|Home » Forums » Architectural Woodworking » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
Wall Panel Hardware8/4
Could someone point me in the direction of a supplier of various types of hardware/clips for mounting wall panels? These are for a bunch of 1/2" thick x 12"w x 36" long dimensional wall tiles. We can groove the edges of the tiles accordingly. Picture is an idea of what we were thinking with screws through the holes into the wall behind.
Monarch Metal. We use Z-Clips for stuff like this but they make other clips as well.
Check these out. Available from Hafele
We recently installed a wall system using Star hangers. They have a variety of different hangers. https://www.starhanger.com/
PSI Makes wall systems for thin panels in a variety of reveals and edges. Its progressive system so be sure to plan accordingly.
If you can't find a suitable clip from a commercial source, you could make a clip like the one you show. You could make it from an "H" shaped aluminum extrusion by trimming off the flanges with a table saw, cutting to length, and drilling and countersinking the screw holes.