Used Glue Drill and Dowel Insertion Machine
Listing #505456 Listed on: 01/10
|Listing Type:||Machine for Sale|
|CNC controlled drill and dowel inserting machine|
Can process up to 4 parts per set up by utilizing right, right center, left center, and left positioning or the center stop can be retracted for working large panels
4 workpiece clamps activated by foot pedal hold piece at each station
Configured for use of pre-glued dowels (connect directly to water supply - not tanks)
Pneumatic control of center stop as well as left and right fences
Open end table design, allows for machining of parts longer than 48" on limited basis
CNC positioning of the X,Y, and Z axes
Oversized digital AC servo motors
Maximum panel length: 49.2"
Minimum panel length: .79"
Maximum panel width: 31.5"
Minimum panel width: 1.97"
Maximum panel thickness: 2.36"
Minimum panel thickness: .39"
Maximum panel length for active center stop: 23.5"
Horizontal drilling aggregated with (3) individually selectable spindles
(1) dowel injector (32 mm distance from drilling spindle)
Glue injector (currently water) with adjustable glue/water amount
Dowel size: 8 x 30/8 x 35 mm
Vibrating hopper for automatic dowel feeding
Low pressure pump for water/glue
Microsoft Windows based control with WoodWop programming
Large 17" display
Machine software bundle (preloaded on machine): WoodWop, ABDWork, Tool Data Base, Production List Software, Schuler MDE Basic
Includes: manuals, CD, as well as PDF versions stored on machine containing operations and maintenance instructions
Drill shank diameter: 10 mm
Total length of drill bit: 70 mm
Amperage (nominal): 16/8 Amps @ 208/480 Volt
Note: Voltage supplied must not fluctuate in excess of +/- 5% of its stated value
Multi-tap transformer for 208/230/460/480 volt operation
Compressed air requirement: 102 psi (7 Bar)
Dust extraction outlet: 80 mm
Machine dimensions: 101" L x 50.6" W x 75.6" T
Machine weight: 2,645 lbs.
Cleaned and Checked with Warranty
Contact this Seller (Andy Shook):
(* denotes required fields)