BRANDT KDN-650 C Edgebander
Listing #494230 Listed on: 10/05
|Listing Type:||Machine for Sale|
|Category:||Edge Banders Over $20K|
|BRANDT KDN-650 C Edgebander (2003)|
Equipped with digital height indicator. Integrated electronic line control system for increased reliability and diagnostic assistance. No limit switches used for setting operating units. Control panel located at machine infeed for operator convenience. Universal automatic magazine for strip and coil feeding. Large coil table (800 mm diameter) to accommodate large coils of 3 mm PVC. Hot melt granulate glue application system with twelve minute heat-up time. Quick-change glue tank for easy maintenance and glue color change, if necessary. Reversible rotation of glue application roller. Retractable glue roller. Strengthened precutter for cutting PVC (max. 3 x 45 mm) from the coil. Infrared radiant quartz heating unit between glue roller and pressure zone for optimum gluing strength. First pressure roller driven and two idle pressure rollers. Double motor end trimming unit with straight and chamfer capability. Chamfer up to 15?. Program controlled indexing from straight to bevel end trimming. Fine trimming unit with digital Quickset system. Tilt range 0 25?. Program controlled indexing. Contour trimming unit for profile corner trimming. Sound enclosure with centralized dust extraction outlet. Scraping unit for rigid PVC edges. Program controlled indexing. Buffing unit. Electronic frequency changer for all trimming motors which also incorporates electronic motor brakes.
Technical Specifications: Edgeband thickness 0.4 12 mm (0.016″ 1/2 ), Coil cutoff maximum 0.8 x 45 mm, 3.0 x 45 mm (PVC) , Edgeband height 12 60 mm (1/2″ 2 3/8 ), Panel length min. 160 mm (6 3/8″), Panel width min. 65 mm (2 3/8″), Panel thickness min. max. 8 mm (5/16″) , 55 mm (2 3/16″), Feed speed two speeds 14 m/min (46 FPM) and 11 m/min ( 36 FPM ) when using the contour trimming unit the feed speed automatically adjusts to 11 m/min. Feed motor 2.2 kw (3 HP), Pressure Profile trimming unit top and bottom 0.3 kw (1/2 HP ea two motors), Electronic frequency changer , Electrical connection: 208/230 or 440/480 volt, 3-phase, 60 Hz., Dust extraction: 2x 100 mm (4″), 1000 CFM. Compressed air connection: 0.18 CFM per panel, 6 bar (85 PSI).
Automatic Height Adjustment with Top Pressure Beam for All Top Work Stations, PC-16 Program Control, Integrated Electronic Line Control System for Increased Reliability and Diagnostic Assistance , Automatic Magazine for Strip and Coil Feeding, Standard Gluing System, Sound Cover , End Trimming Station, Fine Trimming Unit, Contour Trimming Unit, Scraping Unit with Knives, Top and Bottom Buffing Unit
Contact this Seller (Andy):
(* denotes required fields)