AutoCoat STDCOAT Mud box Foam Coater
Listing #504966 Listed on: 12/20
|Listing Type:||Machine for Sale|
|Model:||AutoCoat Xydroid STDCOAT|
Web link:||More From Albright
Foam Coater AutoCoat STDCOAT Schematic:
FOAMCT4A.S01 Foam Coating Machine
3 units in Picture 2 units still available
The XYdroid Foam Coat Machine is designed to extrude a cement-based coating onto a piece of EPS foam. The machine is controlled with PLC circuitry to control the direction and speed of the extrusion paddle. A piece of EPS is placed upstream of the filled mud box that has the previous piece in it, and when the user presses the Start button, the machine will push the piece of EPS through the mud box, thus extruding a coating on the piece.-
Whether you are in the plastering, pre-cast business, or would like to expand your existing foam shop, you will see the advantages of producing coated foam shapes with Xycorp's Linear Coating Machine. With the reduced labor cost and the added value in EPS coated foam shapes this machine will in most cases pay for itself in the first year.
Coats EPS linear foam shapes
Variable speed motor
Evenly coating every time
If using Xycorp's Auto-Coatฎ foam coating material you will not need to mesh the EPS Foam prior to coating.
Controlled by a PLC (Programmable Logic Control)
Proximity sensor switches to control and adjust the length of both the forward and return stroke.
Forward and return speeds can be controlled independently
Controls are enclosed in a protective box under the table
Solid steel frame to withstand the rigors of a production environment.
Accommodates up to 96" long & 32" wide pieces
Coat up to 800 linear feet in about an hour
120V 1Ph 10amp
Contact this Seller (Lorena):
(* denotes required fields)