LAGUNA LT37 15HP, 3-PHASE, 37" BANDSAW
Listing #506691 Listed on: 03/01
|Listing Type:||Machine for Sale|
Web link:||Laguna LT37 Bandsaw Web Page with 17 Images
|LAGUNA LT37 15HP, 3-PHASE, 37" BANDSAW|
Less than 10 hours of use & 24" resaw capacity
This Laguna LT37 Bandsaw was purchased new in June of 2015. It has less than 10 hours of use. The Laguna LT37 Bandsaw excels at resawing and at 15hp has the power to cut through tough and large material. The information supplied by Laguna on their website and other promotional material is incomplete and inaccurate. What they don't mention is that the upper guide raising & lowering mechanism only lowers to within 2-3/4" or so to the table top. A custom spacer block (included) brings the raising & lowering mechanism all the way to the table top enabling the user to cut thin stock. The table tilts on a rabbet-like mechanism, not rack and pinion. Only the upper guide raising mechanism is rack and pinion. To use a blade narrower than 1/2" you have to purchase a special lower guide at $295, which is included with this bandsaw.
Motor: Baldor 15hp, 3 Phase, 208/230/460 Volt. Wired 230 Volt
Amp breaker: 50amp, 3-phase (check with a licensed electrician for determining wiring gauge size and circuit breaker size.
Resaw Capacity: Approximately 24"
Table Size: 31" x 50"
Minimum Blade Width: 1/4". Any blade less than 1/2" wide requires the optional Lower Guide Ceramic Cool Block Guide which is included with this machine.
Maximum Blade Width: 2"
Blade Guides: Laguna Ceramic.
Blade Length: 261" (260"-263")
Table Height: 42"
Upper Guide Raising Mechanism: Rack & Pinion
Table Tilt Mechanism: Large lock nut with Curved Rabbet sliding mechanism.
Base Size: 23" x 54".
Net Weight: 1610 lbs.
Made in Italy.
Specifications are deemed accurate but not guaranteed.
PRICE & WHAT'S INCLUDED
Laguna LT37 Bandsaw-New Cost: $12,000
Lower Blade Guide for 1/2" or narrower blades: $295.00
Custom upper guide spacer block: $150
Three (3) NEW 3/8" x 261" x 4TPI Proforce Laguna Bandsaw Blades: ($75.00 each) $225.00
One (1) NEW 3/4" x 261" x 43TPI Proforce Laguna Bandsaw Blade: $80.00
Two (2) NEW Table Top Throat Inserts: ($35.00 each): $70.00
15 feet 6/4 SOOJ electric cord with 50 Amp plug and receptacle: $80.00
4 Pairs Extra Ceramic Cool Blocks ($125 each pair): $500.00
6" Dust Hoses, Hose Clamps, 6-6-6 'Y'-Adapter, 6" to 4" Reducer & Rockler Dust Right® 4" Tool Port: $125.00
TOTAL NEW PRICE $13,530.00. SELLING FOR $8250.00 FOB Albuquerque, NM
Payment Terms-Cash only for pickup. If shipping, a cashier check or money order. Shipping will be delayed 10 business days for the check to clear. PayPal is not available for this machine. Payment in full prior to delivering if delivering per info below:
The customer is responsible for all freight and shipping fees.
To ship by common carrier the bandsaw would have to be put on its spine and a special crate would need to be built. The fee is $700.00 for the crate.
If at all possible, it's recommended that the bandsaw be picked up on a flatbed trailer if within 1000 miles of Albuquerque, NM. Will palletize or similar at no charge or...
I will deliver within the following distances and for the following fees.
Within 250 miles of Albuquerque, NM: $350.00
Within 250+ to 450 miles of Albuquerque, NM: $500
Within 450+ to 750 miles of Albuquerque, NM: $800
Within 750+ to 950 miles of Albuquerque, NM: $1100
Contact this Seller (Mark Levin):
(* denotes required fields)