Used Edgebander with Pre-Mill Biesse
Listing #517644 Listed on: 05/23
|Listing Type:||Machine for Sale|
|Category:||Edge Banders Over $20K|
|Edgebanding thickness: .4mm to 3 mm in rolls, .4 mm to 8 mm in strips|
Guillotine capacity: 3mm
Panel height: 3/8" min to 2-3/8" max.
Minimum panel length: 5-7/8"
Minimum panel width (with length 5-7/8"): 3-5/16"
Minimum panel width (with length 9-13/16"): 2"
Feed speed: 39 FPM
Control system: Selectors to enable working units, included two displays for the managing and displaying of the temperature of the glue pot and glue roller
Pre-milling station:(2) 2.0 HP 12,000 RPM motors, to rectify/clean panels already sized
Strip feed magazine
Quick change glue pot with 2 Kg capacity
Pressure station with driven roller and (2) spring loaded idle rollers
End trimming station with (2) independent 1 HP 12,000 RPM motors with pneumatic device for preselection of straight or tilted cut of the edge from the control panel
Top and bottom trim station composed of (2) independent 0.87 HP 12,000 RPM motors with multi-profile cutters
Profile scraping unit designed to remove knife marks, equipped with pneumatic in/out positioning through controller
Glue scraping unit eliminates any excess glue
Buffing unit consisting of (2) independent 0.49 HP 2,800 RPM motors
Air requirements: 7 Bar
Dust collection: (6) 100 mm outlets
Voltage: Multi-tap transformer provided for 230 or 460 volt operation
Machine dimensions: 49" W x 165" L x 68" T
Machine weight: 3,650 lbs.
Cleaned and Checked with Warranty
Contact this Seller (Andy Shook):
(* denotes required fields)