2007 Omnitech Selexx Pal 5x10 Fanuc EXCELLENT SHAPE
Listing #494438 Listed on: 10/12
|Listing Type:||Machine for Sale|
|Model:||Omnitech Selexx Pal|
|I have owned this wonderful machine since new. We have done routine weekly maintenance on this machine without fail. This machine is in great shape and is still under power to be viewed. Depending on timing i may be available to help setup machine at your facility and train for an additional fee. |
OmniTech Selexx Pal CNC Router (Used)
Model: Selexx Pal; Year: 2007
240/480v; 3ph; 60.
Equipped with: (1) Air cooled 10 HP HSK-63F Type ATC spindle, variable spindle speed from 1,000 - 24,000 RPM, 8-position front mount tool carousel;
5' X 10' Stationary table, moving gantry machine in a front-to-back configuration with a single zone vacuum table, and a BECKER "VFTL-250" 10 HP vacuum pump.
(1) 9-Spindle vertical drill bank (4-X, 4-Y and 1-C); routing spindle has full table coverage, the drill bank will cover full range of the table.
Fanuc CNC control with matching Servo amplifiers and AC Servo motors, network compatible WINDOWS PC based front end, color LCD, keyboard, 3.5" floppy drive, 1.6 GB hard drive, full function handheld pendant.
Features: Background editing, self-diagnostics, canned cycles, absolute & incremental programming, cutter & tool length compensation, feed rate & spindle speed override, inch/metric operation, and linear/circular & helical interpolation.
Complete with: Assorted HSK-63F tool holders and collets, technical documentation, and applicable software media.
Contact this Seller (Jeff Finney):
(* denotes required fields)