|Home » Forums » Adhesives » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
PUR edge banding adhesives3/31
Have new holz -her bander 1329 sprint.Would like to know any one out there using PUR ? are benefits worth extra clean up, price ect. Concerned about cleanup &
Why do you want to use PUR? Are you making parts that are in a high moisture environment?
We have used PUR and unless you have some compelling reason I would avoid it.
For any problems or feedback from the customers,we will reply patiently and meticulously in time.
I have a Pur hot glue gun which I never use anymore. It leaves a black line at the joint. I have not used it in many years. They might have resolved that issue.
PUR Is a great product it offers thinner glue lines, water resistance, heat resistance and if you want to take the banding off after full cure, you need a table saw. I never recommend it for small shops unless they run the bander all day long. Must be cleaned at the end of day by purging glue system, if you for get to clean it over the weekend it will set like cement in your glue system, specially where there is high humidity.
Better stick to regular EVA if small shop