|Home » Forums » Cabinetmaking » Message||Login|
You are not logged in. Consider these WOODWEB Member advantages:
I'm getting ready to pull the trigger on a new edgebander and was hoping to get a little bit of feedback. Of course, everybody's machine is the "best", so salesman are no help.
I currently own a Brandt KDN 330 that I purchased new in 2006. It has been a reliable machine, but we need the ability to change glue quickly. I am only considering 2 different brands of machines, Brandt and Holzher. If I'm going to stick with gluepots, I'm going to stick with a brand I know and trust. So this is really about the difference between glue pots and the quality of Brandt vs cartridge glue and the quality of Holzher.
Question 1: For those of you with newer Brandts, they claim the glue line on their new machines is so good, I won't need to change glue colors. True or false?
Question 2: For those of you with late model Holzhers, how happy are you with the glue jet application system?
Question 3: If I insist on changing my glue on a Brandt, evidently they have the ability to change out glue pots quickly and easily. In reality, is this true or false.
Question 4: For those of you who have servo controls, is it simply push a button or do you have to run test pieces and make adjustments just like you would if you didn't have servo controls.
Question 5: For those of you who have owned or operated both Holzher and Brandt in the last 5 or 10 years, is there any noticeable difference in quality?
We run a Holzher with the cartridge system and have absolutely loved it. The glue lines are extremely clean - even the high gloss material turns out fabulous! I stick with the "natural" cartridge color and have never changed...Also, clean up is a cinch and no glue pots to deal with. You also have the option to switch to PUR - very easy with no mess. I really worried about my bander purchase because of all the headaches I kept hearing about from shop owners about banders in general. This one has proved to be one of the most reliable tools in my shop.
I don't think I'd mess with changing colors. Just use clear and set your machine for a very tight glue line. Your Brandt should work fine. We've got both Holz Her & IDM and never change glue colors. If you are that concerned, by a machine that can put on the laser banding. Many of them can be switched between pot and laser/hot air.
Pre-mil and routine maintenance will get you the best glue line. A lot of the glue line you see is where glue has filled the scoring blade bevel. Pre-mil will machine that bevel away and give you a great edge without changing pots.
1. I have been told by many that there is no need to change the glue colors, however when running dark colors using a dark glue works the best for me. There will also be a glue line unless using the new zero edge machines.
2. have no idea. I have never seen them.
3. my older brandt it is not so easy and needs to be planned for. I saw a glue pot changeout on a Biesse in less than 2 minutes a few months ago. Quite impressive.
4. I dont have this yet, but saw a change from wood strips to, thin tape to 3ml at the same demo and the accuracy was perfect.
5. Again no idea on holz her. I'm not sold on the new brandts yet, doesn't appear they have fixed their gates on the glue pot yet and they seem lighter than my older one once you open the hood.
We have a SCM and HolzHer and never change glue color. The glue pot change takes no time but you still need for the new pot to heat up before you can run.
Question 1: True for us using a 1650 Ambition, the glue line is so much smaller the need for different colors isn't there for us.
Question 2: N/A
Question 3: Don't have any idea
Question 5: NA