that a fan can handle. March 19, 2001

    Sizing Dust Collection Duct Drops
    Advice on proper sizing for the duct drops to individual machines from a main dust collection duct. November 5, 2013

    High Speed Abort Gate for Dust Collection System
    This component activates to divert the duct airflow out of the building for fire safety in case of an explosion. October 20, 2013

    Plastic pipe and dust collection
    Why not? Here are some reasons. January 16, 2002

    Codes for Dust Collection in a Home Shop
    Navigating the building codes for a woodshop over a residential garage is tricky. July 22, 2013

    Ceiling-mounted dust collectors
    Recommedations on where to buy and how to build. January 16, 2002

    Troubleshooting a Cyclone Chip Clog
    Advice on making a cyclone stop clogging when when trying to separate large chips of light material. July 29, 2012

    Cyclones for Fine Sanding Dust
    A taller, more narrowly tapering cyclone seems to remove fine dust more effectively, but you'll still need a fine filter downstream of that. July 29, 2012

    Excess chips in filter bags
    Why are so many chips collecting in the filter bags? March 16, 2001

      ---   Return to Top   ---