BRANDT KDF 660 Profiline - Very Little Use
Listing #494525 Listed on: 10/15
|Listing Type:||Machine for Sale|
|Category:||Edge Banders Over $20K|
|Model:||KDF 660 Profiline|
|BRANDT KDF 660 Profiline Automatic Edgebander -very little use!|
PC-20 Program Control:
- PC: Industrial PC, 600 Mhz, Front side USB port.
- Memory: 256 Mb ram, 1 Gb Flash Card.
- Screen: 12.1” Color, 800 x 600 pixel, Active TFT Screen.
- Internal modem for diagnostic link.
Motorized top pressure beam for panel thickness adjustment.
External coil feed and 2 coil supply holder.
Smooth upper pressure rollers.
Integrated electronic line control system for increased reliability.
Automatic feed track lubrication system.
Adjustable in feed fence.
Joint trimming unit for pre-trimming the work piece edge prior to processing.
Quick melt granulate glue application system with twelve minute heat-up time.
Quick-change glue tank for easy maintenance and glue color change, if necessary.
Infrared radiant quartz heating unit between glue roller and pressure zone for optimum gluing strength.
Program controlled positioning of the pressure zone. First pressure roller driven and three idle pressure rollers.
Double motor end trimming unit with straight and chamfer capability. Chamfer up to 15?. Program controlled indexing from straight to bevel end trimming.
Flush trimming unit with two position vertical indexing and program controlled pneumatic indexing of the unit.
Fine trimming unit with DFC cutter head technology, servo motor control for side copy positioning and to edge thickness for the unit. Auto tilt. Radius / straight DFC cutters included. This unit provides superior dust flow control of the trimmed chips and provides precise trimming due to location of the vertical copy rollers.
Contour trimming unit for profile corner trimming.
Sound enclosure with centralized dust extraction outlet.
Scraping unit for rigid PVC edges. Program controlled indexing.
Surface scraping unit.
PVC Post heater.
Electronic frequency changer for all trimming motors.
Electrical components according to UL/CSA Listings.
Edge band thickness 0.4 – 12 mm (0.016" - 1/2” )
Coil cutoff maximum 0.8 x 60 mm
3.0 x 45 mm (PVC)
Edgeband height 12 - 65 mm (1/2" – 2 9/16 ")
Panel length min. 160 mm (6 3/8")
Panel width min. 65 mm (2 3/8")
Panel thickness - min.
- max. 8 mm (5/16")
60 mm (2 3/8")
Feed speed – two speeds 16 m/min (52 FPM) and 11 m/min
( 36 FPM ) when using the contour trimming unit.
Feed motor 2.2 kw (3 HP)
Joint trimming unit – two motors
Cutting speed 2.2 kw ( 3 HP each )
Pressure section First roller driven, three rollers idle
End trim unit - two motors
Straight cut max. .35 kw (1/2 HP ea)
12 x 40 mm (1/2" x 1 5/8")
Flush trimming unit
Cutter speed .55 kw (3/4 HP each
Fine trimming unit-auto tilt
Cutter speed .55 kw (3/4 HP each)
Profile trimming unit - top and bottom 0.3 kw (1/2 HP ea - two motors)
Total power required 15 kw
Amperage @ 230
@ 460 60 amps
Machine length 6360 mm (20' 10”)
Machine width 1730 mm (68")
Working height 900 mm (35.5")
Total height 1600 mm (63")
Machine net weight 2800 kg (6160 l
Contact this Seller (Andy):
(* denotes required fields)