Scmi selectra 12 FR
Listing #453797 Listed on: 12/16
|Listing Type:||Machine for Sale|
|Category:||Edge Band Under $20K|
|Model:||Selectra 12 FR|
Web link:||SCMI Selectra 12
|SCMI Selecta-12FR $32,000.00 now $11,500.00 This is a great machine |
• 1/2" Edgebanding thickness capacity, automatic strip & coil feed magazine with 3mm PVC guillotine.
• Fast heat up granular glue system, Teflon coated lower applicator glue pot, 1" dia. glue applicator roller with reverse rotation feature.
• Pressure Section: one large dia. Clutch controlled drive roller & two pneumatic pressure idle rollers, separate adjustment of drive & idle rollers with digital indicators.
• Workstations: Front & Rear end trim units (high frequency-12,000 rpm ea.), motors tilt 0° - 15° on horizontal plane. Top & Bottom flush/bevel trim units (high frequency-12,000 rpm ea.), digital readouts. Top & Bottom bevel/radius trim units (high frequency-12,000 rpm ea.), motors bevel from 0° - 15° with digital readouts.
• Corner Rounding: Trims leading, trailing, top & bottom edges/corners up to 3mm edgings. Frontal & Lateral copying guides, dust extraction.
• Scrapers: Top & bottom scrapers for 3mm PVC with top & bottom buffing.
• Feed Chain: Rubber Pads, Two feed speeds (12m/min, 18m/min), with manual feed for set-up & troubleshooting.
• Complete with insulated sound enclosure with large window area, Heated infeed fence, Rotating operator control panel, Frequency converter & used tooling. Replacement cost: $69,900
Contact this Seller (Andy):
(* denotes required fields)