Friulmac End Matcher
Listing #494306 Listed on: 10/08
|Listing Type:||Machine for Sale|
|Friulmac E Randomat End Matcher|
Serial number - #3521-A
2003 model year
For production of end matched flooring - two sliding "tenon" heads, one tongue and one groove.
Flooring is fed through servo belt feed to stops for cutter head travel to profile T&G.
Very nice production endmatcher.
440 Vt, 72 Ka, 60Hz, 50Amp circuit
Fully enclosed circuitry cabinet.
10" width x unlimited length
Well maintained machine from flooring mill.
Tooling for 3/4' T&G, two sets - square edge and eased edge
We have it set up on a steel box frame skid for ease of mobility.
Because these machines require that the infeed and outfeed tables be VERY accurately aligned to the main matcher frame, for consistent accuracy of cuts, they are not easily moved.
However, by attaching the components to our frame, we are able move the entire machine without affecting accuracy. Transportation and setup time is greatly reduced.
The overall frame footprint is - 8' wide x 25' long x 6.5' high at the electrical cabinet.
It's designed for forklift mobility,
This machine came out of our production flooring mill where we ran it
and maintained it from almost new.
It's a good machine for an enterprising flooring mill.
Contact this Seller (Barry Stup):
(* denotes required fields)