Search Results from WOODWEB's Site Search Engine

Your search for van brussel found 30 documents (of 10779 searched).
1-30 of the 30 results are displayed below.

Knowledge Base Results:

Tape Issues when Joining Veneer

Veneer tape can cause minor defects at the seam. Here are some suggestions for preventing that problem. March 31, 2008

Stitches Telegraphing Through Cherry Veneer

Veneer pros help troubleshoot an puzzling bleed-through problem: stitches showing through over time in a Cherry veneer layup. January 11, 2007

An Antique Wood Scraper

Woodworkers puzzle over an old piece of shop iron and share some old-time lore. September 28, 2006

Troubleshooting Bowing in Engineered Flooring Layups

Veneer balancing issues, as well as glue characteristics, could explain why laminated engineered wood flooring panels are curling badly. December 29, 2008

Glues Interfering With Water-Borne Stain on Veneer

Advice on fixing a problem where glued veneer seams telegraph through water-borne stain finishes. June 9, 2007

Troubleshooting Failure with an Iron-On Dried-Glue Veneer Application

Pros discuss the probable reasons for bubbling of veneer that was applied using a hot iron and dried yellow glue. September 27, 2008

Removing Glue Bleed-Through on Veneer

Try your trusty scraper. November 27, 2007

Applying Veneer to an Automobile Dashboard

Veneer pros discuss vacuum bag and other techniques for making veneer conform to a three-dimensional surface like the gauge panel of a Jaguar automobile dashboard. August 8, 2010

Sanding Veneer to Thickness

Detailed advice on how to thickness-sand veneer with mid-range equipment. June 9, 2007

Veneering a Half Cylinder

Detailed comments on the choices relating to cauls, glue, vacuum bags, and other elements of veneering a half-cylinder. December 6, 2011

Veneering with a Clamp-and-Caul Setup

Veneering a large panel is best done with a vacuum press, but here's a description of how to do it with clamps. April 10, 2007

Black Stains on Curly Cherry Veneer

Figuring out the source of discoloration on a beautiful figured cherry veneer. June 28, 2006

Producing Wide, Thick Veneer

Pros share ideas for making maple and birch veneer at 2-foot width and 1/8-inch thickness. April 14, 2005

Veneer Cracking on Curved Doors

Advice on glue and substrate choices for preventing cracks in veneer applied to a curved flexible-plywood substrate. June 28, 2006

Veneer Glue Options

Pros tell which glue types they like for vacuum-bag veneering work. July 28, 2006

Getting a Good Bond with Paper-Backed Veneer

Quick tips on adhesive choice, prepping the paper surface, and using cauls for more even pressure to achieve better adhesion. May 30, 2011

Filling Torn Grain in Crotch Veneer

Advice on making an invisible repair to a torn veneer. May 18, 2010

Veneering a Cube

Ideas for applying veneer to the outside of a box. November 14, 2009

Shopping for an Edge-Gluing Veneer Splicer

Advice (and some sales pitches) on veneer splicer options. April 18, 2010

Veneer Panel Inlay Problem

"Lumpy" veneer causes trouble when routing for veneer inlay. Rigid glue and panel sanding are the suggested solution. January 13, 2006

Vacuum Bag Versus Frame Press

A frame press may be more convenient for one man to operate when veneering flat panels. September 15, 2006

Veneering the Inside of a Drum

Instead of vacuum, use an inflatable tube to apply pressure. October 15, 2009

Troubleshooting Expanding Veneer

What makes veneer expand overnight after application? Pros suggest possible causes and remedies. May 13, 2005

Prepping Raw Wood for PSA Veneer

The PSA adhesive will adhere better if the wood is prefinished appropriately. November 16, 2011

Iron Stain Caused by Veneer Slicer

Iron in steel slicer knives can cause staining of the product. August 8, 2010

Dryer Screen Marks on Sliced Veneer

Causes and cures for the "net-like" visual defect that sometimes appears on veneer. May 21, 2009

Heat Resistant Glue

Choosing adhesive for use in a potentially hot (or warm) location. March 26, 2013

Removing Veneer Tape Staining

Here's detailed advice on applying and removing veneer tape, and on sanding and finishing veneered panels afterwards. December 6, 2012

Pie-Slicing a Log

Quick description and info about a German-made saw that slices logs radially. July 15, 2012

Repairing Dents in Heated Veneer Press Platens

Repairs and workarounds may help (a full replacement would be costly). March 28, 2012

--- Return to Top ---

Your search for van brussel found 30 documents (of 10779 searched).
1-30 of the 30 results are displayed below.

Search Link:

http://www.woodweb.com/cgi-bin/search/search.cgi?Realm=KnowledgeBase&Terms=van brussel